Skip to contentSkip to conversation

Fix typo

PATCH Applied Andrea Gelmini 3 participants 3 messages May 21, 2016 – Jun 10, 2016

Subsystems (3)
Arm (32-bit) Arm sub-architectures OMAP2+ support
lore
Share & tools
lore

Andrea Gelmini

author
#0 lore raw

PATCH 108/1529 Fix typo

Signed-off-by Andrea Gelmini <[email protected]>
---
 arch/arm/mach-omap2/sdrc.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/mach-omap2/sdrc.h +2 -2
index 645a2a4..f115006 100644
@@ -175,8 +175,8 @@ u32 omap2xxx_sdrc_reprogram(u32 level, u32 force);
  * don't adjust it down as your clock period increases the refresh interval
  * will not be met. Setting all parameters for complete worst case may work,
  * but may cut memory performance by 2x. Due to errata the DLLs need to be
- * unlocked and their value needs run time calibration.	A dynamic call is
- * need for that as no single right value exists acorss production samples.
+ * unlocked and their value needs run time calibration. A dynamic call is
+ * need for that as no single right value exists across production samples.
  *
  * Only the FULL speed values are given. Current code is such that rate
  * changes must be made at DPLLoutx2. The actual value adjustment for low
Signature · 1 line
2.8.2.534.g1f66975
#1 lore raw

PATCH 108/1529 Fix typo

Quoted 10 lines · Andrea Gelmini
Signed-off-by Andrea Gelmini <[email protected]>
---
  arch/arm/mach-omap2/sdrc.h | 4 ++--
  1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/mach-omap2/sdrc.h +0 -0
index 645a2a4..f115006 100644

arch/arm/mach-omap2/sdrc.h u32 omap2xxx_sdrc_reprogram(u32 level, u32 force); · line 179

Quoted 7 lines
arch/arm/mach-omap2/sdrc.h +2 -2
@@ -175,8 +175,8 @@ u32 omap2xxx_sdrc_reprogram(u32 level, u32 force);
   * don't adjust it down as your clock period increases the refresh interval
   * will not be met. Setting all parameters for complete worst case may work,
   * but may cut memory performance by 2x. Due to errata the DLLs need to be
- * unlocked and their value needs run time calibration.	A dynamic call is
- * need for that as no single right value exists acorss production samples.
+ * unlocked and their value needs run time calibration. A dynamic call is
+ * need for that as no single right value exists across production samples.

needed?

Quoted 4 lines
arch/arm/mach-omap2/sdrc.h +0 -0
   *
   * Only the FULL speed values are given. Current code is such that rate
   * changes must be made at DPLLoutx2. The actual value adjustment for low
maintainer
#2 lore raw

PATCH 108/1529 Fix typo

In reply to Andrea Gelmini

arch/arm/mach-omap2/sdrc.h u32 omap2xxx_sdrc_reprogram(u32 level, u32 force); · line 179

Quoted 10 lines · Andrea Gelmini
arch/arm/mach-omap2/sdrc.h +2 -2
@@ -175,8 +175,8 @@ u32 omap2xxx_sdrc_reprogram(u32 level, u32 force);
  * don't adjust it down as your clock period increases the refresh interval
  * will not be met. Setting all parameters for complete worst case may work,
  * but may cut memory performance by 2x. Due to errata the DLLs need to be
- * unlocked and their value needs run time calibration.	A dynamic call is
- * need for that as no single right value exists acorss production samples.
+ * unlocked and their value needs run time calibration. A dynamic call is
+ * need for that as no single right value exists across production samples.

Applying patches 102 - 108 into omap-for-v4.8/soc thanks.

Tony