ARM: dts: dra72-evm: Rename 3.3V regulator tag
PATCH 1/1 ARM: dts: dra72-evm: Rename 3.3V regulator tag
Rename the tag of the 3.3 V regulator used in the DRA72 EVM in order to have a consistent tag name with the DRA7 EVM. This is useful when the regulator needs to be referenced in common dtsi files (i.e. for common companion boards like JAMR3 [1]).
[1] http://www.ti.com.cn/cn/lit/ug/sprui52/sprui52.pdf
Signed-off-by Misael Lopez Cruz <[email protected]>
--- arch/arm/boot/dts/dra72-evm-common.dtsi | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
arch/arm/boot/dts/dra72-evm-common.dtsi +6 -6
@@ -18,7 +18,7 @@ display0 = &hdmi0; }; - evm_3v3: fixedregulator-evm_3v3 { + evm_3v3_sw: fixedregulator-evm_3v3 { compatible = "regulator-fixed"; regulator-name = "evm_3v3"; regulator-min-microvolt = <3300000>;
@@ -29,7 +29,7 @@ /* TPS77018DBVT */ compatible = "regulator-fixed"; regulator-name = "aic_dvdd"; - vin-supply = <&evm_3v3>; + vin-supply = <&evm_3v3_sw>; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; };
@@ -414,9 +414,9 @@ status = "okay"; /* Regulators */ - AVDD-supply = <&evm_3v3>; - IOVDD-supply = <&evm_3v3>; - DRVDD-supply = <&evm_3v3>; + AVDD-supply = <&evm_3v3_sw>; + IOVDD-supply = <&evm_3v3_sw>; + DRVDD-supply = <&evm_3v3_sw>; DVDD-supply = <&aic_dvdd>; }; };
@@ -597,7 +597,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins_default>; - vmmc-supply = <&evm_3v3>; + vmmc-supply = <&evm_3v3_sw>; bus-width = <8>; ti,non-removable; max-frequency = <192000000>;
Signature · 1 line
1.7.9.5
PATCH 1/1 ARM: dts: dra72-evm: Rename 3.3V regulator tag
Quoted 4 lines · Misael Lopez Cruz
Rename the tag of the 3.3 V regulator used in the DRA72 EVM in order to have a consistent tag name with the DRA7 EVM. This is useful when the regulator needs to be referenced in common dtsi files (i.e. for common companion boards like JAMR3 [1]).
Applying into omap-for-v4.8/dt thanks.
Tony