Skip to contentSkip to conversation

ARM: dts: imx6: add support for Auvidea H100 board

PATCH New Lucas Stach 2 participants 2 messages Jun 3, 2016 – Jun 11, 2016

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 ARM: dts: imx6: add support for Auvidea H100 board

The Auvidea H100 is a baseboard for the SolidRun MicroSOM. Its primary feature is a Toshiba TC358743 HDMI to CSI decoder, allowing the board to work as HDMI passthrough and framegrabber.

---
v2: Correct regulator GPIO flags.

---
 arch/arm/boot/dts/Makefile       |   1 +
 arch/arm/boot/dts/imx6q-h100.dts | 395 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 396 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6q-h100.dts
arch/arm/boot/dts/Makefile +1 -0
index 06b6c2d695bf..4f936106f696 100644
@@ -356,6 +356,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6q-gw54xx.dtb \
 	imx6q-gw551x.dtb \
 	imx6q-gw552x.dtb \
+	imx6q-h100.dtb \
 	imx6q-hummingboard.dtb \
 	imx6q-icore-rqs.dtb \
 	imx6q-marsboard.dtb \
arch/arm/boot/dts/imx6q-h100.dts new file +395 -0

395 lines not on this page · raw message

Signature · 1 line
2.8.1
Applied
#1 lore raw

PATCH v2 1/1 ARM: dts: imx6: add support for Auvidea H100 board

Quoted 5 lines · Lucas Stach

The Auvidea H100 is a baseboard for the SolidRun MicroSOM. Its primary feature is a Toshiba TC358743 HDMI to CSI decoder, allowing the board to work as HDMI passthrough and framegrabber.

Applied, thanks.