ARM: dts: sun8i: Add dts file for Polaroid MID2407PXE03 tablet

The Polaroid MID2407PXE03 is an a23 based 7" tablet based on a M86_MB V2.0 PCB, featuring a 800x480 LCD, 512MB RAM, 4G NAND, esp8089 wifi, gsl1680 touchschreen, micro-sd slot, 3.5mm headphone jack and a micro-usb otg connector which doubles as charging port.

---
 arch/arm/boot/dts/Makefile                         |   1 +
 .../boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts   | 292 +++++++++++++++++++++
 2 files changed, 293 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts

index 970e906..8223602 100644
@@ -753,6 +753,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-a23-gt90h-v4.dtb \
 	sun8i-a23-ippo-q8h-v5.dtb \
 	sun8i-a23-ippo-q8h-v1.2.dtb \
+	sun8i-a23-polaroid-mid2407pxe03.dtb \
 	sun8i-a23-polaroid-mid2809pxe04.dtb \
 	sun8i-a23-q8-tablet.dtb \
 	sun8i-a33-et-q8-v1.6.dtb \

2.7.4

Applied, thanks!
Maxime

Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160611/6d794e56/attachment.sig>

Hi,

It seems this tablet is very similar to the Q8s, differing only in the WiFi solution (which we have to deal with for the Q8s anyway), and the touchscreen firmware.

Should we somehow manage this using the q8-common and q8-tablet dts files?

Same comment for reg_drivevbus as the other patches.

Regards
ChenYu