Skip to contentSkip to conversation

drm/i915: Small compaction of the engine init code

PATCH Superseded Tvrtko Ursulin 3 participants 21 messages Jun 22, 2016 – Jun 24, 2016

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 drm/i915: Small compaction of the engine init code

From: Tvrtko Ursulin <[email protected]>

Effectively removes one layer of indirection between the mask of possible engines and the engine constructors. Instead of spelling out in code the mapping of HAS_<engine> to constructors, makes more use of the recently added data driven approach by putting engine constructor vfuncs into the table as well.

Effect is fewer lines of source and smaller binary.

At the same time simplify the error handling since engine destructors can run on unitialized engines anyway.

Similar approach could be done for legacy submission is wanted.

---
 drivers/gpu/drm/i915/intel_lrc.c | 107 +++++++++++++--------------------------
 1 file changed, 36 insertions(+), 71 deletions(-)
drivers/gpu/drm/i915/intel_lrc.c +36 -71
index debed011a958..619be2a9d5d1 100644
@@ -2016,12 +2016,16 @@ lrc_setup_hws(struct intel_engine_cs *engine,
 	return 0;
 }
 
+static int logical_render_ring_init(struct intel_engine_cs *engine);
+static int logical_ring_init(struct intel_engine_cs *engine);
+
 static const struct logical_ring_info {
 	const char *name;
 	unsigned exec_id;
 	unsigned guc_id;
 	u32 mmio_base;
 	unsigned irq_shift;
+	int (*init)(struct intel_engine_cs *engine);
 } logical_rings[] = {
 	[RCS] = {
 		.name = "render ring",
@@ -2029,6 +2033,7 @@ static const struct logical_ring_info {
 		.guc_id = GUC_RENDER_ENGINE,
 		.mmio_base = RENDER_RING_BASE,
 		.irq_shift = GEN8_RCS_IRQ_SHIFT,
+		.init = logical_render_ring_init,
 	},
 	[BCS] = {
 		.name = "blitter ring",
@@ -2036,6 +2041,7 @@ static const struct logical_ring_info {
 		.guc_id = GUC_BLITTER_ENGINE,
 		.mmio_base = BLT_RING_BASE,
 		.irq_shift = GEN8_BCS_IRQ_SHIFT,
+		.init = logical_ring_init,
 	},
 	[VCS] = {
 		.name = "bsd ring",
@@ -2043,6 +2049,7 @@ static const struct logical_ring_info {
 		.guc_id = GUC_VIDEO_ENGINE,
 		.mmio_base = GEN6_BSD_RING_BASE,
 		.irq_shift = GEN8_VCS1_IRQ_SHIFT,
+		.init = logical_ring_init,
 	},
 	[VCS2] = {
 		.name = "bsd2 ring",
@@ -2050,6 +2057,7 @@ static const struct logical_ring_info {
 		.guc_id = GUC_VIDEO_ENGINE2,
 		.mmio_base = GEN8_BSD2_RING_BASE,
 		.irq_shift = GEN8_VCS2_IRQ_SHIFT,
+		.init = logical_ring_init,
 	},
 	[VECS] = {
 		.name = "video enhancement ring",
@@ -2057,14 +2065,14 @@ static const struct logical_ring_info {
 		.guc_id = GUC_VIDEOENHANCE_ENGINE,
 		.mmio_base = VEBOX_RING_BASE,
 		.irq_shift = GEN8_VECS_IRQ_SHIFT,
+		.init = logical_ring_init,
 	},
 };
 
 static struct intel_engine_cs *
-logical_ring_setup(struct drm_device *dev, enum intel_engine_id id)
+logical_ring_setup(struct drm_i915_private *dev_priv, enum intel_engine_id id)
 {
 	const struct logical_ring_info *info = &logical_rings[id];
-	struct drm_i915_private *dev_priv = to_i915(dev);
 	struct intel_engine_cs *engine = &dev_priv->engine[id];
 	enum forcewake_domains fw_domains;
 
@@ -2107,7 +2115,7 @@ logical_ring_setup(struct drm_device *dev, enum intel_engine_id id)
 	logical_ring_default_irqs(engine, info->irq_shift);
 
 	intel_engine_init_hangcheck(engine);
-	i915_gem_batch_pool_init(dev, &engine->batch_pool);
+	i915_gem_batch_pool_init(dev_priv->dev, &engine->batch_pool);
 
 	return engine;
 }
@@ -2148,16 +2156,16 @@ error:
 	return ret;
 }
 
-static int logical_render_ring_init(struct drm_device *dev)
+static int logical_render_ring_init(struct intel_engine_cs *engine)
 {
-	struct intel_engine_cs *engine = logical_ring_setup(dev, RCS);
+	struct drm_i915_private *dev_priv = engine->i915;
 	int ret;
 
-	if (HAS_L3_DPF(dev))
+	if (HAS_L3_DPF(dev_priv))
 		engine->irq_keep_mask |= GT_RENDER_L3_PARITY_ERROR_INTERRUPT;
 
 	/* Override some for render ring. */
-	if (INTEL_INFO(dev)->gen >= 9)
+	if (INTEL_GEN(dev_priv) >= 9)
 		engine->init_hw = gen9_init_render_ring;
 	else
 		engine->init_hw = gen8_init_render_ring;
@@ -2189,87 +2197,44 @@ static int logical_render_ring_init(struct drm_device *dev)
 	return ret;
 }
 
-static int logical_bsd_ring_init(struct drm_device *dev)
-{
-	struct intel_engine_cs *engine = logical_ring_setup(dev, VCS);
-
-	return logical_ring_init(engine);
-}
-
-static int logical_bsd2_ring_init(struct drm_device *dev)
-{
-	struct intel_engine_cs *engine = logical_ring_setup(dev, VCS2);
-
-	return logical_ring_init(engine);
-}
-
-static int logical_blt_ring_init(struct drm_device *dev)
-{
-	struct intel_engine_cs *engine = logical_ring_setup(dev, BCS);
-
-	return logical_ring_init(engine);
-}
-
-static int logical_vebox_ring_init(struct drm_device *dev)
-{
-	struct intel_engine_cs *engine = logical_ring_setup(dev, VECS);
-
-	return logical_ring_init(engine);
-}
-
 /**
  * intel_logical_rings_init() - allocate, populate and init the Engine Command Streamers
  * @dev: DRM device.
  *
- * This function inits the engines for an Execlists submission style (the equivalent in the
- * legacy ringbuffer submission world would be i915_gem_init_engines). It does it only for
- * those engines that are present in the hardware.
+ * This function inits the engines for an Execlists submission style (the
+ * equivalent in the legacy ringbuffer submission world would be
+ * i915_gem_init_engines). It does it only for those engines that are present in
+ * the hardware.
  *
  * Return: non-zero if the initialization failed.
  */
 int intel_logical_rings_init(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_engine_cs *engine;
+	unsigned int i;
 	int ret;
 
-	ret = logical_render_ring_init(dev);
-	if (ret)
-		return ret;
+	BUILD_BUG_ON((1 << RCS) != RENDER_RING);
+	BUILD_BUG_ON((1 << BCS) != BLT_RING);
+	BUILD_BUG_ON((1 << VCS) != BSD_RING);
+	BUILD_BUG_ON((1 << VCS2) != BSD2_RING);
+	BUILD_BUG_ON((1 << VECS) != VEBOX_RING);
 
-	if (HAS_BSD(dev)) {
-		ret = logical_bsd_ring_init(dev);
-		if (ret)
-			goto cleanup_render_ring;
-	}
-
-	if (HAS_BLT(dev)) {
-		ret = logical_blt_ring_init(dev);
-		if (ret)
-			goto cleanup_bsd_ring;
-	}
-
-	if (HAS_VEBOX(dev)) {
-		ret = logical_vebox_ring_init(dev);
-		if (ret)
-			goto cleanup_blt_ring;
-	}
-
-	if (HAS_BSD2(dev)) {
-		ret = logical_bsd2_ring_init(dev);
-		if (ret)
-			goto cleanup_vebox_ring;
+	for (i = 0; i < I915_NUM_ENGINES; i++) {
+		if (dev_priv->info.ring_mask & (1 << i)) {
+			engine = logical_ring_setup(dev_priv, i);
+			ret = logical_rings[i].init(engine);
+			if (ret)
+				goto cleanup;
+		}
 	}
 
 	return 0;
 
-cleanup_vebox_ring:
-	intel_logical_ring_cleanup(&dev_priv->engine[VECS]);
-cleanup_blt_ring:
-	intel_logical_ring_cleanup(&dev_priv->engine[BCS]);
-cleanup_bsd_ring:
-	intel_logical_ring_cleanup(&dev_priv->engine[VCS]);
-cleanup_render_ring:
-	intel_logical_ring_cleanup(&dev_priv->engine[RCS]);
+cleanup:
+	for (i = 0; i < I915_NUM_ENGINES; i++)
+		intel_logical_ring_cleanup(&dev_priv->engine[i]);
 
 	return ret;
 }
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v1 1/1
#1 lore raw
Quoted 8 lines · Tvrtko Ursulin

From: Tvrtko Ursulin <[email protected]>

Effectively removes one layer of indirection between the mask of possible engines and the engine constructors. Instead of spelling out in code the mapping of HAS_<engine> to constructors, makes more use of the recently added data driven approach by putting engine constructor vfuncs into the table as well.

Quoted 6 lines

Effect is fewer lines of source and smaller binary.

At the same time simplify the error handling since engine destructors can run on unitialized engines anyway.

Similar approach could be done for legacy submission is wanted.

Yup, long term plan is to reduce as much as the needless duplication between the two/three (and kill of the dev_priv->gt.init_rings and friends). Muttering was even afoot to seperate the legacy submission code from the ring handling.

Quoted 2 lines
Quoted 20 lines

---
/**
* intel_logical_rings_init() - allocate, populate and init the Engine Command Streamers
* @dev: DRM device.
*
- * This function inits the engines for an Execlists submission style (the equivalent in the
- * legacy ringbuffer submission world would be i915_gem_init_engines). It does it only for
- * those engines that are present in the hardware.
+ * This function inits the engines for an Execlists submission style (the
+ * equivalent in the legacy ringbuffer submission world would be
+ * i915_gem_init_engines). It does it only for those engines that are present in
+ * the hardware.
*
* Return: non-zero if the initialization failed.
*/
int intel_logical_rings_init(struct drm_device *dev)
{

drivers/gpu/drm/i915/intel_lrc.c +2 -0
 	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_engine_cs *engine;
+	unsigned int i;

drivers/gpu/drm/i915/intel_lrc.c static int logical_render_ring_init(struct drm_device *dev) · line 2222

Quoted 10 lines
drivers/gpu/drm/i915/intel_lrc.c +5 -3
 	int ret;
 
-	ret = logical_render_ring_init(dev);
-	if (ret)
-		return ret;
+	BUILD_BUG_ON((1 << RCS) != RENDER_RING);
+	BUILD_BUG_ON((1 << BCS) != BLT_RING);
+	BUILD_BUG_ON((1 << VCS) != BSD_RING);
+	BUILD_BUG_ON((1 << VCS2) != BSD2_RING);
+	BUILD_BUG_ON((1 << VECS) != VEBOX_RING);

Heh, isn't that the very definition of those in the header. Planning for some array compaction?
-Chris

Signature · 5 lines
Chris Wilson, Intel Open Source Technology Centre
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#2 lore raw
Quoted 47 lines · Chris Wilson
Quoted 8 lines · Tvrtko Ursulin

From: Tvrtko Ursulin <[email protected]>

Effectively removes one layer of indirection between the mask of possible engines and the engine constructors. Instead of spelling out in code the mapping of HAS_<engine> to constructors, makes more use of the recently added data driven approach by putting engine constructor vfuncs into the table as well.

Quoted 6 lines

Effect is fewer lines of source and smaller binary.

At the same time simplify the error handling since engine destructors can run on unitialized engines anyway.

Similar approach could be done for legacy submission is wanted.

Yup, long term plan is to reduce as much as the needless duplication between the two/three (and kill of the dev_priv->gt.init_rings and friends). Muttering was even afoot to seperate the legacy submission code from the ring handling.

Quoted 2 lines
Quoted 22 lines

---
/**
* intel_logical_rings_init() - allocate, populate and init the Engine Command Streamers
* @dev: DRM device.
*
- * This function inits the engines for an Execlists submission style (the equivalent in the
- * legacy ringbuffer submission world would be i915_gem_init_engines). It does it only for
- * those engines that are present in the hardware.
+ * This function inits the engines for an Execlists submission style (the
+ * equivalent in the legacy ringbuffer submission world would be
+ * i915_gem_init_engines). It does it only for those engines that are present in
+ * the hardware.
*
* Return: non-zero if the initialization failed.
*/
int intel_logical_rings_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;

drivers/gpu/drm/i915/intel_lrc.c +2 -0
+	struct intel_engine_cs *engine;
+	unsigned int i;
  	int ret;
Quoted 11 lines

drivers/gpu/drm/i915/intel_lrc.c static int logical_render_ring_init(struct drm_device *dev) · line 2222

Quoted 8 lines
drivers/gpu/drm/i915/intel_lrc.c +5 -3
-	ret = logical_render_ring_init(dev);
-	if (ret)
-		return ret;
+	BUILD_BUG_ON((1 << RCS) != RENDER_RING);
+	BUILD_BUG_ON((1 << BCS) != BLT_RING);
+	BUILD_BUG_ON((1 << VCS) != BSD_RING);
+	BUILD_BUG_ON((1 << VCS2) != BSD2_RING);
+	BUILD_BUG_ON((1 << VECS) != VEBOX_RING);

Heh, isn't that the very definition of those in the header. Planning for some array compaction?

No I was trying to protect against someone changing the definitions of RENDER_RING & co since the loop below this depends on that. Maybe it was too paranoid. Or maybe better, I could add HAS_ENGINE(id) and cement that in one place instead of this many BUILD_BUG_ONs.

I'll respin anyway to remove forward decls which can be avoided with some reshuffle.

Regards,

Tvrtko
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#3 lore raw
Quoted 12 lines · Tvrtko Ursulin
Quoted 9 lines · Chris Wilson

drivers/gpu/drm/i915/intel_lrc.c static int logical_render_ring_init(struct drm_device *dev) · line 2222

Quoted 5 lines · Tvrtko Ursulin
drivers/gpu/drm/i915/intel_lrc.c +5 -0
+	BUILD_BUG_ON((1 << RCS) != RENDER_RING);
+	BUILD_BUG_ON((1 << BCS) != BLT_RING);
+	BUILD_BUG_ON((1 << VCS) != BSD_RING);
+	BUILD_BUG_ON((1 << VCS2) != BSD2_RING);
+	BUILD_BUG_ON((1 << VECS) != VEBOX_RING);

Heh, isn't that the very definition of those in the header. Planning for some array compaction?

Quoted 4 lines

No I was trying to protect against someone changing the definitions of RENDER_RING & co since the loop below this depends on that. Maybe it was too paranoid. Or maybe better, I could add HAS_ENGINE(id) and cement that in one place instead of this many BUILD_BUG_ONs.

Hmm, the logical_rings[] table is ordered by id, so it should be in the same order as the mask. It is probably going to be safer to remove the RENDER_RING et al and replace them with BIT(RCS) when making the masks.
-Chris

Signature · 5 lines
Chris Wilson, Intel Open Source Technology Centre
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#4 lore raw

PATCH v2 1/1 drm/i915: Small compaction of the engine init code

In reply to Tvrtko Ursulin

From: Tvrtko Ursulin <[email protected]>

Effectively removes one layer of indirection between the mask of possible engines and the engine constructors. Instead of spelling out in code the mapping of HAS_<engine> to constructors, makes more use of the recently added data driven approach by putting engine constructor vfuncs into the table as well.

Effect is fewer lines of source and smaller binary.

At the same time simplify the error handling since engine destructors can run on unitialized engines anyway.

Similar approach could be done for legacy submission is wanted.

v2: Removed ugly BUILD_BUG_ONs in favour of newly introduced
ENGINE_MASK and HAS_ENGINE macros.
Also removed the forward declarations by shuffling functions around.

---
 drivers/gpu/drm/i915/i915_drv.h  |  27 +++--
 drivers/gpu/drm/i915/intel_lrc.c | 246 ++++++++++++++++-----------------------
 2 files changed, 117 insertions(+), 156 deletions(-)
drivers/gpu/drm/i915/i915_drv.h +16 -11
index 74d0a61de75a..6d96b14b53c8 100644
@@ -2759,17 +2759,22 @@ struct drm_i915_cmd_table {
 #define IS_GEN8(dev)	(INTEL_INFO(dev)->gen_mask & BIT(7))
 #define IS_GEN9(dev)	(INTEL_INFO(dev)->gen_mask & BIT(8))
 
-#define RENDER_RING		(1<<RCS)
-#define BSD_RING		(1<<VCS)
-#define BLT_RING		(1<<BCS)
-#define VEBOX_RING		(1<<VECS)
-#define BSD2_RING		(1<<VCS2)
-#define ALL_ENGINES		(~0)
-
-#define HAS_BSD(dev)		(INTEL_INFO(dev)->ring_mask & BSD_RING)
-#define HAS_BSD2(dev)		(INTEL_INFO(dev)->ring_mask & BSD2_RING)
-#define HAS_BLT(dev)		(INTEL_INFO(dev)->ring_mask & BLT_RING)
-#define HAS_VEBOX(dev)		(INTEL_INFO(dev)->ring_mask & VEBOX_RING)
+#define ENGINE_MASK(id)	BIT(id)
+#define RENDER_RING	ENGINE_MASK(RCS)
+#define BSD_RING	ENGINE_MASK(VCS)
+#define BLT_RING	ENGINE_MASK(BCS)
+#define VEBOX_RING	ENGINE_MASK(VECS)
+#define BSD2_RING	ENGINE_MASK(VCS2)
+#define ALL_ENGINES	(~0)
+
+#define HAS_ENGINE(dev_priv, id) \
+	(INTEL_INFO(dev_priv)->ring_mask & ENGINE_MASK(id))
+
+#define HAS_BSD(dev_priv)	HAS_ENGINE(dev_priv, VCS)
+#define HAS_BSD2(dev_priv)	HAS_ENGINE(dev_priv, VCS2)
+#define HAS_BLT(dev_priv)	HAS_ENGINE(dev_priv, BCS)
+#define HAS_VEBOX(dev_priv)	HAS_ENGINE(dev_priv, VECS)
+
 #define HAS_LLC(dev)		(INTEL_INFO(dev)->has_llc)
 #define HAS_SNOOP(dev)		(INTEL_INFO(dev)->has_snoop)
 #define HAS_EDRAM(dev)		(__I915__(dev)->edram_cap & EDRAM_ENABLED)
drivers/gpu/drm/i915/intel_lrc.c +101 -145

320 lines not on this page · raw message

Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v2 1/1
#5 lore raw
Quoted 15 lines · Tvrtko Ursulin

From: Tvrtko Ursulin <[email protected]>

Effectively removes one layer of indirection between the mask of possible engines and the engine constructors. Instead of spelling out in code the mapping of HAS_<engine> to constructors, makes more use of the recently added data driven approach by putting engine constructor vfuncs into the table as well.

Effect is fewer lines of source and smaller binary.

At the same time simplify the error handling since engine destructors can run on unitialized engines anyway.

Similar approach could be done for legacy submission is wanted.

Quoted 7 lines

v2: Removed ugly BUILD_BUG_ONs in favour of newly introduced
ENGINE_MASK and HAS_ENGINE macros.
Also removed the forward declarations by shuffling functions around.

Quoted 24 lines

int intel_logical_rings_init(struct drm_device *dev) {

drivers/gpu/drm/i915/intel_lrc.c +2 -17
 	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_engine_cs *engine;
+	unsigned int i;
 	int ret;
 
-	ret = logical_render_ring_init(dev);
-	if (ret)
-		return ret;
-
-	if (HAS_BSD(dev)) {
-		ret = logical_bsd_ring_init(dev);
-		if (ret)
-			goto cleanup_render_ring;
-	}
-
-	if (HAS_BLT(dev)) {
-		ret = logical_blt_ring_init(dev);
-		if (ret)
-			goto cleanup_bsd_ring;
-	}
-
-	if (HAS_VEBOX(dev)) {

drivers/gpu/drm/i915/intel_lrc.c logical_ring_setup(struct drm_device *dev, enum intel_engine_id id) · line 2215

Quoted 10 lines
drivers/gpu/drm/i915/intel_lrc.c +1 -9
-		ret = logical_vebox_ring_init(dev);
-		if (ret)
-			goto cleanup_blt_ring;
-	}
-
-	if (HAS_BSD2(dev)) {
-		ret = logical_bsd2_ring_init(dev);
-		if (ret)
-			goto cleanup_vebox_ring;
+	for (i = 0; i < I915_NUM_ENGINES; i++) {

One more thing to consider is that logical_rings[] has an unspecified size. Either we set NUM_ENGINES there or use ARRAY_SIZE here, either way we risk not initialising all engines we expect.

I think we need:
unsigned mask = 0;

drivers/gpu/drm/i915/intel_lrc.c logical_ring_setup(struct drm_device *dev, enum intel_engine_id id) · line 2220

Quoted 5 lines
drivers/gpu/drm/i915/intel_lrc.c +5 -0
+		if (HAS_ENGINE(dev_priv, i)) {
+			engine = logical_ring_setup(dev_priv, i);
+			ret = logical_rings[i].init(engine);
+			if (ret)
+				goto cleanup;
			mask |= intel_engine_flag(engine);

drivers/gpu/drm/i915/intel_lrc.c logical_ring_setup(struct drm_device *dev, enum intel_engine_id id) · line 2222

Quoted 2 lines
drivers/gpu/drm/i915/intel_lrc.c +1 -0
+		}
 	}

if (WARN_ON(mask != dev_priv->info.rings_mask))

	mkwrite_intel_info(dev_priv)->rings_mask = mask;

To catch any future forgotten additions without exploding. -Chris

Signature · 5 lines
Chris Wilson, Intel Open Source Technology Centre
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#6 lore raw
Quoted 73 lines · Chris Wilson
Quoted 15 lines · Tvrtko Ursulin

From: Tvrtko Ursulin <[email protected]>

Effectively removes one layer of indirection between the mask of possible engines and the engine constructors. Instead of spelling out in code the mapping of HAS_<engine> to constructors, makes more use of the recently added data driven approach by putting engine constructor vfuncs into the table as well.

Effect is fewer lines of source and smaller binary.

At the same time simplify the error handling since engine destructors can run on unitialized engines anyway.

Similar approach could be done for legacy submission is wanted.

Quoted 7 lines

v2: Removed ugly BUILD_BUG_ONs in favour of newly introduced
ENGINE_MASK and HAS_ENGINE macros.
Also removed the forward declarations by shuffling functions around.

Quoted 24 lines
  int intel_logical_rings_init(struct drm_device *dev)
  {
  	struct drm_i915_private *dev_priv = dev->dev_private;
drivers/gpu/drm/i915/intel_lrc.c +2 -17
+	struct intel_engine_cs *engine;
+	unsigned int i;
  	int ret;
 
-	ret = logical_render_ring_init(dev);
-	if (ret)
-		return ret;
-
-	if (HAS_BSD(dev)) {
-		ret = logical_bsd_ring_init(dev);
-		if (ret)
-			goto cleanup_render_ring;
-	}
-
-	if (HAS_BLT(dev)) {
-		ret = logical_blt_ring_init(dev);
-		if (ret)
-			goto cleanup_bsd_ring;
-	}
-
-	if (HAS_VEBOX(dev)) {

drivers/gpu/drm/i915/intel_lrc.c logical_ring_setup(struct drm_device *dev, enum intel_engine_id id) · line 2215

Quoted 10 lines
drivers/gpu/drm/i915/intel_lrc.c +1 -9
-		ret = logical_vebox_ring_init(dev);
-		if (ret)
-			goto cleanup_blt_ring;
-	}
-
-	if (HAS_BSD2(dev)) {
-		ret = logical_bsd2_ring_init(dev);
-		if (ret)
-			goto cleanup_vebox_ring;
+	for (i = 0; i < I915_NUM_ENGINES; i++) {

One more thing to consider is that logical_rings[] has an unspecified size. Either we set NUM_ENGINES there or use ARRAY_SIZE here, either way we risk not initialising all engines we expect.

I think we need:
unsigned mask = 0;

drivers/gpu/drm/i915/intel_lrc.c logical_ring_setup(struct drm_device *dev, enum intel_engine_id id) · line 2220

Quoted 5 lines
drivers/gpu/drm/i915/intel_lrc.c +5 -0
+		if (HAS_ENGINE(dev_priv, i)) {
+			engine = logical_ring_setup(dev_priv, i);
+			ret = logical_rings[i].init(engine);
+			if (ret)
+				goto cleanup;
			mask |= intel_engine_flag(engine);
Quoted 7 lines

drivers/gpu/drm/i915/intel_lrc.c logical_ring_setup(struct drm_device *dev, enum intel_engine_id id) · line 2222

Quoted 2 lines
drivers/gpu/drm/i915/intel_lrc.c +1 -0
+		}
  	}

if (WARN_ON(mask != dev_priv->info.rings_mask))

	mkwrite_intel_info(dev_priv)->rings_mask = mask;

To catch any future forgotten additions without exploding.

Hm, if logical_rings does not contain all required engines it can either crash or, if somehow it magically manages to initialize it from random data, still pass your test.

Perhaps we just need:

BUILD_BUG_ON(ARRAY_SIZE(logical_rings) == I915_NUM_ENGINES)

?

What is this mkwrite_intel_info thing? There is a facility nowadays to write to the rodata section? :)

Regards,

Tvrtko
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#7 lore raw
Quoted 81 lines · Tvrtko Ursulin
Quoted 79 lines · Chris Wilson
Quoted 15 lines · Tvrtko Ursulin

From: Tvrtko Ursulin <[email protected]>

Effectively removes one layer of indirection between the mask of possible engines and the engine constructors. Instead of spelling out in code the mapping of HAS_<engine> to constructors, makes more use of the recently added data driven approach by putting engine constructor vfuncs into the table as well.

Effect is fewer lines of source and smaller binary.

At the same time simplify the error handling since engine destructors can run on unitialized engines anyway.

Similar approach could be done for legacy submission is wanted.

Quoted 7 lines

v2: Removed ugly BUILD_BUG_ONs in favour of newly introduced
ENGINE_MASK and HAS_ENGINE macros.
Also removed the forward declarations by shuffling functions around.

Quoted 24 lines

int intel_logical_rings_init(struct drm_device *dev) {

drivers/gpu/drm/i915/intel_lrc.c +2 -17
 	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_engine_cs *engine;
+	unsigned int i;
 	int ret;
 
-	ret = logical_render_ring_init(dev);
-	if (ret)
-		return ret;
-
-	if (HAS_BSD(dev)) {
-		ret = logical_bsd_ring_init(dev);
-		if (ret)
-			goto cleanup_render_ring;
-	}
-
-	if (HAS_BLT(dev)) {
-		ret = logical_blt_ring_init(dev);
-		if (ret)
-			goto cleanup_bsd_ring;
-	}
-
-	if (HAS_VEBOX(dev)) {

drivers/gpu/drm/i915/intel_lrc.c logical_ring_setup(struct drm_device *dev, enum intel_engine_id id) · line 2215

Quoted 10 lines
drivers/gpu/drm/i915/intel_lrc.c +1 -9
-		ret = logical_vebox_ring_init(dev);
-		if (ret)
-			goto cleanup_blt_ring;
-	}
-
-	if (HAS_BSD2(dev)) {
-		ret = logical_bsd2_ring_init(dev);
-		if (ret)
-			goto cleanup_vebox_ring;
+	for (i = 0; i < I915_NUM_ENGINES; i++) {

One more thing to consider is that logical_rings[] has an unspecified size. Either we set NUM_ENGINES there or use ARRAY_SIZE here, either way we risk not initialising all engines we expect.

I think we need:
unsigned mask = 0;

drivers/gpu/drm/i915/intel_lrc.c logical_ring_setup(struct drm_device *dev, enum intel_engine_id id) · line 2220

Quoted 5 lines
drivers/gpu/drm/i915/intel_lrc.c +5 -0
+		if (HAS_ENGINE(dev_priv, i)) {
+			engine = logical_ring_setup(dev_priv, i);
+			ret = logical_rings[i].init(engine);
+			if (ret)
+				goto cleanup;
			mask |= intel_engine_flag(engine);

drivers/gpu/drm/i915/intel_lrc.c logical_ring_setup(struct drm_device *dev, enum intel_engine_id id) · line 2222

Quoted 2 lines
drivers/gpu/drm/i915/intel_lrc.c +1 -0
+		}
 	}

if (WARN_ON(mask != dev_priv->info.rings_mask))

	mkwrite_intel_info(dev_priv)->rings_mask = mask;
Quoted 5 lines
Quoted 1 line

To catch any future forgotten additions without exploding.

Hm, if logical_rings does not contain all required engines it can either crash or, if somehow it magically manages to initialize it from random data, still pass your test.

I was expecting you to use if (!init()) continue or something to stop the crash and so leave holes in the mask :)

Quoted 5 lines

Perhaps we just need:

BUILD_BUG_ON(ARRAY_SIZE(logical_rings) == I915_NUM_ENGINES)

?

Yeah, I can't see what more information we can provide other than pointing out the piece of forgotten code. But what if we add new engines to a future submission mechanism that we don't need in execlists?

When the build bug fires, would be the time to consider how to fix it.

Quoted 2 lines

What is this mkwrite_intel_info thing? There is a facility nowadays to write to the rodata section? :)

It's not rodata, intel_info is copied into dev_priv, modified, then treated as const.
-Chris

Signature · 5 lines
Chris Wilson, Intel Open Source Technology Centre
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#8 lore raw

PATCH v3 1/1 drm/i915: Small compaction of the engine init code

From: Tvrtko Ursulin <[email protected]>

Effectively removes one layer of indirection between the mask of possible engines and the engine constructors. Instead of spelling out in code the mapping of HAS_<engine> to constructors, makes more use of the recently added data driven approach by putting engine constructor vfuncs into the table as well.

Effect is fewer lines of source and smaller binary.

At the same time simplify the error handling since engine destructors can run on unitialized engines anyway.

Similar approach could be done for legacy submission is wanted.

v2: Removed ugly BUILD_BUG_ONs in favour of newly introduced
ENGINE_MASK and HAS_ENGINE macros.
Also removed the forward declarations by shuffling functions around.

v3: Warn when logical_rings table does not contain enough data
and disable the engines which could not be initialized. (Chris Wilson)

---
 drivers/gpu/drm/i915/i915_drv.h  |  27 +++--
 drivers/gpu/drm/i915/intel_lrc.c | 256 +++++++++++++++++----------------------
 2 files changed, 129 insertions(+), 154 deletions(-)
drivers/gpu/drm/i915/i915_drv.h +16 -11
index 74d0a61de75a..6d96b14b53c8 100644
@@ -2759,17 +2759,22 @@ struct drm_i915_cmd_table {
 #define IS_GEN8(dev)	(INTEL_INFO(dev)->gen_mask & BIT(7))
 #define IS_GEN9(dev)	(INTEL_INFO(dev)->gen_mask & BIT(8))
 
-#define RENDER_RING		(1<<RCS)
-#define BSD_RING		(1<<VCS)
-#define BLT_RING		(1<<BCS)
-#define VEBOX_RING		(1<<VECS)
-#define BSD2_RING		(1<<VCS2)
-#define ALL_ENGINES		(~0)
-
-#define HAS_BSD(dev)		(INTEL_INFO(dev)->ring_mask & BSD_RING)
-#define HAS_BSD2(dev)		(INTEL_INFO(dev)->ring_mask & BSD2_RING)
-#define HAS_BLT(dev)		(INTEL_INFO(dev)->ring_mask & BLT_RING)
-#define HAS_VEBOX(dev)		(INTEL_INFO(dev)->ring_mask & VEBOX_RING)
+#define ENGINE_MASK(id)	BIT(id)
+#define RENDER_RING	ENGINE_MASK(RCS)
+#define BSD_RING	ENGINE_MASK(VCS)
+#define BLT_RING	ENGINE_MASK(BCS)
+#define VEBOX_RING	ENGINE_MASK(VECS)
+#define BSD2_RING	ENGINE_MASK(VCS2)
+#define ALL_ENGINES	(~0)
+
+#define HAS_ENGINE(dev_priv, id) \
+	(INTEL_INFO(dev_priv)->ring_mask & ENGINE_MASK(id))
+
+#define HAS_BSD(dev_priv)	HAS_ENGINE(dev_priv, VCS)
+#define HAS_BSD2(dev_priv)	HAS_ENGINE(dev_priv, VCS2)
+#define HAS_BLT(dev_priv)	HAS_ENGINE(dev_priv, BCS)
+#define HAS_VEBOX(dev_priv)	HAS_ENGINE(dev_priv, VECS)
+
 #define HAS_LLC(dev)		(INTEL_INFO(dev)->has_llc)
 #define HAS_SNOOP(dev)		(INTEL_INFO(dev)->has_snoop)
 #define HAS_EDRAM(dev)		(__I915__(dev)->edram_cap & EDRAM_ENABLED)
drivers/gpu/drm/i915/intel_lrc.c +113 -143

332 lines not on this page · raw message

Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#9 lore raw
Quoted 15 lines · Tvrtko Ursulin

From: Tvrtko Ursulin <[email protected]>

Effectively removes one layer of indirection between the mask of possible engines and the engine constructors. Instead of spelling out in code the mapping of HAS_<engine> to constructors, makes more use of the recently added data driven approach by putting engine constructor vfuncs into the table as well.

Effect is fewer lines of source and smaller binary.

At the same time simplify the error handling since engine destructors can run on unitialized engines anyway.

Similar approach could be done for legacy submission is wanted.

Quoted 8 lines

v2: Removed ugly BUILD_BUG_ONs in favour of newly introduced
ENGINE_MASK and HAS_ENGINE macros.
Also removed the forward declarations by shuffling functions around.

v3: Warn when logical_rings table does not contain enough data
and disable the engines which could not be initialized. (Chris Wilson)

I was happy with the BUILD_BUG suggestion :)

drivers/gpu/drm/i915/intel_lrc.c logical_ring_setup(struct drm_device *dev, enum intel_engine_id id) · line 2217

Quoted 2 lines
drivers/gpu/drm/i915/intel_lrc.c +2 -0
+	for (i = 0;
+		i < I915_NUM_ENGINES && i < ARRAY_SIZE(logical_rings); i++) {

HAS_ENGINE() == false if i >= I915_NUM_ENGINES
-Chris

Signature · 5 lines
Chris Wilson, Intel Open Source Technology Centre
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#10 lore raw
Quoted 21 lines · Chris Wilson
Quoted 20 lines · Tvrtko Ursulin

From: Tvrtko Ursulin <[email protected]>

Effectively removes one layer of indirection between the mask of possible engines and the engine constructors. Instead of spelling out in code the mapping of HAS_<engine> to constructors, makes more use of the recently added data driven approach by putting engine constructor vfuncs into the table as well.

Effect is fewer lines of source and smaller binary.

At the same time simplify the error handling since engine destructors can run on unitialized engines anyway.

Similar approach could be done for legacy submission is wanted.

v2: Removed ugly BUILD_BUG_ONs in favour of newly introduced
ENGINE_MASK and HAS_ENGINE macros.
Also removed the forward declarations by shuffling functions around.

Quoted 5 lines
Quoted 3 lines

v3: Warn when logical_rings table does not contain enough data
and disable the engines which could not be initialized. (Chris Wilson)

I was happy with the BUILD_BUG suggestion :)

I've changed my mind later. :)

Quoted 4 lines

drivers/gpu/drm/i915/intel_lrc.c logical_ring_setup(struct drm_device *dev, enum intel_engine_id id) · line 2217

Quoted 2 lines
drivers/gpu/drm/i915/intel_lrc.c +2 -0
+	for (i = 0;
+		i < I915_NUM_ENGINES && i < ARRAY_SIZE(logical_rings); i++) {

HAS_ENGINE() == false if i >= I915_NUM_ENGINES

Don't follow. :) Why is v3 not good enough?

Regards,

Tvrtko
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#11 lore raw
Quoted 29 lines · Tvrtko Ursulin
Quoted 21 lines · Chris Wilson
Quoted 20 lines · Tvrtko Ursulin

From: Tvrtko Ursulin <[email protected]>

Effectively removes one layer of indirection between the mask of possible engines and the engine constructors. Instead of spelling out in code the mapping of HAS_<engine> to constructors, makes more use of the recently added data driven approach by putting engine constructor vfuncs into the table as well.

Effect is fewer lines of source and smaller binary.

At the same time simplify the error handling since engine destructors can run on unitialized engines anyway.

Similar approach could be done for legacy submission is wanted.

v2: Removed ugly BUILD_BUG_ONs in favour of newly introduced
ENGINE_MASK and HAS_ENGINE macros.
Also removed the forward declarations by shuffling functions around.

Quoted 5 lines
Quoted 3 lines

v3: Warn when logical_rings table does not contain enough data
and disable the engines which could not be initialized. (Chris Wilson)

I was happy with the BUILD_BUG suggestion :)

Quoted 8 lines

I've changed my mind later. :)

Quoted 4 lines

drivers/gpu/drm/i915/intel_lrc.c logical_ring_setup(struct drm_device *dev, enum intel_engine_id id) · line 2217

Quoted 2 lines
drivers/gpu/drm/i915/intel_lrc.c +2 -0
+	for (i = 0;
+		i < I915_NUM_ENGINES && i < ARRAY_SIZE(logical_rings); i++) {

HAS_ENGINE() == false if i >= I915_NUM_ENGINES

Don't follow. :) Why is v3 not good enough?

Both (all three) is overkill.

I feel like HAS_ENGINE() should encompass i < I915_NUM_ENGINES quite succinctly. For belt and braces,

WARN_ON(dev_priv->intel_info.rings_mask & -(1 << I915_NUM_ENGINES)));

for (i = 0; i < ARRAY_SIZE(); i++) {
	if (!HAS_ENGINE(i))
		continue;
	
	if (!logical_rings[i].init)
		continue;
	
	ret = logical_rings[i].init(logical_rings_engine(i));
	if (ret)
		goto err;

	mask |= ENGINE_MASK(i);
}

WARN_ON(mask != dev_priv->intel_info.rings_mask) ...

?

Signature · 5 lines
Chris Wilson, Intel Open Source Technology Centre
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#12 lore raw
Quoted 37 lines · Chris Wilson
Quoted 36 lines · Tvrtko Ursulin
Quoted 21 lines · Chris Wilson
Quoted 20 lines · Tvrtko Ursulin

From: Tvrtko Ursulin <[email protected]>

Effectively removes one layer of indirection between the mask of possible engines and the engine constructors. Instead of spelling out in code the mapping of HAS_<engine> to constructors, makes more use of the recently added data driven approach by putting engine constructor vfuncs into the table as well.

Effect is fewer lines of source and smaller binary.

At the same time simplify the error handling since engine destructors can run on unitialized engines anyway.

Similar approach could be done for legacy submission is wanted.

v2: Removed ugly BUILD_BUG_ONs in favour of newly introduced
ENGINE_MASK and HAS_ENGINE macros.
Also removed the forward declarations by shuffling functions around.

Quoted 5 lines
Quoted 3 lines

v3: Warn when logical_rings table does not contain enough data
and disable the engines which could not be initialized. (Chris Wilson)

I was happy with the BUILD_BUG suggestion :)

I've changed my mind later. :)

Quoted 4 lines

drivers/gpu/drm/i915/intel_lrc.c logical_ring_setup(struct drm_device *dev, enum intel_engine_id id) · line 2217

Quoted 2 lines
drivers/gpu/drm/i915/intel_lrc.c +2 -0
+	for (i = 0;
+		i < I915_NUM_ENGINES && i < ARRAY_SIZE(logical_rings); i++) {

HAS_ENGINE() == false if i >= I915_NUM_ENGINES

Quoted 8 lines
Quoted 1 line

Don't follow. :) Why is v3 not good enough?

Both (all three) is overkill.

I feel like HAS_ENGINE() should encompass i < I915_NUM_ENGINES quite succinctly. For belt and braces,

WARN_ON(dev_priv->intel_info.rings_mask & -(1 << I915_NUM_ENGINES)));

I don't think this works - you meant testing that bits higher than BIT(I915_NUM_ENGINES) were not set in ring_mask?

And it probably belongs somewhere else, in common code which initializes intel_device_info I think.

Quoted 14 lines
for (i = 0; i < ARRAY_SIZE(); i++) {
	if (!HAS_ENGINE(i))
		continue;
	
	if (!logical_rings[i].init)
		continue;
	
	ret = logical_rings[i].init(logical_rings_engine(i));
	if (ret)
		goto err;

	mask |= ENGINE_MASK(i);
}
Quoted 3 lines

WARN_ON(mask != dev_priv->intel_info.rings_mask) ...

?

I like it, will resend when we clarify the above. Also solves one more issue than the previous versions which is a potentially sparse logical_rings array if engine ids get renumbered.

Tvrtko

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#13 lore raw
Quoted 43 lines · Tvrtko Ursulin
Quoted 41 lines · Chris Wilson
Quoted 29 lines · Tvrtko Ursulin
Quoted 21 lines · Chris Wilson
Quoted 20 lines · Tvrtko Ursulin

From: Tvrtko Ursulin <[email protected]>

Effectively removes one layer of indirection between the mask of possible engines and the engine constructors. Instead of spelling out in code the mapping of HAS_<engine> to constructors, makes more use of the recently added data driven approach by putting engine constructor vfuncs into the table as well.

Effect is fewer lines of source and smaller binary.

At the same time simplify the error handling since engine destructors can run on unitialized engines anyway.

Similar approach could be done for legacy submission is wanted.

v2: Removed ugly BUILD_BUG_ONs in favour of newly introduced
ENGINE_MASK and HAS_ENGINE macros.
Also removed the forward declarations by shuffling functions around.

Quoted 5 lines
Quoted 3 lines

v3: Warn when logical_rings table does not contain enough data
and disable the engines which could not be initialized. (Chris Wilson)

I was happy with the BUILD_BUG suggestion :)

Quoted 8 lines

I've changed my mind later. :)

Quoted 4 lines

drivers/gpu/drm/i915/intel_lrc.c logical_ring_setup(struct drm_device *dev, enum intel_engine_id id) · line 2217

Quoted 2 lines
drivers/gpu/drm/i915/intel_lrc.c +2 -0
+	for (i = 0;
+		i < I915_NUM_ENGINES && i < ARRAY_SIZE(logical_rings); i++) {

HAS_ENGINE() == false if i >= I915_NUM_ENGINES

Don't follow. :) Why is v3 not good enough?

Both (all three) is overkill.

Quoted 7 lines
Quoted 4 lines

I feel like HAS_ENGINE() should encompass i < I915_NUM_ENGINES quite succinctly. For belt and braces,

WARN_ON(dev_priv->intel_info.rings_mask & -(1 << I915_NUM_ENGINES)));

I don't think this works - you meant testing that bits higher than BIT(I915_NUM_ENGINES) were not set in ring_mask?

Yes. Higher than BIT(NUM_ENGINES-1), just to make sure we don't end up setting garbage at some point.

Quoted 2 lines

And it probably belongs somewhere else, in common code which initializes intel_device_info I think.

Possibly. I think the engine initialisation path is a good choice though, since that has the knowlege of what will be setup.

Either here (with the goal of using this as the basis for future unification), or in the caller.
-Chris

Signature · 5 lines
Chris Wilson, Intel Open Source Technology Centre
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#14 lore raw

PATCH v4 1/1 drm/i915: Small compaction of the engine init code

From: Tvrtko Ursulin <[email protected]>

Effectively removes one layer of indirection between the mask of possible engines and the engine constructors. Instead of spelling out in code the mapping of HAS_<engine> to constructors, makes more use of the recently added data driven approach by putting engine constructor vfuncs into the table as well.

Effect is fewer lines of source and smaller binary.

At the same time simplify the error handling since engine destructors can run on unitialized engines anyway.

Similar approach could be done for legacy submission is wanted.

v2: Removed ugly BUILD_BUG_ONs in favour of newly introduced
ENGINE_MASK and HAS_ENGINE macros.
Also removed the forward declarations by shuffling functions around.

v3: Warn when logical_rings table does not contain enough data
and disable the engines which could not be initialized. (Chris Wilson)

v4: Chris Wilson suggested a nicer engine init loop.

---
 drivers/gpu/drm/i915/i915_drv.h  |  27 +++--
 drivers/gpu/drm/i915/intel_lrc.c | 253 ++++++++++++++++++---------------------
 2 files changed, 130 insertions(+), 150 deletions(-)
drivers/gpu/drm/i915/i915_drv.h +16 -11
index 74d0a61de75a..6d96b14b53c8 100644
@@ -2759,17 +2759,22 @@ struct drm_i915_cmd_table {
 #define IS_GEN8(dev)	(INTEL_INFO(dev)->gen_mask & BIT(7))
 #define IS_GEN9(dev)	(INTEL_INFO(dev)->gen_mask & BIT(8))
 
-#define RENDER_RING		(1<<RCS)
-#define BSD_RING		(1<<VCS)
-#define BLT_RING		(1<<BCS)
-#define VEBOX_RING		(1<<VECS)
-#define BSD2_RING		(1<<VCS2)
-#define ALL_ENGINES		(~0)
-
-#define HAS_BSD(dev)		(INTEL_INFO(dev)->ring_mask & BSD_RING)
-#define HAS_BSD2(dev)		(INTEL_INFO(dev)->ring_mask & BSD2_RING)
-#define HAS_BLT(dev)		(INTEL_INFO(dev)->ring_mask & BLT_RING)
-#define HAS_VEBOX(dev)		(INTEL_INFO(dev)->ring_mask & VEBOX_RING)
+#define ENGINE_MASK(id)	BIT(id)
+#define RENDER_RING	ENGINE_MASK(RCS)
+#define BSD_RING	ENGINE_MASK(VCS)
+#define BLT_RING	ENGINE_MASK(BCS)
+#define VEBOX_RING	ENGINE_MASK(VECS)
+#define BSD2_RING	ENGINE_MASK(VCS2)
+#define ALL_ENGINES	(~0)
+
+#define HAS_ENGINE(dev_priv, id) \
+	(INTEL_INFO(dev_priv)->ring_mask & ENGINE_MASK(id))
+
+#define HAS_BSD(dev_priv)	HAS_ENGINE(dev_priv, VCS)
+#define HAS_BSD2(dev_priv)	HAS_ENGINE(dev_priv, VCS2)
+#define HAS_BLT(dev_priv)	HAS_ENGINE(dev_priv, BCS)
+#define HAS_VEBOX(dev_priv)	HAS_ENGINE(dev_priv, VECS)
+
 #define HAS_LLC(dev)		(INTEL_INFO(dev)->has_llc)
 #define HAS_SNOOP(dev)		(INTEL_INFO(dev)->has_snoop)
 #define HAS_EDRAM(dev)		(__I915__(dev)->edram_cap & EDRAM_ENABLED)
drivers/gpu/drm/i915/intel_lrc.c +114 -139

333 lines not on this page · raw message

Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v4 1/1
#15 lore raw
Quoted 20 lines · Tvrtko Ursulin

From: Tvrtko Ursulin <[email protected]>

Effectively removes one layer of indirection between the mask of possible engines and the engine constructors. Instead of spelling out in code the mapping of HAS_<engine> to constructors, makes more use of the recently added data driven approach by putting engine constructor vfuncs into the table as well.

Effect is fewer lines of source and smaller binary.

At the same time simplify the error handling since engine destructors can run on unitialized engines anyway.

Similar approach could be done for legacy submission is wanted.

v2: Removed ugly BUILD_BUG_ONs in favour of newly introduced
ENGINE_MASK and HAS_ENGINE macros.
Also removed the forward declarations by shuffling functions around.

Quoted 8 lines

v3: Warn when logical_rings table does not contain enough data
and disable the engines which could not be initialized. (Chris Wilson)

v4: Chris Wilson suggested a nicer engine init loop.

drivers/gpu/drm/i915/intel_lrc.c logical_ring_setup(struct drm_device *dev, enum intel_engine_id id) · line 2216

Quoted 2 lines
drivers/gpu/drm/i915/intel_lrc.c +2 -0
+	WARN_ON(INTEL_INFO(dev_priv)->ring_mask &
+		GENMASK(sizeof(mask) * BITS_PER_BYTE - 1, I915_NUM_ENGINES));

It's computed as a long, so BITS_PER_LONG would suffice

p/x GENMASK(sizeof(mask) * BITS_PER_BYTE - 1, I915_NUM_ENGINES))

    = ((~0UL) << I915_NUM_ENGINES)
    = 0xffffffc0

p/x -(1 << I915_NUM_ENGINES)

    = 0xffffffc0
Signature · 5 lines
Chris Wilson, Intel Open Source Technology Centre
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#16 lore raw

✓ Ro.CI.BAT: success for drm/i915: Small compaction of the engine init code

In reply to Tvrtko Ursulin
== Series Details ==

== Series Details ==

Series: drm/i915: Small compaction of the engine init code
URL : https://patchwork.freedesktop.org/series/9053/
State : success

== Summary ==

Series 9053v1 drm/i915: Small compaction of the engine init code
http://patchwork.freedesktop.org/api/1.0/series/9053/revisions/1/mbox

Test gem_exec_flush:

        Subgroup basic-batch-kernel-default-cmd:
                fail       -> PASS       (ro-byt-n2820)
Test kms_flip:
        Subgroup basic-plain-flip:
                dmesg-warn -> PASS       (ro-snb-i7-2620M)
Test kms_pipe_crc_basic:
        Subgroup suspend-read-crc-pipe-b:
                dmesg-warn -> SKIP       (ro-bdw-i5-5250u)
fi-skl-i7-6700k  total:226  pass:188  dwarn:0   dfail:0   fail:1   skip:37 
ro-bdw-i5-5250u  total:226  pass:197  dwarn:1   dfail:0   fail:1   skip:27 
ro-bdw-i7-5557U  total:226  pass:198  dwarn:0   dfail:0   fail:1   skip:27 
ro-bdw-i7-5600u  total:226  pass:185  dwarn:0   dfail:0   fail:1   skip:40 
ro-bsw-n3050     total:226  pass:172  dwarn:0   dfail:0   fail:3   skip:51 
ro-byt-n2820     total:226  pass:174  dwarn:0   dfail:0   fail:3   skip:49 
ro-hsw-i3-4010u  total:226  pass:190  dwarn:0   dfail:0   fail:1   skip:35 
ro-hsw-i7-4770r  total:226  pass:190  dwarn:0   dfail:0   fail:1   skip:35 
ro-ilk-i7-620lm  total:226  pass:150  dwarn:0   dfail:0   fail:2   skip:74 
ro-ilk1-i5-650   total:221  pass:150  dwarn:0   dfail:0   fail:2   skip:69 
ro-ivb-i7-3770   total:226  pass:181  dwarn:0   dfail:0   fail:1   skip:44 
ro-ivb2-i7-3770  total:226  pass:185  dwarn:0   dfail:0   fail:1   skip:40 
ro-skl3-i5-6260u total:226  pass:201  dwarn:1   dfail:0   fail:1   skip:23 
ro-snb-i7-2620M  total:226  pass:174  dwarn:0   dfail:0   fail:2   skip:50 

fi-hsw-i7-4770k failed to connect after reboot
fi-kbl-qkkr failed to connect after reboot
fi-skl-i5-6260u failed to connect after reboot
fi-snb-i7-2600 failed to connect after reboot

Results at /archive/results/CI_IGT_test/RO_Patchwork_1271/

0a88ca3 drm-intel-nightly: 2016y-06m-22d-13h-19m-30s UTC integration manifest 2897a9e drm/i915: Small compaction of the engine init code

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#17 lore raw

✗ Ro.CI.BAT: warning for drm/i915: Small compaction of the engine init code (rev2)

In reply to Tvrtko Ursulin
== Series Details ==

== Series Details ==

Series: drm/i915: Small compaction of the engine init code (rev2)
URL : https://patchwork.freedesktop.org/series/9053/
State : warning

== Summary ==

Series 9053v2 drm/i915: Small compaction of the engine init code
http://patchwork.freedesktop.org/api/1.0/series/9053/revisions/2/mbox

Test drv_module_reload_basic:

                pass       -> DMESG-WARN (ro-byt-n2820)
                skip       -> PASS       (ro-hsw-i3-4010u)
                pass       -> SKIP       (fi-skl-i5-6260u)
Test gem_exec_flush:
        Subgroup basic-batch-kernel-default-cmd:
                fail       -> PASS       (ro-byt-n2820)
Test kms_pipe_crc_basic:
        Subgroup nonblocking-crc-pipe-b:
                skip       -> PASS       (fi-skl-i5-6260u)
        Subgroup nonblocking-crc-pipe-c:
                pass       -> SKIP       (fi-skl-i5-6260u)
        Subgroup suspend-read-crc-pipe-b:
                skip       -> PASS       (ro-bdw-i7-5557U)
        Subgroup suspend-read-crc-pipe-c:
                skip       -> DMESG-WARN (ro-bdw-i5-5250u)
fi-hsw-i7-4770k  total:226  pass:194  dwarn:0   dfail:0   fail:1   skip:31 
fi-kbl-qkkr      total:226  pass:161  dwarn:29  dfail:0   fail:1   skip:35 
fi-skl-i5-6260u  total:226  pass:200  dwarn:0   dfail:0   fail:1   skip:25 
fi-skl-i7-6700k  total:226  pass:188  dwarn:0   dfail:0   fail:1   skip:37 
fi-snb-i7-2600   total:226  pass:174  dwarn:0   dfail:0   fail:1   skip:51 
ro-bdw-i5-5250u  total:226  pass:197  dwarn:2   dfail:0   fail:0   skip:27 
ro-bdw-i7-5557U  total:226  pass:199  dwarn:1   dfail:0   fail:0   skip:26 
ro-bdw-i7-5600u  total:226  pass:185  dwarn:0   dfail:0   fail:0   skip:41 
ro-bsw-n3050     total:226  pass:171  dwarn:1   dfail:0   fail:2   skip:52 
ro-byt-n2820     total:226  pass:173  dwarn:1   dfail:0   fail:2   skip:50 
ro-hsw-i3-4010u  total:226  pass:190  dwarn:0   dfail:0   fail:0   skip:36 
ro-hsw-i7-4770r  total:226  pass:190  dwarn:0   dfail:0   fail:0   skip:36 
ro-ilk-i7-620lm  total:226  pass:150  dwarn:0   dfail:0   fail:1   skip:75 
ro-ilk1-i5-650   total:221  pass:150  dwarn:0   dfail:0   fail:1   skip:70 
ro-ivb-i7-3770   total:226  pass:181  dwarn:0   dfail:0   fail:0   skip:45 
ro-ivb2-i7-3770  total:226  pass:185  dwarn:0   dfail:0   fail:0   skip:41 
ro-skl3-i5-6260u total:226  pass:201  dwarn:1   dfail:0   fail:0   skip:24 
ro-snb-i7-2620M  total:226  pass:174  dwarn:0   dfail:0   fail:1   skip:51 

Results at /archive/results/CI_IGT_test/RO_Patchwork_1272/

fb6ffad drm-intel-nightly: 2016y-06m-22d-16h-19m-09s UTC integration manifest 6ddf8f2 drm/i915: Small compaction of the engine init code

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#18 lore raw

✗ Ro.CI.BAT: failure for drm/i915: Small compaction of the engine init code (rev3)

In reply to Tvrtko Ursulin
== Series Details ==

== Series Details ==

Series: drm/i915: Small compaction of the engine init code (rev3)
URL : https://patchwork.freedesktop.org/series/9053/
State : failure

== Summary ==

Series 9053v3 drm/i915: Small compaction of the engine init code
http://patchwork.freedesktop.org/api/1.0/series/9053/revisions/3/mbox

Test gem_exec_flush:

        Subgroup basic-batch-kernel-default-cmd:
                fail       -> PASS       (ro-byt-n2820)
Test kms_flip:
        Subgroup basic-flip-vs-wf_vblank:
                pass       -> FAIL       (ro-bdw-i5-5250u)
Test kms_pipe_crc_basic:
        Subgroup suspend-read-crc-pipe-a:
                skip       -> DMESG-WARN (ro-bdw-i5-5250u)
        Subgroup suspend-read-crc-pipe-b:
                dmesg-warn -> SKIP       (ro-bdw-i7-5557U)
        Subgroup suspend-read-crc-pipe-c:
                skip       -> PASS       (ro-bdw-i7-5557U)
                skip       -> DMESG-WARN (ro-bdw-i5-5250u)
Test vgem_basic:
        Subgroup create:
                skip       -> PASS       (ro-bdw-i7-5557U)
                skip       -> PASS       (ro-ilk1-i5-650)
                skip       -> PASS       (ro-hsw-i3-4010u)
                skip       -> PASS       (ro-bdw-i7-5600u)
                skip       -> PASS       (ro-bdw-i5-5250u)
                skip       -> PASS       (ro-hsw-i7-4770r)
                skip       -> PASS       (ro-ivb-i7-3770)
                skip       -> PASS       (ro-ivb2-i7-3770)
                skip       -> PASS       (ro-byt-n2820)
                skip       -> PASS       (ro-skl3-i5-6260u)
        Subgroup debugfs:
                skip       -> PASS       (ro-bdw-i7-5557U)
                skip       -> PASS       (ro-ilk1-i5-650)
                skip       -> PASS       (ro-hsw-i3-4010u)
                skip       -> PASS       (ro-bdw-i7-5600u)
                skip       -> PASS       (ro-bdw-i5-5250u)
                skip       -> PASS       (ro-hsw-i7-4770r)
                skip       -> PASS       (ro-ivb-i7-3770)
                skip       -> PASS       (ro-ivb2-i7-3770)
                skip       -> PASS       (ro-byt-n2820)
                skip       -> PASS       (ro-skl3-i5-6260u)
        Subgroup mmap:
                skip       -> DMESG-FAIL (ro-bdw-i7-5557U)
                skip       -> DMESG-FAIL (ro-ilk1-i5-650)
                skip       -> DMESG-FAIL (ro-hsw-i3-4010u)
                skip       -> DMESG-FAIL (ro-bdw-i7-5600u)
                skip       -> DMESG-FAIL (ro-bdw-i5-5250u)
                skip       -> DMESG-FAIL (ro-hsw-i7-4770r)
                skip       -> DMESG-FAIL (ro-ivb-i7-3770)
                skip       -> DMESG-FAIL (ro-ivb2-i7-3770)
                skip       -> DMESG-FAIL (ro-byt-n2820)
                skip       -> DMESG-FAIL (ro-skl3-i5-6260u)
        Subgroup sysfs:
                skip       -> PASS       (ro-bdw-i7-5557U)
                skip       -> PASS       (ro-ilk1-i5-650)
                skip       -> PASS       (ro-hsw-i3-4010u)
                skip       -> PASS       (ro-bdw-i7-5600u)
                skip       -> PASS       (ro-bdw-i5-5250u)
                skip       -> PASS       (ro-hsw-i7-4770r)
                skip       -> PASS       (ro-ivb-i7-3770)
                skip       -> PASS       (ro-ivb2-i7-3770)
                skip       -> PASS       (ro-byt-n2820)
                skip       -> PASS       (ro-skl3-i5-6260u)
Test vgem_reload_basic:
                skip       -> PASS       (ro-bdw-i7-5557U)
                skip       -> PASS       (ro-ilk1-i5-650)
                skip       -> PASS       (ro-hsw-i3-4010u)
                skip       -> PASS       (ro-bdw-i7-5600u)
                skip       -> PASS       (ro-bdw-i5-5250u)
                skip       -> PASS       (ro-hsw-i7-4770r)
                skip       -> PASS       (ro-ivb-i7-3770)
                skip       -> PASS       (ro-ivb2-i7-3770)
                skip       -> PASS       (ro-byt-n2820)
                skip       -> PASS       (ro-skl3-i5-6260u)
fi-hsw-i7-4770k  total:227  pass:194  dwarn:0   dfail:0   fail:1   skip:32 
fi-kbl-qkkr      total:227  pass:161  dwarn:28  dfail:0   fail:0   skip:38 
fi-skl-i5-6260u  total:227  pass:202  dwarn:0   dfail:0   fail:1   skip:24 
fi-skl-i7-6700k  total:227  pass:188  dwarn:0   dfail:0   fail:1   skip:38 
ro-bdw-i5-5250u  total:227  pass:200  dwarn:4   dfail:1   fail:2   skip:20 
ro-bdw-i7-5557U  total:227  pass:203  dwarn:0   dfail:1   fail:1   skip:22 
ro-bdw-i7-5600u  total:227  pass:189  dwarn:0   dfail:1   fail:0   skip:37 
ro-bsw-n3050     total:227  pass:176  dwarn:0   dfail:1   fail:2   skip:48 
ro-byt-n2820     total:227  pass:178  dwarn:0   dfail:1   fail:3   skip:45 
ro-hsw-i3-4010u  total:227  pass:194  dwarn:0   dfail:1   fail:1   skip:31 
ro-hsw-i7-4770r  total:227  pass:194  dwarn:0   dfail:1   fail:1   skip:31 
ro-ilk1-i5-650   total:222  pass:154  dwarn:0   dfail:1   fail:2   skip:65 
ro-ivb-i7-3770   total:227  pass:185  dwarn:0   dfail:1   fail:1   skip:40 
ro-ivb2-i7-3770  total:227  pass:189  dwarn:0   dfail:1   fail:1   skip:36 
ro-skl3-i5-6260u total:227  pass:205  dwarn:1   dfail:1   fail:1   skip:19 

Results at /archive/results/CI_IGT_test/RO_Patchwork_1284/

8e5ac92 drm-intel-nightly: 2016y-06m-22d-18h-10m-30s UTC integration manifest 2c52a2d drm/i915: Small compaction of the engine init code

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#19 lore raw

✗ Ro.CI.BAT: failure for drm/i915: Small compaction of the engine init code (rev4)

In reply to Tvrtko Ursulin
== Series Details ==

== Series Details ==

Series: drm/i915: Small compaction of the engine init code (rev4)
URL : https://patchwork.freedesktop.org/series/9053/
State : failure

== Summary ==

Series 9053v4 drm/i915: Small compaction of the engine init code
http://patchwork.freedesktop.org/api/1.0/series/9053/revisions/4/mbox

Test gem_exec_suspend:

        Subgroup basic-s3:
                pass       -> INCOMPLETE (fi-hsw-i7-4770k)
Test kms_pipe_crc_basic:
        Subgroup suspend-read-crc-pipe-a:
                skip       -> DMESG-WARN (ro-bdw-i5-5250u)
        Subgroup suspend-read-crc-pipe-b:
                dmesg-warn -> SKIP       (ro-bdw-i5-5250u)
        Subgroup suspend-read-crc-pipe-c:
                skip       -> DMESG-WARN (ro-bdw-i5-5250u)
Test vgem_basic:
        Subgroup create:
                skip       -> PASS       (ro-ilk1-i5-650)
                skip       -> PASS       (ro-hsw-i3-4010u)
                skip       -> PASS       (ro-bdw-i7-5600u)
                skip       -> PASS       (ro-bdw-i5-5250u)
                skip       -> PASS       (ro-hsw-i7-4770r)
                skip       -> PASS       (ro-ivb-i7-3770)
                skip       -> PASS       (ro-ivb2-i7-3770)
                skip       -> PASS       (ro-byt-n2820)
                skip       -> PASS       (ro-skl3-i5-6260u)
        Subgroup debugfs:
                skip       -> PASS       (ro-ilk1-i5-650)
                skip       -> PASS       (ro-hsw-i3-4010u)
                skip       -> PASS       (ro-bdw-i7-5600u)
                skip       -> PASS       (ro-bdw-i5-5250u)
                skip       -> PASS       (ro-hsw-i7-4770r)
                skip       -> PASS       (ro-ivb-i7-3770)
                skip       -> PASS       (ro-ivb2-i7-3770)
                skip       -> PASS       (ro-byt-n2820)
                skip       -> PASS       (ro-skl3-i5-6260u)
        Subgroup mmap:
                skip       -> DMESG-FAIL (ro-ilk1-i5-650)
                skip       -> DMESG-FAIL (ro-hsw-i3-4010u)
                skip       -> DMESG-FAIL (ro-bdw-i7-5600u)
                skip       -> DMESG-FAIL (ro-bdw-i5-5250u)
                skip       -> DMESG-FAIL (ro-hsw-i7-4770r)
                skip       -> DMESG-FAIL (ro-ivb-i7-3770)
                skip       -> DMESG-FAIL (ro-ivb2-i7-3770)
                skip       -> DMESG-FAIL (ro-byt-n2820)
                skip       -> DMESG-FAIL (ro-skl3-i5-6260u)
        Subgroup sysfs:
                skip       -> PASS       (ro-ilk1-i5-650)
                skip       -> PASS       (ro-hsw-i3-4010u)
                skip       -> PASS       (ro-bdw-i7-5600u)
                skip       -> PASS       (ro-bdw-i5-5250u)
                skip       -> PASS       (ro-hsw-i7-4770r)
                skip       -> PASS       (ro-ivb-i7-3770)
                skip       -> PASS       (ro-ivb2-i7-3770)
                skip       -> PASS       (ro-byt-n2820)
                skip       -> PASS       (ro-skl3-i5-6260u)
Test vgem_reload_basic:
                skip       -> PASS       (ro-ilk1-i5-650)
                skip       -> PASS       (ro-hsw-i3-4010u)
                skip       -> PASS       (ro-bdw-i7-5600u)
                skip       -> PASS       (ro-bdw-i5-5250u)
                skip       -> PASS       (ro-hsw-i7-4770r)
                skip       -> PASS       (ro-ivb-i7-3770)
                skip       -> PASS       (ro-ivb2-i7-3770)
                skip       -> PASS       (ro-byt-n2820)
                skip       -> PASS       (ro-skl3-i5-6260u)
fi-hsw-i7-4770k  total:103  pass:86   dwarn:0   dfail:0   fail:0   skip:16 
fi-kbl-qkkr      total:227  pass:160  dwarn:29  dfail:0   fail:0   skip:38 
fi-skl-i5-6260u  total:227  pass:202  dwarn:0   dfail:0   fail:1   skip:24 
fi-skl-i7-6700k  total:227  pass:188  dwarn:0   dfail:0   fail:1   skip:38 
fi-snb-i7-2600   total:227  pass:174  dwarn:0   dfail:0   fail:1   skip:52 
ro-bdw-i5-5250u  total:227  pass:201  dwarn:3   dfail:1   fail:1   skip:21 
ro-bdw-i7-5600u  total:227  pass:189  dwarn:0   dfail:1   fail:0   skip:37 
ro-bsw-n3050     total:227  pass:176  dwarn:0   dfail:1   fail:2   skip:48 
ro-byt-n2820     total:227  pass:177  dwarn:0   dfail:1   fail:4   skip:45 
ro-hsw-i3-4010u  total:227  pass:194  dwarn:0   dfail:1   fail:1   skip:31 
ro-hsw-i7-4770r  total:227  pass:194  dwarn:0   dfail:1   fail:1   skip:31 
ro-ilk1-i5-650   total:222  pass:154  dwarn:0   dfail:1   fail:2   skip:65 
ro-ivb-i7-3770   total:227  pass:185  dwarn:0   dfail:1   fail:1   skip:40 
ro-ivb2-i7-3770  total:227  pass:189  dwarn:0   dfail:1   fail:1   skip:36 
ro-skl3-i5-6260u total:227  pass:205  dwarn:1   dfail:1   fail:1   skip:19 

ro-bdw-i7-5557U failed to connect after reboot

Results at /archive/results/CI_IGT_test/RO_Patchwork_1288/

8e5ac92 drm-intel-nightly: 2016y-06m-22d-18h-10m-30s UTC integration manifest 7b807e8 drm/i915: Small compaction of the engine init code

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author Applied
#20 lore raw

Re: ✗ Ro.CI.BAT: failure for drm/i915: Small compaction of the engine init code (rev4)

Quoted 6 lines · Patchwork

== Series Details ==

Series: drm/i915: Small compaction of the engine init code (rev4)
URL : https://patchwork.freedesktop.org/series/9053/
State : failure

Quoted 8 lines

== Summary ==

Series 9053v4 drm/i915: Small compaction of the engine init code
http://patchwork.freedesktop.org/api/1.0/series/9053/revisions/4/mbox

Test gem_exec_suspend:

         Subgroup basic-s3:
                 pass       -> INCOMPLETE (fi-hsw-i7-4770k)

Patch doesn't touch HSW code paths and it happened before sporadically.

Quoted 7 lines

Test kms_pipe_crc_basic:

         Subgroup suspend-read-crc-pipe-a:
                 skip       -> DMESG-WARN (ro-bdw-i5-5250u)
         Subgroup suspend-read-crc-pipe-b:
                 dmesg-warn -> SKIP       (ro-bdw-i5-5250u)
         Subgroup suspend-read-crc-pipe-c:
                 skip       -> DMESG-WARN (ro-bdw-i5-5250u)

Unrelated https://bugs.freedesktop.org/show_bug.cgi?id=96614

Quoted 43 lines

Test vgem_basic:

         Subgroup create:
                 skip       -> PASS       (ro-ilk1-i5-650)
                 skip       -> PASS       (ro-hsw-i3-4010u)
                 skip       -> PASS       (ro-bdw-i7-5600u)
                 skip       -> PASS       (ro-bdw-i5-5250u)
                 skip       -> PASS       (ro-hsw-i7-4770r)
                 skip       -> PASS       (ro-ivb-i7-3770)
                 skip       -> PASS       (ro-ivb2-i7-3770)
                 skip       -> PASS       (ro-byt-n2820)
                 skip       -> PASS       (ro-skl3-i5-6260u)
         Subgroup debugfs:
                 skip       -> PASS       (ro-ilk1-i5-650)
                 skip       -> PASS       (ro-hsw-i3-4010u)
                 skip       -> PASS       (ro-bdw-i7-5600u)
                 skip       -> PASS       (ro-bdw-i5-5250u)
                 skip       -> PASS       (ro-hsw-i7-4770r)
                 skip       -> PASS       (ro-ivb-i7-3770)
                 skip       -> PASS       (ro-ivb2-i7-3770)
                 skip       -> PASS       (ro-byt-n2820)
                 skip       -> PASS       (ro-skl3-i5-6260u)
         Subgroup mmap:
                 skip       -> DMESG-FAIL (ro-ilk1-i5-650)
                 skip       -> DMESG-FAIL (ro-hsw-i3-4010u)
                 skip       -> DMESG-FAIL (ro-bdw-i7-5600u)
                 skip       -> DMESG-FAIL (ro-bdw-i5-5250u)
                 skip       -> DMESG-FAIL (ro-hsw-i7-4770r)
                 skip       -> DMESG-FAIL (ro-ivb-i7-3770)
                 skip       -> DMESG-FAIL (ro-ivb2-i7-3770)
                 skip       -> DMESG-FAIL (ro-byt-n2820)
                 skip       -> DMESG-FAIL (ro-skl3-i5-6260u)
         Subgroup sysfs:
                 skip       -> PASS       (ro-ilk1-i5-650)
                 skip       -> PASS       (ro-hsw-i3-4010u)
                 skip       -> PASS       (ro-bdw-i7-5600u)
                 skip       -> PASS       (ro-bdw-i5-5250u)
                 skip       -> PASS       (ro-hsw-i7-4770r)
                 skip       -> PASS       (ro-ivb-i7-3770)
                 skip       -> PASS       (ro-ivb2-i7-3770)
                 skip       -> PASS       (ro-byt-n2820)
                 skip       -> PASS       (ro-skl3-i5-6260u)
Test vgem_reload_basic:
                 skip       -> PASS       (ro-ilk1-i5-650)
Quoted 8 lines
                 skip       -> PASS       (ro-hsw-i3-4010u)
                 skip       -> PASS       (ro-bdw-i7-5600u)
                 skip       -> PASS       (ro-bdw-i5-5250u)
                 skip       -> PASS       (ro-hsw-i7-4770r)
                 skip       -> PASS       (ro-ivb-i7-3770)
                 skip       -> PASS       (ro-ivb2-i7-3770)
                 skip       -> PASS       (ro-byt-n2820)
                 skip       -> PASS       (ro-skl3-i5-6260u)

Unrelated https://bugs.freedesktop.org/show_bug.cgi?id=96603

Quoted 15 lines
fi-hsw-i7-4770k  total:103  pass:86   dwarn:0   dfail:0   fail:0   skip:16
fi-kbl-qkkr      total:227  pass:160  dwarn:29  dfail:0   fail:0   skip:38
fi-skl-i5-6260u  total:227  pass:202  dwarn:0   dfail:0   fail:1   skip:24
fi-skl-i7-6700k  total:227  pass:188  dwarn:0   dfail:0   fail:1   skip:38
fi-snb-i7-2600   total:227  pass:174  dwarn:0   dfail:0   fail:1   skip:52
ro-bdw-i5-5250u  total:227  pass:201  dwarn:3   dfail:1   fail:1   skip:21
ro-bdw-i7-5600u  total:227  pass:189  dwarn:0   dfail:1   fail:0   skip:37
ro-bsw-n3050     total:227  pass:176  dwarn:0   dfail:1   fail:2   skip:48
ro-byt-n2820     total:227  pass:177  dwarn:0   dfail:1   fail:4   skip:45
ro-hsw-i3-4010u  total:227  pass:194  dwarn:0   dfail:1   fail:1   skip:31
ro-hsw-i7-4770r  total:227  pass:194  dwarn:0   dfail:1   fail:1   skip:31
ro-ilk1-i5-650   total:222  pass:154  dwarn:0   dfail:1   fail:2   skip:65
ro-ivb-i7-3770   total:227  pass:185  dwarn:0   dfail:1   fail:1   skip:40
ro-ivb2-i7-3770  total:227  pass:189  dwarn:0   dfail:1   fail:1   skip:36
ro-skl3-i5-6260u total:227  pass:205  dwarn:1   dfail:1   fail:1   skip:19
Quoted 6 lines

ro-bdw-i7-5557U failed to connect after reboot

Results at /archive/results/CI_IGT_test/RO_Patchwork_1288/

8e5ac92 drm-intel-nightly: 2016y-06m-22d-18h-10m-30s UTC integration manifest 7b807e8 drm/i915: Small compaction of the engine init code

Merged to dinq, thanks for the review.

Regards,

Tvrtko

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx