mcb: Added support for LPC or non PCI based MCB carrier

PATCH Applied Andreas Werner 2 participants 2 messages Jun 24, 2016 – Jul 5, 2016 Men chameleon bus (mcb)

lore

Share & tools

lore

Andreas Werner

author

2016-06-24 13:55 UTC #0 lore raw

PATCH 1/1 mcb: Added support for LPC or non PCI based MCB carrier

Add support for MCB bases FPGAs connected to the LPC or non PCI Bus.

This driver currently supports the SC24 board. The FPGA is connected to the LPC bus and is identified using the BIOS DMI string.

Signed-off-by Andreas Werner <[email protected]>

---
 drivers/mcb/Kconfig   |   9 +++
 drivers/mcb/Makefile  |   1 +
 drivers/mcb/mcb-lpc.c | 158 ++++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 168 insertions(+)
 create mode 100644 drivers/mcb/mcb-lpc.c

drivers/mcb/Kconfig +9 -0

index e9a6976..76d9c51 100644
@@ -28,4 +28,13 @@ config MCB_PCI
 
 	   If build as a module, the module is called mcb-pci.ko
 
+config MCB_LPC
+	   tristate "LPC (non PCI) based MCB carrier"
+	   default n
+	   help
+
+	   This is a MCB carrier on a LPC or non PCI device.
+
+	   If build as a module, the module is called mcb-lpc.ko
+
 endif # MCB

drivers/mcb/Makefile +1 -0

index 1ae1413..bcc7745 100644
@@ -5,3 +5,4 @@ mcb-y += mcb-core.o
 mcb-y += mcb-parse.o
 
 obj-$(CONFIG_MCB_PCI) += mcb-pci.o
+obj-$(CONFIG_MCB_LPC) += mcb-lpc.o

drivers/mcb/mcb-lpc.c new file +158 -0

158 lines not on this page · raw message

Signature · 1 line

2.6.2

Johannes Thumshirn

maintainer Applied

2016-07-05 11:38 UTC #1 lore raw

Quoted 8 lines · Andreas Werner

Add support for MCB bases FPGAs connected to the LPC or non PCI Bus.
This driver currently supports the SC24 board. The FPGA is connected to the LPC bus and is identified using the BIOS DMI string.
Signed-off-by Andreas Werner <[email protected]>

Applied, thanks.