clk: sunxi: pll2: Fix return value check in sun4i_pll2_setup()
PATCH 1/1 clk: sunxi: pll2: Fix return value check in sun4i_pll2_setup()
From: Wei Yongjun <[email protected]>
In case of error, the functions clk_register_composite() and clk_register_divider() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR().
Signed-off-by Wei Yongjun <[email protected]>
--- drivers/clk/sunxi/clk-a10-pll2.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/clk/sunxi/clk-a10-pll2.c +2 -2
@@ -73,7 +73,7 @@ static void __init sun4i_pll2_setup(struct device_node *node,SUN4I_PLL2_PRE_DIV_WIDTH ,CLK_DIVIDER_ONE_BASED |CLK_DIVIDER_ALLOW_ZERO , &sun4i_a10_pll2_lock); -if (!prediv_clk) { +if (IS_ERR (prediv_clk)) {pr_err ("Couldn't register the prediv clock\n" ); goto err_free_array; }
@@ -106,7 +106,7 @@ static void __init sun4i_pll2_setup(struct device_node *node, &mult->hw, &clk_multiplier_ops, &gate->hw, &clk_gate_ops, CLK_SET_RATE_PARENT); -if (!base_clk) { +if (IS_ERR (base_clk)) {pr_err ("Couldn't register the base multiplier clock\n" ); goto err_free_multiplier; }
Maxime Ripard
AppliedPATCH 1/1 clk: sunxi: pll2: Fix return value check in sun4i_pll2_setup()
Quoted 8 lines · On Wed, Jul 06, 2016 at 12:18:34PM +0000, weiyj_lk at 163.com wrote:
From: Wei Yongjun <[email protected]>
In case of error, the functions
clk_register_composite()andclk_register_divider()returnsERR_PTR()and never returns NULL. The NULL test in the return value check should be replaced withIS_ERR().Signed-off-by Wei Yongjun <[email protected]>
Applied, thanks
Maxime
Signature · 10 lines
Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160709/9d6fff52/attachment.sig>