WIP: usb: xhci-pci: Add DM support
Subsystems (2)
PATCH 1/1 WIP: usb: xhci-pci: Add DM support
This patch adds DM support to the xHCI PCI driver. Enabling its use e.g. in x86 platforms.
Status: On the congatec BayTrail SoM, xHCI still does not work correctly with this patch. Some internal timeouts lead to resets (BUG). Additional work is needed here. I'm posting this version as WIP so that other developers interested in this support might use it as a start. I might get back to it in a few weeks as well.
--- drivers/usb/host/xhci-pci.c | 81 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 81 insertions(+)
drivers/usb/host/xhci-pci.c +81 -0
@@ -7,12 +7,15 @@*/ #include <common.h> +#include <dm.h> #include <errno.h> #include <pci.h> #include <usb.h> #include "xhci.h" +#ifndef CONFIG_DM_USB +/* * Create the appropriate control structures to manage a new XHCI host * controller.
@@ -58,3 +61,81 @@ int xhci_hcd_init(int index, struct xhci_hccr **ret_hccr,void xhci_hcd_stop (int index) { } + +#else + +struct xhci_pci_priv { +struct xhci_ctrl ctrl;/* Needs to come first in this struct! */ +}; + +static void xhci_pci_init (struct udevice *dev,struct xhci_hccr **ret_hccr, +struct xhci_hcor **ret_hcor) +{ +struct xhci_hccr *hccr; +struct xhci_hcor *hcor; +u32 cmd; + + hccr = (struct xhci_hccr *)dm_pci_map_bar (dev, +PCI_BASE_ADDRESS_0 ,PCI_REGION_MEM ); + hcor = (struct xhci_hcor *)((uintptr_t ) hccr + +HC_LENGTH (xhci_readl (&hccr->cr_capbase))); + +debug ("XHCI-PCI init hccr 0x%x and hcor 0x%x hc_length %d\n" , + (u32 )hccr, (u32 )hcor, + (u32 )HC_LENGTH (xhci_readl (&hccr->cr_capbase))); + + *ret_hccr = hccr; + *ret_hcor = hcor; + +/* enable busmaster */ +dm_pci_read_config32 (dev,PCI_COMMAND , &cmd); + cmd |=PCI_COMMAND_MASTER ; +dm_pci_write_config32 (dev,PCI_COMMAND , cmd); +} + +static int xhci_pci_probe (struct udevice *dev) +{ +struct xhci_hccr *hccr; +struct xhci_hcor *hcor; + +xhci_pci_init (dev, &hccr, &hcor); + +return xhci_register (dev, hccr, hcor); +} + +static int xhci_pci_remove (struct udevice *dev) +{ +int ret; + + ret =xhci_deregister (dev); +if (ret) +return ret; + +return 0 ; +} + +static const struct udevice_id xhci_pci_ids[] = { + { .compatible ="xhci-pci" }, + { } +}; + +U_BOOT_DRIVER (xhci_pci) = { + .name ="xhci_pci" , + .id =UCLASS_USB , + .probe = xhci_pci_probe, + .remove = xhci_pci_remove, + .of_match = xhci_pci_ids, + .ops = &xhci_usb_ops, + .platdata_auto_alloc_size =sizeof (struct usb_platdata ), + .priv_auto_alloc_size =sizeof (struct xhci_pci_priv ), + .flags =DM_FLAG_ALLOC_PRIV_DMA , +}; + +static struct pci_device_id xhci_pci_supported[] = { + {PCI_DEVICE_CLASS (PCI_CLASS_SERIAL_USB_XHCI , ~0 ) }, + {}, +}; + +U_BOOT_PCI_DEVICE (xhci_pci, xhci_pci_supported); + +#endif /* CONFIG_DM_USB */
Signature · 1 line
2.9.2
PATCH 1/1 WIP: usb: xhci-pci: Add DM support
Quoted 9 lines · Stefan Roese
This patch adds DM support to the xHCI PCI driver. Enabling its use e.g. in x86 platforms.
Status: On the congatec BayTrail SoM, xHCI still does not work correctly with this patch. Some internal timeouts lead to resets (BUG). Additional work is needed here. I'm posting this version as WIP so that other developers interested in this support might use it as a start. I might get back to it in a few weeks as well.
Quoted 8 lines
Signed-off-by Stefan Roese <[email protected]>Cc George McCollister <[email protected]>Cc Simon Glass <[email protected]>Cc Bin Meng <[email protected]>Cc Marek Vasut <[email protected]>--- drivers/usb/host/xhci-pci.c | 81 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 81 insertions(+)
PATCH 1/1 WIP: usb: xhci-pci: Add DM support
Quoted 19 lines · Simon Glass
Quoted 9 lines · Stefan Roese
This patch adds DM support to the xHCI PCI driver. Enabling its use e.g. in x86 platforms
Status: On the congatec BayTrail SoM, xHCI still does not work correctly with this patch. Some internal timeouts lead to resets (BUG). Additional work is needed here. I'm posting this version as WIP so that other developers interested in this support might use it as a start. I might get back to it in a few weeks as well.
Quoted 8 lines
Signed-off-by Stefan Roese <[email protected]>Cc George McCollister <[email protected]>Cc Simon Glass <[email protected]>Cc Bin Meng <[email protected]>Cc Marek Vasut <[email protected]>--- drivers/usb/host/xhci-pci.c | 81 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 81 insertions(+)
Quoted 1 line
Reviewed-by Simon Glass <[email protected]>
Marek, what do you think about this DM driver support? I'll re-visit xHCI on x86 very shortly - hopefully later this week. Do you have some comments or are you okay with this patch?
Thanks,
Stefan
PATCH 1/1 WIP: usb: xhci-pci: Add DM support
Quoted 21 lines · Stefan Roese
Quoted 20 lines · Simon Glass
Quoted 18 lines · Stefan Roese
This patch adds DM support to the xHCI PCI driver. Enabling its use e.g. in x86 platforms
Status: On the congatec BayTrail SoM, xHCI still does not work correctly with this patch. Some internal timeouts lead to resets (BUG). Additional work is needed here. I'm posting this version as WIP so that other developers interested in this support might use it as a start. I might get back to it in a few weeks as well.
Signed-off-by Stefan Roese <[email protected]>Cc George McCollister <[email protected]>Cc Simon Glass <[email protected]>Cc Bin Meng <[email protected]>Cc Marek Vasut <[email protected]>--- drivers/usb/host/xhci-pci.c | 81 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 81 insertions(+)
Quoted 5 lines
Quoted 1 line
Reviewed-by Simon Glass <[email protected]>Marek, what do you think about this DM driver support? I'll re-visit xHCI on x86 very shortly - hopefully later this week. Do you have some comments or are you okay with this patch?
I'm fine with it, thanks.
Signature · 2 lines
Best regards, Marek Vasut