thermal: add Intel BXT WhiskeyCove PMIC thermal driver
PATCH v3 1/1 thermal: add Intel BXT WhiskeyCove PMIC thermal driver
From: Yegnesh S Iyer <[email protected]>
This change adds support for Intel BXT Whiskey Cove PMIC thermal driver which is intended to handle the alert interrupts triggered upon thermal trip point cross and notify the thermal framework appropriately with the zone, temp, crossed trip and event details.
Signed-off-by Yegnesh S Iyer <[email protected]>
Signed-off-by Bin Gao <[email protected]>
Changes in v3:
- Moved driver data from mfd domain to the driver
- Minor coding style related cleanup
Changes in v2:
- Removed unnecessary request_threaded_irq() - we should be only using devm_request_threaded_irq() with virq
--- drivers/thermal/Kconfig | 10 ++ drivers/thermal/Makefile | 1 + drivers/thermal/intel_pmic_thermal.c | 299 +++++++++++++++++++++++++++++++++++ 3 files changed, 310 insertions(+) create mode 100644 drivers/thermal/intel_pmic_thermal.c
drivers/thermal/Kconfig +10 -0
@@ -332,6 +332,16 @@ menu "ACPI INT340X thermal drivers" source drivers/thermal/int340x_thermal/Kconfig endmenu +config INTEL_PMIC_THERMAL + tristate "Intel PMIC thermal driver" + depends on X86 && INTEL_SOC_PMIC && REGMAP + help + Select this driver for Intel PMIC with ADC channels monitoring system + temperature measurements and alerts. + This driver is used for monitoring the ADC channels of PMIC and handles + the alert trip point interrupts and notifies the thermal framework with + the trip point and temperature details of the zone. + config INTEL_PCH_THERMAL tristate "Intel PCH Thermal Reporting Driver" depends on X86 && PCI
drivers/thermal/Makefile +1 -0
@@ -45,6 +45,7 @@ obj-$(CONFIG_INTEL_SOC_DTS_THERMAL) += intel_soc_dts_thermal.o obj-$(CONFIG_INTEL_QUARK_DTS_THERMAL) += intel_quark_dts_thermal.o obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal/ obj-$(CONFIG_INT340X_THERMAL) += int340x_thermal/ +obj-$(CONFIG_INTEL_PMIC_THERMAL) += intel_pmic_thermal.o obj-$(CONFIG_INTEL_PCH_THERMAL) += intel_pch_thermal.o obj-$(CONFIG_ST_THERMAL) += st/ obj-$(CONFIG_TEGRA_SOCTHERM) += tegra/
drivers/thermal/intel_pmic_thermal.c new file +299 -0
299 lines not on this page · raw message
Signature · 1 line
1.9.1