usb: typec: add PD sink port support for Intel Whiskey Cove PMIC Typc-C PHY driver

index c7c2d28..000d6ae 100644
@@ -3,6 +3,7 @@
  *
  * Copyright (C) 2016 Intel Corporation
  * Author: Heikki Krogerus <[email protected]>
+ * Author: Chandra Sekhar Anagani <[email protected]>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as

@@ -10,9 +11,11 @@
  */
 
 #include <linux/acpi.h>
+#include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/usb/typec.h>
+#include <linux/usb/pd_sink.h>
 #include <linux/platform_device.h>
 #include <linux/mfd/intel_soc_pmic.h>
 

@@ -25,6 +28,7 @@
 #define USBC_CONTROL3		0x7003
 #define USBC_CC1_CTRL		0x7004
 #define USBC_CC2_CTRL		0x7005
+#define USBC_CC_SEL		0x7006
 #define USBC_STATUS1		0x7007
 #define USBC_STATUS2		0x7008
 #define USBC_STATUS3		0x7009

@@ -32,7 +36,16 @@
 #define USBC_IRQ2		0x7016
 #define USBC_IRQMASK1		0x7017
 #define USBC_IRQMASK2		0x7018
-
+#define USBC_PD_CFG1		0x7019
+#define USBC_PD_CFG2		0x701a
+#define USBC_PD_CFG3		0x701b
+#define USBC_PD_STATUS		0x701c
+#define USBC_RX_STATUS		0x701d
+#define USBC_RX_INFO		0x701e
+#define USBC_TX_CMD		0x701f
+#define USBC_TX_INFO		0x7020
+#define USBC_RX_DATA_START	0x7028
+#define USBC_TX_DATA_START	0x7047
 /* Register bits */
 
 #define USBC_CONTROL1_MODE_DRP(r)	((r & ~0x7) | 4)

@@ -44,7 +57,9 @@
 #define USBC_CONTROL3_PD_DIS		BIT(1)
 
 #define USBC_CC_CTRL_VCONN_EN		BIT(1)
+#define USBC_CC_CTRL_TX_EN		BIT(2)
 
+#define USBC_CC_SEL_CCSEL		(BIT(0) | BIT(1))
 #define USBC_STATUS1_DET_ONGOING	BIT(6)
 #define USBC_STATUS1_RSLT(r)		(r & 0xf)
 #define USBC_RSLT_NOTHING		0

@@ -79,11 +94,44 @@
 				 USBC_IRQ2_RX_HR | USBC_IRQ2_RX_CR | \
 				 USBC_IRQ2_TX_SUCCESS | USBC_IRQ2_TX_FAIL)
 
+#define USBC_PD_CFG1_ID_FILL		BIT(7)
+
+#define USBC_PD_CFG2_SOP_RX		BIT(0)
+
+#define USBC_PD_CFG3_SR_SOP2		(BIT(7) | BIT(6))
+#define USBC_PD_CFG3_SR_SOP1		(BIT(5) | BIT(4))
+#define USBC_PD_CFG3_SR_SOP0		(BIT(3) | BIT(2))
+#define USBC_PD_CFG3_DATAROLE		BIT(1)
+#define USBC_PD_CFG3_PWRROLE		BIT(0)
+
+#define USBC_TX_CMD_TXBUF_RDY		BIT(0)
+#define USBC_TX_CMD_TX_START		BIT(1)
+#define USBC_TX_CMD_TXBUF_CMD(r)	((r >> 5) & 0x7)
+
+#define USBC_TX_INFO_TX_SOP		(BIT(0) | BIT(1) | BIT(2))
+#define USBC_TX_INFO_TX_RETRIES		(BIT(3) | BIT(4) | BIT(5))
+
+#define USBC_RX_STATUS_RX_DATA		BIT(7)
+#define USBC_RX_STATUS_RX_OVERRUN	BIT(6)
+#define USBC_RX_STATUS_RX_CLEAR		BIT(0)
+
+#define USBC_PD_STATUS_RX_RSLT(r)	((r >> 3) & 0x7)
+#define USBC_PD_STATUS_TX_RSLT(r)	(r & 0x7)
+
+#define USBC_RX_INFO_RXBYTES(r)		((r >> 3) & 0x1f)
+#define USBC_RX_INFO_RX_SOP(r)		(r & 0x7)
+
+#define USBC_PD_RX_BUF_LEN		30
+#define USBC_PD_TX_BUF_LEN		30
+#define USBC_PD_SEND_HR			(3 << 5)
+
 struct wcove_typec {
+	int pd_port_num;
 	struct mutex lock; /* device lock */
 	struct device *dev;
 	struct regmap *regmap;
 	struct typec_port *port;
+	struct pd_sink_port pd_port;
 	struct typec_capability cap;
 	struct typec_connection con;
 	struct typec_partner partner;

@@ -106,6 +154,50 @@ enum wcove_typec_role {
 	WCOVE_ROLE_DEVICE,
 };
 
+static struct sink_ps profiles[] = {
+
+	{
+		.ps_type = PS_TYPE_FIXED,
+		.ps_fixed = {
+			.voltage_fixed	= 100,	/* 5V/50mV = 100 */
+			.current_default = 90,	/* 900mA/10mA = 90 */
+			.current_max	= 90,	/* 900mA/10mA = 90 */
+		},
+
+	},
+
+	{
+		.ps_type = PS_TYPE_FIXED,
+		.ps_fixed = {
+			.voltage_fixed	= 100,
+			.current_default = 300,
+			.current_max	= 300,
+		},
+	},
+
+	{
+		.ps_type = PS_TYPE_FIXED,
+		.ps_fixed = {
+			.voltage_fixed	= 240,
+			.current_default = 300,
+			.current_max	= 300,
+		},
+	},
+
+};
+
+static struct pd_sink_profile profile = {
+	.hw_goodcrc_tx = true,
+	.hw_goodcrc_rx = true,
+	.gotomin = true,
+	.usb_comm = true,
+	.spec = USB_SPEC_3X,
+	.pd_rev = PD_REVISION_2,
+	.ps = profiles,
+	.nr_ps = ARRAY_SIZE(profiles),
+	.active_ps = 2, /* voltage = 5V, current = 3A */
+};
+
 static uuid_le uuid = UUID_LE(0x482383f0, 0x2876, 0x4e49,
 			      0x86, 0x85, 0xdb, 0x66, 0x21, 0x1a, 0xf0, 0x37);
 

@@ -140,7 +232,102 @@ static void wcove_typec_device_mode(struct wcove_typec *wcove)
 	typec_connect(wcove->port, &wcove->con);
 }
 
-static irqreturn_t wcove_typec_irq(int irq, void *data)
+static int wcove_typec_pd_recv_pkt_handler(struct wcove_typec *wcove)
+{
+	unsigned int rx_status;
+	unsigned int rx_info;
+	unsigned int temp;
+	int len;
+	int ret, i;
+	char buf[USBC_PD_RX_BUF_LEN];
+
+	ret = regmap_read(wcove->regmap, USBC_RX_STATUS, &rx_status);
+	if (ret)
+		goto err;
+
+	while (rx_status & USBC_RX_STATUS_RX_DATA) {
+		ret = regmap_read(wcove->regmap, USBC_RX_INFO, &rx_info);
+		if (ret)
+			goto err;
+
+		len = (USBC_RX_INFO_RXBYTES(rx_info));
+
+		for (i = 0; i < len; i++) {
+			ret = regmap_read(wcove->regmap, USBC_RX_DATA_START + i,
+									&temp);
+			buf[i] = (char)temp;
+			if (ret)
+				goto err;
+		}
+
+		ret = pd_sink_handle_msg(wcove->pd_port_num, buf, len);
+		if (ret) {
+			dev_err(wcove->dev, "pd_sink_handle_msg() failed: %d\n",
+									 ret);
+			/* Clear RX status */
+			regmap_update_bits(wcove->regmap, USBC_RX_STATUS,
+						USBC_RX_STATUS_RX_CLEAR,
+						USBC_RX_STATUS_RX_CLEAR);
+			goto err;
+		}
+
+		/* Clear RX status */
+		regmap_update_bits(wcove->regmap, USBC_RX_STATUS,
+			USBC_RX_STATUS_RX_CLEAR, USBC_RX_STATUS_RX_CLEAR);
+
+		ret = regmap_read(wcove->regmap, USBC_RX_STATUS, &rx_status);
+		if (ret)
+			goto err;
+	}
+
+	return 0;
+
+err:
+	return ret;
+}
+
+static int wcove_typec_pd_tx_pkt_handler(int port_num, void *data,
+				void *buf, int len, enum sop_type pkt_type)
+{
+	unsigned int tx_cmd;
+	unsigned int val;
+	int ret, i;
+	char *buf1 = buf;
+	struct wcove_typec *wcove = data;
+
+	ret = regmap_read(wcove->regmap, USBC_TX_CMD, &tx_cmd);
+	if (ret)
+		goto err;
+
+	if (!(tx_cmd & USBC_TX_CMD_TXBUF_RDY))
+		return -EBUSY;
+
+	for (i = 0; i < len; i++)
+		ret = regmap_write(wcove->regmap, USBC_TX_DATA_START + i,
+								buf1[i]);
+		if (ret)
+			goto err;
+
+	regmap_read(wcove->regmap, USBC_TX_INFO, &val);
+	ret = regmap_write(wcove->regmap, USBC_TX_INFO, 0x71);
+	if (ret)
+		goto err;
+
+	ret = regmap_write(wcove->regmap, USBC_TX_CMD,
+			USBC_TX_CMD_TX_START | (1 << 5));
+	if (ret)
+		goto err;
+
+	ret = regmap_read(wcove->regmap, USBC_TX_CMD, &tx_cmd);
+	if (ret)
+		goto err;
+
+err:
+	kfree(buf1);
+	return ret;
+}
+
+static irqreturn_t  wcove_typec_irq(int irq, void *data)
 {
 	struct wcove_typec *wcove = data;
 	unsigned int cc1_ctrl;

@@ -149,10 +336,10 @@ static irqreturn_t wcove_typec_irq(int irq, void *data)
 	unsigned int cc_irq2;
 	unsigned int status1;
 	unsigned int status2;
+	unsigned int rx_status;
 	int ret;
 
 	mutex_lock(&wcove->lock);
-
 	ret = regmap_read(wcove->regmap, USBC_IRQ1, &cc_irq1);
 	if (ret)
 		goto err;

@@ -177,6 +364,10 @@ static irqreturn_t wcove_typec_irq(int irq, void *data)
 	if (ret)
 		goto err;
 
+	ret = regmap_read(wcove->regmap, USBC_RX_STATUS, &rx_status);
+	if (ret)
+		goto err;
+
 	if (cc_irq1) {
 		if (cc_irq1 & USBC_IRQ1_OVERTEMP)
 			dev_err(wcove->dev, "VCONN Switch Over Temperature!\n");

@@ -185,17 +376,9 @@ static irqreturn_t wcove_typec_irq(int irq, void *data)
 		regmap_write(wcove->regmap, USBC_IRQ1, cc_irq1);
 	}
 
-	if (cc_irq2) {
-		regmap_write(wcove->regmap, USBC_IRQ2, cc_irq2);
-		/*
-		 * Ingoring any PD communication interrupts until the PD stack
-		 * is in place
-		 */
-		if (cc_irq2 & ~USBC_IRQ2_CC_CHANGE) {
-			dev_WARN(wcove->dev, "USB PD handling missing\n");
-			goto err;
-		}
-	}
+	if (cc_irq2 & USBC_IRQ2_RX_PD ||
+		rx_status & USBC_RX_STATUS_RX_DATA)
+		wcove_typec_pd_recv_pkt_handler(wcove);
 
 	if (status1 & USBC_STATUS1_DET_ONGOING)
 		goto out;

@@ -211,24 +394,49 @@ static irqreturn_t wcove_typec_irq(int irq, void *data)
 				 WCOVE_ORIENTATION_NORMAL);
 		/* Host mode by default */
 		wcove_typec_func(wcove, WCOVE_FUNC_ROLE, WCOVE_ROLE_HOST);
-		goto out;
-	}
 
-	if (wcove->con.partner)
+		/* reset the pd sink state */
+		if (wcove->pd_port_num >= 0)
+			pd_sink_reset_state(wcove->pd_port_num);
+
 		goto out;
+	}
 
 	switch (USBC_STATUS1_ORIENT(status1)) {
 	case USBC_ORIENT_NORMAL:
 		wcove_typec_func(wcove, WCOVE_FUNC_ORIENTATION,
 				 WCOVE_ORIENTATION_NORMAL);
+		regmap_update_bits(wcove->regmap, USBC_CC_SEL,
+					USBC_CC_SEL_CCSEL, 0x1);
 		break;
 	case USBC_ORIENT_REVERSE:
 		wcove_typec_func(wcove, WCOVE_FUNC_ORIENTATION,
 				 WCOVE_ORIENTATION_REVERSE);
+		regmap_update_bits(wcove->regmap, USBC_CC_SEL,
+					USBC_CC_SEL_CCSEL, 0x2);
 	default:
 		break;
 	}
 
+	if (cc_irq2 & USBC_IRQ2_RX_HR) {
+		dev_dbg(wcove->dev, "Hard Reset received\n");
+		if (wcove->pd_port_num >= 0)
+			pd_sink_reset_state(wcove->pd_port_num);
+
+	}
+
+	if (cc_irq2 & USBC_IRQ2_RX_CR)
+		dev_info(wcove->dev, "RX CR not implemented\n");
+
+	if (cc_irq2 & USBC_IRQ2_TX_SUCCESS)
+		pd_sink_tx_complete(wcove->pd_port_num);
+
+	if (cc_irq2 & USBC_IRQ2_TX_FAIL)
+		dev_warn(wcove->dev, "TX_FAIL\n");
+
+	if (wcove->con.partner)
+		goto out;
+
 	switch (USBC_STATUS1_RSLT(status1)) {
 	case USBC_RSLT_SRC_DEFAULT:
 		wcove->con.pwr_opmode = TYPEC_PWR_MODE_USB;

@@ -280,7 +488,10 @@ out:
 			 !!(status2 & USBC_STATUS2_VBUS_REQ));
 err:
 	/* REVISIT: Clear WhiskeyCove CHGR Type-C interrupt */
-	regmap_write(wcove->regmap, WCOVE_CHGRIRQ0, BIT(5));
+	regmap_write(wcove->regmap, WCOVE_CHGRIRQ0, BIT(5) | BIT(4) |
+						    BIT(3) | BIT(0));
+	regmap_write(wcove->regmap, USBC_IRQ1, cc_irq1);
+	regmap_write(wcove->regmap, USBC_IRQ2, cc_irq2);
 
 	mutex_unlock(&wcove->lock);
 	return IRQ_HANDLED;

@@ -291,6 +502,8 @@ static int wcove_typec_probe(struct platform_device *pdev)
 	struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent);
 	struct wcove_typec *wcove;
 	unsigned int val;
+	unsigned int status1;
+	unsigned int tx_cmd;
 	int ret;
 
 	wcove = devm_kzalloc(&pdev->dev, sizeof(*wcove), GFP_KERNEL);

@@ -307,26 +520,29 @@ static int wcove_typec_probe(struct platform_device *pdev)
 		return ret;
 
 	ret = devm_request_threaded_irq(&pdev->dev, ret, NULL,
-					wcove_typec_irq, IRQF_ONESHOT,
+				wcove_typec_irq, IRQF_ONESHOT,
 					"wcove_typec", wcove);
 	if (ret)
 		return ret;
 
 	wcove->cap.type = TYPEC_PORT_DRP;
-
 	wcove->port = typec_register_port(&pdev->dev, &wcove->cap);
 	if (IS_ERR(wcove->port))
 		return PTR_ERR(wcove->port);
 
+	/* PD receive packet handler */
+	wcove->pd_port_num = pd_sink_register_port(&profile,
+				wcove_typec_pd_tx_pkt_handler, wcove);
+	if (wcove->pd_port_num) {
+		dev_err(&pdev->dev, "Register pd sink port failed\n");
+		return -EIO;
+	}
+
 	if (!acpi_check_dsm(ACPI_HANDLE(&pdev->dev), uuid.b, 0, 0x1f)) {
 		dev_err(&pdev->dev, "Missing _DSM functions\n");
 		return -ENODEV;
 	}
 
-	/* Make sure the PD PHY is disabled until PD stack is ready */
-	regmap_read(wcove->regmap, USBC_CONTROL3, &val);
-	regmap_write(wcove->regmap, USBC_CONTROL3, val | USBC_CONTROL3_PD_DIS);
-
 	/* DRP mode without accessory support */
 	regmap_read(wcove->regmap, USBC_CONTROL1, &val);
 	regmap_write(wcove->regmap, USBC_CONTROL1, USBC_CONTROL1_MODE_DRP(val));

@@ -337,7 +553,50 @@ static int wcove_typec_probe(struct platform_device *pdev)
 	regmap_read(wcove->regmap, USBC_IRQMASK2, &val);
 	regmap_write(wcove->regmap, USBC_IRQMASK2, val & ~USBC_IRQMASK2_ALL);
 
+	/*Set HW control the ID of outgoing messages*/
+	regmap_write(wcove->regmap, USBC_PD_CFG1, BIT(7));
+
+	/* Enable SOP messages for now */
+	regmap_write(wcove->regmap, USBC_PD_CFG2, BIT(0));
+
+	/*Set the PD revision */
+	regmap_read(wcove->regmap, USBC_PD_CFG3, &val);
+	val = 0x14;
+	regmap_write(wcove->regmap, USBC_PD_CFG3, val);
+
 	platform_set_drvdata(pdev, wcove);
+
+	ret = regmap_read(wcove->regmap, USBC_STATUS1, &status1);
+	if (ret)
+		return ret;
+
+	/* If cable is connected while booting, we would have lost all
+	 * SOURCE_CAP messages. Hence, we send Hard Reset to source so
+	 * that source would send us SOURCE_CAP messages again and we
+	 * can establish PD communication again.
+	*/
+	if (USBC_STATUS1_ORIENT(status1) == USBC_ORIENT_NORMAL ||
+		USBC_STATUS1_ORIENT(status1) == USBC_ORIENT_REVERSE) {
+
+		/* Read TX_CMD register */
+		ret = regmap_read(wcove->regmap, USBC_TX_CMD, &tx_cmd);
+		if (ret)
+			return ret;
+
+		/* Send Hard Reset */
+		ret = regmap_write(wcove->regmap, USBC_TX_CMD, tx_cmd |
+							USBC_PD_SEND_HR);
+		if (ret)
+			return ret;
+
+		/* Start Transmission */
+		ret = regmap_update_bits(wcove->regmap, USBC_TX_CMD,
+						USBC_TX_CMD_TX_START,
+						USBC_TX_CMD_TX_START);
+		if (ret)
+			return ret;
+	}
+
 	return 0;
 }
 

@@ -353,6 +612,7 @@ static int wcove_typec_remove(struct platform_device *pdev)
 	regmap_write(wcove->regmap, USBC_IRQMASK2, val | USBC_IRQMASK2_ALL);
 
 	typec_unregister_port(wcove->port);
+	pd_sink_unregister_port(wcove->pd_port_num);
 	return 0;
 }
 

@@ -366,6 +626,7 @@ static struct platform_driver wcove_typec_driver = {
 
 module_platform_driver(wcove_typec_driver);
 
+MODULE_ALIAS("platform:bxt_wcove_usbc");
 MODULE_AUTHOR("Intel Corporation");
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("WhiskeyCove PMIC USB Type-C PHY driver");