wireless-testing on 4.8-rc1

Hi all,

Now that Linus closed the merge window for 4.8, I'm resuming near-daily wireless-testing builds at:

http://git.kernel.org/cgit/linux/kernel/git/wireless/wireless-testing.git

The first tag in this series is wt-2016-08-08. Let us know of any issues.

Bob Copeland %% http://bobcopeland.com/

Hi Johannes,

I rebased to tag wt-2016-08-22 today and loaded the modules. In my test laptop I have three wireless devices. One PCIe device using brcmsmac driver, ie. mac80211-based driver, and one PCIe and one SDIO device using brcmfmac driver, ie. cfg80211-based driver.

So first thing I did was:

$ iw dev
phy#0
	Interface wlan4
		ifindex 5
		wdev 0x1
		addr 00:90:4c:70:43:35
		type managed
		channel 1 (2412 MHz), width: 20 MHz, center1: 2412 MHz

That got me spooked so checking dmesg:

[  558.943663] brcmfmac mmc0:0001:1 wlan4: renamed from wlan0
[  559.011220] brcmfmac 0000:02:00.0 wlan3: renamed from wlan0
[  597.618650] bcma: bus0: Found chip with id 43224, rev 0x01 and
package 0x0A
[  622.205143] brcmsmac bcma0:1 wlan1: renamed from wlan0

so ran iw again with debugging:

$ iw --version
iw version 4.3-16-g96fa73c-dirty
$ iw --debug dev
-- Debug: Sent Message:
--------------------------   BEGIN NETLINK MESSAGE
---------------------------
  [HEADER] 16 octets
    .nlmsg_len = 20
    .nlmsg_type = 27 <0x1b>
    .nlmsg_flags = 773 <REQUEST,ACK,ROOT,MATCH>
    .nlmsg_seq = 1472068432
    .nlmsg_pid = 3028
  [PAYLOAD] 4 octets
    05 00 00 00                                           ....
---------------------------  END NETLINK MESSAGE
---------------------------
-- Debug: Received Message:
--------------------------   BEGIN NETLINK MESSAGE
---------------------------
  [HEADER] 16 octets
    .nlmsg_len = 120
    .nlmsg_type = 27 <0x1b>
    .nlmsg_flags = 2 <MULTI>
    .nlmsg_seq = 1472068432
    .nlmsg_pid = 3028
  [PAYLOAD] 104 octets
    07 01 00 00 08 00 03 00 05 00 00 00 0a 00 04 00 77 6c ................wl
    61 6e 34 00 00 00 08 00 01 00 00 00 00 00 08 00 05 00 an4...............
    02 00 00 00 0c 00 99 00 01 00 00 00 00 00 00 00 0a 00 ..................
    06 00 00 90 4c 70 43 35 00 00 08 00 2e 00 0d 00 00 00 ....LpC5..........
    08 00 26 00 6c 09 00 00 08 00 27 00 01 00 00 00 08 00 ..&.l.....'.......
    9f 00 01 00 00 00 08 00 a0 00 6c 09 00 00             ..........l...
---------------------------  END NETLINK MESSAGE
---------------------------
phy#0
	Interface wlan4
		ifindex 5
		wdev 0x1
		addr 00:90:4c:70:43:35
		type managed
		channel 1 (2412 MHz), width: 20 MHz, center1: 2412 MHz
-- Debug: Received Message:
--------------------------   BEGIN NETLINK MESSAGE
---------------------------
  [HEADER] 16 octets
    .nlmsg_len = 20
    .nlmsg_type = 3 <DONE>
    .nlmsg_flags = 2 <MULTI>
    .nlmsg_seq = 1472068432
    .nlmsg_pid = 3028
  [PAYLOAD] 4 octets
    00 00 00 00                                           ....
---------------------------  END NETLINK MESSAGE
---------------------------

So nl80211 really reports just one interface. So I decided to revert commit 2d75da13fbb9 ("nl80211: Allow GET_INTERFACE dumps to be filtered") and I got my 3 interfaces listed again. So it seems that the behavior changed for my iw version and I guess it needs to be fixed.

Regards,
Arend