Skip to contentSkip to conversation

ARM: dts: imx7s-warp: Add initial support

PATCH New Fabio Estevam 2 participants 2 messages Jul 12, 2016 – Aug 9, 2016

Subsystems (3)
Device tree bindings Arm i.MX and Layerscape Arm and arm64 SoC sub-architectures (common parts)
lore
Share & tools
lore

Fabio Estevam

author
#0 lore raw

PATCH 1/1 ARM: dts: imx7s-warp: Add initial support

Add the initial support for the Warp7 board.

For more information about this reference design, please visit:

https://www.element14.com/community/docs/DOC-79058/l/warp-7-the-next-generation-wearable-reference-platform

Signed-off-by Fabio Estevam <[email protected]>
---
 arch/arm/boot/dts/Makefile       |   3 +-
 arch/arm/boot/dts/imx7s-warp.dts | 246 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 248 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/imx7s-warp.dts
arch/arm/boot/dts/Makefile +2 -1
index 7df2446..c159ced 100644
@@ -416,7 +416,8 @@ dtb-$(CONFIG_SOC_IMX7D) += \
 	imx7d-nitrogen7.dtb \
 	imx7d-sbc-imx7.dtb \
 	imx7d-sdb.dtb \
-	imx7s-colibri-eval-v3.dtb
+	imx7s-colibri-eval-v3.dtb \
+	imx7s-warp.dtb
 dtb-$(CONFIG_SOC_LS1021A) += \
 	ls1021a-qds.dtb \
 	ls1021a-twr.dtb
arch/arm/boot/dts/imx7s-warp.dts new file +246 -0

246 lines not on this page · raw message

Signature · 1 line
1.9.1