drm/i915: intel_dp_link_is_valid() should only return status of link
Subsystems (2)
PATCH v2 1/1 drm/i915: intel_dp_link_is_valid() should only return status of link
Intel_dp_link_is_valid() function reads the Link status registers and returns a boolean to indicate link is valid or not.
If the link has lost lock and is not valid any more, link training is performed outside the function else previously trained link is retained.
This gives us flexibility of checking whether link is valid and training it independently.
v2:
* Changed the function name from intel_dp_check_link_status() to intel_dp_link_is_valid() (Lukas Wunner)
* Checks for CRTC and active CRTC are moved outside the intel_dp_link_is_valid() function (Rodrigo Vivi)
--- drivers/gpu/drm/i915/intel_dp.c | 56 +++++++++++++++++++++++++++-------------- 1 file changed, 37 insertions(+), 19 deletions(-)
drivers/gpu/drm/i915/intel_dp.c +37 -19
@@ -3881,36 +3881,33 @@ go_again:return -EINVAL ; } -static void -intel_dp_check_link_status (struct intel_dp *intel_dp) +static bool +intel_dp_link_is_valid (struct intel_dp *intel_dp) { -struct intel_encoder *intel_encoder = &dp_to_dig_port (intel_dp)->base;struct drm_device *dev =intel_dp_to_dev (intel_dp);u8 link_status[DP_LINK_STATUS_SIZE ];WARN_ON (!drm_modeset_is_locked (&dev->mode_config.connection_mutex));if (!intel_dp_get_link_status (intel_dp, link_status)) { -DRM_ERROR ("Failed to get link status\n" ); -return ; +DRM_DEBUG_KMS ("Failed to get link status\n" ); +return false; } -if (!intel_encoder->base.crtc) -return ; +/* Check if the link is valid by reading the bits of Link status +* registers +*/ +if (!drm_dp_channel_eq_ok (link_status, intel_dp->lane_count)) { +DRM_DEBUG_KMS ("Channel EQ or CR not ok, need to retrain\n" ); +return false; + } -if (!to_intel_crtc (intel_encoder->base.crtc)->active) -return ; +DRM_DEBUG_KMS ("Link is good, no need to retrain\n" ); +return true; -/* if link training is requested we should perform it always */ -if ((intel_dp->compliance_test_type ==DP_TEST_LINK_TRAINING ) || - (!drm_dp_channel_eq_ok (link_status, intel_dp->lane_count))) { -DRM_DEBUG_KMS ("%s: channel EQ not ok, retraining\n" , - intel_encoder->base.name); -intel_dp_start_link_train (intel_dp); -intel_dp_stop_link_train (intel_dp); - } } +/* * According to DP spec * 5.1.2:
@@ -3928,6 +3925,8 @@ static bool intel_dp_short_pulse(struct intel_dp *intel_dp) {struct drm_device *dev =intel_dp_to_dev (intel_dp); +struct intel_digital_port *intel_dig_port =dp_to_dig_port (intel_dp); +struct intel_encoder *intel_encoder = &intel_dig_port->base;u8 sink_irq_vector =0 ;u8 old_sink_count = intel_dp->sink_count;bool ret;
@@ -3968,8 +3967,18 @@ intel_dp_short_pulse(struct intel_dp *intel_dp)DRM_DEBUG_DRIVER ("CP or sink specific irq unhandled\n" ); } +/* Do not train the link if there is no crtc */ +if (!intel_encoder->base.crtc) +return true; +if (!to_intel_crtc (intel_encoder->base.crtc)->active) +return true; +drm_modeset_lock (&dev->mode_config.connection_mutex,NULL ); -intel_dp_check_link_status (intel_dp); +if (!intel_dp_link_is_valid (intel_dp) || + intel_dp->compliance_test_type ==DP_TEST_LINK_TRAINING ) { +intel_dp_start_link_train (intel_dp); +intel_dp_stop_link_train (intel_dp); + }drm_modeset_unlock (&dev->mode_config.connection_mutex);return true;
@@ -4298,8 +4307,17 @@ intel_dp_long_pulse(struct intel_connector *intel_connector)* check links status, there has been known issues of * link loss triggerring long pulse!!!! */ +/* Do not train the link if there is no crtc */ +if (!intel_encoder->base.crtc) + goto out; +if (!to_intel_crtc (intel_encoder->base.crtc)->active) + goto out; +drm_modeset_lock (&dev->mode_config.connection_mutex,NULL ); -intel_dp_check_link_status (intel_dp); +if (!intel_dp_link_is_valid (intel_dp)) { +intel_dp_start_link_train (intel_dp); +intel_dp_stop_link_train (intel_dp); + }drm_modeset_unlock (&dev->mode_config.connection_mutex); goto out; }
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 42 lines · Manasi Navare
Intel_dp_link_is_valid()function reads the Link status registers and returns a boolean to indicate link is valid or not.
If the link has lost lock and is not valid any more, link training is performed outside the function else previously trained link is retained.
This gives us flexibility of checking whether link is valid and training it independently.v2:
* Changed the function name fromintel_dp_check_link_status()tointel_dp_link_is_valid()(Lukas Wunner)
* Checks for CRTC and active CRTC are moved outside theintel_dp_link_is_valid()function (Rodrigo Vivi)Signed-off-by Manasi Navare <[email protected]>--- drivers/gpu/drm/i915/intel_dp.c | 56 +++++++++++++++++++++++++++-------------- 1 file changed, 37 insertions(+), 19 deletions(-)drivers/gpu/drm/i915/intel_dp.c +3
-5@@ -3881,36 +3881,33 @@ go_again:return -EINVAL ; } -static void -intel_dp_check_link_status (struct intel_dp *intel_dp) +static bool +intel_dp_link_is_valid (struct intel_dp *intel_dp) { -struct intel_encoder *intel_encoder = &dp_to_dig_port (intel_dp)->base;struct drm_device *dev =intel_dp_to_dev (intel_dp);u8 link_status[DP_LINK_STATUS_SIZE ];WARN_ON (!drm_modeset_is_locked (&dev->mode_config.connection_mutex));if (!intel_dp_get_link_status (intel_dp, link_status)) { -DRM_ERROR ("Failed to get link status\n" ); -return ; +DRM_DEBUG_KMS ("Failed to get link status\n" );
drivers/gpu/drm/i915/intel_dp.c go_again: · line 3901
Quoted 10 lines
drivers/gpu/drm/i915/intel_dp.c +6
-2+return false; } -if (!intel_encoder->base.crtc) -return ; +/* Check if the link is valid by reading the bits of Link status +* registers +*/ +if (!drm_dp_channel_eq_ok (link_status, intel_dp->lane_count)) { +DRM_DEBUG_KMS ("Channel EQ or CR not ok, need to retrain\n" );
drm_dp_channel_eq_ok() does not check for CR. Should we just say "Channel EQ not ok" to preempt ambiguity while debugging ?
drivers/gpu/drm/i915/intel_dp.c go_again: · line 3905
Quoted 6 lines
drivers/gpu/drm/i915/intel_dp.c +3
-2+return false; + } -if (!to_intel_crtc (intel_encoder->base.crtc)->active) -return ; +DRM_DEBUG_KMS ("Link is good, no need to retrain\n" );
The caller does not expect us to link train anymore, I don't think we have to explicitly state "no need to retrain". Also, do we need debug messages if the link is good?
Quoted 26 lines
drivers/gpu/drm/i915/intel_dp.c +4
-8+return true; -/* if link training is requested we should perform it always */ -if ((intel_dp->compliance_test_type ==DP_TEST_LINK_TRAINING ) || - (!drm_dp_channel_eq_ok (link_status, intel_dp->lane_count))) { -DRM_DEBUG_KMS ("%s: channel EQ not ok, retraining\n" , - intel_encoder->base.name); -intel_dp_start_link_train (intel_dp); -intel_dp_stop_link_train (intel_dp); - } } +/* * According to DP spec * 5.1.2: @@ -3928,6 +3925,8 @@ static bool intel_dp_short_pulse(struct intel_dp *intel_dp) {struct drm_device *dev =intel_dp_to_dev (intel_dp); +struct intel_digital_port *intel_dig_port =dp_to_dig_port (intel_dp); +struct intel_encoder *intel_encoder = &intel_dig_port->base;u8 sink_irq_vector =0 ;u8 old_sink_count = intel_dp->sink_count;bool ret;
drivers/gpu/drm/i915/intel_dp.c intel_dp_short_pulse(struct intel_dp *intel_dp) · line 3975
Quoted 9 lines
drivers/gpu/drm/i915/intel_dp.c +6
-0@@ -3968,8 +3967,18 @@ intel_dp_short_pulse(struct intel_dp *intel_dp)DRM_DEBUG_DRIVER ("CP or sink specific irq unhandled\n" ); } +/* Do not train the link if there is no crtc */ +if (!intel_encoder->base.crtc) +return true; +if (!to_intel_crtc (intel_encoder->base.crtc)->active) +return true; +
I might be completely off base here. Shouldn't we keep the link valid irrespective of whether there is an active crtc? I thought that is what the refactoring is supposed to enable. Does intel_dp_short_pulse() get called when there is a link loss during upfront link training? And in that case, shouldn't we retrain even without a crtc?
Besides that, how about using just one return?
struct drm_crtc *crtc = intel_encoder->base.crtc;
if (crtc == NULL || !to_intel_crtc(crtc)->active)
return true;
Quoted 19 lines
drivers/gpu/drm/i915/intel_dp.c +10
-1drm_modeset_lock (&dev->mode_config.connection_mutex,NULL ); -intel_dp_check_link_status (intel_dp); +if (!intel_dp_link_is_valid (intel_dp) || + intel_dp->compliance_test_type ==DP_TEST_LINK_TRAINING ) { +intel_dp_start_link_train (intel_dp); +intel_dp_stop_link_train (intel_dp); + }drm_modeset_unlock (&dev->mode_config.connection_mutex);return true;@@ -4298,8 +4307,17 @@ intel_dp_long_pulse(struct intel_connector *intel_connector)* check links status, there has been known issues of * link loss triggerring long pulse!!!! */ +/* Do not train the link if there is no crtc */ +if (!intel_encoder->base.crtc) + goto out; +if (!to_intel_crtc (intel_encoder->base.crtc)->active) + goto out;
drivers/gpu/drm/i915/intel_dp.c intel_dp_long_pulse(struct intel_connector *intel_connector) · line 4323
Quoted 10 lines
drivers/gpu/drm/i915/intel_dp.c +5
-1+drm_modeset_lock (&dev->mode_config.connection_mutex,NULL ); -intel_dp_check_link_status (intel_dp); +if (!intel_dp_link_is_valid (intel_dp)) { +intel_dp_start_link_train (intel_dp); +intel_dp_stop_link_train (intel_dp); + }drm_modeset_unlock (&dev->mode_config.connection_mutex); goto out; }
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 46 lines · Dhinakaran
Quoted 45 lines · Manasi Navare
Intel_dp_link_is_valid()function reads the Link status registers and returns a boolean to indicate link is valid or not.
If the link has lost lock and is not valid any more, link training is performed outside the function else previously trained link is retained.
This gives us flexibility of checking whether link is valid and training it independently.v2:
* Changed the function name fromintel_dp_check_link_status()tointel_dp_link_is_valid()(Lukas Wunner)
* Checks for CRTC and active CRTC are moved outside theintel_dp_link_is_valid()function (Rodrigo Vivi)Signed-off-by Manasi Navare <[email protected]>--- drivers/gpu/drm/i915/intel_dp.c | 56 +++++++++++++++++++++++++++-------------- 1 file changed, 37 insertions(+), 19 deletions(-)drivers/gpu/drm/i915/intel_dp.c +4
-5@@ -3881,36 +3881,33 @@ go_again:return -EINVAL ; } -static void -intel_dp_check_link_status (struct intel_dp *intel_dp) +static bool +intel_dp_link_is_valid (struct intel_dp *intel_dp) { -struct intel_encoder *intel_encoder = &dp_to_dig_port (intel_dp)->base;struct drm_device *dev =intel_dp_to_dev (intel_dp);u8 link_status[DP_LINK_STATUS_SIZE ];WARN_ON (!drm_modeset_is_locked (&dev->mode_config.connection_mutex));if (!intel_dp_get_link_status (intel_dp, link_status)) { -DRM_ERROR ("Failed to get link status\n" ); -return ; +DRM_DEBUG_KMS ("Failed to get link status\n" ); +return false; }
Quoted 9 lines
drivers/gpu/drm/i915/intel_dp.c go_again: · line 3901
Quoted 7 lines
drivers/gpu/drm/i915/intel_dp.c +5
-2-if (!intel_encoder->base.crtc) -return ; +/* Check if the link is valid by reading the bits of Link status +* registers +*/ +if (!drm_dp_channel_eq_ok (link_status, intel_dp->lane_count)) { +DRM_DEBUG_KMS ("Channel EQ or CR not ok, need to retrain\n" );
drm_dp_channel_eq_ok()does not check for CR. Should we just say "Channel EQ not ok" to preempt ambiguity while debugging ?
Actually this macro checks for DP_CHANNEL_EQ_BITS which is defined as:
#define DP_CHANNEL_EQ_BITS (DP_LANE_CR_DONE | \
DP_LANE_CHANNEL_EQ_DONE | \
DP_LANE_SYMBOL_LOCKED)So it includes checking for Channel EQ and Clock Recovery CR bits
Quoted 10 lines
drivers/gpu/drm/i915/intel_dp.c go_again: · line 3905
Quoted 7 lines
drivers/gpu/drm/i915/intel_dp.c +3
-2+return false; + } -if (!to_intel_crtc (intel_encoder->base.crtc)->active) -return ; +DRM_DEBUG_KMS ("Link is good, no need to retrain\n" );The caller does not expect us to link train anymore, I don't think we have to explicitly state "no need to retrain". Also, do we need debug messages if the link is good?
I agree , maybe this is not needed. I will remove this
Quoted 30 lines
Quoted 30 lines
drivers/gpu/drm/i915/intel_dp.c +4
-8+return true; -/* if link training is requested we should perform it always */ -if ((intel_dp->compliance_test_type ==DP_TEST_LINK_TRAINING ) || - (!drm_dp_channel_eq_ok (link_status, intel_dp->lane_count))) { -DRM_DEBUG_KMS ("%s: channel EQ not ok, retraining\n" , - intel_encoder->base.name); -intel_dp_start_link_train (intel_dp); -intel_dp_stop_link_train (intel_dp); - } } +/* * According to DP spec * 5.1.2: @@ -3928,6 +3925,8 @@ static bool intel_dp_short_pulse(struct intel_dp *intel_dp) {struct drm_device *dev =intel_dp_to_dev (intel_dp); +struct intel_digital_port *intel_dig_port =dp_to_dig_port (intel_dp); +struct intel_encoder *intel_encoder = &intel_dig_port->base;u8 sink_irq_vector =0 ;u8 old_sink_count = intel_dp->sink_count;bool ret;@@ -3968,8 +3967,18 @@ intel_dp_short_pulse(struct intel_dp *intel_dp)DRM_DEBUG_DRIVER ("CP or sink specific irq unhandled\n" ); }
Quoted 11 lines
drivers/gpu/drm/i915/intel_dp.c intel_dp_short_pulse(struct intel_dp *intel_dp) · line 3975
Quoted 6 lines
drivers/gpu/drm/i915/intel_dp.c +6
-0+/* Do not train the link if there is no crtc */ +if (!intel_encoder->base.crtc) +return true; +if (!to_intel_crtc (intel_encoder->base.crtc)->active) +return true; +I might be completely off base here. Shouldn't we keep the link valid irrespective of whether there is an active crtc? I thought that is what the refactoring is supposed to enable. Does
intel_dp_short_pulse()get called when there is a link loss during upfront link training? And in that case, shouldn't we retrain even without a crtc?
We cannot ever retrain without a CRTC. This check is more for making sure that the clocks are set up befofe we try to retrain else we will see AUX channel failures.
If I track this back in the kernel tree, this check was added to avoid the lock up issues on some platforms.
Quoted 9 lines
Besides that, how about using just one return?
struct
drm_crtc*crtc =intel_encoder->base.crtc;if (crtc == NULL || !to_intel_crtc(crtc)->active)
return true;
The only problem with doing both these checks together is that if crtc is NULL then we are trying to dereference a NULL pointer in the second check. So it should be seuqential, check if crtc is active only if there is crtc available.
Manasi
Quoted 21 lines
Quoted 21 lines
drivers/gpu/drm/i915/intel_dp.c +11
-1drm_modeset_lock (&dev->mode_config.connection_mutex,NULL ); -intel_dp_check_link_status (intel_dp); +if (!intel_dp_link_is_valid (intel_dp) || + intel_dp->compliance_test_type ==DP_TEST_LINK_TRAINING ) { +intel_dp_start_link_train (intel_dp); +intel_dp_stop_link_train (intel_dp); + }drm_modeset_unlock (&dev->mode_config.connection_mutex);return true;@@ -4298,8 +4307,17 @@ intel_dp_long_pulse(struct intel_connector *intel_connector)* check links status, there has been known issues of * link loss triggerring long pulse!!!! */ +/* Do not train the link if there is no crtc */ +if (!intel_encoder->base.crtc) + goto out; +if (!to_intel_crtc (intel_encoder->base.crtc)->active) + goto out; +drm_modeset_lock (&dev->mode_config.connection_mutex,NULL );
Quoted 9 lines
drivers/gpu/drm/i915/intel_dp.c intel_dp_long_pulse(struct intel_connector *intel_connector) · line 4323
Quoted 8 lines
drivers/gpu/drm/i915/intel_dp.c +4
-1-intel_dp_check_link_status (intel_dp); +if (!intel_dp_link_is_valid (intel_dp)) { +intel_dp_start_link_train (intel_dp); +intel_dp_stop_link_train (intel_dp); + }drm_modeset_unlock (&dev->mode_config.connection_mutex); goto out; }
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 57 lines · Manasi Navare
Quoted 46 lines · Dhinakaran
Quoted 45 lines · Manasi Navare
Intel_dp_link_is_valid()function reads the Link status registers and returns a boolean to indicate link is valid or not.
If the link has lost lock and is not valid any more, link training is performed outside the function else previously trained link is retained.
This gives us flexibility of checking whether link is valid and training it independently.v2:
* Changed the function name fromintel_dp_check_link_status()tointel_dp_link_is_valid()(Lukas Wunner)
* Checks for CRTC and active CRTC are moved outside theintel_dp_link_is_valid()function (Rodrigo Vivi)Signed-off-by Manasi Navare <[email protected]>--- drivers/gpu/drm/i915/intel_dp.c | 56 +++++++++++++++++++++++++++-------------- 1 file changed, 37 insertions(+), 19 deletions(-)drivers/gpu/drm/i915/intel_dp.c +4
-5@@ -3881,36 +3881,33 @@ go_again:return -EINVAL ; } -static void -intel_dp_check_link_status (struct intel_dp *intel_dp) +static bool +intel_dp_link_is_valid (struct intel_dp *intel_dp) { -struct intel_encoder *intel_encoder = &dp_to_dig_port (intel_dp)->base;struct drm_device *dev =intel_dp_to_dev (intel_dp);u8 link_status[DP_LINK_STATUS_SIZE ];WARN_ON (!drm_modeset_is_locked (&dev->mode_config.connection_mutex));if (!intel_dp_get_link_status (intel_dp, link_status)) { -DRM_ERROR ("Failed to get link status\n" ); -return ; +DRM_DEBUG_KMS ("Failed to get link status\n" ); +return false; }Quoted 9 lines
drivers/gpu/drm/i915/intel_dp.c go_again: · line 3901
Quoted 7 lines
drivers/gpu/drm/i915/intel_dp.c +5
-2-if (!intel_encoder->base.crtc) -return ; +/* Check if the link is valid by reading the bits of Link status +* registers +*/ +if (!drm_dp_channel_eq_ok (link_status, intel_dp->lane_count)) { +DRM_DEBUG_KMS ("Channel EQ or CR not ok, need to retrain\n" );
drm_dp_channel_eq_ok()does not check for CR. Should we just say "Channel EQ not ok" to preempt ambiguity while debugging ?
Quoted 7 lines
Actually this macro checks for
DP_CHANNEL_EQ_BITSwhich is defined as:#define DP_CHANNEL_EQ_BITS (DP_LANE_CR_DONE | \ DP_LANE_CHANNEL_EQ_DONE | \ DP_LANE_SYMBOL_LOCKED)So it includes checking for Channel EQ and Clock Recovery CR bits
Thank you, I should have looked hard. I will leave this to you.
Quoted 55 lines
Quoted 10 lines
drivers/gpu/drm/i915/intel_dp.c go_again: · line 3905
Quoted 7 lines
drivers/gpu/drm/i915/intel_dp.c +3
-2+return false; + } -if (!to_intel_crtc (intel_encoder->base.crtc)->active) -return ; +DRM_DEBUG_KMS ("Link is good, no need to retrain\n" );The caller does not expect us to link train anymore, I don't think we have to explicitly state "no need to retrain". Also, do we need debug messages if the link is good?
I agree , maybe this is not needed. I will remove this
Quoted 30 lines
Quoted 30 lines
drivers/gpu/drm/i915/intel_dp.c +4
-8+return true; -/* if link training is requested we should perform it always */ -if ((intel_dp->compliance_test_type ==DP_TEST_LINK_TRAINING ) || - (!drm_dp_channel_eq_ok (link_status, intel_dp->lane_count))) { -DRM_DEBUG_KMS ("%s: channel EQ not ok, retraining\n" , - intel_encoder->base.name); -intel_dp_start_link_train (intel_dp); -intel_dp_stop_link_train (intel_dp); - } } +/* * According to DP spec * 5.1.2: @@ -3928,6 +3925,8 @@ static bool intel_dp_short_pulse(struct intel_dp *intel_dp) {struct drm_device *dev =intel_dp_to_dev (intel_dp); +struct intel_digital_port *intel_dig_port =dp_to_dig_port (intel_dp); +struct intel_encoder *intel_encoder = &intel_dig_port->base;u8 sink_irq_vector =0 ;u8 old_sink_count = intel_dp->sink_count;bool ret;@@ -3968,8 +3967,18 @@ intel_dp_short_pulse(struct intel_dp *intel_dp)DRM_DEBUG_DRIVER ("CP or sink specific irq unhandled\n" ); }Quoted 11 lines
drivers/gpu/drm/i915/intel_dp.c intel_dp_short_pulse(struct intel_dp *intel_dp) · line 3975
Quoted 6 lines
drivers/gpu/drm/i915/intel_dp.c +6
-0+/* Do not train the link if there is no crtc */ +if (!intel_encoder->base.crtc) +return true; +if (!to_intel_crtc (intel_encoder->base.crtc)->active) +return true; +I might be completely off base here. Shouldn't we keep the link valid irrespective of whether there is an active crtc? I thought that is what the refactoring is supposed to enable. Does
intel_dp_short_pulse()get called when there is a link loss during upfront link training? And in that case, shouldn't we retrain even without a crtc?
Quoted 4 lines
We cannot ever retrain without a CRTC. This check is more for making sure that the clocks are set up befofe we try to retrain else we will see AUX channel failures.
If I track this back in the kernel tree, this check was added to avoid the lock up issues on some platforms.
So, crtc will be active by the time we get short pulse for upfront link training failures ?
Quoted 10 lines
Quoted 9 lines
Besides that, how about using just one return?
struct
drm_crtc*crtc =intel_encoder->base.crtc;if (crtc == NULL || !to_intel_crtc(crtc)->active)
return true;
Quoted 6 lines
The only problem with doing both these checks together is that if crtc is NULL then we are trying to dereference a NULL pointer in the second check. So it should be seuqential, check if crtc is active only if there is crtc available.
Manasi
afaik the second check won't be evaluated if the first is True.
Quoted 30 lines
Quoted 21 lines
Quoted 21 lines
drivers/gpu/drm/i915/intel_dp.c +11
-1drm_modeset_lock (&dev->mode_config.connection_mutex,NULL ); -intel_dp_check_link_status (intel_dp); +if (!intel_dp_link_is_valid (intel_dp) || + intel_dp->compliance_test_type ==DP_TEST_LINK_TRAINING ) { +intel_dp_start_link_train (intel_dp); +intel_dp_stop_link_train (intel_dp); + }drm_modeset_unlock (&dev->mode_config.connection_mutex);return true;@@ -4298,8 +4307,17 @@ intel_dp_long_pulse(struct intel_connector *intel_connector)* check links status, there has been known issues of * link loss triggerring long pulse!!!! */ +/* Do not train the link if there is no crtc */ +if (!intel_encoder->base.crtc) + goto out; +if (!to_intel_crtc (intel_encoder->base.crtc)->active) + goto out; +drm_modeset_lock (&dev->mode_config.connection_mutex,NULL );Quoted 9 lines
drivers/gpu/drm/i915/intel_dp.c intel_dp_long_pulse(struct intel_connector *intel_connector) · line 4323
Quoted 8 lines
drivers/gpu/drm/i915/intel_dp.c +4
-1-intel_dp_check_link_status (intel_dp); +if (!intel_dp_link_is_valid (intel_dp)) { +intel_dp_start_link_train (intel_dp); +intel_dp_stop_link_train (intel_dp); + }drm_modeset_unlock (&dev->mode_config.connection_mutex); goto out; }
Quoted 4 lines
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 123 lines · Dhinakaran
Quoted 57 lines · Manasi Navare
Quoted 46 lines · Dhinakaran
Quoted 45 lines · Manasi Navare
Intel_dp_link_is_valid()function reads the Link status registers and returns a boolean to indicate link is valid or not.
If the link has lost lock and is not valid any more, link training is performed outside the function else previously trained link is retained.
This gives us flexibility of checking whether link is valid and training it independently.v2:
* Changed the function name fromintel_dp_check_link_status()tointel_dp_link_is_valid()(Lukas Wunner)
* Checks for CRTC and active CRTC are moved outside theintel_dp_link_is_valid()function (Rodrigo Vivi)Signed-off-by Manasi Navare <[email protected]>--- drivers/gpu/drm/i915/intel_dp.c | 56 +++++++++++++++++++++++++++-------------- 1 file changed, 37 insertions(+), 19 deletions(-)drivers/gpu/drm/i915/intel_dp.c +4
-5@@ -3881,36 +3881,33 @@ go_again:return -EINVAL ; } -static void -intel_dp_check_link_status (struct intel_dp *intel_dp) +static bool +intel_dp_link_is_valid (struct intel_dp *intel_dp) { -struct intel_encoder *intel_encoder = &dp_to_dig_port (intel_dp)->base;struct drm_device *dev =intel_dp_to_dev (intel_dp);u8 link_status[DP_LINK_STATUS_SIZE ];WARN_ON (!drm_modeset_is_locked (&dev->mode_config.connection_mutex));if (!intel_dp_get_link_status (intel_dp, link_status)) { -DRM_ERROR ("Failed to get link status\n" ); -return ; +DRM_DEBUG_KMS ("Failed to get link status\n" ); +return false; }Quoted 9 lines
drivers/gpu/drm/i915/intel_dp.c go_again: · line 3901
Quoted 7 lines
drivers/gpu/drm/i915/intel_dp.c +5
-2-if (!intel_encoder->base.crtc) -return ; +/* Check if the link is valid by reading the bits of Link status +* registers +*/ +if (!drm_dp_channel_eq_ok (link_status, intel_dp->lane_count)) { +DRM_DEBUG_KMS ("Channel EQ or CR not ok, need to retrain\n" );
drm_dp_channel_eq_ok()does not check for CR. Should we just say "Channel EQ not ok" to preempt ambiguity while debugging ?Quoted 7 lines
Actually this macro checks for
DP_CHANNEL_EQ_BITSwhich is defined as:#define DP_CHANNEL_EQ_BITS (DP_LANE_CR_DONE | \ DP_LANE_CHANNEL_EQ_DONE | \ DP_LANE_SYMBOL_LOCKED)So it includes checking for Channel EQ and Clock Recovery CR bits
Thank you, I should have looked hard. I will leave this to you.
Quoted 55 lines
Quoted 10 lines
drivers/gpu/drm/i915/intel_dp.c go_again: · line 3905
Quoted 7 lines
drivers/gpu/drm/i915/intel_dp.c +3
-2+return false; + } -if (!to_intel_crtc (intel_encoder->base.crtc)->active) -return ; +DRM_DEBUG_KMS ("Link is good, no need to retrain\n" );The caller does not expect us to link train anymore, I don't think we have to explicitly state "no need to retrain". Also, do we need debug messages if the link is good?
I agree , maybe this is not needed. I will remove this
Quoted 41 lines
Quoted 27 lines
drivers/gpu/drm/i915/intel_dp.c +4
-8+return true; -/* if link training is requested we should perform it always */ -if ((intel_dp->compliance_test_type ==DP_TEST_LINK_TRAINING ) || - (!drm_dp_channel_eq_ok (link_status, intel_dp->lane_count))) { -DRM_DEBUG_KMS ("%s: channel EQ not ok, retraining\n" , - intel_encoder->base.name); -intel_dp_start_link_train (intel_dp); -intel_dp_stop_link_train (intel_dp); - } } +/* * According to DP spec * 5.1.2: @@ -3928,6 +3925,8 @@ static bool intel_dp_short_pulse(struct intel_dp *intel_dp) {struct drm_device *dev =intel_dp_to_dev (intel_dp); +struct intel_digital_port *intel_dig_port =dp_to_dig_port (intel_dp); +struct intel_encoder *intel_encoder = &intel_dig_port->base;u8 sink_irq_vector =0 ;u8 old_sink_count = intel_dp->sink_count;bool ret;drivers/gpu/drm/i915/intel_dp.c intel_dp_short_pulse(struct intel_dp *intel_dp) · line 3975
Quoted 9 lines
drivers/gpu/drm/i915/intel_dp.c +6
-0@@ -3968,8 +3967,18 @@ intel_dp_short_pulse(struct intel_dp *intel_dp)DRM_DEBUG_DRIVER ("CP or sink specific irq unhandled\n" ); } +/* Do not train the link if there is no crtc */ +if (!intel_encoder->base.crtc) +return true; +if (!to_intel_crtc (intel_encoder->base.crtc)->active) +return true; +I might be completely off base here. Shouldn't we keep the link valid irrespective of whether there is an active crtc? I thought that is what the refactoring is supposed to enable. Does
intel_dp_short_pulse()get called when there is a link loss during upfront link training? And in that case, shouldn't we retrain even without a crtc?
Quoted 7 lines
Quoted 4 lines
We cannot ever retrain without a CRTC. This check is more for making sure that the clocks are set up befofe we try to retrain else we will see AUX channel failures.
If I track this back in the kernel tree, this check was added to avoid the lock up issues on some platforms.So, crtc will be active by the time we get short pulse for upfront link training failures ?
So the way locks are taken by upfront link train, it would have enabled the crtc before it can handle link loss related short pulses.
Quoted 11 lines
Quoted 11 lines
Quoted 10 lines
Besides that, how about using just one return?
struct
drm_crtc*crtc =intel_encoder->base.crtc;if (crtc == NULL || !to_intel_crtc(crtc)->active)
return true;
Quoted 9 lines
Quoted 6 lines
The only problem with doing both these checks together is that if crtc is NULL then we are trying to dereference a NULL pointer in the second check. So it should be seuqential, check if crtc is active only if there is crtc available.
Manasi
afaik the second check won't be evaluated if the first is True.
Yup, makes sense. I will change that
Quoted 30 lines
Quoted 30 lines
Quoted 30 lines
Quoted 29 lines
drivers/gpu/drm/i915/intel_dp.c +15
-2drm_modeset_lock (&dev->mode_config.connection_mutex,NULL ); -intel_dp_check_link_status (intel_dp); +if (!intel_dp_link_is_valid (intel_dp) || + intel_dp->compliance_test_type ==DP_TEST_LINK_TRAINING ) { +intel_dp_start_link_train (intel_dp); +intel_dp_stop_link_train (intel_dp); + }drm_modeset_unlock (&dev->mode_config.connection_mutex);return true;@@ -4298,8 +4307,17 @@ intel_dp_long_pulse(struct intel_connector *intel_connector)* check links status, there has been known issues of * link loss triggerring long pulse!!!! */ +/* Do not train the link if there is no crtc */ +if (!intel_encoder->base.crtc) + goto out; +if (!to_intel_crtc (intel_encoder->base.crtc)->active) + goto out; +drm_modeset_lock (&dev->mode_config.connection_mutex,NULL ); -intel_dp_check_link_status (intel_dp); +if (!intel_dp_link_is_valid (intel_dp)) { +intel_dp_start_link_train (intel_dp); +intel_dp_stop_link_train (intel_dp); + }drm_modeset_unlock (&dev->mode_config.connection_mutex); goto out; }
Quoted 5 lines
Quoted 4 lines
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Ro.CI.BAT: failure for drm/i915: intel_dp_link_is_valid() should only return status of link (rev2)
In reply to Manasi Navare== Series Details ==
== Series Details ==
Series: drm/i915: intel_dp_link_is_valid() should only return status of link (rev2)
URL : https://patchwork.freedesktop.org/series/9737/
State : failure
== Summary ==
Series 9737v2 drm/i915: intel_dp_link_is_valid() should only return status of link
http://patchwork.freedesktop.org/api/1.0/series/9737/revisions/2/mbox
Test gem_exec_suspend:
Subgroup basic-s3:
pass -> INCOMPLETE (fi-hsw-i7-4770k)
Test gem_flink_basic:
Subgroup bad-open:
pass -> INCOMPLETE (fi-skl-i7-6700k)
Test kms_cursor_legacy:
Subgroup basic-cursor-vs-flip-varying-size:
pass -> FAIL (ro-ilk1-i5-650)
Subgroup basic-flip-vs-cursor-legacy:
fail -> PASS (ro-skl3-i5-6260u)
Subgroup basic-flip-vs-cursor-varying-size:
fail -> PASS (ro-byt-n2820)
Test kms_pipe_crc_basic:
Subgroup read-crc-pipe-a:
pass -> DMESG-WARN (ro-byt-n2820)
Subgroup read-crc-pipe-b-frame-sequence:
fail -> PASS (ro-ivb2-i7-3770)
Subgroup suspend-read-crc-pipe-a:
dmesg-warn -> SKIP (ro-bdw-i5-5250u)
Subgroup suspend-read-crc-pipe-c:
skip -> DMESG-WARN (ro-bdw-i5-5250u)fi-hsw-i7-4770k total:107 pass:91 dwarn:0 dfail:0 fail:0 skip:15 fi-kbl-qkkr total:244 pass:186 dwarn:28 dfail:0 fail:3 skip:27 fi-skl-i5-6260u total:244 pass:224 dwarn:4 dfail:0 fail:2 skip:14 fi-skl-i7-6700k total:112 pass:87 dwarn:1 dfail:0 fail:0 skip:23 fi-snb-i7-2600 total:244 pass:202 dwarn:0 dfail:0 fail:0 skip:42 ro-bdw-i5-5250u total:240 pass:218 dwarn:2 dfail:0 fail:2 skip:18 ro-bdw-i7-5600u total:240 pass:206 dwarn:1 dfail:0 fail:1 skip:32 ro-bsw-n3050 total:240 pass:193 dwarn:0 dfail:0 fail:4 skip:43 ro-byt-n2820 total:240 pass:197 dwarn:1 dfail:0 fail:2 skip:40 ro-hsw-i3-4010u total:240 pass:214 dwarn:0 dfail:0 fail:0 skip:26 ro-hsw-i7-4770r total:240 pass:185 dwarn:0 dfail:0 fail:0 skip:55 ro-ilk1-i5-650 total:235 pass:173 dwarn:0 dfail:0 fail:2 skip:60 ro-ivb-i7-3770 total:240 pass:205 dwarn:0 dfail:0 fail:0 skip:35 ro-ivb2-i7-3770 total:240 pass:209 dwarn:0 dfail:0 fail:0 skip:31 ro-skl3-i5-6260u total:240 pass:223 dwarn:0 dfail:0 fail:3 skip:14
Results at /archive/results/CI_IGT_test/RO_Patchwork_1843/
4a26251 drm-intel-nightly: 2016y-08m-11d-16h-12m-42s UTC integration manifest 3d6ab56 drm/i915: intel_dp_link_is_valid() should only return status of link
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx