Skip to contentSkip to conversation

Documentation: devicetree: Fix max77693 spelling errors

PATCH Applied Sebastiaan Schalbroeck 3 participants 3 messages Aug 22, 2016 – Aug 30, 2016

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Documentation: devicetree: Fix max77693 spelling errors

This patch corrects spelling errors in the max77693 devicetree doc, in particular example code containing typos.

---
 Documentation/devicetree/bindings/mfd/max77693.txt | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
Documentation/devicetree/bindings/mfd/max77693.txt +6 -6
index d342584..6a1ae3a 100644
@@ -17,28 +17,28 @@ Required properties:
 - interrupt-parent :  The parent interrupt controller.
 
 Optional properties:
-- regulators : The regulators of max77693 have to be instantiated under subnod
+- regulators : The regulators of max77693 have to be instantiated under subnode
   named "regulators" using the following format.
 
 	regulators {
-		regualtor-compatible = ESAFEOUT1/ESAFEOUT2/CHARGER
-		standard regulator constratints[*].
+		regulator-compatible = ESAFEOUT1/ESAFEOUT2/CHARGER
+		standard regulator constraints[*].
 	};
 
 	[*] refer Documentation/devicetree/bindings/regulator/regulator.txt
 
 - haptic : The MAX77693 haptic device utilises a PWM controlled motor to provide
   users with tactile feedback. PWM period and duty-cycle are varied in
-  order to provide the approprite level of feedback.
+  order to provide the appropriate level of feedback.
 
  Required properties:
-	- compatible : Must be "maxim,max77693-hpatic"
+	- compatible : Must be "maxim,max77693-haptic"
 	- haptic-supply : power supply for the haptic motor
 	[*] refer Documentation/devicetree/bindings/regulator/regulator.txt
 	- pwms : phandle to the physical PWM(Pulse Width Modulation) device.
 	 PWM properties should be named "pwms". And number of cell is different
 	 for each pwm device.
-	 To get more informations, please refer to documentaion.
+	 To get more information, please refer to documentation.
 	[*] refer Documentation/devicetree/bindings/pwm/pwm.txt
 
 - charger : Node configuring the charger driver.
Signature · 6 lines
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Reviewed-by on v1 1/1
#1 lore raw

Hi,

Quoted 38 lines · Sebastiaan Schalbroeck

This patch corrects spelling errors in the max77693 devicetree doc, in particular example code containing typos.

---
 Documentation/devicetree/bindings/mfd/max77693.txt | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
Documentation/devicetree/bindings/mfd/max77693.txt +5 -5
index d342584..6a1ae3a 100644
@@ -17,28 +17,28 @@ Required properties:
 - interrupt-parent :  The parent interrupt controller.
 
 Optional properties:
-- regulators : The regulators of max77693 have to be instantiated under subnod
+- regulators : The regulators of max77693 have to be instantiated under subnode
   named "regulators" using the following format.
 
 	regulators {
-		regualtor-compatible = ESAFEOUT1/ESAFEOUT2/CHARGER
-		standard regulator constratints[*].
+		regulator-compatible = ESAFEOUT1/ESAFEOUT2/CHARGER
+		standard regulator constraints[*].
 	};
 
 	[*] refer Documentation/devicetree/bindings/regulator/regulator.txt
 
 - haptic : The MAX77693 haptic device utilises a PWM controlled motor to provide
   users with tactile feedback. PWM period and duty-cycle are varied in
-  order to provide the approprite level of feedback.
+  order to provide the appropriate level of feedback.
 
  Required properties:
-	- compatible : Must be "maxim,max77693-hpatic"
+	- compatible : Must be "maxim,max77693-haptic"

Documentation/devicetree/bindings/mfd/max77693.txt Required properties: · line 44

Quoted 10 lines
Documentation/devicetree/bindings/mfd/max77693.txt +1 -1
 	- haptic-supply : power supply for the haptic motor
 	[*] refer Documentation/devicetree/bindings/regulator/regulator.txt
 	- pwms : phandle to the physical PWM(Pulse Width Modulation) device.
 	 PWM properties should be named "pwms". And number of cell is different
 	 for each pwm device.
-	 To get more informations, please refer to documentaion.
+	 To get more information, please refer to documentation.
 	[*] refer Documentation/devicetree/bindings/pwm/pwm.txt
 
 - charger : Node configuring the charger driver.

Thanks for your fixup.

Regards,
Chanwoo Choi

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html