Skip to contentSkip to conversation

dmaengine: mv_xor: Add support for IO (PCIe) src/dst areas

PATCH New Stefan Roese 4 participants 7 messages Aug 17, 2016 – Aug 30, 2016 dmaengine

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 dmaengine: mv_xor: Add support for IO (PCIe) src/dst areas

To enable the access to a specific area, the MVEBU XOR controllers needs to have this area enabled / mapped via an address window. Right now, only the DRAM memory area is enabled via such memory windows. So using this driver to DMA to / from a e.g. PCIe memory region is currently not supported.

This patch now adds support for such PCIe / IO regions by checking if the src / dst address is located in an IO memory area in contrast to being located in DRAM. This is done by using the newly introduced MBus function mvebu_mbus_get_io_win_info(). If the src / dst address is located in such an IO area, a new address window is created in the XOR DMA controller. Enabling the controller to access this area.

Cc Gregory CLEMENT <[email protected]>
Cc Thomas Petazzoni <[email protected]>
Cc Marcin Wojtas <[email protected]>
Cc Arnd Bergmann <[email protected]>
Cc Vinod Koul <[email protected]>

---
RFC -> v1:
- Use a cache for the already mapped areas for performance reasons, as the MMIO registers don't need to get queried any more if the area is already mapped now

 drivers/dma/mv_xor.c | 91 +++++++++++++++++++++++++++++++++++++++++++++++++++-
 drivers/dma/mv_xor.h |  7 ++++
 2 files changed, 97 insertions(+), 1 deletion(-)
drivers/dma/mv_xor.c +90 -1
index f4c9f98..0162750 100644
@@ -470,12 +470,86 @@ static int mv_xor_alloc_chan_resources(struct dma_chan *chan)
 	return mv_chan->slots_allocated ? : -ENOMEM;
 }
 
+/*
+ * Check if source or destination is an PCIe/IO address (non-SDRAM) and add
+ * a new MBus window if necessary. Use a cache for these check so that
+ * the MMIO mapped registers don't have to be accessed for this check
+ * to speed up this process.
+ */
+static int mv_xor_add_io_win(struct mv_xor_chan *mv_chan, u32 addr)
+{
+	struct mv_xor_device *xordev = mv_chan->xordev;
+	void __iomem *base = mv_chan->mmr_high_base;
+	u32 win_enable;
+	u32 size;
+	u8 target, attr;
+	int ret;
+	int i;
+
+	/*
+	 * Loop over the cached windows to check, if the requested area
+	 * is already mapped. If this the case, nothing needs to be done
+	 * and we can return.
+	 */
+	for (i = 0; i < WINDOW_COUNT; i++) {
+		if (addr >= xordev->win_start[i] &&
+		    addr <= xordev->win_end[i]) {
+			/* Window is already mapped */
+			return 0;
+		}
+	}
+
+	/*
+	 * The window is not mapped, so we need to create the new mapping
+	 */
+
+	/* If no IO window is found that addr has to be located in SDRAM */
+	ret = mvebu_mbus_get_io_win_info(addr, &size, &target, &attr);
+	if (ret < 0)
+		return 0;
+
+	/*
+	 * Mask the base addr 'addr' according to 'size' read back from the
+	 * MBus window. Otherwise we might end up with an address located
+	 * somewhere in the middle of this area here.
+	 */
+	size -= 1;
+	addr &= ~size;
+
+	/*
+	 * Reading one of both enabled register is enough, as they are always
+	 * programmed to the identical values
+	 */
+	win_enable = readl(base + WINDOW_BAR_ENABLE(0));
+
+	/* Set 'i' to the first free window to write the new values to */
+	i = ffs(~win_enable) - 1;
+	if (i >= WINDOW_COUNT)
+		return -ENOMEM;
+
+	writel((addr & 0xffff0000) | (attr << 8) | target,
+	       base + WINDOW_BASE(i));
+	writel(size & 0xffff0000, base + WINDOW_SIZE(i));
+
+	/* Fill the caching variables for later use */
+	xordev->win_start[i] = addr;
+	xordev->win_end[i] = addr + size;
+
+	win_enable |= (1 << i);
+	win_enable |= 3 << (16 + (2 * i));
+	writel(win_enable, base + WINDOW_BAR_ENABLE(0));
+	writel(win_enable, base + WINDOW_BAR_ENABLE(1));
+
+	return 0;
+}
+
 static struct dma_async_tx_descriptor *
 mv_xor_prep_dma_xor(struct dma_chan *chan, dma_addr_t dest, dma_addr_t *src,
 		    unsigned int src_cnt, size_t len, unsigned long flags)
 {
 	struct mv_xor_chan *mv_chan = to_mv_xor_chan(chan);
 	struct mv_xor_desc_slot *sw_desc;
+	int ret;
 
 	if (unlikely(len < MV_XOR_MIN_BYTE_COUNT))
 		return NULL;
@@ -486,6 +560,11 @@ mv_xor_prep_dma_xor(struct dma_chan *chan, dma_addr_t dest, dma_addr_t *src,
 		"%s src_cnt: %d len: %zu dest %pad flags: %ld\n",
 		__func__, src_cnt, len, &dest, flags);
 
+	/* Check if a new window needs to get added for 'dest' */
+	ret = mv_xor_add_io_win(mv_chan, dest);
+	if (ret)
+		return NULL;
+
 	sw_desc = mv_chan_alloc_slot(mv_chan);
 	if (sw_desc) {
 		sw_desc->type = DMA_XOR;
@@ -493,8 +572,13 @@ mv_xor_prep_dma_xor(struct dma_chan *chan, dma_addr_t dest, dma_addr_t *src,
 		mv_desc_init(sw_desc, dest, len, flags);
 		if (mv_chan->op_in_desc == XOR_MODE_IN_DESC)
 			mv_desc_set_mode(sw_desc);
-		while (src_cnt--)
+		while (src_cnt--) {
+			/* Check if a new window needs to get added for 'src' */
+			ret = mv_xor_add_io_win(mv_chan, src[src_cnt]);
+			if (ret)
+				return NULL;
 			mv_desc_set_src_addr(sw_desc, src_cnt, src[src_cnt]);
+		}
 	}
 
 	dev_dbg(mv_chan_to_devp(mv_chan),
@@ -959,6 +1043,7 @@ mv_xor_channel_add(struct mv_xor_device *xordev,
 		mv_chan->op_in_desc = XOR_MODE_IN_DESC;
 
 	dma_dev = &mv_chan->dmadev;
+	mv_chan->xordev = xordev;
 
 	/*
 	 * These source and destination dummy buffers are used to implement
@@ -1086,6 +1171,10 @@ mv_xor_conf_mbus_windows(struct mv_xor_device *xordev,
 		       dram->mbus_dram_target_id, base + WINDOW_BASE(i));
 		writel((cs->size - 1) & 0xffff0000, base + WINDOW_SIZE(i));
 
+		/* Fill the caching variables for later use */
+		xordev->win_start[i] = cs->base;
+		xordev->win_end[i] = cs->base + cs->size - 1;
+
 		win_enable |= (1 << i);
 		win_enable |= 3 << (16 + (2 * i));
 	}
drivers/dma/mv_xor.h +7 -0
index bf56e08..88eeab2 100644
@@ -80,12 +80,17 @@
 #define WINDOW_BAR_ENABLE(chan)	(0x40 + ((chan) << 2))
 #define WINDOW_OVERRIDE_CTRL(chan)	(0xA0 + ((chan) << 2))
 
+#define WINDOW_COUNT		8
+
 struct mv_xor_device {
 	void __iomem	     *xor_base;
 	void __iomem	     *xor_high_base;
 	struct clk	     *clk;
 	struct mv_xor_chan   *channels[MV_XOR_MAX_CHANNELS];
 	int		     xor_type;
+
+	u32                  win_start[WINDOW_COUNT];
+	u32                  win_end[WINDOW_COUNT];
 };
 
 /**
@@ -127,6 +132,8 @@ struct mv_xor_chan {
 	char			dummy_dst[MV_XOR_MIN_BYTE_COUNT];
 	dma_addr_t		dummy_src_addr, dummy_dst_addr;
 	u32                     saved_config_reg, saved_int_mask_reg;
+
+	struct mv_xor_device	*xordev;
 };
 
 /**
Signature · 1 line
2.9.3
#1 lore raw
url: https://github.com/0day-ci/linux/commits/Stefan-Roese/dmaengine-mv_xor-Add-support-for-IO-PCIe-src-dst-areas/20160817-175632 config: xtensa-allyesconfig (attached as .config) compiler…

Hi Stefan,

[auto build test ERROR on linus/master]
[also build test ERROR on v4.8-rc3 next-20160823]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
[Suggest to use git(>=2.9.0) format-patch --base=<commit> (or --base=auto for convenience) to record what (public, well-known) commit your patch series was built on] [Check https://git-scm.com/docs/git-format-patch for more information]

url: https://github.com/0day-ci/linux/commits/Stefan-Roese/dmaengine-mv_xor-Add-support-for-IO-PCIe-src-dst-areas/20160817-175632
config: xtensa-allyesconfig (attached as .config)
compiler: xtensa-linux-gcc (GCC) 4.9.0
reproduce:
wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
make.cross ARCH=xtensa

All errors (new ones prefixed by >>):

drivers/built-in.o: In function `set_param_ifnum':

>> ipmi_poweroff.c:(.text+0x10157c): undefined reference to `mvebu_mbus_get_io_win_info'

drivers/built-in.o: In function `mv_xor_add_io_win':
mv_xor.c:(.text+0x11039e): undefined reference to `mvebu_mbus_get_io_win_info'
drivers/built-in.o: In function `mc13xxx_led_probe':
leds-mc13783.c:(.init.text+0x39a9c): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x15588) leds-mc13783.c:(.init.text+0x39b0c): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x155a8) leds-mc13783.c:(.init.text+0x39b28): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x155ac) leds-mc13783.c:(.init.text+0x39b46): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x155b0) leds-mc13783.c:(.init.text+0x39b5c): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x155b4) leds-mc13783.c:(.init.text+0x39b95): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x155b8) leds-mc13783.c:(.init.text+0x39b13): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x155fc) leds-mc13783.c:(.init.text+0x39b2f): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x15600) leds-mc13783.c:(.init.text+0x39b87): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x15604) leds-mc13783.c:(.init.text+0x39b9e): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x15608) leds-mc13783.c:(.init.text+0x39be0): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x1560c) drivers/built-in.o: In function `max77693_led_driver_init':
leds-max77693.c:(.init.text+0x39bfb): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x15610) leds-max77693.c:(.init.text+0x39c02): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x15614) drivers/built-in.o: In function `max8997_led_driver_init':
leds-max8997.c:(.init.text+0x39c0f): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x15618) leds-max8997.c:(.init.text+0x39c16): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x1561c) drivers/built-in.o: In function `lm355x_i2c_driver_init':
leds-lm355x.c:(.init.text+0x39c23): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x15620) leds-lm355x.c:(.init.text+0x39c2a): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x15624) drivers/built-in.o: In function `blinkm_driver_init':
leds-blinkm.c:(.init.text+0x39c37): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x15628) leds-blinkm.c:(.init.text+0x39c3e): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x1562c) drivers/built-in.o: In function `syscon_led_driver_init':
leds-syscon.c:(.init.text+0x39c4b): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x15630) leds-syscon.c:(.init.text+0x39c52): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x15634) drivers/built-in.o: In function `menf21bmc_led_init':
leds-menf21bmc.c:(.init.text+0x39c5f): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x15638) leds-menf21bmc.c:(.init.text+0x39c66): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x1563c) drivers/built-in.o: In function `ktd2692_driver_init':
leds-ktd2692.c:(.init.text+0x39c73): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x15640) leds-ktd2692.c:(.init.text+0x39c7a): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x15644) drivers/built-in.o: In function `is31fl32xx_driver_init':
leds-is31fl32xx.c:(.init.text+0x39c87): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x15648) leds-is31fl32xx.c:(.init.text+0x39c8e): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x1564c) drivers/built-in.o: In function `dac124s085_driver_init':
leds-dac124s085.c:(.init.text+0x39c9b): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x15650) leds-dac124s085.c:(.init.text+0x39ca2): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x15654) drivers/built-in.o: In function `timer_trig_init':
ledtrig-timer.c:(.init.text+0x39caf): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x15658) ledtrig-timer.c:(.init.text+0x39cb4): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x1565c) drivers/built-in.o: In function `oneshot_trig_init':
ledtrig-oneshot.c:(.init.text+0x39cc3): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x15660) ledtrig-oneshot.c:(.init.text+0x39cc8): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x15664) drivers/built-in.o: In function `ledtrig_disk_init':
ledtrig-disk.c:(.init.text+0x39cd7): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x15668) ledtrig-disk.c:(.init.text+0x39cda): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x1566c) ledtrig-disk.c:(.init.text+0x39ce5): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x15670) ledtrig-disk.c:(.init.text+0x39ce8): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x15674) ledtrig-disk.c:(.init.text+0x39cdf): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x15678) ledtrig-disk.c:(.init.text+0x39cee): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x1567c) drivers/built-in.o: In function `ledtrig_mtd_init':
ledtrig-mtd.c:(.init.text+0x39cfb): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x15680) ledtrig-mtd.c:(.init.text+0x39cfe): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x15684) ledtrig-mtd.c:(.init.text+0x39d09): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x15688) ledtrig-mtd.c:(.init.text+0x39d0c): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x1568c) ledtrig-mtd.c:(.init.text+0x39d03): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x15690) ledtrig-mtd.c:(.init.text+0x39d12): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x15694) drivers/built-in.o: In function `heartbeat_trig_init':
ledtrig-heartbeat.c:(.init.text+0x39d1f): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x15698) ledtrig-heartbeat.c:(.init.text+0x39d30): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x1569c) ledtrig-heartbeat.c:(.init.text+0x39d33): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x156a0) ledtrig-heartbeat.c:(.init.text+0x39d3c): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x156a4) ledtrig-heartbeat.c:(.init.text+0x39d24): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x156a8) ledtrig-heartbeat.c:(.init.text+0x39d36): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x156ac) ledtrig-heartbeat.c:(.init.text+0x39d3f): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x156b0) drivers/built-in.o: In function `bl_trig_init':
ledtrig-backlight.c:(.init.text+0x39d4b): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x156b4) ledtrig-backlight.c:(.init.text+0x39d50): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x156b8) drivers/built-in.o: In function `gpio_trig_init':
ledtrig-gpio.c:(.init.text+0x39d5f): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x156bc) ledtrig-gpio.c:(.init.text+0x39d64): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x156c0) drivers/built-in.o: In function `ledtrig_cpu_init':
ledtrig-cpu.c:(.init.text+0x39d73): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x156c4) ledtrig-cpu.c:(.init.text+0x39d76): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x156c8) ledtrig-cpu.c:(.init.text+0x39d89): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x156cc) ledtrig-cpu.c:(.init.text+0x39d94): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x156d0) ledtrig-cpu.c:(.init.text+0x39d9d): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x156d4) ledtrig-cpu.c:(.init.text+0x39da0): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x156d8) ledtrig-cpu.c:(.init.text+0x39da3): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x156dc) ledtrig-cpu.c:(.init.text+0x39db8): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x156e0) ledtrig-cpu.c:(.init.text+0x39dc1): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x156e4) ledtrig-cpu.c:(.init.text+0x39d83): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x156e8) ledtrig-cpu.c:(.init.text+0x39d8e): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x156ec) ledtrig-cpu.c:(.init.text+0x39d97): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x156f0) ledtrig-cpu.c:(.init.text+0x39dac): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x156f4) ledtrig-cpu.c:(.init.text+0x39dbb): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x156f8) ledtrig-cpu.c:(.init.text+0x39dc6): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x156fc) drivers/built-in.o: In function `defon_trig_init':
ledtrig-default-on.c:(.init.text+0x39dd3): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x15700) ledtrig-default-on.c:(.init.text+0x39dd8): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x15704) drivers/built-in.o: In function `transient_trig_init':
ledtrig-transient.c:(.init.text+0x39de7): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x15708) ledtrig-transient.c:(.init.text+0x39dec): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x1570c) drivers/built-in.o: In function `ledtrig_camera_init':
ledtrig-camera.c:(.init.text+0x39dfb): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x15710) ledtrig-camera.c:(.init.text+0x39dfe): dangerous relocation: l32r: literal target out of range (try using text-section-literals): (.init.literal+0x15714)

---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
-------------- next part --------------
A non-text attachment was scrubbed...
Name: .config.gz
Type: application/octet-stream
Size: 46046 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160824/5ff04d53/attachment-0001.obj>

#2 lore raw

PATCH 1/1 dmaengine: mv_xor: Add support for IO (PCIe) src/dst areas

Quoted 17 lines · kbuild test robot

Hi Stefan,

[auto build test ERROR on linus/master]
[also build test ERROR on v4.8-rc3 next-20160823]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
[Suggest to use git(>=2.9.0) format-patch --base=<commit> (or --base=auto for convenience) to record what (public, well-known) commit your patch series was built on] [Check https://git-scm.com/docs/git-format-patch for more information]

url: https://github.com/0day-ci/linux/commits/Stefan-Roese/dmaengine-mv_xor-Add-support-for-IO-PCIe-src-dst-areas/20160817-175632
config: xtensa-allyesconfig (attached as .config)
compiler: xtensa-linux-gcc (GCC) 4.9.0
reproduce:
wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
make.cross ARCH=xtensa

Quoted 6 lines

All errors (new ones prefixed by >>):

drivers/built-in.o: In function `set_param_ifnum':

Quoted 1 line
Quoted 1 line

ipmi_poweroff.c:(.text+0x10157c): undefined reference to `mvebu_mbus_get_io_win_info'

drivers/built-in.o: In function `mv_xor_add_io_win':

   mv_xor.c:(.text+0x11039e): undefined reference to `mvebu_mbus_get_io_win_info'

Does it really make sense to compile this driver for all archs? Or should I send a v2 of this patch that removes COMPILE_TEST for this driver from Kconfig so that its only compiled for the target platforms?

Thanks,
Stefan

#3 lore raw

PATCH 1/1 dmaengine: mv_xor: Add support for IO (PCIe) src/dst areas

Hello,

Quoted 11 lines · Stefan Roese
Quoted 6 lines

All errors (new ones prefixed by >>):

drivers/built-in.o: In function `set_param_ifnum':

Quoted 1 line
Quoted 1 line

ipmi_poweroff.c:(.text+0x10157c): undefined reference to `mvebu_mbus_get_io_win_info'

drivers/built-in.o: In function `mv_xor_add_io_win':

   mv_xor.c:(.text+0x11039e): undefined reference to `mvebu_mbus_get_io_win_info'  

Does it really make sense to compile this driver for all archs? Or should I send a v2 of this patch that removes COMPILE_TEST for this driver from Kconfig so that its only compiled for the target platforms?

I'm not sure what's the exact policy, but I believe kernel maintainers like when the compilation coverage is as wide as possible. The MBus driver could provide some stub functions when not enabled? I don't know if it's worth it, since indeed mv_xor is only ever going to be used on ARM.

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
#4 lore raw

PATCH 1/1 dmaengine: mv_xor: Add support for IO (PCIe) src/dst areas

Hi Thomas,

Quoted 14 lines · Thomas Petazzoni
Quoted 11 lines · Stefan Roese
Quoted 6 lines

All errors (new ones prefixed by >>):

drivers/built-in.o: In function `set_param_ifnum':

Quoted 1 line
Quoted 1 line

ipmi_poweroff.c:(.text+0x10157c): undefined reference to `mvebu_mbus_get_io_win_info'

drivers/built-in.o: In function `mv_xor_add_io_win':

   mv_xor.c:(.text+0x11039e): undefined reference to `mvebu_mbus_get_io_win_info'

Does it really make sense to compile this driver for all archs? Or should I send a v2 of this patch that removes COMPILE_TEST for this driver from Kconfig so that its only compiled for the target platforms?

Quoted 5 lines

I'm not sure what's the exact policy, but I believe kernel maintainers like when the compilation coverage is as wide as possible. The MBus driver could provide some stub functions when not enabled? I don't know if it's worth it, since indeed mv_xor is only ever going to be used on ARM.

As you've probably already noticed, v2 of this patch with COMPILE_TEST removed also did run into this linking problem - for ARM64 in this case. So its perhaps best to provide this MBus driver stub function. COMPILE_TEST could then be enabled again.

What do you think? Should I post a separate patch to the MBus driver (also attached)? Or should I squash it into v3 of this XOR DMA driver patch (with COMPILE_TEST added gain)?

Thanks,
Stefan
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0001-bus-mvebu-mbus-Provide-stub-function-for-mvebu_mbus_.patch
Type: text/x-diff
Size: 1834 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160829/7bb3708b/attachment.bin>

#5 lore raw

PATCH 1/1 dmaengine: mv_xor: Add support for IO (PCIe) src/dst areas

Hello,

Quoted 4 lines · Stefan Roese

As you've probably already noticed, v2 of this patch with COMPILE_TEST removed also did run into this linking problem - for ARM64 in this case. So its perhaps best to provide this MBus driver stub function. COMPILE_TEST could then be enabled again.

Yes, I noticed.

Quoted 3 lines

What do you think? Should I post a separate patch to the MBus driver (also attached)? Or should I squash it into v3 of this XOR DMA driver patch (with COMPILE_TEST added gain)?

Submitting as a separate patch is better IMO, it's touching a separate driver. Just submit both in the same patch series, the kbuild test robot will then only test building the XOR change with the MBus change applied.

Thanks a lot!

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
#6 lore raw

PATCH 1/1 dmaengine: mv_xor: Add support for IO (PCIe) src/dst areas

In reply to Stefan Roese
Quoted 21 lines · Stefan Roese
Quoted 20 lines · kbuild test robot

Hi Stefan,

[auto build test ERROR on linus/master]
[also build test ERROR on v4.8-rc3 next-20160823]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
[Suggest to use git(>=2.9.0) format-patch --base=<commit> (or --base=auto for convenience) to record what (public, well-known) commit your patch series was built on] [Check https://git-scm.com/docs/git-format-patch for more information]

url: https://github.com/0day-ci/linux/commits/Stefan-Roese/dmaengine-mv_xor-Add-support-for-IO-PCIe-src-dst-areas/20160817-175632
config: xtensa-allyesconfig (attached as .config)
compiler: xtensa-linux-gcc (GCC) 4.9.0
reproduce:
wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
make.cross ARCH=xtensa

All errors (new ones prefixed by >>):

drivers/built-in.o: In function `set_param_ifnum':

Quoted 8 lines
Quoted 3 lines
Quoted 1 line
Quoted 1 line

ipmi_poweroff.c:(.text+0x10157c): undefined reference to `mvebu_mbus_get_io_win_info'

drivers/built-in.o: In function `mv_xor_add_io_win':

   mv_xor.c:(.text+0x11039e): undefined reference to `mvebu_mbus_get_io_win_info'

Does it really make sense to compile this driver for all archs? Or should I send a v2 of this patch that removes COMPILE_TEST for this driver from Kconfig so that its only compiled for the target platforms?

Compile test is helpful :)

If it is reasonable possible, that I would urge you to keep it.

Signature · 1 line
~Vinod