ARM: dts: imx6qdl: Fix SPDIF regression
Subsystems (3)
PATCH 1/1 ARM: dts: imx6qdl: Fix SPDIF regression
Commit 833f2cbf7091 ("ARM: dts: imx6: change the core clock of spdif") changed many more clocks than only the SPDIF core clock as stated in the commit message.
The MLB clock has been added and this causes SPDIF regression as reported by Xavi Drudis Ferran and also in this forum post:
https://forum.digikey.com/thread/34240
The MX6Q Reference Manual does not mention that MLB is a clock related to SPDIF, so change it back to a dummy clock to restore SPDIF functionality.
Thanks to Ambika for providing the fix at:
https://community.nxp.com/thread/387131
--- arch/arm/boot/dts/imx6qdl.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/imx6qdl.dtsi +1 -1
@@ -243,7 +243,7 @@ clocks = <&clks IMX6QDL_CLK_SPDIF_GCLK>, <&clks IMX6QDL_CLK_OSC>, <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_ASRC>, <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_ESAI_EXTAL>, - <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_MLB>, + <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_SPBA>; clock-names = "core", "rxtx0", "rxtx1", "rxtx2",
Signature · 1 line
1.9.1
PATCH 1/1 ARM: dts: imx6qdl: Fix SPDIF regression
El Wed, Aug 31, 2016 at 10:56:48AM -0300, Fabio Estevam deia:
Quoted 39 lines
Commit
833f2cbf7091("ARM: dts: imx6: change the core clock of spdif") changed many more clocks than only the SPDIF core clock as stated in the commit message.The MLB clock has been added and this causes SPDIF regression as reported by Xavi Drudis Ferran and also in this forum post:
https://forum.digikey.com/thread/34240The MX6Q Reference Manual does not mention that MLB is a clock related to SPDIF, so change it back to a dummy clock to restore SPDIF functionality.
Thanks to Ambika for providing the fix at:
https://community.nxp.com/thread/387131Fixes 833f2cbf7091 ("ARM: dts: imx6: change the core clock of spdif")Cc <[email protected]> # 4.4.xReported-by Xavi Drudis Ferran <[email protected]>Signed-off-by Fabio Estevam <[email protected]>--- arch/arm/boot/dts/imx6qdl.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/arm/boot/dts/imx6qdl.dtsi +1
-1@@ -243,7 +243,7 @@ clocks = <&clks IMX6QDL_CLK_SPDIF_GCLK>, <&clks IMX6QDL_CLK_OSC>, <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_ASRC>, <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_ESAI_EXTAL>, - <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_MLB>, + <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_SPBA>; clock-names = "core", "rxtx0", "rxtx1", "rxtx2",Signature · 1 line
1.9.1
(on linux-libre-4.7, wandboard-quad-rev-b1, imx6q MCIMX6Q5EYM10AC ,according to wandboard manual BOM) Before the change I didn't hear output on spdif, after the change output sounds ok.
Shawn Guo
AppliedPATCH 1/1 ARM: dts: imx6qdl: Fix SPDIF regression
In reply to Fabio EstevamQuoted 12 lines · Fabio Estevam
Commit
833f2cbf7091("ARM: dts: imx6: change the core clock of spdif") changed many more clocks than only the SPDIF core clock as stated in the commit message.The MLB clock has been added and this causes SPDIF regression as reported by Xavi Drudis Ferran and also in this forum post:
https://forum.digikey.com/thread/34240The MX6Q Reference Manual does not mention that MLB is a clock related to SPDIF, so change it back to a dummy clock to restore SPDIF functionality.
Quoted 7 lines
Thanks to Ambika for providing the fix at:
https://community.nxp.com/thread/387131Fixes 833f2cbf7091 ("ARM: dts: imx6: change the core clock of spdif")Cc <[email protected]> # 4.4.xReported-by Xavi Drudis Ferran <[email protected]>Signed-off-by Fabio Estevam <[email protected]>
Applied, thanks.