A few typo fixes in the manpages
PATCH 4/4 A few typo fixes in the manpages
They have been detected by lintian, the Debian package checker
Signed-off-by Ana Guerrero López <[email protected]>
--- doc/rst/iblinkinfo.8.in.rst | 4 ++-- doc/rst/ibqueryerrors.8.in.rst | 2 +- doc/rst/infiniband-diags.8.in.rst | 4 ++-- doc/rst/rdma-ndd.8.in.rst | 4 ++-- 4 files changed, 7 insertions(+), 7 deletions(-)
doc/rst/iblinkinfo.8.in.rst +2 -2
@@ -57,7 +57,7 @@ The node to start a partial scan can be specified with the following addresses. **--switch, -S <port_guid>** same as "-G". (provided only for backward compatibility) -How much of the scan to be printed can be controled with the following. +How much of the scan to be printed can be controlled with the following. **--all, -a** Print all nodes found in a partial fabric scan. Normally a
@@ -81,7 +81,7 @@ Filter downports indicated in a ibnetdiscover cache. If a port was previously indicated as down in the specified cache, and is still down, do not output it in the resulting output. This option may be particularly useful for environments where switches are not fully populated, thus much of the default iblinkinfo -info is considered unuseful. See **ibnetdiscover** for information on caching +info is considered useless. See **ibnetdiscover** for information on caching ibnetdiscover output.
doc/rst/ibqueryerrors.8.in.rst +1 -1
@@ -63,7 +63,7 @@ using a QoS aware routing engine as it can cause a credit deadlock. **CAUTION** clearing data or error counters will occur regardless of if they are printed or not. See **--counters** and **--data** for details on -controling which counters are printed. +controlling which counters are printed. **--details** include receive error and transmit discard details
doc/rst/infiniband-diags.8.in.rst +2 -2
@@ -120,8 +120,8 @@ Switch Forwarding Table info See: ibtracert, ibroute, dump_lfts, dump_mfts, check_lft_balance, ibfindnodesusing -Peformance counters -------------------- +Performance counters +-------------------- See: ibqueryerrors, perfquery
doc/rst/rdma-ndd.8.in.rst +2 -2
@@ -27,7 +27,7 @@ those changes. DETAILS ======= -Full operation of this deamon requires kernels which support polling of the +Full operation of this daemon requires kernels which support polling of the procfs hostname file as well as libudev. If your system does not support either of these features, the daemon will set
@@ -37,7 +37,7 @@ the Node Descriptions at start up and then sleep forever. Node Description format ----------------------- -The deamon uses the nd_format configuration option within the ibdiags.conf +The daemon uses the nd_format configuration option within the ibdiags.conf file. %h and %d can be used as wildcards in that string to specify the dynamic use of <hostname> and <device> respectively.
Signature · 6 lines
2.9.3 -- To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): [email protected]
ira.weiny
AppliedQuoted 3 lines · Ana Guerrero López
They have been detected by lintian, the Debian package checker
Signed-off-by Ana Guerrero López <[email protected]>
Thanks Applied,
Ira
Quoted 86 lines
--- doc/rst/iblinkinfo.8.in.rst | 4 ++-- doc/rst/ibqueryerrors.8.in.rst | 2 +- doc/rst/infiniband-diags.8.in.rst | 4 ++-- doc/rst/rdma-ndd.8.in.rst | 4 ++-- 4 files changed, 7 insertions(+), 7 deletions(-)doc/rst/iblinkinfo.8.in.rst +2
-2@@ -57,7 +57,7 @@ The node to start a partial scan can be specified with the following addresses. **--switch, -S <port_guid>** same as "-G". (provided only for backward compatibility) -How much of the scan to be printed can be controled with the following. +How much of the scan to be printed can be controlled with the following. **--all, -a** Print all nodes found in a partial fabric scan. Normally a@@ -81,7 +81,7 @@ Filter downports indicated in a ibnetdiscover cache. If a port was previously indicated as down in the specified cache, and is still down, do not output it in the resulting output. This option may be particularly useful for environments where switches are not fully populated, thus much of the default iblinkinfo -info is considered unuseful. See **ibnetdiscover** for information on caching +info is considered useless. See **ibnetdiscover** for information on caching ibnetdiscover output.doc/rst/ibqueryerrors.8.in.rst +1
-1@@ -63,7 +63,7 @@ using a QoS aware routing engine as it can cause a credit deadlock. **CAUTION** clearing data or error counters will occur regardless of if they are printed or not. See **--counters** and **--data** for details on -controling which counters are printed. +controlling which counters are printed. **--details** include receive error and transmit discard detailsdoc/rst/infiniband-diags.8.in.rst +2
-2@@ -120,8 +120,8 @@ Switch Forwarding Table info See: ibtracert, ibroute, dump_lfts, dump_mfts, check_lft_balance, ibfindnodesusing -Peformance counters -------------------- +Performance counters +-------------------- See: ibqueryerrors, perfquerydoc/rst/rdma-ndd.8.in.rst +2
-2@@ -27,7 +27,7 @@ those changes. DETAILS ======= -Full operation of this deamon requires kernels which support polling of the +Full operation of this daemon requires kernels which support polling of the procfs hostname file as well as libudev. If your system does not support either of these features, the daemon will set@@ -37,7 +37,7 @@ the Node Descriptions at start up and then sleep forever. Node Description format ----------------------- -The deamon uses the nd_format configuration option within the ibdiags.conf +The daemon uses the nd_format configuration option within the ibdiags.conf file. %h and %d can be used as wildcards in that string to specify the dynamic use of <hostname> and <device> respectively.Signature · 6 lines
2.9.3 -- To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html