drm/i915: DP branch devices
Subsystems (3)
v9 cover drm/i915: DP branch devices
Prep work for DP branch device handling
This series of patches reads DPCD register 0x80h for receiver capabilities for DP branch devices. The branch device types are converters for the following standards
- DP to VGA
- DP to DVI
- DP to HDMI
- DP++ dual mode
- Wireless WiGig
DPCD register defines max pixel rate for VGA dongles. This check is carried out during mode validation.
[1] git://github.com/mkahola/drm-intel-mika.git dp_branch_device
v2: DPCD register read outs moved to drm (Ville, Daniel)
v3: Max pixel rate computation moved to drm (Daniel)
v4: Use of drm_dp_helper routines to collect data (Ville)
v5: Remove duplicate code and unnecessary functions from drm_dp_helper (Ville)
v6: Rebase and i915_debugfs cleanup
v7: Structure cleanups and initial step to move DP debugging info to drm_dp_helpers
v8: Cleanups and TMDS clock frequency check for HDMI adapter
v9: Indentation fixes (Jim Bride)
Mika Kahola (12):
drm: Add missing DP downstream port types
drm: Drop VGA from bpc definitions
drm: Helper to read max clock rate
drm: Helper to read max bits per component
drm: Read DP branch device id
drm/i915: Cleanup DisplayPort AUX channel initialization drm/i915: Read DP branch device HW revision drm/i915: Read DP branch device SW revision drm/i915: Check pixel rate for DP to VGA dongle drm/i915: Update bits per component for display info
drm: Add DP branch device info on debugfs drm/i915: Check TMDS clock DP to HDMI dongle
drivers/gpu/drm/drm_dp_helper.c | 172 ++++++++++++++++++++++++++++++++++++ drivers/gpu/drm/i915/i915_debugfs.c | 3 + drivers/gpu/drm/i915/intel_dp.c | 88 +++++++++++++++++- drivers/gpu/drm/i915/intel_drv.h | 3 + drivers/gpu/drm/i915/intel_hdmi.c | 27 ++++++ include/drm/drm_dp_helper.h | 22 +++-- 6 files changed, 306 insertions(+), 9 deletions(-)
Signature · 6 lines
2.7.4 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v9 1/12 drm: Add missing DP downstream port types
Add missing DisplayPort downstream port types. The introduced new port types are DP++ and Wireless.
--- include/drm/drm_dp_helper.h | 2 ++ 1 file changed, 2 insertions(+)
include/drm/drm_dp_helper.h +2 -0
@@ -211,6 +211,8 @@# define DP_DS_PORT_TYPE_DVI 2# define DP_DS_PORT_TYPE_HDMI 3# define DP_DS_PORT_TYPE_NON_EDID 4 +# define DP_DS_PORT_TYPE_DP_DUALMODE 5 +# define DP_DS_PORT_TYPE_WIRELESS 6# define DP_DS_PORT_HPD (1 << 3)/* offset 1 for VGA is maximum megapixels per second / 8 */ /* offset 2 */
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v9 2/12 drm: Drop VGA from bpc definitions
In reply to Mika KaholaDrop "VGA" from bits per component definitions as these are also used by other standards such as DVI, HDMI, DP++.
--- include/drm/drm_dp_helper.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
include/drm/drm_dp_helper.h +5 -5
@@ -216,11 +216,11 @@# define DP_DS_PORT_HPD (1 << 3)/* offset 1 for VGA is maximum megapixels per second / 8 */ /* offset 2 */ -# define DP_DS_VGA_MAX_BPC_MASK (3 << 0) -# define DP_DS_VGA_8BPC 0 -# define DP_DS_VGA_10BPC 1 -# define DP_DS_VGA_12BPC 2 -# define DP_DS_VGA_16BPC 3 +# define DP_DS_MAX_BPC_MASK (3 << 0) +# define DP_DS_8BPC 0 +# define DP_DS_10BPC 1 +# define DP_DS_12BPC 2 +# define DP_DS_16BPC 3/* link configuration */ #define DP_LINK_BW_SET 0x100
Signature · 6 lines
2.7.4 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v9 3/12 drm: Helper to read max clock rate
In reply to Mika KaholaHelper routine to read out maximum supported pixel rate for DisplayPort legay VGA converter or TMDS clock rate for other digital legacy converters. The helper returns clock rate in kHz.
v2: Return early if detailed port cap info is not available.
Replace if-else ladder with switch-case (Ville)
--- drivers/gpu/drm/drm_dp_helper.c | 33 +++++++++++++++++++++++++++++++++ include/drm/drm_dp_helper.h | 2 ++ 2 files changed, 35 insertions(+)
drivers/gpu/drm/drm_dp_helper.c +33 -0
@@ -439,6 +439,39 @@ int drm_dp_link_configure(struct drm_dp_aux *aux, struct drm_dp_link *link) }EXPORT_SYMBOL (drm_dp_link_configure); +/** +* drm_dp_downstream_max_clock() - extract branch device max +* pixel rate for legacy VGA +* converter or max TMDS clock +* rate for others +* @dpcd: DisplayPort configuration data +* @port_cap: port capabilities +* +* Returns max clock in kHz on success or 0 if max clock not defined +*/ +int drm_dp_downstream_max_clock (const u8 dpcd[DP_RECEIVER_CAP_SIZE ], +const u8 port_cap[4 ]) +{ +int type = port_cap[0 ] &DP_DS_PORT_TYPE_MASK ; +bool detailed_cap_info = dpcd[DP_DOWNSTREAMPORT_PRESENT ] & +DP_DETAILED_CAP_INFO_AVAILABLE ; + +if (!detailed_cap_info) +return 0 ; + +switch (type) { +case DP_DS_PORT_TYPE_VGA : +return port_cap[1 ] *8 *1000 ; +case DP_DS_PORT_TYPE_DVI : +case DP_DS_PORT_TYPE_HDMI : +case DP_DS_PORT_TYPE_DP_DUALMODE : +return port_cap[1 ] *2500 ; +default : +return 0 ; + } +} +EXPORT_SYMBOL (drm_dp_downstream_max_clock); +/* * I2C-over-AUX implementation */
include/drm/drm_dp_helper.h +2 -0
@@ -815,6 +815,8 @@ int drm_dp_link_probe(struct drm_dp_aux *aux, struct drm_dp_link *link);int drm_dp_link_power_up (struct drm_dp_aux *aux,struct drm_dp_link *link);int drm_dp_link_power_down (struct drm_dp_aux *aux,struct drm_dp_link *link);int drm_dp_link_configure (struct drm_dp_aux *aux,struct drm_dp_link *link); +int drm_dp_downstream_max_clock (const u8 dpcd[DP_RECEIVER_CAP_SIZE ], +const u8 port_cap[4 ]);void drm_dp_aux_init (struct drm_dp_aux *aux);int drm_dp_aux_register (struct drm_dp_aux *aux);
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v9 4/12 drm: Helper to read max bits per component
In reply to Mika KaholaHelper routine to read out maximum supported bits per component for DisplayPort legay converters.
v2: Return early if detailed port cap info is not available.
Replace if-else ladder with switch-case (Ville)
--- drivers/gpu/drm/drm_dp_helper.c | 42 +++++++++++++++++++++++++++++++++++++++++ include/drm/drm_dp_helper.h | 2 ++ 2 files changed, 44 insertions(+)
drivers/gpu/drm/drm_dp_helper.c +42 -0
@@ -472,6 +472,48 @@ int drm_dp_downstream_max_clock(const u8 dpcd[DP_RECEIVER_CAP_SIZE], }EXPORT_SYMBOL (drm_dp_downstream_max_clock); +/** +* drm_dp_downstream_max_bpc() - extract branch device max +* bits per component +* @dpcd: DisplayPort configuration data +* @port_cap: port capabilities +* +* Returns max bpc on success or 0 if max bpc not defined +*/ +int drm_dp_downstream_max_bpc (const u8 dpcd[DP_RECEIVER_CAP_SIZE ], +const u8 port_cap[4 ]) +{ +int type = port_cap[0 ] &DP_DS_PORT_TYPE_MASK ; +bool detailed_cap_info = dpcd[DP_DOWNSTREAMPORT_PRESENT ] & +DP_DETAILED_CAP_INFO_AVAILABLE ; +int bpc; + +if (!detailed_cap_info) +return 0 ; + +switch (type) { +case DP_DS_PORT_TYPE_VGA : +case DP_DS_PORT_TYPE_DVI : +case DP_DS_PORT_TYPE_HDMI : +case DP_DS_PORT_TYPE_DP_DUALMODE : + bpc = port_cap[2 ] &DP_DS_MAX_BPC_MASK ; + +switch (bpc) { +case DP_DS_8BPC : +return 8 ; +case DP_DS_10BPC : +return 10 ; +case DP_DS_12BPC : +return 12 ; +case DP_DS_16BPC : +return 16 ; + } +default : +return 0 ; + } +} +EXPORT_SYMBOL (drm_dp_downstream_max_bpc); +/* * I2C-over-AUX implementation */
include/drm/drm_dp_helper.h +2 -0
@@ -817,6 +817,8 @@ int drm_dp_link_power_down(struct drm_dp_aux *aux, struct drm_dp_link *link);int drm_dp_link_configure (struct drm_dp_aux *aux,struct drm_dp_link *link);int drm_dp_downstream_max_clock (const u8 dpcd[DP_RECEIVER_CAP_SIZE ],const u8 port_cap[4 ]); +int drm_dp_downstream_max_bpc (const u8 dpcd[DP_RECEIVER_CAP_SIZE ], +const u8 port_cap[4 ]);void drm_dp_aux_init (struct drm_dp_aux *aux);int drm_dp_aux_register (struct drm_dp_aux *aux);
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v9 5/12 drm: Read DP branch device id
In reply to Mika KaholaRead DisplayPort branch device id string.
--- drivers/gpu/drm/drm_dp_helper.c | 12 ++++++++++++ include/drm/drm_dp_helper.h | 2 ++ 2 files changed, 14 insertions(+)
drivers/gpu/drm/drm_dp_helper.c +12 -0
@@ -514,6 +514,18 @@ int drm_dp_downstream_max_bpc(const u8 dpcd[DP_RECEIVER_CAP_SIZE], }EXPORT_SYMBOL (drm_dp_downstream_max_bpc); +/** +* drm_dp_downstream_id() - identify branch device +* @aux: DisplayPort AUX channel +* +* Returns branch device id on success or NULL on failure +*/ +int drm_dp_downstream_id (struct drm_dp_aux *aux,char id[6 ]) +{ +return drm_dp_dpcd_read (aux,DP_BRANCH_ID , id,6 ); +} +EXPORT_SYMBOL (drm_dp_downstream_id); +/* * I2C-over-AUX implementation */
include/drm/drm_dp_helper.h +2 -0
@@ -445,6 +445,7 @@#define DP_SOURCE_OUI 0x300#define DP_SINK_OUI 0x400#define DP_BRANCH_OUI 0x500 +#define DP_BRANCH_ID 0x503#define DP_SET_POWER 0x600# define DP_SET_POWER_D0 0x1
@@ -819,6 +820,7 @@ int drm_dp_downstream_max_clock(const u8 dpcd[DP_RECEIVER_CAP_SIZE], const u8 port_cap[4]);int drm_dp_downstream_max_bpc (const u8 dpcd[DP_RECEIVER_CAP_SIZE ],const u8 port_cap[4 ]); +int drm_dp_downstream_id (struct drm_dp_aux *aux,char id[6 ]);void drm_dp_aux_init (struct drm_dp_aux *aux);int drm_dp_aux_register (struct drm_dp_aux *aux);
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v9 6/12 drm/i915: Cleanup DisplayPort AUX channel initialization
In reply to Mika KaholaLet's remove reference to "struct intel_connector *connector" in intel_dp_aux_init() function as it is no longer required.
--- drivers/gpu/drm/i915/intel_dp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/intel_dp.c +2 -2
@@ -1243,7 +1243,7 @@ intel_dp_aux_fini(struct intel_dp *intel_dp) }static void -intel_dp_aux_init (struct intel_dp *intel_dp,struct intel_connector *connector) +intel_dp_aux_init (struct intel_dp *intel_dp) {struct intel_digital_port *intel_dig_port =dp_to_dig_port (intel_dp);enum port port = intel_dig_port->port;
@@ -5624,7 +5624,7 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port, connector->interlace_allowed = true; connector->doublescan_allowed =0 ; -intel_dp_aux_init (intel_dp, intel_connector); +intel_dp_aux_init (intel_dp);INIT_DELAYED_WORK (&intel_dp->panel_vdd_work, edp_panel_vdd_work);
Signature · 6 lines
2.7.4 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v9 7/12 drm/i915: Read DP branch device HW revision
In reply to Mika KaholaHW revision is mandatory field for DisplayPort branch devices. This is defined in DPCD register field 0x509.
v2: move drm_dp_ds_revision structure to be part of
drm_dp_link structure (Daniel)
v3: remove dependency to drm_dp_helper but instead parse
DPCD and print HW revision info to dmesg (Ville)
--- drivers/gpu/drm/i915/intel_dp.c | 21 +++++++++++++++++++++ include/drm/drm_dp_helper.h | 1 + 2 files changed, 22 insertions(+)
drivers/gpu/drm/i915/intel_dp.c +21 -0
@@ -1419,6 +1419,25 @@ static void intel_dp_print_rates(struct intel_dp *intel_dp)DRM_DEBUG_KMS ("common rates: %s\n" , str); } +static void intel_dp_print_hw_revision (struct intel_dp *intel_dp) +{ +uint8_t rev; +int len; + +if ((drm_debug &DRM_UT_KMS ) ==0 ) +return ; + +if (!(intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT ] & +DP_DWN_STRM_PORT_PRESENT )) +return ; + + len =drm_dp_dpcd_read (&intel_dp->aux,DP_BRANCH_HW_REV , &rev,1 ); +if (len <0 ) +return ; + +DRM_DEBUG_KMS ("sink hw revision: %d.%d\n" , (rev &0xf0 ) >>4 , rev &0xf ); +} +static int rate_to_index (int find,const int *rates) {int i =0 ;
@@ -4312,6 +4331,8 @@ intel_dp_long_pulse(struct intel_connector *intel_connector)intel_dp_probe_oui (intel_dp); +intel_dp_print_hw_revision (intel_dp); +intel_dp_configure_mst (intel_dp);if (intel_dp->is_mst) {
include/drm/drm_dp_helper.h +1 -0
@@ -446,6 +446,7 @@#define DP_SINK_OUI 0x400#define DP_BRANCH_OUI 0x500#define DP_BRANCH_ID 0x503 +#define DP_BRANCH_HW_REV 0x509#define DP_SET_POWER 0x600# define DP_SET_POWER_D0 0x1
Signature · 6 lines
2.7.4 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v9 8/12 drm/i915: Read DP branch device SW revision
In reply to Mika KaholaSW revision is mandatory field for DisplayPort branch devices. This is defined in DPCD register fields 0x50A and 0x50B.
v2: move drm_dp_ds_revision structure to be part of
drm_dp_link structure (Daniel)
v3: remove dependency to drm_dp_helper but instead parse
DPCD and print SW revision info to dmesg (Ville)
v4: commit message fix (Jim Bride)
--- drivers/gpu/drm/i915/intel_dp.c | 20 ++++++++++++++++++++ include/drm/drm_dp_helper.h | 1 + 2 files changed, 21 insertions(+)
drivers/gpu/drm/i915/intel_dp.c +20 -0
@@ -1438,6 +1438,25 @@ static void intel_dp_print_hw_revision(struct intel_dp *intel_dp)DRM_DEBUG_KMS ("sink hw revision: %d.%d\n" , (rev &0xf0 ) >>4 , rev &0xf ); } +static void intel_dp_print_sw_revision (struct intel_dp *intel_dp) +{ +uint8_t rev[2 ]; +int len; + +if ((drm_debug &DRM_UT_KMS ) ==0 ) +return ; + +if (!(intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT ] & +DP_DWN_STRM_PORT_PRESENT )) +return ; + + len =drm_dp_dpcd_read (&intel_dp->aux,DP_BRANCH_SW_REV , &rev,2 ); +if (len <0 ) +return ; + +DRM_DEBUG_KMS ("sink sw revision: %d.%d\n" , rev[0 ], rev[1 ]); +} +static int rate_to_index (int find,const int *rates) {int i =0 ;
@@ -4332,6 +4351,7 @@ intel_dp_long_pulse(struct intel_connector *intel_connector)intel_dp_probe_oui (intel_dp);intel_dp_print_hw_revision (intel_dp); +intel_dp_print_sw_revision (intel_dp);intel_dp_configure_mst (intel_dp);
include/drm/drm_dp_helper.h +1 -0
@@ -447,6 +447,7 @@#define DP_BRANCH_OUI 0x500#define DP_BRANCH_ID 0x503#define DP_BRANCH_HW_REV 0x509 +#define DP_BRANCH_SW_REV 0x50A#define DP_SET_POWER 0x600# define DP_SET_POWER_D0 0x1
Signature · 6 lines
2.7.4 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v9 08/12] drm/i915: Read DP branch device SW revision
Quoted 11 lines · Mika Kahola
SW revision is mandatory field for DisplayPort branch devices. This is defined in DPCD register fields
0x50Aand0x50B.v2: move
drm_dp_ds_revisionstructure to be part of
drm_dp_linkstructure (Daniel)
v3: remove dependency todrm_dp_helperbut instead parse
DPCD and print SW revision info to dmesg (Ville)
v4: commit message fix (Jim Bride)Signed-off-by Mika Kahola <[email protected]>
Quoted 57 lines
--- drivers/gpu/drm/i915/intel_dp.c | 20 ++++++++++++++++++++ include/drm/drm_dp_helper.h | 1 + 2 files changed, 21 insertions(+)drivers/gpu/drm/i915/intel_dp.c +20
-0@@ -1438,6 +1438,25 @@ static void intel_dp_print_hw_revision(struct intel_dp *intel_dp)DRM_DEBUG_KMS ("sink hw revision: %d.%d\n" , (rev &0xf0 ) >>4 , rev &0xf ); } +static void intel_dp_print_sw_revision (struct intel_dp *intel_dp) +{ +uint8_t rev[2 ]; +int len; + +if ((drm_debug &DRM_UT_KMS ) ==0 ) +return ; + +if (!(intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT ] & +DP_DWN_STRM_PORT_PRESENT )) +return ; + + len =drm_dp_dpcd_read (&intel_dp->aux,DP_BRANCH_SW_REV , &rev,2 ); +if (len <0 ) +return ; + +DRM_DEBUG_KMS ("sink sw revision: %d.%d\n" , rev[0 ], rev[1 ]); +} +static int rate_to_index (int find,const int *rates) {int i =0 ;@@ -4332,6 +4351,7 @@ intel_dp_long_pulse(struct intel_connector *intel_connector)intel_dp_probe_oui (intel_dp);intel_dp_print_hw_revision (intel_dp); +intel_dp_print_sw_revision (intel_dp);intel_dp_configure_mst (intel_dp);include/drm/drm_dp_helper.h +1
-0@@ -447,6 +447,7 @@#define DP_BRANCH_OUI 0x500#define DP_BRANCH_ID 0x503#define DP_BRANCH_HW_REV 0x509 +#define DP_BRANCH_SW_REV 0x50A#define DP_SET_POWER 0x600# define DP_SET_POWER_D0 0x1Signature · 1 line
2.7.4
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v9 9/12 drm/i915: Check pixel rate for DP to VGA dongle
In reply to Mika KaholaFilter out a mode that exceeds the max pixel rate setting for DP to VGA dongle. This is defined in DPCD register 0x81 if detailed cap info i.e. info field is 4 bytes long and it is available for DP downstream port.
The register defines the pixel rate divided by 8 in MP/s.
v2: DPCD read outs and computation moved to drm (Ville, Daniel)
v3: Sink pixel rate computation moved to drm_dp_max_sink_dotclock()
function (Daniel)
v4: Use of drm_dp_helper.c routines to compute max pixel clock (Ville)
v5: Use of intel_dp->downstream_ports to read out port capabilities.
Code restructuring (Ville)
v6: Move DP branch device check to drm_dp_helper.c (Daniel)
v7: Cleanup as suggested by Ville
--- drivers/gpu/drm/i915/intel_dp.c | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_dp.c +26 -1
@@ -190,6 +190,29 @@ intel_dp_max_data_rate(int max_link_clock, int max_lanes)return (max_link_clock * max_lanes *8 ) /10 ; } +static int +intel_dp_downstream_max_dotclock (struct intel_dp *intel_dp) +{ +struct intel_digital_port *intel_dig_port =dp_to_dig_port (intel_dp); +struct intel_encoder *encoder = &intel_dig_port->base; +struct drm_i915_private *dev_priv =to_i915 (encoder->base.dev); +int max_dotclk = dev_priv->max_dotclk_freq; +int ds_max_dotclk; + +int type = intel_dp->downstream_ports[0 ] &DP_DS_PORT_TYPE_MASK ; + +if (type !=DP_DS_PORT_TYPE_VGA ) +return max_dotclk; + + ds_max_dotclk =drm_dp_downstream_max_clock (intel_dp->dpcd, + intel_dp->downstream_ports); + +if (ds_max_dotclk !=0 ) + max_dotclk =min (max_dotclk, ds_max_dotclk); + +return max_dotclk; +} +static enum drm_mode_status intel_dp_mode_valid (struct drm_connector *connector,struct drm_display_mode *mode)
@@ -199,7 +222,9 @@ intel_dp_mode_valid(struct drm_connector *connector,struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode;int target_clock = mode->clock;int max_rate, mode_rate, max_lanes, max_link_clock; -int max_dotclk =to_i915 (connector->dev)->max_dotclk_freq; +int max_dotclk; + + max_dotclk =intel_dp_downstream_max_dotclock (intel_dp);if (is_edp (intel_dp) && fixed_mode) {if (mode->hdisplay > fixed_mode->hdisplay)
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v9 10/12 drm/i915: Update bits per component for display info
In reply to Mika KaholaDisplayPort branch device may define max supported bits per component. Update display info based on this value if bpc is defined.
v2: cleanup to match the drm_dp_helper.c patches introduced
earlier in this series
v3: Fill bpc for connector's display info in separate
drm_dp_helper function (Daniel)
v4: remove updating bpc for display info as it may be overridden
when parsing EDID. Instead, check bpc for DP branch device during compute_config
v5: Indentation fixes (Jim Bride)
--- drivers/gpu/drm/i915/intel_dp.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_dp.c +15 -1
@@ -1524,6 +1524,20 @@ void intel_dp_compute_rate(struct intel_dp *intel_dp, int port_clock, } } +int intel_dp_compute_bpp (struct intel_dp *intel_dp, +struct intel_crtc_state *pipe_config) +{ +int bpp, bpc; + + bpp = pipe_config->pipe_bpp; + bpc =drm_dp_downstream_max_bpc (intel_dp->dpcd, intel_dp->downstream_ports); + +if (bpc >0 ) + bpp =min (bpp,3 *bpc); + +return bpp; +} + bool intel_dp_compute_config(struct intel_encoder *encoder, struct intel_crtc_state *pipe_config,
@@ -1590,7 +1604,7 @@ intel_dp_compute_config(struct intel_encoder *encoder,/* Walk through all bpp values. Luckily they're all nicely spaced with 2 * bpc in between. */ - bpp = pipe_config->pipe_bpp; + bpp =intel_dp_compute_bpp (intel_dp, pipe_config);if (is_edp (intel_dp)) {/* Get bpp from vbt only for panels that dont have bpp in edid */
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v9 10/12] drm/i915: Update bits per component for display info
Quoted 13 lines · Mika Kahola
DisplayPort branch device may define max supported bits per component. Update display info based on this value if bpc is defined.
v2: cleanup to match the
drm_dp_helper.cpatches introduced
earlier in this series
v3: Fill bpc for connector's display info in separate
drm_dp_helperfunction (Daniel)
v4: remove updating bpc for display info as it may be overridden
when parsing EDID. Instead, check bpc for DP branch device duringcompute_config
v5: Indentation fixes (Jim Bride)
Quoted 1 line
Signed-off-by Mika Kahola <[email protected]>
Quoted 40 lines
--- drivers/gpu/drm/i915/intel_dp.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-)drivers/gpu/drm/i915/intel_dp.c +15
-1@@ -1524,6 +1524,20 @@ void intel_dp_compute_rate(struct intel_dp *intel_dp, int port_clock, } } +int intel_dp_compute_bpp (struct intel_dp *intel_dp, +struct intel_crtc_state *pipe_config) +{ +int bpp, bpc; + + bpp = pipe_config->pipe_bpp; + bpc =drm_dp_downstream_max_bpc (intel_dp->dpcd, intel_dp->downstream_ports); + +if (bpc >0 ) + bpp =min (bpp,3 *bpc); + +return bpp; +} + bool intel_dp_compute_config(struct intel_encoder *encoder, struct intel_crtc_state *pipe_config,@@ -1590,7 +1604,7 @@ intel_dp_compute_config(struct intel_encoder *encoder,/* Walk through all bpp values. Luckily they're all nicely spaced with 2 * bpc in between. */ - bpp = pipe_config->pipe_bpp; + bpp =intel_dp_compute_bpp (intel_dp, pipe_config);if (is_edp (intel_dp)) {/* Get bpp from vbt only for panels that dont have bpp in edid */ Signature · 1 line
2.7.4
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v9 11/12 drm: Add DP branch device info on debugfs
In reply to Mika KaholaRead DisplayPort branch device info from through debugfs interface.
v2: use drm_dp_helper routines to collect data
v3: cleanup to match the drm_dp_helper.c patches introduced
earlier in this series
v4: move DP branch device info to function 'intel_dp_branch_device_info()'
v5: initial step to move debugging info from intel_dp. to drm_dp_helper.c (Daniel)
v6: read hw and sw revision without using specific drm_dp_helper routines
v7: indentation fixes (Jim Bride)
--- drivers/gpu/drm/drm_dp_helper.c | 85 +++++++++++++++++++++++++++++++++++++ drivers/gpu/drm/i915/i915_debugfs.c | 3 ++ include/drm/drm_dp_helper.h | 2 + 3 files changed, 90 insertions(+)
drivers/gpu/drm/drm_dp_helper.c +85 -0
@@ -526,6 +526,91 @@ int drm_dp_downstream_id(struct drm_dp_aux *aux, char id[6]) }EXPORT_SYMBOL (drm_dp_downstream_id); +/** +* drm_dp_downstream_debug() - debug DP branch devices +* @m: pointer for debugfs file +* @dpcd: DisplayPort configuration data +* @port_cap: port capabilities +* @aux: DisplayPort AUX channel +* +*/ +void drm_dp_downstream_debug (struct seq_file *m, +const u8 dpcd[DP_RECEIVER_CAP_SIZE ], +const u8 port_cap[4 ],struct drm_dp_aux *aux) +{ +bool detailed_cap_info = dpcd[DP_DOWNSTREAMPORT_PRESENT ] & +DP_DETAILED_CAP_INFO_AVAILABLE ; +int clk; +int bpc; +char id[6 ]; +int len; +uint8_t rev[2 ]; +int type = port_cap[0 ] &DP_DS_PORT_TYPE_MASK ; +bool branch_device = dpcd[DP_DOWNSTREAMPORT_PRESENT ] & +DP_DWN_STRM_PORT_PRESENT ; + +seq_printf (m,"\tDP branch device present: %s\n" , + branch_device ?"yes" :"no" ); + +if (!branch_device) +return ; + +switch (type) { +case DP_DS_PORT_TYPE_DP : +seq_puts (m,"\t\tType: DisplayPort\n" ); +break ; +case DP_DS_PORT_TYPE_VGA : +seq_puts (m,"\t\tType: VGA\n" ); +break ; +case DP_DS_PORT_TYPE_DVI : +seq_puts (m,"\t\tType: DVI\n" ); +break ; +case DP_DS_PORT_TYPE_HDMI : +seq_puts (m,"\t\tType: HDMI\n" ); +break ; +case DP_DS_PORT_TYPE_NON_EDID : +seq_puts (m,"\t\tType: others without EDID support\n" ); +break ; +case DP_DS_PORT_TYPE_DP_DUALMODE : +seq_puts (m,"\t\tType: DP++\n" ); +break ; +case DP_DS_PORT_TYPE_WIRELESS : +seq_puts (m,"\t\tType: Wireless\n" ); +break ; +default : +seq_puts (m,"\t\tType: N/A\n" ); + } + +drm_dp_downstream_id (aux, id); +seq_printf (m,"\t\tID: %s\n" , id); + + len =drm_dp_dpcd_read (aux,DP_BRANCH_HW_REV , &rev[0 ],1 ); +if (len >0 ) +seq_printf (m,"\t\tHW: %d.%d\n" , + (rev[0 ] &0xf0 ) >>4 , rev[0 ] &0xf ); + + len =drm_dp_dpcd_read (aux,DP_BRANCH_SW_REV , &rev,2 ); +if (len >0 ) +seq_printf (m,"\t\tSW: %d.%d\n" , rev[0 ], rev[1 ]); + +if (detailed_cap_info) { + clk =drm_dp_downstream_max_clock (dpcd, port_cap); + +if (clk >0 ) { +if (type ==DP_DS_PORT_TYPE_VGA ) +seq_printf (m,"\t\tMax dot clock: %d kHz\n" , clk); +else +seq_printf (m,"\t\tMax TMDS clock: %d kHz\n" , clk); + } + + bpc =drm_dp_downstream_max_bpc (dpcd, port_cap); + +if (bpc >0 ) +seq_printf (m,"\t\tMax bpc: %d\n" , bpc); + } +} +EXPORT_SYMBOL (drm_dp_downstream_debug); +/* * I2C-over-AUX implementation */
drivers/gpu/drm/i915/i915_debugfs.c +3 -0
@@ -2851,6 +2851,9 @@ static void intel_dp_info(struct seq_file *m,seq_printf (m,"\taudio support: %s\n" ,yesno (intel_dp->has_audio));if (intel_connector->base.connector_type == DRM_MODE_CONNECTOR_eDP)intel_panel_info (m, &intel_connector->panel); + +drm_dp_downstream_debug (m, intel_dp->dpcd, intel_dp->downstream_ports, + &intel_dp->aux); } static void intel_hdmi_info(struct seq_file *m,
include/drm/drm_dp_helper.h +2 -0
@@ -823,6 +823,8 @@ int drm_dp_downstream_max_clock(const u8 dpcd[DP_RECEIVER_CAP_SIZE],int drm_dp_downstream_max_bpc (const u8 dpcd[DP_RECEIVER_CAP_SIZE ],const u8 port_cap[4 ]);int drm_dp_downstream_id (struct drm_dp_aux *aux,char id[6 ]); +void drm_dp_downstream_debug (struct seq_file *m,const u8 dpcd[DP_RECEIVER_CAP_SIZE ], +const u8 port_cap[4 ],struct drm_dp_aux *aux);void drm_dp_aux_init (struct drm_dp_aux *aux);int drm_dp_aux_register (struct drm_dp_aux *aux);
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v9 11/12] drm: Add DP branch device info on debugfs
Quoted 11 lines · Mika Kahola
Read DisplayPort branch device info from through debugfs interface.
v2: use
drm_dp_helperroutines to collect data
v3: cleanup to match thedrm_dp_helper.cpatches introduced
earlier in this series
v4: move DP branch device info to function 'intel_dp_branch_device_info()'
v5: initial step to move debugging info fromintel_dp. todrm_dp_helper.c(Daniel)
v6: read hw and sw revision without using specificdrm_dp_helperroutines
v7: indentation fixes (Jim Bride)
Quoted 1 line
Signed-off-by Mika Kahola <[email protected]>
Quoted 131 lines
--- drivers/gpu/drm/drm_dp_helper.c | 85 +++++++++++++++++++++++++++++++++++++ drivers/gpu/drm/i915/i915_debugfs.c | 3 ++ include/drm/drm_dp_helper.h | 2 + 3 files changed, 90 insertions(+)drivers/gpu/drm/drm_dp_helper.c +85
-0@@ -526,6 +526,91 @@ int drm_dp_downstream_id(struct drm_dp_aux *aux, char id[6]) }EXPORT_SYMBOL (drm_dp_downstream_id); +/** +* drm_dp_downstream_debug() - debug DP branch devices +* @m: pointer for debugfs file +* @dpcd: DisplayPort configuration data +* @port_cap: port capabilities +* @aux: DisplayPort AUX channel +* +*/ +void drm_dp_downstream_debug (struct seq_file *m, +const u8 dpcd[DP_RECEIVER_CAP_SIZE ], +const u8 port_cap[4 ],struct drm_dp_aux *aux) +{ +bool detailed_cap_info = dpcd[DP_DOWNSTREAMPORT_PRESENT ] & +DP_DETAILED_CAP_INFO_AVAILABLE ; +int clk; +int bpc; +char id[6 ]; +int len; +uint8_t rev[2 ]; +int type = port_cap[0 ] &DP_DS_PORT_TYPE_MASK ; +bool branch_device = dpcd[DP_DOWNSTREAMPORT_PRESENT ] & +DP_DWN_STRM_PORT_PRESENT ; + +seq_printf (m,"\tDP branch device present: %s\n" , + branch_device ?"yes" :"no" ); + +if (!branch_device) +return ; + +switch (type) { +case DP_DS_PORT_TYPE_DP : +seq_puts (m,"\t\tType: DisplayPort\n" ); +break ; +case DP_DS_PORT_TYPE_VGA : +seq_puts (m,"\t\tType: VGA\n" ); +break ; +case DP_DS_PORT_TYPE_DVI : +seq_puts (m,"\t\tType: DVI\n" ); +break ; +case DP_DS_PORT_TYPE_HDMI : +seq_puts (m,"\t\tType: HDMI\n" ); +break ; +case DP_DS_PORT_TYPE_NON_EDID : +seq_puts (m,"\t\tType: others without EDID support\n" ); +break ; +case DP_DS_PORT_TYPE_DP_DUALMODE : +seq_puts (m,"\t\tType: DP++\n" ); +break ; +case DP_DS_PORT_TYPE_WIRELESS : +seq_puts (m,"\t\tType: Wireless\n" ); +break ; +default : +seq_puts (m,"\t\tType: N/A\n" ); + } + +drm_dp_downstream_id (aux, id); +seq_printf (m,"\t\tID: %s\n" , id); + + len =drm_dp_dpcd_read (aux,DP_BRANCH_HW_REV , &rev[0 ],1 ); +if (len >0 ) +seq_printf (m,"\t\tHW: %d.%d\n" , + (rev[0 ] &0xf0 ) >>4 , rev[0 ] &0xf ); + + len =drm_dp_dpcd_read (aux,DP_BRANCH_SW_REV , &rev,2 ); +if (len >0 ) +seq_printf (m,"\t\tSW: %d.%d\n" , rev[0 ], rev[1 ]); + +if (detailed_cap_info) { + clk =drm_dp_downstream_max_clock (dpcd, port_cap); + +if (clk >0 ) { +if (type ==DP_DS_PORT_TYPE_VGA ) +seq_printf (m,"\t\tMax dot clock: %d kHz\n" , clk); +else +seq_printf (m,"\t\tMax TMDS clock: %d kHz\n" , clk); + } + + bpc =drm_dp_downstream_max_bpc (dpcd, port_cap); + +if (bpc >0 ) +seq_printf (m,"\t\tMax bpc: %d\n" , bpc); + } +} +EXPORT_SYMBOL (drm_dp_downstream_debug); +/* * I2C-over-AUX implementation */ drivers/gpu/drm/i915/i915_debugfs.c +3
-0@@ -2851,6 +2851,9 @@ static void intel_dp_info(struct seq_file *m,seq_printf (m,"\taudio support: %s\n" ,yesno (intel_dp->has_audio));if (intel_connector->base.connector_type == DRM_MODE_CONNECTOR_eDP)intel_panel_info (m, &intel_connector->panel); + +drm_dp_downstream_debug (m, intel_dp->dpcd, intel_dp->downstream_ports, + &intel_dp->aux); } static void intel_hdmi_info(struct seq_file *m,include/drm/drm_dp_helper.h +2
-0@@ -823,6 +823,8 @@ int drm_dp_downstream_max_clock(const u8 dpcd[DP_RECEIVER_CAP_SIZE],int drm_dp_downstream_max_bpc (const u8 dpcd[DP_RECEIVER_CAP_SIZE ],const u8 port_cap[4 ]);int drm_dp_downstream_id (struct drm_dp_aux *aux,char id[6 ]); +void drm_dp_downstream_debug (struct seq_file *m,const u8 dpcd[DP_RECEIVER_CAP_SIZE ], +const u8 port_cap[4 ],struct drm_dp_aux *aux);void drm_dp_aux_init (struct drm_dp_aux *aux);int drm_dp_aux_register (struct drm_dp_aux *aux);Signature · 1 line
2.7.4
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v9 12/12 drm/i915: Check TMDS clock DP to HDMI dongle
In reply to Mika KaholaRespect max TMDS clock frequency from DPCD for active DP to HDMI adapters.
--- drivers/gpu/drm/i915/intel_drv.h | 3 +++ drivers/gpu/drm/i915/intel_hdmi.c | 27 +++++++++++++++++++++++++++ 2 files changed, 30 insertions(+)
drivers/gpu/drm/i915/intel_drv.h +3 -0
@@ -823,6 +823,9 @@ struct intel_hdmi {i915_reg_t hdmi_reg;int ddc_bus;struct { +int max_tmds_clock; + } dp_to_hdmi; +struct {enum drm_dp_dual_mode_type type;int max_tmds_clock; } dp_dual_mode;
drivers/gpu/drm/i915/intel_hdmi.c +27 -0
@@ -1220,6 +1220,9 @@ static int hdmi_port_clock_limit(struct intel_hdmi *hdmi,int max_tmds_clock =intel_hdmi_source_max_tmds_clock (to_i915 (dev));if (respect_downstream_limits) { +if (hdmi->dp_to_hdmi.max_tmds_clock) + max_tmds_clock =min (max_tmds_clock, + hdmi->dp_to_hdmi.max_tmds_clock);if (hdmi->dp_dual_mode.max_tmds_clock) max_tmds_clock =min (max_tmds_clock, hdmi->dp_dual_mode.max_tmds_clock);
@@ -1390,11 +1393,33 @@ intel_hdmi_unset_edid(struct drm_connector *connector) intel_hdmi->dp_dual_mode.type =DRM_DP_DUAL_MODE_NONE ; intel_hdmi->dp_dual_mode.max_tmds_clock =0 ; + intel_hdmi->dp_to_hdmi.max_tmds_clock =0 ; +kfree (to_intel_connector (connector)->detect_edid);to_intel_connector (connector)->detect_edid =NULL ; }static void +intel_hdmi_dp_adapter_detect (struct drm_connector *connector) +{ +struct intel_hdmi *intel_hdmi =intel_attached_hdmi (connector); +struct intel_digital_port *intel_dig_port = +hdmi_to_dig_port (intel_hdmi); +struct intel_dp *intel_dp = &intel_dig_port->dp; +int type = intel_dp->downstream_ports[0 ] &DP_DS_PORT_TYPE_MASK ; + +if (type !=DP_DS_PORT_TYPE_HDMI ) +return ; + + intel_hdmi->dp_to_hdmi.max_tmds_clock = +drm_dp_downstream_max_clock (intel_dp->dpcd, + intel_dp->downstream_ports); + +DRM_DEBUG_KMS ("DP HDMI adaptor detected (max TMDS clock : %d kHz\n" , + intel_hdmi->dp_to_hdmi.max_tmds_clock); +} + +static void intel_hdmi_dp_dual_mode_detect (struct drm_connector *connector,bool has_edid) {struct drm_i915_private *dev_priv =to_i915 (connector->dev);
@@ -1454,6 +1479,8 @@ intel_hdmi_set_edid(struct drm_connector *connector)intel_hdmi_dp_dual_mode_detect (connector, edid !=NULL ); +intel_hdmi_dp_adapter_detect (connector); +intel_display_power_put (dev_priv,POWER_DOMAIN_GMBUS );to_intel_connector (connector)->detect_edid = edid;
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for drm/i915: DP branch devices (rev10)
In reply to Mika Kahola== Series Details ==
== Series Details ==
Series: drm/i915: DP branch devices (rev10)
URL : https://patchwork.freedesktop.org/series/6658/
State : success
== Summary ==
Series 6658v10 drm/i915: DP branch devices
http://patchwork.freedesktop.org/api/1.0/series/6658/revisions/10/mbox/
Test drv_module_reload_basic:
skip -> PASS (fi-skl-6260u)
fi-bdw-5557u total:254 pass:238 dwarn:0 dfail:0 fail:1 skip:15 fi-bsw-n3050 total:254 pass:207 dwarn:0 dfail:0 fail:1 skip:46 fi-byt-n2820 total:254 pass:211 dwarn:0 dfail:0 fail:2 skip:41 fi-hsw-4770k total:254 pass:231 dwarn:0 dfail:0 fail:1 skip:22 fi-hsw-4770r total:254 pass:227 dwarn:0 dfail:0 fail:1 skip:26 fi-ilk-650 total:254 pass:183 dwarn:0 dfail:0 fail:3 skip:68 fi-ivb-3520m total:254 pass:222 dwarn:0 dfail:0 fail:1 skip:31 fi-ivb-3770 total:254 pass:222 dwarn:0 dfail:0 fail:1 skip:31 fi-skl-6260u total:254 pass:239 dwarn:0 dfail:0 fail:1 skip:14 fi-skl-6700hq total:254 pass:226 dwarn:0 dfail:0 fail:2 skip:26 fi-skl-6700k total:254 pass:224 dwarn:1 dfail:0 fail:1 skip:28 fi-snb-2520m total:254 pass:208 dwarn:0 dfail:0 fail:1 skip:45 fi-snb-2600 total:254 pass:208 dwarn:0 dfail:0 fail:1 skip:45
Results at /archive/results/CI_IGT_test/Patchwork_2500/
5986f290e25f42d3d5df390411cc43683deb1301 drm-intel-nightly: 2016y-09m-08d-09h-11m-50s UTC integration manifest 80c523f drm/i915: Check TMDS clock DP to HDMI dongle
e3882c5 drm: Add DP branch device info on debugfs
63d1119 drm/i915: Update bits per component for display info
611f82d drm/i915: Check pixel rate for DP to VGA dongle
8f0a006 drm/i915: Read DP branch device SW revision
7d16992 drm/i915: Read DP branch device HW revision
de61c62 drm/i915: Cleanup DisplayPort AUX channel initialization
79e778d drm: Read DP branch device id
16ba6e9 drm: Helper to read max bits per component
c0d1c8a drm: Helper to read max clock rate
88545b2 drm: Drop VGA from bpc definitions
875fc5e drm: Add missing DP downstream port types
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Jani Nikula
maintainerQuoted 6 lines · Mika Kahola
Prep work for DP branch device handling
This series of patches reads DPCD register 0x80h for receiver capabilities for DP branch devices. The branch device types are converters for the following standards
Quoted 8 lines
- DP to VGA
- DP to DVI
- DP to HDMI
- DP++ dual mode
- Wireless WiGigDPCD register defines max pixel rate for VGA dongles. This check is carried out during mode validation.
Pushed all except the last patch to drm-intel-next-queued, with Dave's IRC ack on queuing the drm patches through the Intel tree.
BR,
Jani.
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel