mvme147 status
Hi Geert,
do you know what the status of the mvme147 board support / SCSI driver is? The mvme147 scsi driver is one of the few remaining drivers still using the scsi_module infrastructure thay I'd like to finally kill off.
Unlike some other drivers it should be fairly trivial to convert, but I'd like to first know if there is any point in investing that work.
A message that is not in the archive (sent off-list or not yet received): CACz-3rgtA0pvSZV38ezRWAxDsgcEa_+_teQ3-1dvY4Cf22hfyQ@mail.gmail.com
Hi Kars, Christoph,
Quoted 6 lines · Kars de Jong
Op zondag 11 september 2016 heeft Christoph Hellwig <[email protected]> het volgende geschreven:
Quoted 4 lines
do you know what the status of the mvme147 board support / SCSI driver is? The mvme147 scsi driver is one of the few remaining drivers still using the
scsi_moduleinfrastructure thay I'd like to finally kill off.
Quoted 7 lines
Quoted 2 lines
Unlike some other drivers it should be fairly trivial to convert, but I'd like to first know if there is any point in investing that work.
I still have some MVME147 hardware, but I haven't run anything more recent than 2.6 kernels on it. I doubt anyone is still using it.
Are there still other users of the chipset driver? Does
CONFIG_MVME147
The wd33c93 chipset driver is also used on various Amigas and on SGI MIPS systems. Those no longer use scsi_module, though (IIRC I converted most of them in 2009).
Quoted 1 line
still build?
Of course it does ;-)
Quoted 2 lines
I personally don't have a big issue with just killing the board support code, it can always be revived when needed.
Killing board support doesn't gain us that much...
Stephen, are you still using them?
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
Quoted 6 lines · Geert Uytterhoeven
The wd33c93 chipset driver is also used on various Amigas and on SGI MIPS systems. Those no longer use
scsi_module, though (IIRC I converted most of them in 2009).Quoted 1 line
still build?
Quoted 8 lines
Of course it does ;-)
Quoted 2 lines
I personally don't have a big issue with just killing the board support code, it can always be revived when needed.
Killing board support doesn't gain us that much...
Stephen, are you still using them?
I'll convert it then, shouldn't be too much work. Let's hope the buildbot covers m68k..
Quoted 1 line · Christoph Hellwig
Let's hope the buildbot covers m68k..
Yes it does.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
[email protected] wrote on 09/12/2016 05:43:48 PM:
Quoted 11 lines
From: Geert Uytterhoeven <[email protected]>
To: Kars de Jong <[email protected]>
Cc: Christoph Hellwig <[email protected]>, "[email protected] m68k.org" <[email protected]>, Stephen N Chivers/AUS/CSC@CSC
Date: 09/12/2016 05:43 PM
Subject: Re: mvme147 status
Sent by: [email protected]Hi Kars, Christoph,
On Sun, Sep 11, 2016 at 7:49 PM, Kars de Jong <[email protected]>
Quoted 1 line · wrote:
Quoted 1 line
Op zondag 11 september 2016 heeft Christoph Hellwig
<[email protected]> het
Quoted 2 lines
Quoted 2 lines
volgende geschreven:
Quoted 1 line
do you know what the status of the mvme147 board support / SCSI
driver
Quoted 1 line
Quoted 1 line
Quoted 1 line
is? The mvme147 scsi driver is one of the few remaining drivers
still
Quoted 1 line
Quoted 1 line
Quoted 1 line
using the
scsi_moduleinfrastructure thay I'd like to finally kill
off.
Quoted 5 lines
Quoted 5 lines
Quoted 3 lines
Unlike some other drivers it should be fairly trivial to convert, but I'd like to first know if there is any point in investing that work.
I still have some MVME147 hardware, but I haven't run anything more
recent
Quoted 3 lines
Quoted 3 lines
than 2.6 kernels on it. I doubt anyone is still using it.
Are there still other users of the chipset driver? Does
CONFIG_MVME147
Quoted 2 lines
The wd33c93 chipset driver is also used on various Amigas and on SGI
MIPS
Quoted 1 line
systems. Those no longer use
scsi_module, though (IIRC I converted most
of
Quoted 7 lines
them in 2009).
Quoted 1 line
still build?
Of course it does ;-)
Quoted 1 line
I personally don't have a big issue with just killing the board
support
Quoted 5 lines
Quoted 1 line
code, it can always be revived when needed.
Killing board support doesn't gain us that much...
Stephen, are you still using them?
Yes, I am still using the Motorola MVME-167 boards.
They are operated without disks (boot from a NFS file server). They currently
run kernel 2.6.24 as a baseline.
Support for the serial console (serial167) on the MVME-167 board was dropped in
linux 2.6.37.
I have experimented with later kernel versions (up to and including 3.17) and have a revised device
driver for the serial console (now called mvme167x_scc) as the original one was
dropped around 2.6.37 kernel. The new console driver works without problems
but I have never submitted the patches. Geert has seen a version of them but
I haven't had the time to continue the work as my day job has been very intense
for about two years.
I do not have any SCSI disks for them, although I might be able to cobble something together using some old SUN-4 disks we have here. The big problem
is the SCSI cable from the "transition" module at the back of the VME rack to SCSI enclosure.
Quoted 10 lines
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]In personal conversations with technical people, I call myself a hacker.
But
Quoted 1 line
when I'm talking to journalists I just say "programmer" or somethinglike
that.
Quoted 5 lines
-- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe linux-m68k" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
2016-09-13 22:05 GMT+02:00 Stephen N Chivers <[email protected]>:
Quoted 3 lines
Quoted 1 line
Stephen, are you still using them?
Yes, I am still using the Motorola MVME-167 boards.
Note that this is about the MVME-147, not 167. Those are completely different hardware (for instance, NCR SCSI instead of WD).
Regards,
Kars.
Hi Christoph!
Quoted 2 lines · Christoph Hellwig
Unlike some other drivers it should be fairly trivial to convert, but I'd like to first know if there is any point in investing that work.
I would be very interested in doing that, probably with some assistance from Geert. I'm interested in getting more involved into kernel development but I have successfully submitted only two patches so far.
This task sounds like a low-hanging fruit though and since I actually have a VME system among other 68k machines, I have also a personal interest to keep this driver.
Thanks,
Adrian
Signature · 4 lines
.''`. John Paul Adrian Glaubitz : :' : Debian Developer - [email protected] `. `' Freie Universitaet Berlin - [email protected] `- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
Quoted 3 lines · John Paul Adrian Glaubitz
This task sounds like a low-hanging fruit though and since I actually have a VME system among other 68k machines, I have also a personal interest to keep this driver.
That sounds great. Once you've ressurrected your system I'd be happy to mentor you for the SCSI driver work.
Hi Adrian,
Quoted 11 lines · John Paul Adrian Glaubitz
Quoted 2 lines · Christoph Hellwig
Unlike some other drivers it should be fairly trivial to convert, but I'd like to first know if there is any point in investing that work.
I would be very interested in doing that, probably with some assistance from Geert. I'm interested in getting more involved into kernel development but I have successfully submitted only two patches so far.
This task sounds like a low-hanging fruit though and since I actually have a VME system among other 68k machines, I have also a personal interest to keep this driver.
Thanks a lot!
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
Quoted 9 lines · John Paul Adrian Glaubitz
Hi Christoph!
Quoted 2 lines · Christoph Hellwig
Unlike some other drivers it should be fairly trivial to convert, but I'd like to first know if there is any point in investing that work.
I would be very interested in doing that, probably with some assistance from Geert. I'm interested in getting more involved into kernel development but I have successfully submitted only two patches so far.
Did yo get any chance to look into this project? My offer for help still stands, but I'd like to make some progress on this issue.
Hi Christoph!
Quoted 6 lines · Christoph Hellwig
Quoted 3 lines
I would be very interested in doing that, probably with some assistance from Geert. I'm interested in getting more involved into kernel development but I have successfully submitted only two patches so far.
Did yo get any chance to look into this project? My offer for help still stands, but I'd like to make some progress on this issue.
Sorry, it somehow fell off the table. I'll try to look at it this weekend if that's still ok.
Adrian
Signature · 4 lines
.''`. John Paul Adrian Glaubitz : :' : Debian Developer - [email protected] `. `' Freie Universitaet Berlin - [email protected] `- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
Quoted 2 lines · John Paul Adrian Glaubitz
Sorry, it somehow fell off the table. I'll try to look at it this weekend if that's still ok.
Sure, it's not _that_ urgent.
Quoted 5 lines · Christoph Hellwig
Quoted 2 lines · John Paul Adrian Glaubitz
Sorry, it somehow fell off the table. I'll try to look at it this weekend if that's still ok.
Sure, it's not _that_ urgent.
I'm starting to work on this now and will get back to you once I run into any issues. Thanks a lot for your patience!
Adrian
Signature · 4 lines
.''`. John Paul Adrian Glaubitz : :' : Debian Developer - [email protected] `. `' Freie Universitaet Berlin - [email protected] `- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913