wandboard: Make explicit that a ext4 rootfs is used

From: Fabio Estevam <[email protected]>

Make explicit that a ext4 rootfs is used.

As explained by Thomas Petazzoni:

"the ext4 filesystem is already used.
Indeed, the ext4 image is a symlink to the ext2 image, and the ext2 image is in fact an ext4 image:

-rw-r--r-- 1 thomas thomas 3763200 sept. 11 21:54 rootfs.ext2
lrwxrwxrwx 1 thomas thomas 11 sept. 11 21:54 rootfs.ext4 -> rootfs.ext2"

---
Change sinces v1:
- Fix Subject and commit log to explain that ext4 was already used and that this patch only make it more evident. (Thomas)

 board/wandboard/genimage.cfg | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

index 32c7c16..b23a91b 100644
@@ -2,7 +2,7 @@
 #
 # The SD card must have at least 1 MB free at the beginning.
 # U-Boot and its environment are dumped as is.
-# A single root filesystem partition is required (Ext2 in this case).
+# A single root filesystem partition is required (Ext4 in this case).
 #
 # For details about the layout, see:
 # http://wiki.wandboard.org/index.php/Boot-process

@@ -25,7 +25,7 @@ image sdcard.img {
 
   partition rootfs {
     partition-type = 0x83
-    image = "rootfs.ext2"
+    image = "rootfs.ext4"
     size = 512M
   }
 }

2.7.4

Hello,

Applied to master, thanks. However maybe at some point you want to move the wandboard to use the generic freescale genimage/post-image script that I merged yesterday?

Thanks!

Thomas

Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

Hi Thomas,

Yes, I will try to move it to the generic genimage/post-image script. Thanks