mfd: intel-lpss: Add default I2C device properties for Apollo Lake

PATCH Applied Jarkko Nikula 3 participants 4 messages Sep 12, 2016 – Sep 13, 2016

Subsystems (2)

Multifunction devices (MFD) Intel LPSS (Low Power SubSystem) drivers

lore

Share & tools

lore

Jarkko Nikula

author

2016-09-12 11:41 UTC #0 lore raw

PATCH 1/1 mfd: intel-lpss: Add default I2C device properties for Apollo Lake

Default I2C device properties for Intel Broxton, especially SDA hold time may not be enough on Intel Apollo Lake. These properties are used in case we don't get timing parameters from ACPI.

The default SDA hold time for Broxton may fail with arbitration lost errors on Apollo Lake:

i2c_designware i2c_designware.1: i2c_dw_handle_tx_abort: lost arbitration

Fix this by using different default device properties on Apollo Lake than Broxton.

Reported-by Paul Liu <[email protected]>

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=156181

Signed-off-by Jarkko Nikula <[email protected]>

---
Hi Paul. This is the same patch I shared you offline but rebased on top of mfd.git, essentially on top of commit 19063e1b0aaa ("mfd: lpss: Add Intel Kaby Lake PCH-H PCI IDs") and commit log a little bit edited.

---
 drivers/mfd/intel-lpss-acpi.c | 14 +++++++++++++-
 drivers/mfd/intel-lpss-pci.c  | 28 ++++++++++++++++++++--------
 2 files changed, 33 insertions(+), 9 deletions(-)

drivers/mfd/intel-lpss-acpi.c +13 -1

index 7ddc4a9563ea..6bf8d643d942 100644
@@ -52,6 +52,18 @@ static const struct intel_lpss_platform_info bxt_i2c_info = {
 	.properties = bxt_i2c_properties,
 };
 
+static struct property_entry apl_i2c_properties[] = {
+	PROPERTY_ENTRY_U32("i2c-sda-hold-time-ns", 207),
+	PROPERTY_ENTRY_U32("i2c-sda-falling-time-ns", 171),
+	PROPERTY_ENTRY_U32("i2c-scl-falling-time-ns", 208),
+	{ },
+};
+
+static const struct intel_lpss_platform_info apl_i2c_info = {
+	.clk_rate = 133000000,
+	.properties = apl_i2c_properties,
+};
+
 static const struct acpi_device_id intel_lpss_acpi_ids[] = {
 	/* SPT */
 	{ "INT3446", (kernel_ulong_t)&spt_i2c_info },

@@ -61,7 +73,7 @@ static const struct acpi_device_id intel_lpss_acpi_ids[] = {
 	{ "80860ABC", (kernel_ulong_t)&bxt_info },
 	{ "80860AC2", (kernel_ulong_t)&bxt_info },
 	/* APL */
-	{ "80865AAC", (kernel_ulong_t)&bxt_i2c_info },
+	{ "80865AAC", (kernel_ulong_t)&apl_i2c_info },
 	{ "80865ABC", (kernel_ulong_t)&bxt_info },
 	{ "80865AC2", (kernel_ulong_t)&bxt_info },
 	{ }

drivers/mfd/intel-lpss-pci.c +20 -8

index d19569a0f2f9..3228fd182a99 100644
@@ -111,6 +111,18 @@ static const struct intel_lpss_platform_info bxt_i2c_info = {
 	.properties = bxt_i2c_properties,
 };
 
+static struct property_entry apl_i2c_properties[] = {
+	PROPERTY_ENTRY_U32("i2c-sda-hold-time-ns", 207),
+	PROPERTY_ENTRY_U32("i2c-sda-falling-time-ns", 171),
+	PROPERTY_ENTRY_U32("i2c-scl-falling-time-ns", 208),
+	{ },
+};
+
+static const struct intel_lpss_platform_info apl_i2c_info = {
+	.clk_rate = 133000000,
+	.properties = apl_i2c_properties,
+};
+
 static const struct intel_lpss_platform_info kbl_info = {
 	.clk_rate = 120000000,
 };

@@ -159,14 +171,14 @@ static const struct pci_device_id intel_lpss_pci_ids[] = {
 	{ PCI_VDEVICE(INTEL, 0x1aee), (kernel_ulong_t)&bxt_uart_info },
 
 	/* APL */
-	{ PCI_VDEVICE(INTEL, 0x5aac), (kernel_ulong_t)&bxt_i2c_info },
-	{ PCI_VDEVICE(INTEL, 0x5aae), (kernel_ulong_t)&bxt_i2c_info },
-	{ PCI_VDEVICE(INTEL, 0x5ab0), (kernel_ulong_t)&bxt_i2c_info },
-	{ PCI_VDEVICE(INTEL, 0x5ab2), (kernel_ulong_t)&bxt_i2c_info },
-	{ PCI_VDEVICE(INTEL, 0x5ab4), (kernel_ulong_t)&bxt_i2c_info },
-	{ PCI_VDEVICE(INTEL, 0x5ab6), (kernel_ulong_t)&bxt_i2c_info },
-	{ PCI_VDEVICE(INTEL, 0x5ab8), (kernel_ulong_t)&bxt_i2c_info },
-	{ PCI_VDEVICE(INTEL, 0x5aba), (kernel_ulong_t)&bxt_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x5aac), (kernel_ulong_t)&apl_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x5aae), (kernel_ulong_t)&apl_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x5ab0), (kernel_ulong_t)&apl_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x5ab2), (kernel_ulong_t)&apl_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x5ab4), (kernel_ulong_t)&apl_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x5ab6), (kernel_ulong_t)&apl_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x5ab8), (kernel_ulong_t)&apl_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x5aba), (kernel_ulong_t)&apl_i2c_info },
 	{ PCI_VDEVICE(INTEL, 0x5abc), (kernel_ulong_t)&bxt_uart_info },
 	{ PCI_VDEVICE(INTEL, 0x5abe), (kernel_ulong_t)&bxt_uart_info },
 	{ PCI_VDEVICE(INTEL, 0x5ac0), (kernel_ulong_t)&bxt_uart_info },

Signature · 1 line

2.9.3

Mika Westerberg

Acked-by on v1 1/1

2016-09-12 13:52 UTC #1 lore raw

Quoted 7 lines · Jarkko Nikula

Default I2C device properties for Intel Broxton, especially SDA hold time may not be enough on Intel Apollo Lake. These properties are used in case we don't get timing parameters from ACPI.
The default SDA hold time for Broxton may fail with arbitration lost errors on Apollo Lake:

Quoted 8 lines

i2c_designware i2c_designware.1: i2c_dw_handle_tx_abort: lost arbitration
Fix this by using different default device properties on Apollo Lake than Broxton.
Reported-by Paul Liu <[email protected]>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=156181
Signed-off-by Jarkko Nikula <[email protected]>

Acked-by Mika Westerberg <[email protected]>

Lee Jones

2016-09-12 13:54 UTC #2 lore raw

In reply to Jarkko Nikula

Quoted 15 lines · Jarkko Nikula

Default I2C device properties for Intel Broxton, especially SDA hold time may not be enough on Intel Apollo Lake. These properties are used in case we don't get timing parameters from ACPI.
The default SDA hold time for Broxton may fail with arbitration lost errors on Apollo Lake:
i2c_designware i2c_designware.1: i2c_dw_handle_tx_abort: lost arbitration
Fix this by using different default device properties on Apollo Lake than Broxton.
Reported-by Paul Liu <[email protected]>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=156181
Signed-off-by Jarkko Nikula <[email protected]>

Quoted 8 lines

---
Hi Paul. This is the same patch I shared you offline but rebased on top of mfd.git, essentially on top of commit 19063e1b0aaa ("mfd: lpss: Add Intel Kaby Lake PCH-H PCI IDs") and commit log a little bit edited.
---
 drivers/mfd/intel-lpss-acpi.c | 14 +++++++++++++-
 drivers/mfd/intel-lpss-pci.c  | 28 ++++++++++++++++++++--------
 2 files changed, 33 insertions(+), 9 deletions(-)

Patch looks okay.

Would like Paul's Acked-by or Tested-by to complete the loop.

Acked-for-MFD-by Lee Jones <[email protected]>

Quoted 78 lines

drivers/mfd/intel-lpss-acpi.c +13 -1

index 7ddc4a9563ea..6bf8d643d942 100644
@@ -52,6 +52,18 @@ static const struct intel_lpss_platform_info bxt_i2c_info = {
 	.properties = bxt_i2c_properties,
 };
 
+static struct property_entry apl_i2c_properties[] = {
+	PROPERTY_ENTRY_U32("i2c-sda-hold-time-ns", 207),
+	PROPERTY_ENTRY_U32("i2c-sda-falling-time-ns", 171),
+	PROPERTY_ENTRY_U32("i2c-scl-falling-time-ns", 208),
+	{ },
+};
+
+static const struct intel_lpss_platform_info apl_i2c_info = {
+	.clk_rate = 133000000,
+	.properties = apl_i2c_properties,
+};
+
 static const struct acpi_device_id intel_lpss_acpi_ids[] = {
 	/* SPT */
 	{ "INT3446", (kernel_ulong_t)&spt_i2c_info },

@@ -61,7 +73,7 @@ static const struct acpi_device_id intel_lpss_acpi_ids[] = {
 	{ "80860ABC", (kernel_ulong_t)&bxt_info },
 	{ "80860AC2", (kernel_ulong_t)&bxt_info },
 	/* APL */
-	{ "80865AAC", (kernel_ulong_t)&bxt_i2c_info },
+	{ "80865AAC", (kernel_ulong_t)&apl_i2c_info },
 	{ "80865ABC", (kernel_ulong_t)&bxt_info },
 	{ "80865AC2", (kernel_ulong_t)&bxt_info },
 	{ }

drivers/mfd/intel-lpss-pci.c +20 -8

index d19569a0f2f9..3228fd182a99 100644
@@ -111,6 +111,18 @@ static const struct intel_lpss_platform_info bxt_i2c_info = {
 	.properties = bxt_i2c_properties,
 };
 
+static struct property_entry apl_i2c_properties[] = {
+	PROPERTY_ENTRY_U32("i2c-sda-hold-time-ns", 207),
+	PROPERTY_ENTRY_U32("i2c-sda-falling-time-ns", 171),
+	PROPERTY_ENTRY_U32("i2c-scl-falling-time-ns", 208),
+	{ },
+};
+
+static const struct intel_lpss_platform_info apl_i2c_info = {
+	.clk_rate = 133000000,
+	.properties = apl_i2c_properties,
+};
+
 static const struct intel_lpss_platform_info kbl_info = {
 	.clk_rate = 120000000,
 };

@@ -159,14 +171,14 @@ static const struct pci_device_id intel_lpss_pci_ids[] = {
 	{ PCI_VDEVICE(INTEL, 0x1aee), (kernel_ulong_t)&bxt_uart_info },
 
 	/* APL */
-	{ PCI_VDEVICE(INTEL, 0x5aac), (kernel_ulong_t)&bxt_i2c_info },
-	{ PCI_VDEVICE(INTEL, 0x5aae), (kernel_ulong_t)&bxt_i2c_info },
-	{ PCI_VDEVICE(INTEL, 0x5ab0), (kernel_ulong_t)&bxt_i2c_info },
-	{ PCI_VDEVICE(INTEL, 0x5ab2), (kernel_ulong_t)&bxt_i2c_info },
-	{ PCI_VDEVICE(INTEL, 0x5ab4), (kernel_ulong_t)&bxt_i2c_info },
-	{ PCI_VDEVICE(INTEL, 0x5ab6), (kernel_ulong_t)&bxt_i2c_info },
-	{ PCI_VDEVICE(INTEL, 0x5ab8), (kernel_ulong_t)&bxt_i2c_info },
-	{ PCI_VDEVICE(INTEL, 0x5aba), (kernel_ulong_t)&bxt_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x5aac), (kernel_ulong_t)&apl_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x5aae), (kernel_ulong_t)&apl_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x5ab0), (kernel_ulong_t)&apl_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x5ab2), (kernel_ulong_t)&apl_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x5ab4), (kernel_ulong_t)&apl_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x5ab6), (kernel_ulong_t)&apl_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x5ab8), (kernel_ulong_t)&apl_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x5aba), (kernel_ulong_t)&apl_i2c_info },
 	{ PCI_VDEVICE(INTEL, 0x5abc), (kernel_ulong_t)&bxt_uart_info },
 	{ PCI_VDEVICE(INTEL, 0x5abe), (kernel_ulong_t)&bxt_uart_info },
 	{ PCI_VDEVICE(INTEL, 0x5ac0), (kernel_ulong_t)&bxt_uart_info },

Signature · 4 lines

Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Lee Jones

Applied

2016-09-13 08:57 UTC #3 lore raw

In reply to Jarkko Nikula

Quoted 15 lines · Jarkko Nikula

Default I2C device properties for Intel Broxton, especially SDA hold time may not be enough on Intel Apollo Lake. These properties are used in case we don't get timing parameters from ACPI.
The default SDA hold time for Broxton may fail with arbitration lost errors on Apollo Lake:
i2c_designware i2c_designware.1: i2c_dw_handle_tx_abort: lost arbitration
Fix this by using different default device properties on Apollo Lake than Broxton.
Reported-by Paul Liu <[email protected]>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=156181
Signed-off-by Jarkko Nikula <[email protected]>

Quoted 8 lines

---
Hi Paul. This is the same patch I shared you offline but rebased on top of mfd.git, essentially on top of commit 19063e1b0aaa ("mfd: lpss: Add Intel Kaby Lake PCH-H PCI IDs") and commit log a little bit edited.
---
 drivers/mfd/intel-lpss-acpi.c | 14 +++++++++++++-
 drivers/mfd/intel-lpss-pci.c  | 28 ++++++++++++++++++++--------
 2 files changed, 33 insertions(+), 9 deletions(-)

Mika's Ack is good enough.

Applied, thanks.

Quoted 78 lines

drivers/mfd/intel-lpss-acpi.c +13 -1

index 7ddc4a9563ea..6bf8d643d942 100644
@@ -52,6 +52,18 @@ static const struct intel_lpss_platform_info bxt_i2c_info = {
 	.properties = bxt_i2c_properties,
 };
 
+static struct property_entry apl_i2c_properties[] = {
+	PROPERTY_ENTRY_U32("i2c-sda-hold-time-ns", 207),
+	PROPERTY_ENTRY_U32("i2c-sda-falling-time-ns", 171),
+	PROPERTY_ENTRY_U32("i2c-scl-falling-time-ns", 208),
+	{ },
+};
+
+static const struct intel_lpss_platform_info apl_i2c_info = {
+	.clk_rate = 133000000,
+	.properties = apl_i2c_properties,
+};
+
 static const struct acpi_device_id intel_lpss_acpi_ids[] = {
 	/* SPT */
 	{ "INT3446", (kernel_ulong_t)&spt_i2c_info },

@@ -61,7 +73,7 @@ static const struct acpi_device_id intel_lpss_acpi_ids[] = {
 	{ "80860ABC", (kernel_ulong_t)&bxt_info },
 	{ "80860AC2", (kernel_ulong_t)&bxt_info },
 	/* APL */
-	{ "80865AAC", (kernel_ulong_t)&bxt_i2c_info },
+	{ "80865AAC", (kernel_ulong_t)&apl_i2c_info },
 	{ "80865ABC", (kernel_ulong_t)&bxt_info },
 	{ "80865AC2", (kernel_ulong_t)&bxt_info },
 	{ }

drivers/mfd/intel-lpss-pci.c +20 -8

index d19569a0f2f9..3228fd182a99 100644
@@ -111,6 +111,18 @@ static const struct intel_lpss_platform_info bxt_i2c_info = {
 	.properties = bxt_i2c_properties,
 };
 
+static struct property_entry apl_i2c_properties[] = {
+	PROPERTY_ENTRY_U32("i2c-sda-hold-time-ns", 207),
+	PROPERTY_ENTRY_U32("i2c-sda-falling-time-ns", 171),
+	PROPERTY_ENTRY_U32("i2c-scl-falling-time-ns", 208),
+	{ },
+};
+
+static const struct intel_lpss_platform_info apl_i2c_info = {
+	.clk_rate = 133000000,
+	.properties = apl_i2c_properties,
+};
+
 static const struct intel_lpss_platform_info kbl_info = {
 	.clk_rate = 120000000,
 };

@@ -159,14 +171,14 @@ static const struct pci_device_id intel_lpss_pci_ids[] = {
 	{ PCI_VDEVICE(INTEL, 0x1aee), (kernel_ulong_t)&bxt_uart_info },
 
 	/* APL */
-	{ PCI_VDEVICE(INTEL, 0x5aac), (kernel_ulong_t)&bxt_i2c_info },
-	{ PCI_VDEVICE(INTEL, 0x5aae), (kernel_ulong_t)&bxt_i2c_info },
-	{ PCI_VDEVICE(INTEL, 0x5ab0), (kernel_ulong_t)&bxt_i2c_info },
-	{ PCI_VDEVICE(INTEL, 0x5ab2), (kernel_ulong_t)&bxt_i2c_info },
-	{ PCI_VDEVICE(INTEL, 0x5ab4), (kernel_ulong_t)&bxt_i2c_info },
-	{ PCI_VDEVICE(INTEL, 0x5ab6), (kernel_ulong_t)&bxt_i2c_info },
-	{ PCI_VDEVICE(INTEL, 0x5ab8), (kernel_ulong_t)&bxt_i2c_info },
-	{ PCI_VDEVICE(INTEL, 0x5aba), (kernel_ulong_t)&bxt_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x5aac), (kernel_ulong_t)&apl_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x5aae), (kernel_ulong_t)&apl_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x5ab0), (kernel_ulong_t)&apl_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x5ab2), (kernel_ulong_t)&apl_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x5ab4), (kernel_ulong_t)&apl_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x5ab6), (kernel_ulong_t)&apl_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x5ab8), (kernel_ulong_t)&apl_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x5aba), (kernel_ulong_t)&apl_i2c_info },
 	{ PCI_VDEVICE(INTEL, 0x5abc), (kernel_ulong_t)&bxt_uart_info },
 	{ PCI_VDEVICE(INTEL, 0x5abe), (kernel_ulong_t)&bxt_uart_info },
 	{ PCI_VDEVICE(INTEL, 0x5ac0), (kernel_ulong_t)&bxt_uart_info },

Signature · 4 lines

Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog