staging: slicoss: Fix multiple checkpatch warnings
cover staging: slicoss: Fix multiple checkpatch warnings
Fixes multiple checkpatch.pl warnings in slicoss driver.
Rehas Sachdeva (5):
staging: slicoss: Fix alignment with open parentheses
staging: slicoss: Remove blank lines before & after braces
staging: slicoss: Add {} to an arm of if-else
staging: slicoss: Remove unnecessary braces {}
staging: slicoss: Remove unnecessary blank line
drivers/staging/slicoss/slicoss.c | 40 ++++++++++++++++++--------------------- 1 file changed, 18 insertions(+), 22 deletions(-)
Signature · 1 line
2.7.4
PATCH 1/5 staging: slicoss: Fix alignment with open parentheses
Align statements following a line with open parentheses to start after the '('. Issue detected by checkpatch.pl.
--- drivers/staging/slicoss/slicoss.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-)
drivers/staging/slicoss/slicoss.c +14 -14
@@ -191,7 +191,7 @@ static void slic_timer_ping(ulong dev)* */ static void slic_link_config (struct adapter *adapter, -u32 linkspeed,u32 linkduplex) +u32 linkspeed,u32 linkduplex) {u32 speed;u32 duplex;
@@ -707,7 +707,7 @@ static void slic_config_clear(struct adapter *adapter) }static bool slic_mac_filter (struct adapter *adapter, -struct ether_header *ether_frame) +struct ether_header *ether_frame) {struct net_device *netdev = adapter->netdev;u32 opts = adapter->macopts;
@@ -830,10 +830,10 @@ static void slic_timer_load_check(ulong cardaddr) }static int slic_upr_queue_request (struct adapter *adapter, -u32 upr_request, -u32 upr_data, -u32 upr_data_h, -u32 upr_buffer,u32 upr_buffer_h) +u32 upr_request, +u32 upr_data, +u32 upr_data_h, +u32 upr_buffer,u32 upr_buffer_h) {struct slic_upr *upr;struct slic_upr *uprqueue;
@@ -899,19 +899,19 @@ static void slic_upr_start(struct adapter *adapter) }static int slic_upr_request (struct adapter *adapter, -u32 upr_request, -u32 upr_data, -u32 upr_data_h, -u32 upr_buffer,u32 upr_buffer_h) +u32 upr_request, +u32 upr_data, +u32 upr_data_h, +u32 upr_buffer,u32 upr_buffer_h) {unsigned long flags;int rc;spin_lock_irqsave (&adapter->upr_lock, flags); rc =slic_upr_queue_request (adapter, - upr_request, - upr_data, - upr_data_h, upr_buffer, upr_buffer_h); + upr_request, + upr_data, + upr_data_h, upr_buffer, upr_buffer_h);if (rc) goto err_unlock_irq;
@@ -1421,7 +1421,7 @@ retry: }static void slic_cmdq_putdone_irq (struct adapter *adapter, -struct slic_hostcmd *cmd) +struct slic_hostcmd *cmd) {struct slic_cmdqueue *cmdq = &adapter->cmdq_done;
Signature · 1 line
2.7.4
Re: [Outreachy kernel] [PATCH 1/5] staging: slicoss: Fix alignment with open parentheses
Quoted 32 lines · Rehas Sachdeva
Align statements following a line with open parentheses to start after the '('. Issue detected by checkpatch.pl.
Signed-off-by Rehas Sachdeva <[email protected]>--- drivers/staging/slicoss/slicoss.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-)drivers/staging/slicoss/slicoss.c +2
-2@@ -191,7 +191,7 @@ static void slic_timer_ping(ulong dev)* */ static void slic_link_config (struct adapter *adapter, -u32 linkspeed,u32 linkduplex) +u32 linkspeed,u32 linkduplex) {u32 speed;u32 duplex;@@ -707,7 +707,7 @@ static void slic_config_clear(struct adapter *adapter) }static bool slic_mac_filter (struct adapter *adapter, -struct ether_header *ether_frame) +struct ether_header *ether_frame) {struct net_device *netdev = adapter->netdev;u32 opts = adapter->macopts;@@ -830,10 +830,10 @@ static void slic_timer_load_check(ulong cardaddr) }
drivers/staging/slicoss/slicoss.c static void slic_timer_load_check(ulong cardaddr) · line 836
Quoted 10 lines
drivers/staging/slicoss/slicoss.c +4
-4static int slic_upr_queue_request (struct adapter *adapter, -u32 upr_request, -u32 upr_data, -u32 upr_data_h, -u32 upr_buffer,u32 upr_buffer_h) +u32 upr_request, +u32 upr_data, +u32 upr_data_h, +u32 upr_buffer,u32 upr_buffer_h)
Maybe you could put a few more arguments on the same line. For example, since upr_buffer and upr_buffer_h are already on the same line, maybe you could do the same with upr_data and upr_data_h.
Quoted 5 lines
drivers/staging/slicoss/slicoss.c +0
-0{struct slic_upr *upr;struct slic_upr *uprqueue;@@ -899,19 +899,19 @@ static void slic_upr_start(struct adapter *adapter) }
drivers/staging/slicoss/slicoss.c static void slic_upr_start(struct adapter *adapter) · line 905
Quoted 10 lines
drivers/staging/slicoss/slicoss.c +4
-4static int slic_upr_request (struct adapter *adapter, -u32 upr_request, -u32 upr_data, -u32 upr_data_h, -u32 upr_buffer,u32 upr_buffer_h) +u32 upr_request, +u32 upr_data, +u32 upr_data_h, +u32 upr_buffer,u32 upr_buffer_h)
Likewise here.
julia
Quoted 34 lines
drivers/staging/slicoss/slicoss.c +4
-5{unsigned long flags;int rc;spin_lock_irqsave (&adapter->upr_lock, flags); rc =slic_upr_queue_request (adapter, - upr_request, - upr_data, - upr_data_h, upr_buffer, upr_buffer_h); + upr_request, + upr_data, + upr_data_h, upr_buffer, upr_buffer_h);if (rc) goto err_unlock_irq;@@ -1421,7 +1421,7 @@ retry: }static void slic_cmdq_putdone_irq (struct adapter *adapter, -struct slic_hostcmd *cmd) +struct slic_hostcmd *cmd) {struct slic_cmdqueue *cmdq = &adapter->cmdq_done; --2.7.4
--
You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected].
To post to this group, send email to [email protected].
To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/a0e1623587ce0b842607142663aa65d7871245cc.1473966683.git.aquannie%40gmail.com.
For more options, visit https://groups.google.com/d/optout.
Re: [Outreachy kernel] [PATCH 1/5] staging: slicoss: Fix alignment with open parentheses
Quoted 37 lines · Julia Lawall
Quoted 33 lines · Rehas Sachdeva
Align statements following a line with open parentheses to start after the '('. Issue detected by checkpatch.pl.
Signed-off-by Rehas Sachdeva <[email protected]>--- drivers/staging/slicoss/slicoss.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-)drivers/staging/slicoss/slicoss.c +2
-2@@ -191,7 +191,7 @@ static void slic_timer_ping(ulong dev)* */ static void slic_link_config (struct adapter *adapter, -u32 linkspeed,u32 linkduplex) +u32 linkspeed,u32 linkduplex) {u32 speed;u32 duplex;@@ -707,7 +707,7 @@ static void slic_config_clear(struct adapter *adapter) }static bool slic_mac_filter (struct adapter *adapter, -struct ether_header *ether_frame) +struct ether_header *ether_frame) {struct net_device *netdev = adapter->netdev;u32 opts = adapter->macopts;@@ -830,10 +830,10 @@ static void slic_timer_load_check(ulong cardaddr) }
Quoted 14 lines
drivers/staging/slicoss/slicoss.c static void slic_timer_load_check(ulong cardaddr) · line 836
Quoted 9 lines
drivers/staging/slicoss/slicoss.c +4
-4static int slic_upr_queue_request (struct adapter *adapter, -u32 upr_request, -u32 upr_data, -u32 upr_data_h, -u32 upr_buffer,u32 upr_buffer_h) +u32 upr_request, +u32 upr_data, +u32 upr_data_h, +u32 upr_buffer,u32 upr_buffer_h)Maybe you could put a few more arguments on the same line. For example, since
upr_bufferandupr_buffer_hare already on the same line, maybe you could do the same withupr_dataandupr_data_h.
I see. I'll make the changes right away. Thanks for pointing out.
Rehas
Quoted 55 lines
Quoted 5 lines
drivers/staging/slicoss/slicoss.c +0
-0{struct slic_upr *upr;struct slic_upr *uprqueue;@@ -899,19 +899,19 @@ static void slic_upr_start(struct adapter *adapter) }drivers/staging/slicoss/slicoss.c static void slic_upr_start(struct adapter *adapter) · line 905
Quoted 10 lines
drivers/staging/slicoss/slicoss.c +4
-4static int slic_upr_request (struct adapter *adapter, -u32 upr_request, -u32 upr_data, -u32 upr_data_h, -u32 upr_buffer,u32 upr_buffer_h) +u32 upr_request, +u32 upr_data, +u32 upr_data_h, +u32 upr_buffer,u32 upr_buffer_h)Likewise here.
julia
Quoted 34 lines
drivers/staging/slicoss/slicoss.c +4
-5{unsigned long flags;int rc;spin_lock_irqsave (&adapter->upr_lock, flags); rc =slic_upr_queue_request (adapter, - upr_request, - upr_data, - upr_data_h, upr_buffer, upr_buffer_h); + upr_request, + upr_data, + upr_data_h, upr_buffer, upr_buffer_h);if (rc) goto err_unlock_irq;@@ -1421,7 +1421,7 @@ retry: }static void slic_cmdq_putdone_irq (struct adapter *adapter, -struct slic_hostcmd *cmd) +struct slic_hostcmd *cmd) {struct slic_cmdqueue *cmdq = &adapter->cmdq_done; --2.7.4
--
You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected].
To post to this group, send email to [email protected].
To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/a0e1623587ce0b842607142663aa65d7871245cc.1473966683.git.aquannie%40gmail.com.
For more options, visit https://groups.google.com/d/optout.
PATCH 2/5 staging: slicoss: Remove blank lines before & after braces
In reply to Rehas SachdevaRemoves unnecessary blank lines after an opening brace '{' and before a closing brace '}'. Issue detected by checkpatch.pl.
--- drivers/staging/slicoss/slicoss.c | 3 --- 1 file changed, 3 deletions(-)
drivers/staging/slicoss/slicoss.c +0 -3
@@ -514,7 +514,6 @@ static int slic_card_download(struct adapter *adapter)slic_write32 (adapter,SLIC_REG_WCS , instruction); instruction = *(u32 *)(fw->data + index); index +=4 ; - } }release_firmware (fw);
@@ -2718,7 +2717,6 @@ static int slic_card_init(struct sliccard *card, struct adapter *adapter)/* see if the EEPROM is valid by checking it's checksum */ if ((eecodesize <=MAX_EECODE_SIZE ) && (eecodesize >=MIN_EECODE_SIZE )) { - ee_chksum = *(u16 *)((char *)peeprom + (eecodesize -2 ));/*
@@ -2856,7 +2854,6 @@ static int slic_init_adapter(struct net_device *netdev,*/ for (index =1 , pslic_handle = &adapter->slic_handles[1 ]; index <SLIC_CMDQ_MAXCMDS ; index++, pslic_handle++) { - pslic_handle->token.handle_index = index; pslic_handle->type =SLIC_HANDLE_FREE ; pslic_handle->next = adapter->pfree_slic_handles;
Signature · 1 line
2.7.4
PATCH 3/5 staging: slicoss: Add {} to an arm of if-else
In reply to Rehas SachdevaAdds braces {} to the if arm of an if-else statement which has braces {} on its else arm. This improves uniformity and readability. Issue detected by checkpatch.
--- drivers/staging/slicoss/slicoss.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/staging/slicoss/slicoss.c +2 -1
@@ -784,8 +784,9 @@ static void slic_timer_load_check(ulong cardaddr)if ((adapter) && (adapter->state ==ADAPT_UP ) && (card->state ==CARD_UP ) && (slic_global.dynamic_intagg)) {if (adapter->devid ==SLIC_1GB_DEVICE_ID ) { -if (adapter->linkspeed ==LINK_1000MB ) +if (adapter->linkspeed ==LINK_1000MB ) { level =100 ; + }else {if (load >SLIC_LOAD_5 ) level =SLIC_INTAGG_5 ;
Signature · 1 line
2.7.4
Greg Kroah-Hartman
maintainerRe: [Outreachy kernel] [PATCH 3/5] staging: slicoss: Add {} to an arm of if-else
Quoted 14 lines · Rehas Sachdeva
Adds braces {} to the if arm of an if-else statement which has braces {} on its else arm. This improves uniformity and readability. Issue detected by checkpatch.
Signed-off-by Rehas Sachdeva <[email protected]>--- drivers/staging/slicoss/slicoss.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)drivers/staging/slicoss/slicoss.c +0
-0
drivers/staging/slicoss/slicoss.c static void slic_timer_load_check(ulong cardaddr) · line 790
Quoted 8 lines
drivers/staging/slicoss/slicoss.c +2
-1@@ -784,8 +784,9 @@ static void slic_timer_load_check(ulong cardaddr)if ((adapter) && (adapter->state ==ADAPT_UP ) && (card->state ==CARD_UP ) && (slic_global.dynamic_intagg)) {if (adapter->devid ==SLIC_1GB_DEVICE_ID ) { -if (adapter->linkspeed ==LINK_1000MB ) +if (adapter->linkspeed ==LINK_1000MB ) { level =100 ; + }else {
This line should be:
} else {thanks,
greg k-h
PATCH 4/5 staging: slicoss: Remove unnecessary braces {}
In reply to Rehas SachdevaRemoves unnecessary braces {} on both arms of an if-else block as they have a single statement each. Issue detected by checkpatch.
--- drivers/staging/slicoss/slicoss.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/staging/slicoss/slicoss.c +2 -3
@@ -1631,11 +1631,10 @@ static u32 slic_rcvqueue_reinsert(struct adapter *adapter, struct sk_buff *skb)dev_err (dev," rcvq->tail[%p]\n" , rcvq->tail);dev_err (dev," rcvq->count[%x]\n" , rcvq->count); } -if (paddrh ==0 ) { +if (paddrh ==0 )slic_write32 (adapter,SLIC_REG_HBAR , (u32 )paddrl); - }else { +else slic_write64 (adapter,SLIC_REG_HBAR64 , paddrl, paddrh); - }if (rcvq->head) rcvq->tail->next = skb;else
Signature · 1 line
2.7.4
PATCH 5/5 staging: slicoss: Remove unnecessary blank line
In reply to Rehas SachdevaRemoves unnecessary blank line detected by checkpatch.
--- drivers/staging/slicoss/slicoss.c | 1 - 1 file changed, 1 deletion(-)
drivers/staging/slicoss/slicoss.c +0 -1
@@ -1660,7 +1660,6 @@ static int slic_link_event_handler(struct adapter *adapter)struct slic_shmemory *sm = &adapter->shmem;dma_addr_t phaddr = sm->lnkstatus_phaddr; -if (adapter->state !=ADAPT_UP ) {/* Adapter is not operational. Ignore. */ return -ENODEV ;
Signature · 1 line
2.7.4