Kconfig: Move CONFIG_SPL_..._SUPPORT to Kconfig
Subsystems (15)
PATCH v3 36/45 Convert CONFIG_SPL_POWER_SUPPORT to Kconfig
In reply to Simon GlassMove this option to Kconfig and tidy up existing uses.
Signed-off-by Simon Glass <[email protected]>
---
Changes in v3: None
Changes in v2: None
arch/arm/cpu/armv7/omap3/Kconfig | 3 +++ arch/arm/cpu/armv7/omap4/Kconfig | 3 +++ arch/arm/cpu/armv7/omap5/Kconfig | 3 +++ board/sunxi/Kconfig | 3 +++ board/ti/common/Kconfig | 3 +++ configs/am335x_baltos_defconfig | 3 ++- configs/am335x_evm_defconfig | 1 - configs/am335x_evm_nor_defconfig | 1 - configs/am335x_evm_usbspl_defconfig | 1 - configs/am335x_igep0033_defconfig | 3 ++- configs/am335x_shc_defconfig | 1 + configs/am335x_shc_ict_defconfig | 1 + configs/am335x_shc_netboot_defconfig | 1 + configs/am335x_shc_prompt_defconfig | 1 + configs/am335x_shc_sdboot_defconfig | 1 + configs/am335x_shc_sdboot_prompt_defconfig | 1 + configs/am335x_sl50_defconfig | 1 + configs/am3517_evm_defconfig | 1 - configs/am43xx_evm_defconfig | 1 - configs/am43xx_evm_ethboot_defconfig | 1 - configs/am43xx_evm_usbhost_boot_defconfig | 1 - configs/am43xx_hs_evm_defconfig | 1 - configs/birdland_bav335a_defconfig | 1 + configs/birdland_bav335b_defconfig | 1 + configs/brppt1_mmc_defconfig | 1 + configs/brppt1_nand_defconfig | 3 ++- configs/brppt1_spi_defconfig | 1 + configs/brxre1_defconfig | 1 + configs/cairo_defconfig | 1 - configs/chromebook_jerry_defconfig | 1 + configs/cm_t335_defconfig | 3 ++- configs/cm_t43_defconfig | 1 + configs/gwventana_defconfig | 1 + configs/igep0020_defconfig | 1 - configs/igep0030_defconfig | 1 - configs/igep0030_nand_defconfig | 1 - configs/igep0032_defconfig | 1 - configs/k2e_evm_defconfig | 1 + configs/k2g_evm_defconfig | 1 + configs/k2hk_evm_defconfig | 1 + configs/k2l_evm_defconfig | 1 + configs/omap3_beagle_defconfig | 1 - configs/omap3_logic_defconfig | 1 - configs/omap3_overo_defconfig | 1 - configs/pcm051_rev1_defconfig | 1 + configs/pcm051_rev3_defconfig | 1 + configs/pengwyn_defconfig | 3 ++- configs/pepper_defconfig | 1 + include/configs/am335x_evm.h | 1 - include/configs/am335x_shc.h | 1 - include/configs/am335x_sl50.h | 1 - include/configs/am3517_crane.h | 1 - include/configs/am3517_evm.h | 1 - include/configs/am43xx_evm.h | 1 - include/configs/baltos.h | 1 - include/configs/bav335x.h | 1 - include/configs/bur_am335x_common.h | 1 - include/configs/chromebook_jerry.h | 2 -- include/configs/cm_t35.h | 1 - include/configs/cm_t43.h | 2 -- include/configs/gw_ventana.h | 1 - include/configs/kc1.h | 1 - include/configs/mcx.h | 1 - include/configs/omap3_evm.h | 1 - include/configs/pengwyn.h | 1 - include/configs/sniper.h | 1 - include/configs/sunxi-common.h | 1 - include/configs/tam3517-common.h | 1 - include/configs/tao3530.h | 1 - include/configs/ti_armv7_common.h | 1 - include/configs/ti_omap3_common.h | 1 - include/configs/tricorder.h | 1 - 72 files changed, 47 insertions(+), 47 deletions(-)
arch/arm/cpu/armv7/omap3/Kconfig +3 -0
@@ -27,6 +27,9 @@ config SPL_MMC_SUPPORT config SPL_NAND_SUPPORT default y +config SPL_POWER_SUPPORT + default y + choice prompt "OMAP3 board select" optional
arch/arm/cpu/armv7/omap4/Kconfig +3 -0
@@ -27,6 +27,9 @@ config SPL_MMC_SUPPORT config SPL_NAND_SUPPORT default y +config SPL_POWER_SUPPORT + default y + choice prompt "OMAP4 board select" optional
arch/arm/cpu/armv7/omap5/Kconfig +3 -0
@@ -27,6 +27,9 @@ config SPL_MMC_SUPPORT config SPL_NAND_SUPPORT default y +config SPL_POWER_SUPPORT + default y + choice prompt "OMAP5 board select" optional
board/sunxi/Kconfig +3 -0
@@ -15,6 +15,9 @@ config SPL_LIBGENERIC_SUPPORT config SPL_MMC_SUPPORT default y +config SPL_POWER_SUPPORT + default y + # Note only one of these may be selected at a time! But hidden choices are # not supported by Kconfig config SUNXI_GEN_SUN4I
board/ti/common/Kconfig +3 -0
@@ -33,3 +33,6 @@ config SPL_MMC_SUPPORT config SPL_NAND_SUPPORT default y + +config SPL_POWER_SUPPORT + default y
configs/am335x_baltos_defconfig +2 -1
@@ -8,6 +8,8 @@ CONFIG_SPL_FAT_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_FIT=y CONFIG_FIT_VERBOSE=y
@@ -17,7 +19,6 @@ CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y CONFIG_SPL_STACK_R=y CONFIG_SPL_MTD_SUPPORT=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set
configs/am335x_evm_defconfig +0 -1
@@ -10,7 +10,6 @@ CONFIG_SPL=y CONFIG_SPL_STACK_R=y CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_MUSB_NEW_SUPPORT=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set
configs/am335x_evm_nor_defconfig +0 -1
@@ -9,7 +9,6 @@ CONFIG_SPL=y CONFIG_SPL_STACK_R=y CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_MUSB_NEW_SUPPORT=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set
configs/am335x_evm_usbspl_defconfig +0 -1
@@ -8,7 +8,6 @@ CONFIG_SPL=y CONFIG_SPL_STACK_R=y CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_MUSB_NEW_SUPPORT=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_NET_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y
configs/am335x_igep0033_defconfig +2 -1
@@ -8,12 +8,13 @@ CONFIG_SPL_FAT_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y CONFIG_SPL_STACK_R=y CONFIG_SPL_MTD_SUPPORT=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set
configs/am335x_shc_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_SPL_FAT_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_POWER_SUPPORT=y CONFIG_SERIES=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_FIT=y
configs/am335x_shc_ict_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_SPL_FAT_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_POWER_SUPPORT=y CONFIG_SHC_ICT=y CONFIG_SERIES=y CONFIG_SPL_STACK_R_ADDR=0x82000000
configs/am335x_shc_netboot_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_SPL_FAT_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SHC_NETBOOT=y CONFIG_SERIES=y
configs/am335x_shc_prompt_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_SPL_FAT_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_POWER_SUPPORT=y CONFIG_SERIES=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_FIT=y
configs/am335x_shc_sdboot_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_SPL_FAT_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_POWER_SUPPORT=y CONFIG_SHC_SDBOOT=y CONFIG_SERIES=y CONFIG_SPL_STACK_R_ADDR=0x82000000
configs/am335x_shc_sdboot_prompt_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_SPL_FAT_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_POWER_SUPPORT=y CONFIG_SHC_SDBOOT=y CONFIG_SERIES=y CONFIG_SPL_STACK_R_ADDR=0x82000000
configs/am335x_sl50_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_SPL_FAT_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_FIT=y
configs/am3517_evm_defconfig +0 -1
@@ -9,7 +9,6 @@ CONFIG_BOOTDELAY=10 CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y CONFIG_SPL_MTD_SUPPORT=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="AM3517_EVM # " CONFIG_CMD_BOOTZ=y
configs/am43xx_evm_defconfig +0 -1
@@ -10,7 +10,6 @@ CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y CONFIG_SPL_STACK_R=y CONFIG_SPL_MTD_SUPPORT=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set
configs/am43xx_evm_ethboot_defconfig +0 -1
@@ -6,7 +6,6 @@ CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y CONFIG_SPL_ETH_SUPPORT=y CONFIG_SPL_MTD_SUPPORT=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_NET_SUPPORT=y CONFIG_SPL_NET_VCI_STRING="AM43xx U-Boot SPL" CONFIG_HUSH_PARSER=y
configs/am43xx_evm_usbhost_boot_defconfig +0 -1
@@ -11,7 +11,6 @@ CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y CONFIG_SPL_STACK_R=y CONFIG_SPL_MTD_SUPPORT=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set
configs/am43xx_hs_evm_defconfig +0 -1
@@ -14,7 +14,6 @@ CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y CONFIG_SPL_STACK_R=y CONFIG_SPL_MTD_SUPPORT=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set
configs/birdland_bav335a_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_SPL_FAT_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_POWER_SUPPORT=y CONFIG_BAV_VERSION=1 CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1"
configs/birdland_bav335b_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_SPL_FAT_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_POWER_SUPPORT=y CONFIG_BAV_VERSION=2 CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1"
configs/brppt1_mmc_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_POWER_SUPPORT=y CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,EMMC_BOOT" CONFIG_BOOTDELAY=-2
configs/brppt1_nand_defconfig +2 -1
@@ -4,12 +4,13 @@ CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_POWER_SUPPORT=y CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND" CONFIG_BOOTDELAY=-2 CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set
configs/brppt1_spi_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_POWER_SUPPORT=y CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,SPI_BOOT,EMMC_BOOT" CONFIG_SPI_BOOT=y
configs/brxre1_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_POWER_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1" CONFIG_BOOTDELAY=-2 CONFIG_VERSION_VARIABLE=y
configs/cairo_defconfig +0 -1
@@ -5,7 +5,6 @@ CONFIG_BOOTDELAY=-2 CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y CONFIG_SPL_MTD_SUPPORT=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Cairo # " CONFIG_CMD_BOOTZ=y
configs/chromebook_jerry_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_ARCH_ROCKCHIP=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_SPL_I2C_SUPPORT=y # CONFIG_SPL_MMC_SUPPORT is not set +CONFIG_SPL_POWER_SUPPORT=y CONFIG_ROCKCHIP_RK3288=y CONFIG_TARGET_CHROMEBOOK_JERRY=y CONFIG_ROCKCHIP_FAST_SPL=y
configs/cm_t335_defconfig +2 -1
@@ -8,10 +8,11 @@ CONFIG_SPL_FAT_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_POWER_SUPPORT=y CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y CONFIG_SPL_MTD_SUPPORT=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="CM-T335 # " CONFIG_CMD_BOOTZ=y
configs/cm_t43_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_FAT_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_POWER_SUPPORT=y CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y CONFIG_SPL_MTD_SUPPORT=y
configs/gwventana_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_TARGET_GW_VENTANA=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_STACK_R_ADDR=0x18000000 CONFIG_DM_SERIAL=y CONFIG_FIT=y
configs/igep0020_defconfig +0 -1
@@ -7,7 +7,6 @@ CONFIG_BOOTDELAY=3 CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y CONFIG_SPL_MTD_SUPPORT=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_ONENAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y
configs/igep0030_defconfig +0 -1
@@ -6,7 +6,6 @@ CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_ONENAND" CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y CONFIG_SPL_MTD_SUPPORT=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_ONENAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y
configs/igep0030_nand_defconfig +0 -1
@@ -6,7 +6,6 @@ CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_NAND" CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y CONFIG_SPL_MTD_SUPPORT=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_ONENAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y
configs/igep0032_defconfig +0 -1
@@ -6,7 +6,6 @@ CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_IGEP0032,BOOT_ONENAND" CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y CONFIG_SPL_MTD_SUPPORT=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_ONENAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y
configs/k2e_evm_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_TARGET_K2E_EVM=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_POWER_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="k2e-evm" CONFIG_OF_BOARD_SETUP=y CONFIG_VERSION_VARIABLE=y
configs/k2g_evm_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_TARGET_K2G_EVM=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_POWER_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="k2g-evm" CONFIG_OF_BOARD_SETUP=y CONFIG_VERSION_VARIABLE=y
configs/k2hk_evm_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_TARGET_K2HK_EVM=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_POWER_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="k2hk-evm" CONFIG_OF_BOARD_SETUP=y CONFIG_VERSION_VARIABLE=y
configs/k2l_evm_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_TARGET_K2L_EVM=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_POWER_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="k2l-evm" CONFIG_OF_BOARD_SETUP=y CONFIG_VERSION_VARIABLE=y
configs/omap3_beagle_defconfig +0 -1
@@ -5,7 +5,6 @@ CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y CONFIG_SPL_MTD_SUPPORT=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set
configs/omap3_logic_defconfig +0 -1
@@ -6,7 +6,6 @@ CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y CONFIG_SPL_MTD_SUPPORT=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="OMAP Logic # " CONFIG_CMD_BOOTZ=y
configs/omap3_overo_defconfig +0 -1
@@ -4,7 +4,6 @@ CONFIG_TARGET_OMAP3_OVERO=y CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y CONFIG_SPL_MTD_SUPPORT=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Overo # " CONFIG_CMD_BOOTZ=y
configs/pcm051_rev1_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_SPL_FAT_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="REV1" CONFIG_VERSION_VARIABLE=y
configs/pcm051_rev3_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_SPL_FAT_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="REV3" CONFIG_VERSION_VARIABLE=y
configs/pengwyn_defconfig +2 -1
@@ -8,12 +8,13 @@ CONFIG_SPL_FAT_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y CONFIG_SPL_ETH_SUPPORT=y CONFIG_SPL_MTD_SUPPORT=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_NET_SUPPORT=y CONFIG_SPL_NET_VCI_STRING="AM335x U-Boot SPL" CONFIG_HUSH_PARSER=y
configs/pepper_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_SPL_FAT_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL=y CONFIG_VERSION_VARIABLE=y CONFIG_HUSH_PARSER=y
include/configs/am335x_evm.h +0 -1
@@ -206,7 +206,6 @@/* SPL */ #ifndef CONFIG_NOR_BOOT -#define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SPL_YMODEM_SUPPORT /* Bootcount using the RTC block */
include/configs/am335x_shc.h +0 -1
@@ -279,7 +279,6 @@#define CONFIG_POWER_TPS65217 /* SPL */ -#define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SPL_YMODEM_SUPPORT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"
include/configs/am335x_sl50.h +0 -1
@@ -80,7 +80,6 @@#define CONFIG_POWER_TPS65910 /* SPL */ -#define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SPL_YMODEM_SUPPORT /* Bootcount using the RTC block */
include/configs/am3517_crane.h +0 -1
@@ -291,7 +291,6 @@#define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC -#define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"/* NAND boot config */
include/configs/am3517_evm.h +0 -1
@@ -348,7 +348,6 @@#define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC -#define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"#endif /* __CONFIG_H */
include/configs/am43xx_evm.h +0 -1
@@ -39,7 +39,6 @@#define CONFIG_SPL_TEXT_BASE CONFIG_ISW_ENTRY_ADDR#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ (128 << 20)) -#define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SPL_YMODEM_SUPPORT /* Enabling L2 Cache */
include/configs/baltos.h +0 -1
@@ -217,7 +217,6 @@/* SPL */ #ifndef CONFIG_NOR_BOOT -#define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SPL_YMODEM_SUPPORT /* Bootcount using the RTC block */
include/configs/bav335x.h +0 -1
@@ -350,7 +350,6 @@ DEFAULT_LINUX_BOOT_ENV \/* SPL */ #ifndef CONFIG_NOR_BOOT -#define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SPL_YMODEM_SUPPORT /* Bootcount using the RTC block */
include/configs/bur_am335x_common.h +0 -1
@@ -21,7 +21,6 @@#define CONFIG_SYS_PTV 2/* Divisor: 2^(PTV+1) => 8 */ #define CONFIG_SYS_TIMERBASE 0x48040000/* Use Timer2 */ #define CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC /* enable 32kHz OSC at bootime */ -#define CONFIG_SPL_POWER_SUPPORT #define CONFIG_POWER_TPS65217 #define CONFIG_SYS_NO_FLASH /* have no NOR-flash */
include/configs/chromebook_jerry.h +0 -2
@@ -24,8 +24,6 @@#define CONFIG_KEYBOARD -#define CONFIG_SPL_POWER_SUPPORT -#define CONFIG_SYS_WHITE_ON_BLACK #define CONFIG_CONSOLE_SCROLL_LINES 10
include/configs/cm_t35.h +0 -1
@@ -310,7 +310,6 @@#define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC -#define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SPL_OMAP3_ID_NAND #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
include/configs/cm_t43.h +0 -2
@@ -151,14 +151,12 @@/* SPL defines. */ #define CONFIG_SPL_TEXT_BASE 0x40300350#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + (128 << 20)) -#define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SYS_SPI_U_BOOT_OFFS (256 * 1024)#define CONFIG_SYS_MONITOR_LEN (512 * 1024)#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x480#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_POWER_SUPPORT /* EEPROM */ #define CONFIG_CMD_EEPROM
include/configs/gw_ventana.h +0 -1
@@ -9,7 +9,6 @@/* SPL */ #define CONFIG_SPL_BOARD_INIT -#define CONFIG_SPL_POWER_SUPPORT /* Location in NAND to read U-Boot from */ #define CONFIG_SYS_NAND_U_BOOT_OFFS (14 * SZ_1M)
include/configs/kc1.h +0 -1
@@ -130,7 +130,6 @@#define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 2
include/configs/mcx.h +0 -1
@@ -321,7 +321,6 @@#define CONFIG_SPL_NAND_SIMPLE #define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC
include/configs/omap3_evm.h +0 -1
@@ -347,7 +347,6 @@#define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SPL_OMAP3_ID_NAND #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
include/configs/pengwyn.h +0 -1
@@ -114,7 +114,6 @@#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2/* SPL */ -#define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SPL_YMODEM_SUPPORT /* NAND support */
include/configs/sniper.h +0 -1
@@ -138,7 +138,6 @@#define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 2
include/configs/sunxi-common.h +0 -1
@@ -256,7 +256,6 @@ extern int soft_i2c_gpio_scl;#if definedCONFIG_AXP152_POWER || definedCONFIG_AXP209_POWER || \ definedCONFIG_AXP221_POWER || definedCONFIG_AXP818_POWER || \ definedCONFIG_SY8106A_POWER -#define CONFIG_SPL_POWER_SUPPORT #endif #ifndef CONFIG_CONS_INDEX
include/configs/tam3517-common.h +0 -1
@@ -202,7 +202,6 @@#define CONFIG_SPL_NAND_WORKSPACE 0x8f07f000/* below BSS */ #define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC
include/configs/tao3530.h +0 -1
@@ -292,7 +292,6 @@#define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC -#define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SPL_OMAP3_ID_NAND #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
include/configs/ti_armv7_common.h +0 -1
@@ -264,7 +264,6 @@/* General parts of the framework, required. */ #define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SPL_BOARD_INIT #ifdef CONFIG_NAND
include/configs/ti_omap3_common.h +0 -1
@@ -69,7 +69,6 @@/* SPL */ #define CONFIG_SPL_TEXT_BASE 0x40200800#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" -#define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ (64 << 20))
include/configs/tricorder.h +0 -1
@@ -320,7 +320,6 @@#define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC
Signature · 1 line
2.8.0.rc3.226.g39d4020
PATCH v3 36/45 Convert CONFIG_SPL_POWER_SUPPORT to Kconfig
Quoted 3 lines · Simon Glass
Move this option to
Kconfigand tidy up existing uses.Signed-off-by Simon Glass <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160918/f822b1b4/attachment.sig>
PATCH v3 37/45 Convert CONFIG_SPL_SATA_SUPPORT to Kconfig
In reply to Simon GlassMove this option to Kconfig and tidy up existing uses.
Signed-off-by Simon Glass <[email protected]>
---
Changes in v3: None
Changes in v2: None
configs/cm_t54_defconfig | 1 + include/configs/cm_t54.h | 1 - 2 files changed, 1 insertion(+), 1 deletion(-)
configs/cm_t54_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=3 CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y +CONFIG_SPL_SATA_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="CM-T54 # " CONFIG_CMD_BOOTZ=y
include/configs/cm_t54.h +0 -1
@@ -56,7 +56,6 @@#define CONFIG_SUPPORT_EMMC_BOOT /* SATA Boot related defines */ -#define CONFIG_SPL_SATA_SUPPORT #define CONFIG_SPL_SATA_BOOT_DEVICE 0#define CONFIG_SYS_SATA_FAT_BOOT_PARTITION 1
Signature · 1 line
2.8.0.rc3.226.g39d4020
PATCH v3 37/45 Convert CONFIG_SPL_SATA_SUPPORT to Kconfig
Quoted 3 lines · Simon Glass
Move this option to
Kconfigand tidy up existing uses.Signed-off-by Simon Glass <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160918/a5ca536e/attachment.sig>
PATCH v3 38/45 Convert CONFIG_SPL_SERIAL_SUPPORT to Kconfig
In reply to Simon GlassMove this option to Kconfig and tidy up existing uses.
Signed-off-by Simon Glass <[email protected]>
---
Changes in v3: None
Changes in v2: None
arch/arm/cpu/armv7/omap3/Kconfig | 3 +++ arch/arm/cpu/armv7/omap4/Kconfig | 3 +++ arch/arm/cpu/armv7/omap5/Kconfig | 3 +++ arch/arm/cpu/armv8/zynqmp/Kconfig | 3 +++ arch/arm/mach-rockchip/rk3036/Kconfig | 3 +++ arch/arm/mach-rockchip/rk3288/Kconfig | 3 +++ arch/arm/mach-socfpga/Kconfig | 3 +++ arch/arm/mach-tegra/Kconfig | 3 +++ arch/arm/mach-uniphier/Kconfig | 3 +++ arch/arm/mach-zynq/Kconfig | 3 +++ board/sunxi/Kconfig | 3 +++ board/ti/common/Kconfig | 3 +++ configs/B4420QDS_NAND_defconfig | 3 ++- configs/B4860QDS_NAND_defconfig | 3 ++- configs/BSC9131RDB_NAND_SYSCLK100_defconfig | 3 ++- configs/BSC9131RDB_NAND_defconfig | 3 ++- configs/BSC9132QDS_NAND_DDRCLK100_defconfig | 3 ++- configs/BSC9132QDS_NAND_DDRCLK133_defconfig | 3 ++- configs/C29XPCIE_NAND_defconfig | 4 +++- configs/MPC8313ERDB_NAND_33_defconfig | 3 ++- configs/MPC8313ERDB_NAND_66_defconfig | 3 ++- configs/P1010RDB-PA_36BIT_NAND_defconfig | 4 +++- configs/P1010RDB-PA_36BIT_SDCARD_defconfig | 1 + configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig | 1 + configs/P1010RDB-PA_NAND_defconfig | 4 +++- configs/P1010RDB-PA_SDCARD_defconfig | 1 + configs/P1010RDB-PA_SPIFLASH_defconfig | 1 + configs/P1010RDB-PB_36BIT_NAND_defconfig | 4 +++- configs/P1010RDB-PB_36BIT_SDCARD_defconfig | 1 + configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig | 1 + configs/P1010RDB-PB_NAND_defconfig | 4 +++- configs/P1010RDB-PB_SDCARD_defconfig | 1 + configs/P1010RDB-PB_SPIFLASH_defconfig | 1 + configs/P1020MBG-PC_36BIT_SDCARD_defconfig | 1 + configs/P1020MBG-PC_SDCARD_defconfig | 1 + configs/P1020RDB-PC_36BIT_NAND_defconfig | 4 +++- configs/P1020RDB-PC_36BIT_SDCARD_defconfig | 1 + configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig | 1 + configs/P1020RDB-PC_NAND_defconfig | 4 +++- configs/P1020RDB-PC_SDCARD_defconfig | 1 + configs/P1020RDB-PC_SPIFLASH_defconfig | 1 + configs/P1020RDB-PD_NAND_defconfig | 4 +++- configs/P1020RDB-PD_SDCARD_defconfig | 1 + configs/P1020RDB-PD_SPIFLASH_defconfig | 1 + configs/P1020UTM-PC_36BIT_SDCARD_defconfig | 1 + configs/P1020UTM-PC_SDCARD_defconfig | 1 + configs/P1021RDB-PC_36BIT_NAND_defconfig | 4 +++- configs/P1021RDB-PC_36BIT_SDCARD_defconfig | 1 + configs/P1021RDB-PC_36BIT_SPIFLASH_defconfig | 1 + configs/P1021RDB-PC_NAND_defconfig | 4 +++- configs/P1021RDB-PC_SDCARD_defconfig | 1 + configs/P1021RDB-PC_SPIFLASH_defconfig | 1 + configs/P1022DS_36BIT_NAND_defconfig | 4 +++- configs/P1022DS_36BIT_SDCARD_defconfig | 1 + configs/P1022DS_36BIT_SPIFLASH_defconfig | 1 + configs/P1022DS_NAND_defconfig | 4 +++- configs/P1022DS_SDCARD_defconfig | 1 + configs/P1022DS_SPIFLASH_defconfig | 1 + configs/P1024RDB_NAND_defconfig | 4 +++- configs/P1024RDB_SDCARD_defconfig | 1 + configs/P1024RDB_SPIFLASH_defconfig | 1 + configs/P1025RDB_NAND_defconfig | 4 +++- configs/P1025RDB_SDCARD_defconfig | 1 + configs/P1025RDB_SPIFLASH_defconfig | 1 + configs/P2020RDB-PC_36BIT_NAND_defconfig | 4 +++- configs/P2020RDB-PC_36BIT_SDCARD_defconfig | 1 + configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig | 1 + configs/P2020RDB-PC_NAND_defconfig | 4 +++- configs/P2020RDB-PC_SDCARD_defconfig | 1 + configs/P2020RDB-PC_SPIFLASH_defconfig | 1 + configs/T1023RDB_NAND_defconfig | 3 ++- configs/T1023RDB_SDCARD_defconfig | 1 + configs/T1023RDB_SPIFLASH_defconfig | 1 + configs/T1024QDS_NAND_defconfig | 3 ++- configs/T1024QDS_SDCARD_defconfig | 1 + configs/T1024QDS_SPIFLASH_defconfig | 1 + configs/T1024RDB_NAND_defconfig | 3 ++- configs/T1024RDB_SDCARD_defconfig | 1 + configs/T1024RDB_SPIFLASH_defconfig | 1 + configs/T1040D4RDB_NAND_defconfig | 3 ++- configs/T1040D4RDB_SDCARD_defconfig | 1 + configs/T1040D4RDB_SPIFLASH_defconfig | 1 + configs/T1040RDB_NAND_defconfig | 3 ++- configs/T1040RDB_SDCARD_defconfig | 1 + configs/T1040RDB_SPIFLASH_defconfig | 1 + configs/T1042D4RDB_NAND_defconfig | 3 ++- configs/T1042D4RDB_SDCARD_defconfig | 1 + configs/T1042D4RDB_SPIFLASH_defconfig | 1 + configs/T1042RDB_PI_NAND_SECURE_BOOT_defconfig | 3 ++- configs/T1042RDB_PI_NAND_defconfig | 3 ++- configs/T1042RDB_PI_SDCARD_defconfig | 1 + configs/T1042RDB_PI_SPIFLASH_defconfig | 1 + configs/T2080QDS_NAND_defconfig | 3 ++- configs/T2080QDS_SDCARD_defconfig | 1 + configs/T2080QDS_SPIFLASH_defconfig | 1 + configs/T2080RDB_NAND_defconfig | 3 ++- configs/T2080RDB_SDCARD_defconfig | 1 + configs/T2080RDB_SPIFLASH_defconfig | 1 + configs/T2081QDS_NAND_defconfig | 3 ++- configs/T2081QDS_SDCARD_defconfig | 1 + configs/T2081QDS_SPIFLASH_defconfig | 1 + configs/T4160QDS_NAND_defconfig | 3 ++- configs/T4160QDS_SDCARD_defconfig | 1 + configs/T4240QDS_NAND_defconfig | 3 ++- configs/T4240QDS_SDCARD_defconfig | 1 + configs/T4240RDB_SDCARD_defconfig | 1 + configs/a3m071_defconfig | 1 + configs/a4m2k_defconfig | 1 + configs/am335x_baltos_defconfig | 1 + configs/am335x_igep0033_defconfig | 1 + configs/am335x_shc_defconfig | 1 + configs/am335x_shc_ict_defconfig | 1 + configs/am335x_shc_netboot_defconfig | 1 + configs/am335x_shc_prompt_defconfig | 1 + configs/am335x_shc_sdboot_defconfig | 1 + configs/am335x_shc_sdboot_prompt_defconfig | 1 + configs/am335x_sl50_defconfig | 1 + configs/apf27_defconfig | 3 ++- configs/apx4devkit_defconfig | 1 + configs/at91sam9m10g45ek_mmc_defconfig | 1 + configs/at91sam9m10g45ek_nandflash_defconfig | 3 ++- configs/at91sam9n12ek_nandflash_defconfig | 3 ++- configs/at91sam9n12ek_spiflash_defconfig | 1 + configs/at91sam9x5ek_nandflash_defconfig | 3 ++- configs/at91sam9x5ek_spiflash_defconfig | 1 + configs/axm_defconfig | 3 ++- configs/bg0900_defconfig | 1 + configs/birdland_bav335a_defconfig | 1 + configs/birdland_bav335b_defconfig | 1 + configs/brppt1_mmc_defconfig | 1 + configs/brppt1_nand_defconfig | 1 + configs/brppt1_spi_defconfig | 1 + configs/brxre1_defconfig | 1 + configs/cgtqmx6eval_defconfig | 1 + configs/clearfog_defconfig | 1 + configs/cm_fx6_defconfig | 1 + configs/cm_t335_defconfig | 1 + configs/cm_t43_defconfig | 1 + configs/corvus_defconfig | 3 ++- configs/da850_am18xxevm_defconfig | 1 + configs/da850evm_defconfig | 1 + configs/db-88f6720_defconfig | 1 + configs/db-88f6820-gp_defconfig | 1 + configs/db-mv784mp-gp_defconfig | 1 + configs/devkit3250_defconfig | 3 ++- configs/draco_defconfig | 1 + configs/ds414_defconfig | 1 + configs/edminiv2_defconfig | 1 + configs/etamin_defconfig | 1 + configs/gwventana_defconfig | 1 + configs/ipam390_defconfig | 1 + configs/k2e_evm_defconfig | 1 + configs/k2g_evm_defconfig | 1 + configs/k2hk_evm_defconfig | 1 + configs/k2l_evm_defconfig | 1 + configs/ls1021aqds_nand_defconfig | 3 ++- configs/ls1021aqds_sdcard_ifc_defconfig | 1 + configs/ls1021aqds_sdcard_qspi_defconfig | 1 + configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig | 1 + configs/ls1021atwr_sdcard_ifc_defconfig | 1 + configs/ls1021atwr_sdcard_qspi_defconfig | 1 + configs/ls1043aqds_nand_defconfig | 3 ++- configs/ls1043aqds_sdcard_ifc_defconfig | 1 + configs/ls1043aqds_sdcard_qspi_defconfig | 1 + configs/ls1043ardb_nand_defconfig | 3 ++- configs/ls1043ardb_sdcard_defconfig | 1 + configs/ls2080aqds_nand_defconfig | 3 ++- configs/ls2080ardb_nand_defconfig | 3 ++- configs/m28evk_defconfig | 1 + configs/m53evk_defconfig | 3 ++- configs/ma5d4evk_defconfig | 1 + configs/maxbcm_defconfig | 1 + configs/microblaze-generic_defconfig | 1 + configs/mx23_olinuxino_defconfig | 1 + configs/mx23evk_defconfig | 1 + configs/mx28evk_auart_console_defconfig | 1 + configs/mx28evk_defconfig | 1 + configs/mx28evk_nand_defconfig | 1 + configs/mx28evk_spi_defconfig | 1 + configs/mx31pdk_defconfig | 3 ++- configs/mx6cuboxi_defconfig | 1 + configs/mx6sabresd_spl_defconfig | 1 + configs/mx6slevk_spl_defconfig | 1 + configs/mx6sxsabresd_spl_defconfig | 1 + configs/mx6ul_14x14_evk_defconfig | 1 + configs/mx6ul_9x9_evk_defconfig | 1 + configs/novena_defconfig | 1 + configs/omapl138_lcdk_defconfig | 1 + configs/ot1200_spl_defconfig | 1 + configs/pcm051_rev1_defconfig | 1 + configs/pcm051_rev3_defconfig | 1 + configs/pcm058_defconfig | 1 + configs/pengwyn_defconfig | 1 + configs/pepper_defconfig | 1 + configs/picosam9g45_defconfig | 1 + configs/platinum_picon_defconfig | 1 + configs/platinum_titanium_defconfig | 1 + configs/pxm2_defconfig | 1 + configs/rastaban_defconfig | 1 + configs/rut_defconfig | 1 + configs/sama5d2_ptc_nandflash_defconfig | 3 ++- configs/sama5d2_ptc_spiflash_defconfig | 1 + configs/sama5d2_xplained_mmc_defconfig | 1 + configs/sama5d2_xplained_spiflash_defconfig | 1 + configs/sama5d3_xplained_mmc_defconfig | 1 + configs/sama5d3_xplained_nandflash_defconfig | 3 ++- configs/sama5d3xek_mmc_defconfig | 1 + configs/sama5d3xek_nandflash_defconfig | 3 ++- configs/sama5d3xek_spiflash_defconfig | 1 + configs/sama5d4_xplained_mmc_defconfig | 1 + configs/sama5d4_xplained_nandflash_defconfig | 3 ++- configs/sama5d4_xplained_spiflash_defconfig | 1 + configs/sama5d4ek_mmc_defconfig | 1 + configs/sama5d4ek_nandflash_defconfig | 3 ++- configs/sama5d4ek_spiflash_defconfig | 1 + configs/sandbox_spl_defconfig | 1 + configs/sansa_fuze_plus_defconfig | 1 + configs/sc_sps_1_defconfig | 1 + configs/taurus_defconfig | 3 ++- configs/theadorable_debug_defconfig | 1 + configs/theadorable_defconfig | 1 + configs/thuban_defconfig | 1 + configs/ti814x_evm_defconfig | 1 + configs/ti816x_evm_defconfig | 1 + configs/udoo_defconfig | 1 + configs/wandboard_defconfig | 1 + configs/woodburn_sd_defconfig | 1 + configs/work_92105_defconfig | 3 ++- configs/x600_defconfig | 1 + configs/xfi3_defconfig | 1 + configs/xpress_spl_defconfig | 1 + configs/zc5202_defconfig | 1 + configs/zc5601_defconfig | 1 + include/configs/B4860QDS.h | 1 - include/configs/BSC9131RDB.h | 1 - include/configs/BSC9132QDS.h | 1 - include/configs/C29XPCIE.h | 2 -- include/configs/MPC8313ERDB.h | 1 - include/configs/P1010RDB.h | 5 ----- include/configs/P1022DS.h | 4 ---- include/configs/T102xQDS.h | 1 - include/configs/T102xRDB.h | 1 - include/configs/T104xRDB.h | 1 - include/configs/T208xQDS.h | 1 - include/configs/T208xRDB.h | 1 - include/configs/T4240QDS.h | 1 - include/configs/T4240RDB.h | 1 - include/configs/a3m071.h | 1 - include/configs/am3517_crane.h | 1 - include/configs/am3517_evm.h | 1 - include/configs/apf27.h | 1 - include/configs/at91sam9m10g45ek.h | 2 -- include/configs/at91sam9n12ek.h | 2 -- include/configs/at91sam9x5ek.h | 2 -- include/configs/bur_am335x_common.h | 1 - include/configs/clearfog.h | 2 -- include/configs/cm_t35.h | 1 - include/configs/corvus.h | 2 -- include/configs/da850evm.h | 1 - include/configs/db-88f6720.h | 2 -- include/configs/db-88f6820-gp.h | 2 -- include/configs/db-mv784mp-gp.h | 2 -- include/configs/devkit3250.h | 1 - include/configs/ds414.h | 2 -- include/configs/edminiv2.h | 1 - include/configs/imx6_spl.h | 1 - include/configs/ipam390.h | 1 - include/configs/kc1.h | 2 -- include/configs/ls1021aqds.h | 2 -- include/configs/ls1021atwr.h | 1 - include/configs/ls1043a_common.h | 2 -- include/configs/ls2080a_common.h | 1 - include/configs/m53evk.h | 1 - include/configs/ma5d4evk.h | 2 -- include/configs/maxbcm.h | 2 -- include/configs/mcx.h | 1 - include/configs/microblaze-generic.h | 1 - include/configs/mx31pdk.h | 1 - include/configs/mxs.h | 1 - include/configs/omap3_evm.h | 1 - include/configs/omapl138_lcdk.h | 1 - include/configs/p1_p2_rdb_pc.h | 4 ---- include/configs/picosam9g45.h | 1 - include/configs/rk3036_common.h | 2 -- include/configs/rk3288_common.h | 1 - include/configs/sama5d2_ptc.h | 2 -- include/configs/sama5d2_xplained.h | 2 -- include/configs/sama5d3_xplained.h | 2 -- include/configs/sama5d3xek.h | 2 -- include/configs/sama5d4_xplained.h | 2 -- include/configs/sama5d4ek.h | 2 -- include/configs/sandbox_spl.h | 1 - include/configs/siemens-am33x-common.h | 1 - include/configs/sniper.h | 2 -- include/configs/socfpga_common.h | 1 - include/configs/sunxi-common.h | 1 - include/configs/tam3517-common.h | 1 - include/configs/tao3530.h | 1 - include/configs/taurus.h | 2 -- include/configs/tegra-common.h | 2 -- include/configs/theadorable.h | 2 -- include/configs/ti814x_evm.h | 1 - include/configs/ti816x_evm.h | 1 - include/configs/ti_armv7_common.h | 1 - include/configs/tricorder.h | 1 - include/configs/uniphier.h | 1 - include/configs/woodburn_sd.h | 1 - include/configs/work_92105.h | 1 - include/configs/x600.h | 1 - include/configs/xilinx_zynqmp.h | 1 - include/configs/zynq-common.h | 1 - 311 files changed, 331 insertions(+), 172 deletions(-)
arch/arm/cpu/armv7/omap3/Kconfig +3 -0
@@ -30,6 +30,9 @@ config SPL_NAND_SUPPORT config SPL_POWER_SUPPORT default y +config SPL_SERIAL_SUPPORT + default y + choice prompt "OMAP3 board select" optional
arch/arm/cpu/armv7/omap4/Kconfig +3 -0
@@ -30,6 +30,9 @@ config SPL_NAND_SUPPORT config SPL_POWER_SUPPORT default y +config SPL_SERIAL_SUPPORT + default y + choice prompt "OMAP4 board select" optional
arch/arm/cpu/armv7/omap5/Kconfig +3 -0
@@ -30,6 +30,9 @@ config SPL_NAND_SUPPORT config SPL_POWER_SUPPORT default y +config SPL_SERIAL_SUPPORT + default y + choice prompt "OMAP5 board select" optional
arch/arm/cpu/armv8/zynqmp/Kconfig +3 -0
@@ -15,6 +15,9 @@ config SPL_LIBGENERIC_SUPPORT config SPL_MMC_SUPPORT default y +config SPL_SERIAL_SUPPORT + default y + config SYS_BOARD default "zynqmp"
arch/arm/mach-rockchip/rk3036/Kconfig +3 -0
@@ -12,6 +12,9 @@ config SYS_SOC config SYS_MALLOC_F_LEN default 0x400 +config SPL_SERIAL_SUPPORT + default y + source "board/rockchip/evb_rk3036/Kconfig" source "board/rockchip/kylin_rk3036/Kconfig"
arch/arm/mach-rockchip/rk3288/Kconfig +3 -0
@@ -84,6 +84,9 @@ config SPL_LIBGENERIC_SUPPORT config SPL_MMC_SUPPORT default y +config SPL_SERIAL_SUPPORT + default y + source "board/chipspark/popmetal_rk3288/Kconfig" source "board/firefly/firefly-rk3288/Kconfig"
arch/arm/mach-socfpga/Kconfig +3 -0
@@ -15,6 +15,9 @@ config SPL_MMC_SUPPORT config SPL_NAND_SUPPORT default y if SPL_NAND_DENALI +config SPL_SERIAL_SUPPORT + default y + config TARGET_SOCFPGA_ARRIA5 bool select TARGET_SOCFPGA_GEN5
arch/arm/mach-tegra/Kconfig +3 -0
@@ -9,6 +9,9 @@ config SPL_LIBCOMMON_SUPPORT config SPL_LIBGENERIC_SUPPORT default y +config SPL_SERIAL_SUPPORT + default y + config TEGRA_IVC bool "Tegra IVC protocol" help
arch/arm/mach-uniphier/Kconfig +3 -0
@@ -12,6 +12,9 @@ config SPL_MMC_SUPPORT config SPL_NAND_SUPPORT default y if !ARM64 +config SPL_SERIAL_SUPPORT + default y + config SYS_CONFIG_NAME default "uniphier"
arch/arm/mach-zynq/Kconfig +3 -0
@@ -15,6 +15,9 @@ config SPL_LIBGENERIC_SUPPORT config SPL_MMC_SUPPORT default y if ZYNQ_SDHCI +config SPL_SERIAL_SUPPORT + default y + config SYS_BOARD default "zynq"
board/sunxi/Kconfig +3 -0
@@ -18,6 +18,9 @@ config SPL_MMC_SUPPORT config SPL_POWER_SUPPORT default y +config SPL_SERIAL_SUPPORT + default y + # Note only one of these may be selected at a time! But hidden choices are # not supported by Kconfig config SUNXI_GEN_SUN4I
board/ti/common/Kconfig +3 -0
@@ -36,3 +36,6 @@ config SPL_NAND_SUPPORT config SPL_POWER_SUPPORT default y + +config SPL_SERIAL_SUPPORT + default y
configs/B4420QDS_NAND_defconfig +2 -1
@@ -2,6 +2,8 @@ CONFIG_PPC=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_B4860QDS=y
@@ -14,7 +16,6 @@ CONFIG_BOOTDELAY=10 CONFIG_SPL=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y CONFIG_CMD_SF=y
configs/B4860QDS_NAND_defconfig +2 -1
@@ -2,6 +2,8 @@ CONFIG_PPC=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_B4860QDS=y
@@ -14,7 +16,6 @@ CONFIG_BOOTDELAY=10 CONFIG_SPL=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y CONFIG_CMD_SF=y
configs/BSC9131RDB_NAND_SYSCLK100_defconfig +2 -1
@@ -1,4 +1,6 @@ CONFIG_PPC=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_BSC9131RDB=y CONFIG_FIT=y
@@ -8,7 +10,6 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="BSC9131RDB,NAND,SYS_CLK_100" CONFIG_BOOTDELAY=10 CONFIG_SPL=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set
configs/BSC9131RDB_NAND_defconfig +2 -1
@@ -1,4 +1,6 @@ CONFIG_PPC=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_BSC9131RDB=y CONFIG_FIT=y
@@ -8,7 +10,6 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="BSC9131RDB,NAND" CONFIG_BOOTDELAY=10 CONFIG_SPL=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set
configs/BSC9132QDS_NAND_DDRCLK100_defconfig +2 -1
@@ -1,4 +1,6 @@ CONFIG_PPC=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_BSC9132QDS=y CONFIG_FIT=y
@@ -8,7 +10,6 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,NAND,SYS_CLK_100_DDR_100" CONFIG_BOOTDELAY=10 CONFIG_SPL=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y
configs/BSC9132QDS_NAND_DDRCLK133_defconfig +2 -1
@@ -1,4 +1,6 @@ CONFIG_PPC=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_BSC9132QDS=y CONFIG_FIT=y
@@ -8,7 +10,6 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="BSC9132QDS,NAND,SYS_CLK_100_DDR_133" CONFIG_BOOTDELAY=10 CONFIG_SPL=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y
configs/C29XPCIE_NAND_defconfig +3 -1
@@ -1,4 +1,6 @@ CONFIG_PPC=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_C29XPCIE=y CONFIG_FIT=y
@@ -10,12 +12,12 @@ CONFIG_BOOTDELAY=-1 CONFIG_SPL=y CONFIG_TPL=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_SF=y CONFIG_CMD_I2C=y
configs/MPC8313ERDB_NAND_33_defconfig +2 -1
@@ -1,4 +1,6 @@ CONFIG_PPC=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_MPC83xx=y CONFIG_TARGET_MPC8313ERDB=y CONFIG_OF_BOARD_SETUP=y
@@ -6,7 +8,6 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SYS_33MHZ,NAND" CONFIG_BOOTDELAY=6 CONFIG_SPL=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_I2C=y CONFIG_CMD_GPIO=y
configs/MPC8313ERDB_NAND_66_defconfig +2 -1
@@ -1,4 +1,6 @@ CONFIG_PPC=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_MPC83xx=y CONFIG_TARGET_MPC8313ERDB=y CONFIG_OF_BOARD_SETUP=y
@@ -6,7 +8,6 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SYS_66MHZ,NAND" CONFIG_BOOTDELAY=6 CONFIG_SPL=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_I2C=y CONFIG_CMD_GPIO=y
configs/P1010RDB-PA_36BIT_NAND_defconfig +3 -1
@@ -1,4 +1,6 @@ CONFIG_PPC=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y
@@ -11,12 +13,12 @@ CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PA,NAND" CONFIG_BOOTDELAY=10 CONFIG_SPL=y CONFIG_TPL=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y
configs/P1010RDB-PA_36BIT_SDCARD_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_MPC85xx=y
configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_MPC85xx=y
configs/P1010RDB-PA_NAND_defconfig +3 -1
@@ -1,4 +1,6 @@ CONFIG_PPC=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y
@@ -10,12 +12,12 @@ CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PA,NAND" CONFIG_BOOTDELAY=10 CONFIG_SPL=y CONFIG_TPL=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y
configs/P1010RDB-PA_SDCARD_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_MPC85xx=y
configs/P1010RDB-PA_SPIFLASH_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_MPC85xx=y
configs/P1010RDB-PB_36BIT_NAND_defconfig +3 -1
@@ -1,4 +1,6 @@ CONFIG_PPC=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y
@@ -11,12 +13,12 @@ CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PB,NAND" CONFIG_BOOTDELAY=10 CONFIG_SPL=y CONFIG_TPL=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y
configs/P1010RDB-PB_36BIT_SDCARD_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_MPC85xx=y
configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_MPC85xx=y
configs/P1010RDB-PB_NAND_defconfig +3 -1
@@ -1,4 +1,6 @@ CONFIG_PPC=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y
@@ -9,7 +11,6 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="P1010RDB_PB,NAND" CONFIG_BOOTDELAY=10 CONFIG_SPL=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_TPL=y CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y
@@ -17,6 +18,7 @@ CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_TPL_NAND_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y
configs/P1010RDB-PB_SDCARD_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_MPC85xx=y
configs/P1010RDB-PB_SPIFLASH_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_MPC85xx=y
configs/P1020MBG-PC_36BIT_SDCARD_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y
configs/P1020MBG-PC_SDCARD_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y
configs/P1020RDB-PC_36BIT_NAND_defconfig +3 -1
@@ -1,4 +1,6 @@ CONFIG_PPC=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_PHYS_64BIT=y
@@ -9,13 +11,13 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PC,NAND" CONFIG_BOOTDELAY=10 CONFIG_SPL=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_TPL=y CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y
configs/P1020RDB-PC_36BIT_SDCARD_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y
configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y
configs/P1020RDB-PC_NAND_defconfig +3 -1
@@ -1,4 +1,6 @@ CONFIG_PPC=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_FIT=y
@@ -8,13 +10,13 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PC,NAND" CONFIG_BOOTDELAY=10 CONFIG_SPL=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_TPL=y CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y
configs/P1020RDB-PC_SDCARD_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y
configs/P1020RDB-PC_SPIFLASH_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y
configs/P1020RDB-PD_NAND_defconfig +3 -1
@@ -1,4 +1,6 @@ CONFIG_PPC=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_FIT=y
@@ -8,13 +10,13 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="P1020RDB_PD,NAND" CONFIG_BOOTDELAY=10 CONFIG_SPL=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_TPL=y CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y
configs/P1020RDB-PD_SDCARD_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y
configs/P1020RDB-PD_SPIFLASH_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y
configs/P1020UTM-PC_36BIT_SDCARD_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y
configs/P1020UTM-PC_SDCARD_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y
configs/P1021RDB-PC_36BIT_NAND_defconfig +3 -1
@@ -1,4 +1,6 @@ CONFIG_PPC=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_PHYS_64BIT=y
@@ -9,13 +11,13 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="P1021RDB,NAND" CONFIG_BOOTDELAY=10 CONFIG_SPL=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_TPL=y CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y
configs/P1021RDB-PC_36BIT_SDCARD_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y
configs/P1021RDB-PC_36BIT_SPIFLASH_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y
configs/P1021RDB-PC_NAND_defconfig +3 -1
@@ -1,4 +1,6 @@ CONFIG_PPC=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_FIT=y
@@ -8,13 +10,13 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="P1021RDB,NAND" CONFIG_BOOTDELAY=10 CONFIG_SPL=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_TPL=y CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y
configs/P1021RDB-PC_SDCARD_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y
configs/P1021RDB-PC_SPIFLASH_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y
configs/P1022DS_36BIT_NAND_defconfig +3 -1
@@ -1,4 +1,6 @@ CONFIG_PPC=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1022DS=y CONFIG_PHYS_64BIT=y
@@ -9,13 +11,13 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_BOOTDELAY=10 CONFIG_SPL=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_TPL=y CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y
configs/P1022DS_36BIT_SDCARD_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1022DS=y
configs/P1022DS_36BIT_SPIFLASH_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1022DS=y
configs/P1022DS_NAND_defconfig +3 -1
@@ -1,4 +1,6 @@ CONFIG_PPC=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1022DS=y CONFIG_FIT=y
@@ -8,7 +10,6 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_BOOTDELAY=10 CONFIG_SPL=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_TPL=y CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y
@@ -16,6 +17,7 @@ CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_TPL_NAND_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y
configs/P1022DS_SDCARD_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1022DS=y
configs/P1022DS_SPIFLASH_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1022DS=y
configs/P1024RDB_NAND_defconfig +3 -1
@@ -1,4 +1,6 @@ CONFIG_PPC=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_FIT=y
@@ -8,13 +10,13 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="P1024RDB,NAND" CONFIG_BOOTDELAY=10 CONFIG_SPL=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_TPL=y CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y
configs/P1024RDB_SDCARD_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y
configs/P1024RDB_SPIFLASH_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y
configs/P1025RDB_NAND_defconfig +3 -1
@@ -1,4 +1,6 @@ CONFIG_PPC=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_FIT=y
@@ -9,13 +11,13 @@ CONFIG_SYS_EXTRA_OPTIONS="P1025RDB,NAND" CONFIG_BOOTDELAY=10 CONFIG_SPL=y CONFIG_TPL=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_TPL_NAND_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y
configs/P1025RDB_SDCARD_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y
configs/P1025RDB_SPIFLASH_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y
configs/P2020RDB-PC_36BIT_NAND_defconfig +3 -1
@@ -1,4 +1,6 @@ CONFIG_PPC=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_PHYS_64BIT=y
@@ -9,7 +11,6 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="P2020RDB,NAND" CONFIG_BOOTDELAY=10 CONFIG_SPL=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_TPL=y CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y
@@ -17,6 +18,7 @@ CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_TPL_NAND_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y
configs/P2020RDB-PC_36BIT_SDCARD_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y
configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y
configs/P2020RDB-PC_NAND_defconfig +3 -1
@@ -1,4 +1,6 @@ CONFIG_PPC=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_FIT=y
@@ -8,13 +10,13 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="P2020RDB,NAND" CONFIG_BOOTDELAY=10 CONFIG_SPL=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_TPL=y CONFIG_TPL_ENV_SUPPORT=y CONFIG_TPL_I2C_SUPPORT=y CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y +CONFIG_TPL_SERIAL_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y
configs/P2020RDB-PC_SDCARD_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y
configs/P2020RDB-PC_SPIFLASH_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y
configs/T1023RDB_NAND_defconfig +2 -1
@@ -2,6 +2,8 @@ CONFIG_PPC=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T102XRDB=y
@@ -14,7 +16,6 @@ CONFIG_BOOTDELAY=10 CONFIG_SPL=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_GREPENV=y
configs/T1023RDB_SDCARD_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T102XRDB=y
configs/T1023RDB_SPIFLASH_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T102XRDB=y
configs/T1024QDS_NAND_defconfig +2 -1
@@ -2,6 +2,8 @@ CONFIG_PPC=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T102XQDS=y
@@ -14,7 +16,6 @@ CONFIG_BOOTDELAY=10 CONFIG_SPL=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y CONFIG_CMD_MMC=y
configs/T1024QDS_SDCARD_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T102XQDS=y
configs/T1024QDS_SPIFLASH_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T102XQDS=y
configs/T1024RDB_NAND_defconfig +2 -1
@@ -2,6 +2,8 @@ CONFIG_PPC=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T102XRDB=y
@@ -14,7 +16,6 @@ CONFIG_BOOTDELAY=10 CONFIG_SPL=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y CONFIG_CMD_MEMTEST=y
configs/T1024RDB_SDCARD_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T102XRDB=y
configs/T1024RDB_SPIFLASH_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T102XRDB=y
configs/T1040D4RDB_NAND_defconfig +2 -1
@@ -2,6 +2,8 @@ CONFIG_PPC=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y
@@ -14,7 +16,6 @@ CONFIG_BOOTDELAY=10 CONFIG_SPL=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y CONFIG_CMD_MMC=y
configs/T1040D4RDB_SDCARD_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y
configs/T1040D4RDB_SPIFLASH_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y
configs/T1040RDB_NAND_defconfig +2 -1
@@ -2,6 +2,8 @@ CONFIG_PPC=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y
@@ -14,7 +16,6 @@ CONFIG_BOOTDELAY=10 CONFIG_SPL=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y CONFIG_CMD_MMC=y
configs/T1040RDB_SDCARD_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y
configs/T1040RDB_SPIFLASH_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y
configs/T1042D4RDB_NAND_defconfig +2 -1
@@ -2,6 +2,8 @@ CONFIG_PPC=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y
@@ -14,7 +16,6 @@ CONFIG_BOOTDELAY=10 CONFIG_SPL=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y CONFIG_CMD_MMC=y
configs/T1042D4RDB_SDCARD_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y
configs/T1042D4RDB_SPIFLASH_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y
configs/T1042RDB_PI_NAND_SECURE_BOOT_defconfig +2 -1
@@ -2,6 +2,8 @@ CONFIG_PPC=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y
@@ -16,7 +18,6 @@ CONFIG_SPL_CRYPTO_SUPPORT=y CONFIG_SPL_HASH_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y CONFIG_CMD_MMC=y
configs/T1042RDB_PI_NAND_defconfig +2 -1
@@ -2,6 +2,8 @@ CONFIG_PPC=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y
@@ -14,7 +16,6 @@ CONFIG_BOOTDELAY=10 CONFIG_SPL=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y CONFIG_CMD_MMC=y
configs/T1042RDB_PI_SDCARD_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y
configs/T1042RDB_PI_SPIFLASH_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y
configs/T2080QDS_NAND_defconfig +2 -1
@@ -2,6 +2,8 @@ CONFIG_PPC=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T208XQDS=y
@@ -14,7 +16,6 @@ CONFIG_BOOTDELAY=10 CONFIG_SPL=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y CONFIG_CMD_MMC=y
configs/T2080QDS_SDCARD_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T208XQDS=y
configs/T2080QDS_SPIFLASH_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T208XQDS=y
configs/T2080RDB_NAND_defconfig +2 -1
@@ -2,6 +2,8 @@ CONFIG_PPC=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T208XRDB=y
@@ -14,7 +16,6 @@ CONFIG_BOOTDELAY=10 CONFIG_SPL=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_MMC=y
configs/T2080RDB_SDCARD_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T208XRDB=y
configs/T2080RDB_SPIFLASH_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T208XRDB=y
configs/T2081QDS_NAND_defconfig +2 -1
@@ -2,6 +2,8 @@ CONFIG_PPC=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T208XQDS=y
@@ -14,7 +16,6 @@ CONFIG_BOOTDELAY=10 CONFIG_SPL=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y CONFIG_CMD_MMC=y
configs/T2081QDS_SDCARD_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T208XQDS=y
configs/T2081QDS_SPIFLASH_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_PPC=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T208XQDS=y
configs/T4160QDS_NAND_defconfig +2 -1
@@ -2,6 +2,8 @@ CONFIG_PPC=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T4240QDS=y
@@ -14,7 +16,6 @@ CONFIG_BOOTDELAY=10 CONFIG_SPL=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y CONFIG_CMD_MMC=y
configs/T4160QDS_SDCARD_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T4240QDS=y
configs/T4240QDS_NAND_defconfig +2 -1
@@ -2,6 +2,8 @@ CONFIG_PPC=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T4240QDS=y
@@ -14,7 +16,6 @@ CONFIG_BOOTDELAY=10 CONFIG_SPL=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y CONFIG_CMD_MMC=y
configs/T4240QDS_SDCARD_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T4240QDS=y
configs/T4240RDB_SDCARD_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T4240RDB=y
configs/a3m071_defconfig +1 -0
@@ -1,6 +1,7 @@ CONFIG_PPC=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC5xxx=y CONFIG_TARGET_A3M071=y
configs/a4m2k_defconfig +1 -0
@@ -1,6 +1,7 @@ CONFIG_PPC=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_MPC5xxx=y CONFIG_TARGET_A3M071=y
configs/am335x_baltos_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_FIT=y CONFIG_FIT_VERBOSE=y
configs/am335x_igep0033_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y
configs/am335x_shc_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SERIES=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_FIT=y
configs/am335x_shc_ict_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SHC_ICT=y CONFIG_SERIES=y CONFIG_SPL_STACK_R_ADDR=0x82000000
configs/am335x_shc_netboot_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SHC_NETBOOT=y CONFIG_SERIES=y
configs/am335x_shc_prompt_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SERIES=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_FIT=y
configs/am335x_shc_sdboot_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SHC_SDBOOT=y CONFIG_SERIES=y CONFIG_SPL_STACK_R_ADDR=0x82000000
configs/am335x_shc_sdboot_prompt_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SHC_SDBOOT=y CONFIG_SERIES=y CONFIG_SPL_STACK_R_ADDR=0x82000000
configs/am335x_sl50_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_FIT=y
configs/apf27_defconfig +2 -1
@@ -1,9 +1,10 @@ CONFIG_ARM=y CONFIG_TARGET_APF27=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_BOOTDELAY=5 CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="BIOS> " # CONFIG_CMD_IMLS is not set
configs/apx4devkit_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_TARGET_APX4DEVKIT=y CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_BOOTDELAY=1 CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y
configs/at91sam9m10g45ek_mmc_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_FAT_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,SYS_USE_MMC" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/at91sam9m10g45ek_nandflash_defconfig +2 -1
@@ -4,10 +4,11 @@ CONFIG_TARGET_AT91SAM9M10G45EK=y CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,SYS_USE_NANDFLASH" CONFIG_BOOTDELAY=3 CONFIG_SPL=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set
configs/at91sam9n12ek_nandflash_defconfig +2 -1
@@ -4,10 +4,11 @@ CONFIG_TARGET_AT91SAM9N12EK=y CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9N12,SYS_USE_NANDFLASH" CONFIG_BOOTDELAY=3 CONFIG_SPL=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_BOOTZ=y
configs/at91sam9n12ek_spiflash_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_TARGET_AT91SAM9N12EK=y CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9N12,SYS_USE_SPIFLASH" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/at91sam9x5ek_nandflash_defconfig +2 -1
@@ -4,10 +4,11 @@ CONFIG_TARGET_AT91SAM9X5EK=y CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9X5,SYS_USE_NANDFLASH" CONFIG_BOOTDELAY=3 CONFIG_SPL=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot> " CONFIG_CMD_BOOTZ=y
configs/at91sam9x5ek_spiflash_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_TARGET_AT91SAM9X5EK=y CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9X5,SYS_USE_SPIFLASH" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/axm_defconfig +2 -1
@@ -4,11 +4,12 @@ CONFIG_TARGET_TAURUS=y CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="at91sam9g20-taurus" CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2068,BOARD_AXM" CONFIG_BOOTDELAY=3 CONFIG_SPL=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y # CONFIG_CMD_BDI is not set CONFIG_CMD_BOOTZ=y
configs/bg0900_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_TARGET_BG0900=y CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_BOOTDELAY=3 CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y
configs/birdland_bav335a_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_BAV_VERSION=1 CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1"
configs/birdland_bav335b_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_BAV_VERSION=2 CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1"
configs/brppt1_mmc_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,EMMC_BOOT" CONFIG_BOOTDELAY=-2
configs/brppt1_nand_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND" CONFIG_BOOTDELAY=-2
configs/brppt1_spi_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,SPI_BOOT,EMMC_BOOT" CONFIG_SPI_BOOT=y
configs/brxre1_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1" CONFIG_BOOTDELAY=-2 CONFIG_VERSION_VARIABLE=y
configs/cgtqmx6eval_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_SPL_EXT_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,SPL,MX6QDL" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/clearfog_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_TARGET_CLEARFOG=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="armada-388-clearfog" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/cm_fx6_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_TARGET_CM_FX6=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL,SPL" CONFIG_BOOTDELAY=3
configs/cm_t335_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y CONFIG_SPL_MTD_SUPPORT=y
configs/cm_t43_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y CONFIG_SPL_MTD_SUPPORT=y
configs/corvus_defconfig +2 -1
@@ -4,11 +4,12 @@ CONFIG_TARGET_CORVUS=y CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="at91sam9g45-corvus" CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,MACH_TYPE=2066,SYS_USE_NANDFLASH" CONFIG_BOOTDELAY=3 CONFIG_SPL=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set
configs/da850_am18xxevm_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_ARCH_DAVINCI=y CONFIG_TARGET_DA850EVM=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="DA850_AM18X_EVM,MAC_ADDR_IN_EEPROM,SYS_I2C_EEPROM_ADDR_LEN=2,SYS_I2C_EEPROM_ADDR=0x50" CONFIG_BOOTDELAY=3 CONFIG_VERSION_VARIABLE=y
configs/da850evm_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_ARCH_DAVINCI=y CONFIG_TARGET_DA850EVM=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="MAC_ADDR_IN_SPIFLASH" CONFIG_BOOTDELAY=3 CONFIG_VERSION_VARIABLE=y
configs/db-88f6720_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_TARGET_DB_88F6720=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="armada-375-db" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_BOOTDELAY=3
configs/db-88f6820-gp_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_TARGET_DB_88F6820_GP=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="armada-388-gp" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/db-mv784mp-gp_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_TARGET_DB_MV784MP_GP=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="armada-xp-gp" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_BOOTDELAY=3
configs/devkit3250_defconfig +2 -1
@@ -2,11 +2,12 @@ CONFIG_ARM=y CONFIG_TARGET_DEVKIT3250=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_BOOTDELAY=1 CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_CMD_SPI=y CONFIG_CMD_I2C=y CONFIG_CMD_USB=y
configs/draco_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-draco" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/ds414_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_TARGET_DS414=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="armada-xp-synology-ds414" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/edminiv2_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_ORION5X=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_TARGET_EDMINIV2=y CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/etamin_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-draco" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/gwventana_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_STACK_R_ADDR=0x18000000 CONFIG_DM_SERIAL=y CONFIG_FIT=y
configs/ipam390_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y CONFIG_HUSH_PARSER=y
configs/k2e_evm_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_TARGET_K2E_EVM=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="k2e-evm" CONFIG_OF_BOARD_SETUP=y CONFIG_VERSION_VARIABLE=y
configs/k2g_evm_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_TARGET_K2G_EVM=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="k2g-evm" CONFIG_OF_BOARD_SETUP=y CONFIG_VERSION_VARIABLE=y
configs/k2hk_evm_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_TARGET_K2HK_EVM=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="k2hk-evm" CONFIG_OF_BOARD_SETUP=y CONFIG_VERSION_VARIABLE=y
configs/k2l_evm_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_TARGET_K2L_EVM=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="k2l-evm" CONFIG_OF_BOARD_SETUP=y CONFIG_VERSION_VARIABLE=y
configs/ls1021aqds_nand_defconfig +2 -1
@@ -3,6 +3,8 @@ CONFIG_TARGET_LS1021AQDS=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_FIT=y
@@ -14,7 +16,6 @@ CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_SPL=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_GREPENV=y
configs/ls1021aqds_sdcard_ifc_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart"
configs/ls1021aqds_sdcard_qspi_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart"
configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_FIT=y
configs/ls1021atwr_sdcard_ifc_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y
configs/ls1021atwr_sdcard_qspi_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="ls1021a-twr-duart" CONFIG_FIT=y
configs/ls1043aqds_nand_defconfig +2 -1
@@ -3,6 +3,8 @@ CONFIG_TARGET_LS1043AQDS=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart"
@@ -14,7 +16,6 @@ CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_SPL=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_GREPENV=y
configs/ls1043aqds_sdcard_ifc_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart"
configs/ls1043aqds_sdcard_qspi_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart"
configs/ls1043ardb_nand_defconfig +2 -1
@@ -3,6 +3,8 @@ CONFIG_TARGET_LS1043ARDB=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb"
@@ -14,7 +16,6 @@ CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=10 CONFIG_SPL=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y
configs/ls1043ardb_sdcard_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb"
configs/ls2080aqds_nand_defconfig +2 -1
@@ -3,6 +3,8 @@ CONFIG_TARGET_LS2080AQDS=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-qds"
@@ -14,7 +16,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, NAND, LS2080A" CONFIG_BOOTDELAY=10 CONFIG_SPL=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y CONFIG_CMD_MMC=y
configs/ls2080ardb_nand_defconfig +2 -1
@@ -3,6 +3,8 @@ CONFIG_TARGET_LS2080ARDB=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_FIT=y
@@ -13,7 +15,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, NAND, LS2080A" CONFIG_BOOTDELAY=10 CONFIG_SPL=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GREPENV=y CONFIG_CMD_MMC=y
configs/m28evk_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_TARGET_M28EVK=y CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_FIT=y CONFIG_BOOTDELAY=3 CONFIG_VERSION_VARIABLE=y
configs/m53evk_defconfig +2 -1
@@ -3,12 +3,13 @@ CONFIG_TARGET_M53EVK=y CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/denx/m53evk/imximage.cfg" CONFIG_BOOTDELAY=3 CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_ASKENV=y
configs/ma5d4evk_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_TARGET_MA5D4EVK=y CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4" CONFIG_BOOTDELAY=3
configs/maxbcm_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_TARGET_MAXBCM=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="armada-xp-maxbcm" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/microblaze-generic_defconfig +1 -0
@@ -1,6 +1,7 @@ CONFIG_MICROBLAZE=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_TARGET_MICROBLAZE_GENERIC=y CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1 CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
configs/mx23_olinuxino_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_TARGET_MX23_OLINUXINO=y CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_BOOTDELAY=3 CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y
configs/mx23evk_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_TARGET_MX23EVK=y CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_BOOTDELAY=1 CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y
configs/mx28evk_auart_console_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_TARGET_MX28EVK=y CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="MXS_AUART,MXS_AUART_BASE=MXS_UARTAPP3_BASE,ENV_IS_IN_MMC" CONFIG_BOOTDELAY=1 CONFIG_VERSION_VARIABLE=y
configs/mx28evk_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_TARGET_MX28EVK=y CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="ENV_IS_IN_MMC" CONFIG_BOOTDELAY=1
configs/mx28evk_nand_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_TARGET_MX28EVK=y CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="ENV_IS_IN_NAND" CONFIG_BOOTDELAY=1 CONFIG_VERSION_VARIABLE=y
configs/mx28evk_spi_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_TARGET_MX28EVK=y CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="ENV_IS_IN_SPI_FLASH" CONFIG_BOOTDELAY=1 CONFIG_VERSION_VARIABLE=y
configs/mx31pdk_defconfig +2 -1
@@ -1,9 +1,10 @@ CONFIG_ARM=y CONFIG_TARGET_MX31PDK=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_BOOTDELAY=1 CONFIG_SPL=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set CONFIG_CMD_SPI=y
configs/mx6cuboxi_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_SPL_EXT_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL" CONFIG_SPL=y CONFIG_HUSH_PARSER=y
configs/mx6sabresd_spl_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_SPL_EXT_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,SPL,MX6Q" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/mx6slevk_spl_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_SPL_EXT_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,SPL,MX6SL" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/mx6sxsabresd_spl_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_SPL_EXT_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/mx6ul_14x14_evk_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_SPL_EXT_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/mx6ul_9x9_evk_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_SPL_EXT_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/novena_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_FAT_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q" CONFIG_VERSION_VARIABLE=y
configs/omapl138_lcdk_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_ARCH_DAVINCI=y CONFIG_TARGET_OMAPL138_LCDK=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_BOOTDELAY=3 CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y
configs/ot1200_spl_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_TARGET_OT1200=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/pcm051_rev1_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="REV1" CONFIG_VERSION_VARIABLE=y
configs/pcm051_rev3_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="REV3" CONFIG_VERSION_VARIABLE=y
configs/pcm058_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_SPL_EXT_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q" CONFIG_BOOTDELAY=3
configs/pengwyn_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y
configs/pepper_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL=y CONFIG_VERSION_VARIABLE=y CONFIG_HUSH_PARSER=y
configs/picosam9g45_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_FAT_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,SYS_USE_MMC" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/platinum_picon_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6DL" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/platinum_titanium_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/pxm2_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-pxm50" CONFIG_FIT=y CONFIG_BOOTDELAY=3
configs/rastaban_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-draco" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/rut_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-rut" CONFIG_FIT=y CONFIG_BOOTDELAY=3
configs/sama5d2_ptc_nandflash_defconfig +2 -1
@@ -4,10 +4,11 @@ CONFIG_TARGET_SAMA5D2_PTC=y CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2,SYS_USE_NANDFLASH" CONFIG_BOOTDELAY=3 CONFIG_SPL=y -CONFIG_SPL_NAND_SUPPORT=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_LOADS is not set
configs/sama5d2_ptc_spiflash_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_TARGET_SAMA5D2_PTC=y CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2,SYS_USE_SERIALFLASH" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/sama5d2_xplained_mmc_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_FAT_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2,SYS_USE_MMC" CONFIG_BOOTDELAY=3
configs/sama5d2_xplained_spiflash_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_TARGET_SAMA5D2_XPLAINED=y CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2,SYS_USE_SERIALFLASH" CONFIG_BOOTDELAY=3
configs/sama5d3_xplained_mmc_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_FAT_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_MMC" CONFIG_BOOTDELAY=3
configs/sama5d3_xplained_nandflash_defconfig +2 -1
@@ -4,11 +4,12 @@ CONFIG_TARGET_SAMA5D3_XPLAINED=y CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_NANDFLASH" CONFIG_BOOTDELAY=3 CONFIG_SPL=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set
configs/sama5d3xek_mmc_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_FAT_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_MMC" CONFIG_BOOTDELAY=3
configs/sama5d3xek_nandflash_defconfig +2 -1
@@ -4,11 +4,12 @@ CONFIG_TARGET_SAMA5D3XEK=y CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_NANDFLASH" CONFIG_BOOTDELAY=3 CONFIG_SPL=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set
configs/sama5d3xek_spiflash_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_TARGET_SAMA5D3XEK=y CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_SERIALFLASH" CONFIG_BOOTDELAY=3
configs/sama5d4_xplained_mmc_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_FAT_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_MMC" CONFIG_BOOTDELAY=3
configs/sama5d4_xplained_nandflash_defconfig +2 -1
@@ -4,11 +4,12 @@ CONFIG_TARGET_SAMA5D4_XPLAINED=y CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_NANDFLASH" CONFIG_BOOTDELAY=3 CONFIG_SPL=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set
configs/sama5d4_xplained_spiflash_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_TARGET_SAMA5D4_XPLAINED=y CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_SERIALFLASH" CONFIG_BOOTDELAY=3
configs/sama5d4ek_mmc_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_FAT_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_MMC" CONFIG_BOOTDELAY=3
configs/sama5d4ek_nandflash_defconfig +2 -1
@@ -4,11 +4,12 @@ CONFIG_TARGET_SAMA5D4EK=y CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_NANDFLASH" CONFIG_BOOTDELAY=3 CONFIG_SPL=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set
configs/sama5d4ek_spiflash_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_TARGET_SAMA5D4EK=y CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_SERIALFLASH" CONFIG_BOOTDELAY=3
configs/sandbox_spl_defconfig +1 -0
@@ -1,5 +1,6 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_MMC=y
configs/sansa_fuze_plus_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_TARGET_SANSA_FUZE_PLUS=y CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_BOOTDELAY=3 CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y
configs/sc_sps_1_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_TARGET_SC_SPS_1=y CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_BOOTDELAY=3 CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y
configs/taurus_defconfig +2 -1
@@ -4,11 +4,12 @@ CONFIG_TARGET_TAURUS=y CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="at91sam9g20-taurus" CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2067,BOARD_TAURUS" CONFIG_BOOTDELAY=3 CONFIG_SPL=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set
configs/theadorable_debug_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_TARGET_THEADORABLE=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="armada-xp-theadorable" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_FIT=y
configs/theadorable_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_TARGET_THEADORABLE=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="armada-xp-theadorable" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_FIT=y
configs/thuban_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-draco" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/ti814x_evm_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_FAT_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_BOOTDELAY=1 CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y
configs/ti816x_evm_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_FAT_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_BOOTDELAY=3 CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y
configs/udoo_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_SPL_EXT_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/wandboard_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_SPL_EXT_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL" CONFIG_SPL=y CONFIG_HUSH_PARSER=y
configs/woodburn_sd_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/woodburn/imximage.cfg" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/work_92105_defconfig +2 -1
@@ -2,11 +2,12 @@ CONFIG_ARM=y CONFIG_TARGET_WORK_92105=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_NAND_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_BOOTDELAY=3 CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set
configs/x600_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_TARGET_X600=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_BOOTDELAY=3 CONFIG_SPL=y CONFIG_SPL_NOR_SUPPORT=y
configs/xfi3_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_TARGET_XFI3=y CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_BOOTDELAY=3 CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y
configs/xpress_spl_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_SPL_EXT_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/zc5202_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_SPL_EXT_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/zc5601_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_SPL_EXT_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
include/configs/B4860QDS.h +0 -1
@@ -21,7 +21,6 @@#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc#else -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin"#define CONFIG_FSL_LAW /* Use common FSL init code */
include/configs/BSC9131RDB.h +0 -1
@@ -28,7 +28,6 @@#ifdef CONFIG_NAND #define CONFIG_SPL_INIT_MINIMAL -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_NAND_BOOT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
include/configs/BSC9132QDS.h +0 -1
@@ -44,7 +44,6 @@#ifdef CONFIG_NAND #define CONFIG_SPL_INIT_MINIMAL -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_NAND_BOOT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
include/configs/C29XPCIE.h +0 -2
@@ -28,7 +28,6 @@#define CONFIG_SPL_NAND_BOOT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_NAND_INIT -#define CONFIG_TPL_SERIAL_SUPPORT #define CONFIG_TPL_DRIVERS_MISC_SUPPORT #define CONFIG_SPL_COMMON_INIT_DDR #define CONFIG_SPL_MAX_SIZE (128 << 10)
@@ -40,7 +39,6 @@#define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10)#elif defined(CONFIG_SPL_BUILD )#define CONFIG_SPL_INIT_MINIMAL -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_NAND_MINIMAL #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TEXT_BASE 0xff800000
include/configs/MPC8313ERDB.h +0 -1
@@ -22,7 +22,6 @@#ifdef CONFIG_NAND #define CONFIG_SPL_INIT_MINIMAL -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin"#define CONFIG_SPL_MPC83XX_WAIT_FOR_NAND
include/configs/P1010RDB.h +0 -5
@@ -19,7 +19,6 @@#define CONFIG_NAND_FSL_IFC #ifdef CONFIG_SDCARD -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_MMC_MINIMAL #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
@@ -46,7 +45,6 @@#define CONFIG_SYS_TEXT_BASE 0x11000000#define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc#else -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_FLASH_MINIMAL
@@ -73,7 +71,6 @@#ifdef CONFIG_NAND #ifdef CONFIG_SECURE_BOOT #define CONFIG_SPL_INIT_MINIMAL -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_NAND_BOOT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
@@ -93,7 +90,6 @@#define CONFIG_SPL_NAND_BOOT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_NAND_INIT -#define CONFIG_TPL_SERIAL_SUPPORT #define CONFIG_SPL_COMMON_INIT_DDR #define CONFIG_SPL_MAX_SIZE (128 << 10)#define CONFIG_SPL_TEXT_BASE 0xD0001000
@@ -104,7 +100,6 @@#define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10)#elif defined(CONFIG_SPL_BUILD )#define CONFIG_SPL_INIT_MINIMAL -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_NAND_MINIMAL #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TEXT_BASE 0xff800000
include/configs/P1022DS.h +0 -4
@@ -14,7 +14,6 @@#define CONFIG_DISPLAY_BOARDINFO #ifdef CONFIG_SDCARD -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_MMC_MINIMAL #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
@@ -36,7 +35,6 @@#endif #ifdef CONFIG_SPIFLASH -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_FLASH_MINIMAL
@@ -68,7 +66,6 @@#define CONFIG_SPL_NAND_BOOT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_NAND_INIT -#define CONFIG_TPL_SERIAL_SUPPORT #define CONFIG_SPL_COMMON_INIT_DDR #define CONFIG_SPL_MAX_SIZE (128 << 10)#define CONFIG_SPL_TEXT_BASE 0xf8f81000
@@ -79,7 +76,6 @@#define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10)#elif defined(CONFIG_SPL_BUILD )#define CONFIG_SPL_INIT_MINIMAL -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TEXT_BASE 0xff800000#define CONFIG_SPL_MAX_SIZE 4096
include/configs/T102xQDS.h +0 -1
@@ -43,7 +43,6 @@#ifdef CONFIG_RAMBOOT_PBL #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xqds/t1024_pbi.cfg#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_rcw.cfg -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin"#define CONFIG_FSL_LAW /* Use common FSL init code */
include/configs/T102xRDB.h +0 -1
@@ -50,7 +50,6 @@#elif defined(CONFIG_T1023RDB )#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_rcw.cfg#endif -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin"#define CONFIG_FSL_LAW /* Use common FSL init code */
include/configs/T104xRDB.h +0 -1
@@ -43,7 +43,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1040d4_rcw.cfg $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg#endif -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin"#define CONFIG_FSL_LAW /* Use common FSL init code */
include/configs/T208xQDS.h +0 -1
@@ -53,7 +53,6 @@#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_rcw.cfg#endif -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin"#define CONFIG_FSL_LAW /* Use common FSL init code */
include/configs/T208xRDB.h +0 -1
@@ -42,7 +42,6 @@#define CONFIG_SYS_FSL_PBL_PBI board/freescale/t208xrdb/t2080_pbi.cfg#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xrdb/t2080_rcw.cfg -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin"#define CONFIG_FSL_LAW /* Use common FSL init code */
include/configs/T4240QDS.h +0 -1
@@ -25,7 +25,6 @@#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc#else -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin"#define CONFIG_FSL_LAW /* Use common FSL init code */
include/configs/T4240RDB.h +0 -1
@@ -25,7 +25,6 @@#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc#else -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin"#define CONFIG_FSL_LAW /* Use common FSL init code */
include/configs/a3m071.h +0 -1
@@ -398,7 +398,6 @@#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_TEXT_BASE 0xfc000000 -#define CONFIG_SPL_SERIAL_SUPPORT /* Place BSS for SPL near end of SDRAM */ #define CONFIG_SPL_BSS_START_ADDR ((128 - 1) << 20)
include/configs/am3517_crane.h +0 -1
@@ -287,7 +287,6 @@#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC
include/configs/am3517_evm.h +0 -1
@@ -344,7 +344,6 @@#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC
include/configs/apf27.h +0 -1
@@ -38,7 +38,6 @@#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds"#define CONFIG_SPL_MAX_SIZE 2048#define CONFIG_SPL_TEXT_BASE 0xA0000000 -#define CONFIG_SPL_SERIAL_SUPPORT /* NAND boot config */ #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
include/configs/at91sam9m10g45ek.h +0 -2
@@ -186,8 +186,6 @@#define CONFIG_SPL_MAX_SIZE 0x010000#define CONFIG_SPL_STACK 0x310000 -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SYS_MONITOR_LEN 0x80000#ifdef CONFIG_SYS_USE_MMC
include/configs/at91sam9n12ek.h +0 -2
@@ -230,8 +230,6 @@#define CONFIG_SYS_SPL_MALLOC_START 0x20080000#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SYS_MONITOR_LEN (512 << 10)
include/configs/at91sam9x5ek.h +0 -2
@@ -230,8 +230,6 @@#define CONFIG_SYS_SPL_MALLOC_START 0x20080000#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SYS_MONITOR_LEN (512 << 10)
include/configs/bur_am335x_common.h +0 -1
@@ -112,7 +112,6 @@#define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN/* General parts of the framework, required. */ -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_YMODEM_SUPPORT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"
include/configs/clearfog.h +0 -2
@@ -123,8 +123,6 @@#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10))#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) -#define CONFIG_SPL_SERIAL_SUPPORT -#if CONFIG_SPL_BOOT_DEVICE ==SPL_BOOT_SPI_NOR_FLASH /* SPL related SPI defines */ #define CONFIG_SPL_SPI_SUPPORT
include/configs/cm_t35.h +0 -1
@@ -306,7 +306,6 @@#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"#define CONFIG_SPL_BOARD_INIT -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC
include/configs/corvus.h +0 -2
@@ -160,8 +160,6 @@#define CONFIG_SPL_BSS_START_ADDR CONFIG_SPL_MAX_SIZE#define CONFIG_SPL_BSS_MAX_SIZE (SZ_2K) -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_BASE
include/configs/da850evm.h +0 -1
@@ -342,7 +342,6 @@#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_LDSCRIPT "board/$(BOARDDIR)/u-boot-spl-da850evm.lds"#define CONFIG_SPL_STACK 0x8001ff00#define CONFIG_SPL_TEXT_BASE 0x80000000
include/configs/db-88f6720.h +0 -2
@@ -91,8 +91,6 @@#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10))#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) -#define CONFIG_SPL_SERIAL_SUPPORT -/* SPL related SPI defines */ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT
include/configs/db-88f6820-gp.h +0 -2
@@ -124,8 +124,6 @@#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10))#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) -#define CONFIG_SPL_SERIAL_SUPPORT -#if CONFIG_SPL_BOOT_DEVICE ==SPL_BOOT_SPI_NOR_FLASH /* SPL related SPI defines */ #define CONFIG_SPL_SPI_SUPPORT
include/configs/db-mv784mp-gp.h +0 -2
@@ -116,8 +116,6 @@#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10))#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) -#define CONFIG_SPL_SERIAL_SUPPORT -/* SPL related SPI defines */ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT
include/configs/devkit3250.h +0 -1
@@ -195,7 +195,6 @@#define CONFIG_SPL_FRAMEWORK /* SPL will use serial */ -#define CONFIG_SPL_SERIAL_SUPPORT /* SPL loads an image from NAND */ #define CONFIG_SPL_NAND_SIMPLE
include/configs/ds414.h +0 -2
@@ -122,8 +122,6 @@#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10))#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) -#define CONFIG_SPL_SERIAL_SUPPORT -/* SPL related SPI defines */ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT
include/configs/edminiv2.h +0 -1
@@ -17,7 +17,6 @@*/ #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_TEXT_BASE 0xffff0000#define CONFIG_SPL_MAX_SIZE 0x0000fff0#define CONFIG_SPL_STACK 0x00020000
include/configs/imx6_spl.h +0 -1
@@ -29,7 +29,6 @@#define CONFIG_SPL_TEXT_BASE 0x00908000#define CONFIG_SPL_MAX_SIZE 0x10000#define CONFIG_SPL_STACK 0x0091FFB8 -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_WATCHDOG_SUPPORT /* NAND support */
include/configs/ipam390.h +0 -1
@@ -284,7 +284,6 @@#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \ CONFIG_SYS_MALLOC_LEN)#define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_LDSCRIPT "board/$(BOARDDIR)/u-boot-spl-ipam390.lds"#define CONFIG_SPL_STACK 0x8001ff00#define CONFIG_SPL_TEXT_BASE 0x80000000
include/configs/kc1.h +0 -2
@@ -129,8 +129,6 @@#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"#define CONFIG_SPL_BOARD_INIT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 2/*
include/configs/ls1021aqds.h +0 -2
@@ -68,7 +68,6 @@ unsigned long get_board_ddr_clk(void);#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds"#define CONFIG_SPL_WATCHDOG_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x600
@@ -99,7 +98,6 @@ unsigned long get_board_ddr_clk(void);#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds"#define CONFIG_SPL_WATCHDOG_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_TEXT_BASE 0x10000000#define CONFIG_SPL_MAX_SIZE 0x1a000
include/configs/ls1021atwr.h +0 -1
@@ -113,7 +113,6 @@#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds"#define CONFIG_SPL_WATCHDOG_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8#ifdef CONFIG_SECURE_BOOT
include/configs/ls1043a_common.h +0 -2
@@ -61,7 +61,6 @@#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"#define CONFIG_SPL_WATCHDOG_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xf0#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x500
@@ -85,7 +84,6 @@#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"#define CONFIG_SPL_WATCHDOG_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_TEXT_BASE 0x10000000#define CONFIG_SPL_MAX_SIZE 0x1a000#define CONFIG_SPL_STACK 0x1001d000
include/configs/ls2080a_common.h +0 -1
@@ -268,7 +268,6 @@ unsigned long long get_qixis_addr(void);#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"#define CONFIG_SPL_MAX_SIZE 0x16000 -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_STACK (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0)#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"#define CONFIG_SPL_TEXT_BASE 0x1800a000
include/configs/m53evk.h +0 -1
@@ -239,7 +239,6 @@#define CONFIG_SPL_TEXT_BASE 0x70008000#define CONFIG_SPL_PAD_TO 0x8000#define CONFIG_SPL_STACK 0x70004000 -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SPL_PAD_TO#define CONFIG_SYS_NAND_PAGE_SIZE 2048
include/configs/ma5d4evk.h +0 -2
@@ -216,8 +216,6 @@#define CONFIG_SYS_SPL_MALLOC_START 0x20080000#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SYS_MONITOR_LEN (512 << 10)
include/configs/maxbcm.h +0 -2
@@ -84,8 +84,6 @@#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10))#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) -#define CONFIG_SPL_SERIAL_SUPPORT -/* SPL related SPI defines */ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT
include/configs/mcx.h +0 -1
@@ -320,7 +320,6 @@#define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NAND_SIMPLE -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC
include/configs/microblaze-generic.h +0 -1
@@ -285,7 +285,6 @@/* SPL part */ #define CONFIG_CMD_SPL #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_LDSCRIPT "arch/microblaze/cpu/u-boot-spl.lds"
include/configs/mx31pdk.h +0 -1
@@ -31,7 +31,6 @@#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds"#define CONFIG_SPL_MAX_SIZE 2048 -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_TEXT_BASE 0x87dc0000#define CONFIG_SYS_TEXT_BASE 0x87e00000
include/configs/mxs.h +0 -1
@@ -49,7 +49,6 @@#define CONFIG_SPL_NO_CPU_SUPPORT_CODE #define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/mxs"#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" -#define CONFIG_SPL_SERIAL_SUPPORT /* Memory sizes */ #define CONFIG_SYS_MALLOC_LEN 0x00400000/* 4 MB for malloc */
include/configs/omap3_evm.h +0 -1
@@ -346,7 +346,6 @@#define CONFIG_SPL_BSS_MAX_SIZE 0x80000/* 512 KB */ #define CONFIG_SPL_BOARD_INIT -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_OMAP3_ID_NAND #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
include/configs/omapl138_lcdk.h +0 -1
@@ -268,7 +268,6 @@#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \ CONFIG_SYS_MALLOC_LEN)#define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_LDSCRIPT "board/$(BOARDDIR)/u-boot-spl-da850evm.lds"#define CONFIG_SPL_STACK 0x8001ff00#define CONFIG_SPL_TEXT_BASE 0x80000000
include/configs/p1_p2_rdb_pc.h +0 -4
@@ -181,7 +181,6 @@#endif #ifdef CONFIG_SDCARD -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_MMC_MINIMAL #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
@@ -203,7 +202,6 @@#endif #ifdef CONFIG_SPIFLASH -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_FLASH_MINIMAL
@@ -231,7 +229,6 @@#define CONFIG_SPL_NAND_BOOT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_NAND_INIT -#define CONFIG_TPL_SERIAL_SUPPORT #define CONFIG_SPL_COMMON_INIT_DDR #define CONFIG_SPL_MAX_SIZE (128 << 10)#define CONFIG_SPL_TEXT_BASE 0xf8f81000
@@ -242,7 +239,6 @@#define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10)#elif defined(CONFIG_SPL_BUILD )#define CONFIG_SPL_INIT_MINIMAL -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin"#define CONFIG_SPL_TEXT_BASE 0xff800000
include/configs/picosam9g45.h +0 -1
@@ -163,7 +163,6 @@#define CONFIG_SPL_MAX_SIZE 0x010000#define CONFIG_SPL_STACK 0x310000 -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_WATCHDOG_SUPPORT #define CONFIG_SYS_MONITOR_LEN 0x80000
include/configs/rk3036_common.h +0 -2
@@ -24,8 +24,6 @@#define CONFIG_SYS_TIMER_BASE 0x200440a0/* TIMER5 */ #define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMER_BASE + 8) -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_MEM32
include/configs/rk3288_common.h +0 -1
@@ -24,7 +24,6 @@#define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMER_BASE + 8)#define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SYS_NS16550_MEM32 #define CONFIG_SPL_BOARD_INIT
include/configs/sama5d2_ptc.h +0 -2
@@ -121,8 +121,6 @@#define CONFIG_SYS_SPL_MALLOC_START 0x20080000#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SYS_MONITOR_LEN (512 << 10)
include/configs/sama5d2_xplained.h +0 -2
@@ -125,8 +125,6 @@#define CONFIG_SYS_SPL_MALLOC_START 0x20080000#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SYS_MONITOR_LEN (512 << 10)
include/configs/sama5d3_xplained.h +0 -2
@@ -124,8 +124,6 @@#define CONFIG_SYS_SPL_MALLOC_START 0x20080000#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SYS_MONITOR_LEN (512 << 10)
include/configs/sama5d3xek.h +0 -2
@@ -164,8 +164,6 @@#define CONFIG_SYS_SPL_MALLOC_START 0x20080000#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SYS_MONITOR_LEN (512 << 10)
include/configs/sama5d4_xplained.h +0 -2
@@ -124,8 +124,6 @@#define CONFIG_SYS_SPL_MALLOC_START 0x20080000#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SYS_MONITOR_LEN (512 << 10)
include/configs/sama5d4ek.h +0 -2
@@ -122,8 +122,6 @@#define CONFIG_SYS_SPL_MALLOC_START 0x20080000#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SYS_MONITOR_LEN (512 << 10)
include/configs/sandbox_spl.h +0 -1
@@ -11,6 +11,5 @@#define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_SERIAL_SUPPORT #endif
include/configs/siemens-am33x-common.h +0 -1
@@ -135,7 +135,6 @@#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"#define CONFIG_FS_FAT -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_YMODEM_SUPPORT #define CONFIG_SPL_WATCHDOG_SUPPORT
include/configs/sniper.h +0 -2
@@ -137,8 +137,6 @@#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"#define CONFIG_SPL_BOARD_INIT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 2#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
include/configs/socfpga_common.h +0 -1
@@ -323,7 +323,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void);#define CONFIG_SPL_MAX_SIZE (64 * 1024)#define CONFIG_SPL_WATCHDOG_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT #ifdef CONFIG_DM_SPI #define CONFIG_SPL_SPI_SUPPORT #endif
include/configs/sunxi-common.h +0 -1
@@ -188,7 +188,6 @@#define CONFIG_FAT_WRITE /* enable write access */ #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_BOARD_LOAD_IMAGE
include/configs/tam3517-common.h +0 -1
@@ -201,7 +201,6 @@#define CONFIG_SPL_NAND_SOFTECC #define CONFIG_SPL_NAND_WORKSPACE 0x8f07f000/* below BSS */ -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC
include/configs/tao3530.h +0 -1
@@ -288,7 +288,6 @@#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"#define CONFIG_SPL_BOARD_INIT -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC
include/configs/taurus.h +0 -2
@@ -258,8 +258,6 @@#define CONFIG_SPL_BSS_START_ADDR CONFIG_SPL_MAX_SIZE#define CONFIG_SPL_BSS_MAX_SIZE (3 * SZ_512) -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_BOARD_INIT #define CONFIG_SYS_NAND_ENABLE_PIN_SPL (2*32 + 14)#define CONFIG_SYS_USE_NANDFLASH 1
include/configs/tegra-common.h +0 -2
@@ -122,8 +122,6 @@ CONFIG_SPL_TEXT_BASE)#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00010000 -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_BOARD_LATE_INIT
include/configs/theadorable.h +0 -2
@@ -149,8 +149,6 @@#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10))#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) -#define CONFIG_SPL_SERIAL_SUPPORT -/* SPL related SPI defines */ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT
include/configs/ti814x_evm.h +0 -1
@@ -167,7 +167,6 @@#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_YMODEM_SUPPORT #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000
include/configs/ti816x_evm.h +0 -1
@@ -133,7 +133,6 @@#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_YMODEM_SUPPORT #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000
include/configs/ti_armv7_common.h +0 -1
@@ -263,7 +263,6 @@#define CONFIG_SYS_THUMB_BUILD /* General parts of the framework, required. */ -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_BOARD_INIT #ifdef CONFIG_NAND
include/configs/tricorder.h +0 -1
@@ -319,7 +319,6 @@#define CONFIG_SPL_NAND_SIMPLE #define CONFIG_SPL_BOARD_INIT -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC
include/configs/uniphier.h +0 -1
@@ -277,7 +277,6 @@#define CONFIG_PANIC_HANG #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_SERIAL_SUPPORT #ifdef CONFIG_ARM64 #define CONFIG_SPL_BOARD_LOAD_IMAGE #endif
include/configs/woodburn_sd.h +0 -1
@@ -22,7 +22,6 @@*/ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm1136/u-boot-spl.lds" -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_BOARD_INIT #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x100/* address 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400/* 512 KB */
include/configs/work_92105.h +0 -1
@@ -189,7 +189,6 @@/* Use the framework and generic lib */ #define CONFIG_SPL_FRAMEWORK /* SPL will use serial */ -#define CONFIG_SPL_SERIAL_SUPPORT /* SPL will load U-Boot from NAND offset 0x40000 */ #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_BASE
include/configs/x600.h +0 -1
@@ -267,7 +267,6 @@#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds"#define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_SERIAL_SUPPORT /* * Please select/define only one of the following
include/configs/xilinx_zynqmp.h +0 -1
@@ -260,7 +260,6 @@#define CONFIG_SPL_BSS_MAX_SIZE 0x2000000#define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_RAM_DEVICE
include/configs/zynq-common.h +0 -1
@@ -293,7 +293,6 @@/* SPL part */ #define CONFIG_CMD_SPL #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_RAM_DEVICE
Signature · 1 line
2.8.0.rc3.226.g39d4020
PATCH v3 38/45 Convert CONFIG_SPL_SERIAL_SUPPORT to Kconfig
Quoted 3 lines · Simon Glass
Move this option to
Kconfigand tidy up existing uses.Signed-off-by Simon Glass <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160918/07d9d03e/attachment.sig>
PATCH v3 39/45 Convert CONFIG_SPL_SPI_FLASH_SUPPORT to Kconfig
In reply to Simon GlassMove this option to Kconfig and tidy up existing uses.
Signed-off-by Simon Glass <[email protected]>
---
Changes in v3: None
Changes in v2: None
arch/arm/cpu/armv8/zynqmp/Kconfig | 3 +++ arch/arm/mach-socfpga/Kconfig | 3 +++ arch/arm/mach-zynq/Kconfig | 3 +++ configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig | 1 + configs/P1010RDB-PA_SPIFLASH_defconfig | 1 + configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig | 1 + configs/P1010RDB-PB_SPIFLASH_defconfig | 1 + configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig | 1 + configs/P1020RDB-PC_SPIFLASH_defconfig | 1 + configs/P1020RDB-PD_SPIFLASH_defconfig | 1 + configs/P1021RDB-PC_36BIT_SPIFLASH_defconfig | 1 + configs/P1021RDB-PC_SPIFLASH_defconfig | 1 + configs/P1022DS_36BIT_SPIFLASH_defconfig | 1 + configs/P1022DS_SPIFLASH_defconfig | 1 + configs/P1024RDB_SPIFLASH_defconfig | 1 + configs/P1025RDB_SPIFLASH_defconfig | 1 + configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig | 1 + configs/P2020RDB-PC_SPIFLASH_defconfig | 1 + configs/T1023RDB_SPIFLASH_defconfig | 1 + configs/T1024QDS_SPIFLASH_defconfig | 1 + configs/T1024RDB_SPIFLASH_defconfig | 1 + configs/T1040D4RDB_SPIFLASH_defconfig | 1 + configs/T1040RDB_SPIFLASH_defconfig | 1 + configs/T1042D4RDB_SPIFLASH_defconfig | 1 + configs/T1042RDB_PI_SPIFLASH_defconfig | 1 + configs/T2080QDS_SPIFLASH_defconfig | 1 + configs/T2080RDB_SPIFLASH_defconfig | 1 + configs/T2081QDS_SPIFLASH_defconfig | 1 + configs/am335x_evm_spiboot_defconfig | 1 + configs/am57xx_evm_defconfig | 1 + configs/am57xx_evm_nodt_defconfig | 1 + configs/am57xx_hs_evm_defconfig | 1 + configs/at91sam9n12ek_spiflash_defconfig | 1 + configs/at91sam9x5ek_spiflash_defconfig | 1 + configs/axm_defconfig | 1 + configs/brppt1_spi_defconfig | 1 + configs/cgtqmx6eval_defconfig | 1 + configs/chromebook_jerry_defconfig | 1 + configs/cm_fx6_defconfig | 1 + configs/cm_t43_defconfig | 1 + configs/cm_t54_defconfig | 2 ++ configs/da850_am18xxevm_defconfig | 1 + configs/da850evm_defconfig | 1 + configs/db-88f6720_defconfig | 1 + configs/db-88f6820-gp_defconfig | 1 + configs/db-mv784mp-gp_defconfig | 1 + configs/dra7xx_evm_defconfig | 1 + configs/dra7xx_hs_evm_defconfig | 1 + configs/draco_defconfig | 1 + configs/ds414_defconfig | 1 + configs/etamin_defconfig | 1 + configs/k2e_evm_defconfig | 1 + configs/k2g_evm_defconfig | 1 + configs/k2hk_evm_defconfig | 1 + configs/k2l_evm_defconfig | 1 + configs/ma5d4evk_defconfig | 1 + configs/maxbcm_defconfig | 1 + configs/ot1200_spl_defconfig | 1 + configs/pcm058_defconfig | 1 + configs/pxm2_defconfig | 1 + configs/rastaban_defconfig | 1 + configs/rut_defconfig | 1 + configs/sama5d2_ptc_spiflash_defconfig | 1 + configs/sama5d2_xplained_spiflash_defconfig | 1 + configs/sama5d3xek_spiflash_defconfig | 1 + configs/sama5d4_xplained_spiflash_defconfig | 1 + configs/sama5d4ek_spiflash_defconfig | 1 + configs/taurus_defconfig | 1 + configs/theadorable_debug_defconfig | 1 + configs/theadorable_defconfig | 1 + configs/thuban_defconfig | 1 + configs/xilinx_zynqmp_zc1751_xm016_dc2_defconfig | 1 + configs/zc5202_defconfig | 1 + configs/zc5601_defconfig | 1 + include/configs/P1010RDB.h | 1 - include/configs/P1022DS.h | 1 - include/configs/T102xQDS.h | 1 - include/configs/T102xRDB.h | 1 - include/configs/T104xRDB.h | 1 - include/configs/T208xQDS.h | 1 - include/configs/T208xRDB.h | 1 - include/configs/am335x_evm.h | 1 - include/configs/am57xx_evm.h | 1 - include/configs/at91sam9n12ek.h | 1 - include/configs/at91sam9x5ek.h | 1 - include/configs/bav335x.h | 1 - include/configs/brppt1.h | 1 - include/configs/cgtqmx6eval.h | 1 - include/configs/chromebook_jerry.h | 1 - include/configs/clearfog.h | 1 - include/configs/cm_fx6.h | 1 - include/configs/cm_t43.h | 1 - include/configs/da850evm.h | 2 -- include/configs/db-88f6720.h | 1 - include/configs/db-88f6820-gp.h | 1 - include/configs/db-mv784mp-gp.h | 1 - include/configs/dra7xx_evm.h | 1 - include/configs/ds414.h | 1 - include/configs/el6x_common.h | 1 - include/configs/ma5d4evk.h | 1 - include/configs/maxbcm.h | 1 - include/configs/omapl138_lcdk.h | 1 - include/configs/ot1200.h | 1 - include/configs/p1_p2_rdb_pc.h | 1 - include/configs/pcm051.h | 1 - include/configs/pcm058.h | 1 - include/configs/sama5d2_ptc.h | 1 - include/configs/sama5d2_xplained.h | 1 - include/configs/sama5d3xek.h | 1 - include/configs/sama5d4_xplained.h | 1 - include/configs/sama5d4ek.h | 1 - include/configs/siemens-am33x-common.h | 1 - include/configs/socfpga_common.h | 1 - include/configs/sunxi-common.h | 1 - include/configs/taurus.h | 1 - include/configs/theadorable.h | 1 - include/configs/ti_armv7_keystone2.h | 1 - include/configs/zynq-common.h | 1 - 118 files changed, 81 insertions(+), 45 deletions(-)
arch/arm/cpu/armv8/zynqmp/Kconfig +3 -0
@@ -18,6 +18,9 @@ config SPL_MMC_SUPPORT config SPL_SERIAL_SUPPORT default y +config SPL_SPI_FLASH_SUPPORT + default y if ZYNQ_QSPI + config SYS_BOARD default "zynqmp"
arch/arm/mach-socfpga/Kconfig +3 -0
@@ -18,6 +18,9 @@ config SPL_NAND_SUPPORT config SPL_SERIAL_SUPPORT default y +config SPL_SPI_FLASH_SUPPORT + default y if DM_SPI + config TARGET_SOCFPGA_ARRIA5 bool select TARGET_SOCFPGA_GEN5
arch/arm/mach-zynq/Kconfig +3 -0
@@ -18,6 +18,9 @@ config SPL_MMC_SUPPORT config SPL_SERIAL_SUPPORT default y +config SPL_SPI_FLASH_SUPPORT + default y if ZYNQ_QSPI + config SYS_BOARD default "zynq"
configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_PHYS_64BIT=y
configs/P1010RDB-PA_SPIFLASH_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_FIT=y
configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_PHYS_64BIT=y
configs/P1010RDB-PB_SPIFLASH_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_FIT=y
configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_PHYS_64BIT=y
configs/P1020RDB-PC_SPIFLASH_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_FIT=y
configs/P1020RDB-PD_SPIFLASH_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_FIT=y
configs/P1021RDB-PC_36BIT_SPIFLASH_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_PHYS_64BIT=y
configs/P1021RDB-PC_SPIFLASH_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_FIT=y
configs/P1022DS_36BIT_SPIFLASH_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1022DS=y CONFIG_PHYS_64BIT=y
configs/P1022DS_SPIFLASH_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1022DS=y CONFIG_FIT=y
configs/P1024RDB_SPIFLASH_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_FIT=y
configs/P1025RDB_SPIFLASH_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_FIT=y
configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_PHYS_64BIT=y
configs/P2020RDB-PC_SPIFLASH_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_FIT=y
configs/T1023RDB_SPIFLASH_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T102XRDB=y CONFIG_FIT=y
configs/T1024QDS_SPIFLASH_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T102XQDS=y CONFIG_FIT=y
configs/T1024RDB_SPIFLASH_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T102XRDB=y CONFIG_FIT=y
configs/T1040D4RDB_SPIFLASH_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y CONFIG_FIT=y
configs/T1040RDB_SPIFLASH_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y CONFIG_FIT=y
configs/T1042D4RDB_SPIFLASH_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y CONFIG_FIT=y
configs/T1042RDB_PI_SPIFLASH_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y CONFIG_FIT=y
configs/T2080QDS_SPIFLASH_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T208XQDS=y CONFIG_FIT=y
configs/T2080RDB_SPIFLASH_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T208XRDB=y CONFIG_FIT=y
configs/T2081QDS_SPIFLASH_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T208XQDS=y CONFIG_FIT=y
configs/am335x_evm_spiboot_defconfig +1 -0
@@ -1,5 +1,6 @@ CONFIG_ARM=y CONFIG_TARGET_AM335X_EVM=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SPI_BOOT"
configs/am57xx_evm_defconfig +1 -0
@@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_OMAP54XX=y CONFIG_TARGET_AM57XX_EVM=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_DEFAULT_DEVICE_TREE="am57xx-beagle-x15" CONFIG_FIT=y
configs/am57xx_evm_nodt_defconfig +1 -0
@@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_OMAP54XX=y CONFIG_TARGET_AM57XX_EVM=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y CONFIG_SPL_DMA_SUPPORT=y
configs/am57xx_hs_evm_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_OMAP54XX=y CONFIG_TI_SECURE_DEVICE=y CONFIG_TARGET_AM57XX_EVM=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_DEFAULT_DEVICE_TREE="am57xx-beagle-x15" CONFIG_FIT=y
configs/at91sam9n12ek_spiflash_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9N12,SYS_USE_SPIFLASH" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/at91sam9x5ek_spiflash_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9X5,SYS_USE_SPIFLASH" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/axm_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="at91sam9g20-taurus" CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2068,BOARD_AXM" CONFIG_BOOTDELAY=3
configs/brppt1_spi_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,SPI_BOOT,EMMC_BOOT" CONFIG_SPI_BOOT=y
configs/cgtqmx6eval_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,SPL,MX6QDL" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/chromebook_jerry_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_POWER_SUPPORT=y CONFIG_ROCKCHIP_RK3288=y CONFIG_TARGET_CHROMEBOOK_JERRY=y CONFIG_ROCKCHIP_FAST_SPL=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_STACK_R_ADDR=0x80000 CONFIG_DM_KEYBOARD=y CONFIG_DEFAULT_DEVICE_TREE="rk3288-jerry"
configs/cm_fx6_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_TARGET_CM_FX6=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL,SPL" CONFIG_BOOTDELAY=3
configs/cm_t43_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y CONFIG_SPL_MTD_SUPPORT=y
configs/cm_t54_defconfig +2 -0
@@ -5,7 +5,9 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=3 CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y +# CONFIG_SPL_NAND_SUPPORT is not set CONFIG_SPL_SATA_SUPPORT=y +# CONFIG_SPL_SPI_FLASH_SUPPORT is not set CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="CM-T54 # " CONFIG_CMD_BOOTZ=y
configs/da850_am18xxevm_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_TARGET_DA850EVM=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="DA850_AM18X_EVM,MAC_ADDR_IN_EEPROM,SYS_I2C_EEPROM_ADDR_LEN=2,SYS_I2C_EEPROM_ADDR=0x50" CONFIG_BOOTDELAY=3 CONFIG_VERSION_VARIABLE=y
configs/da850evm_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_TARGET_DA850EVM=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="MAC_ADDR_IN_SPIFLASH" CONFIG_BOOTDELAY=3 CONFIG_VERSION_VARIABLE=y
configs/db-88f6720_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_TARGET_DB_88F6720=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="armada-375-db" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_BOOTDELAY=3
configs/db-88f6820-gp_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_TARGET_DB_88F6820_GP=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="armada-388-gp" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/db-mv784mp-gp_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_TARGET_DB_MV784MP_GP=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="armada-xp-gp" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_BOOTDELAY=3
configs/dra7xx_evm_defconfig +1 -0
@@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_OMAP54XX=y CONFIG_TARGET_DRA7XX_EVM=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_DEFAULT_DEVICE_TREE="dra7-evm" CONFIG_FIT=y
configs/dra7xx_hs_evm_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_OMAP54XX=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TI_SECURE_DEVICE=y CONFIG_TARGET_DRA7XX_EVM=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_DEFAULT_DEVICE_TREE="dra7-evm" CONFIG_FIT=y
configs/draco_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-draco" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/ds414_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_TARGET_DS414=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="armada-xp-synology-ds414" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/etamin_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-draco" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/k2e_evm_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_TARGET_K2E_EVM=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="k2e-evm" CONFIG_OF_BOARD_SETUP=y CONFIG_VERSION_VARIABLE=y
configs/k2g_evm_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_TARGET_K2G_EVM=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="k2g-evm" CONFIG_OF_BOARD_SETUP=y CONFIG_VERSION_VARIABLE=y
configs/k2hk_evm_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_TARGET_K2HK_EVM=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="k2hk-evm" CONFIG_OF_BOARD_SETUP=y CONFIG_VERSION_VARIABLE=y
configs/k2l_evm_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_TARGET_K2L_EVM=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="k2l-evm" CONFIG_OF_BOARD_SETUP=y CONFIG_VERSION_VARIABLE=y
configs/ma5d4evk_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4" CONFIG_BOOTDELAY=3
configs/maxbcm_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_TARGET_MAXBCM=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="armada-xp-maxbcm" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/ot1200_spl_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_TARGET_OT1200=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/pcm058_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q" CONFIG_BOOTDELAY=3
configs/pxm2_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-pxm50" CONFIG_FIT=y CONFIG_BOOTDELAY=3
configs/rastaban_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-draco" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/rut_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-rut" CONFIG_FIT=y CONFIG_BOOTDELAY=3
configs/sama5d2_ptc_spiflash_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2,SYS_USE_SERIALFLASH" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/sama5d2_xplained_spiflash_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2,SYS_USE_SERIALFLASH" CONFIG_BOOTDELAY=3
configs/sama5d3xek_spiflash_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_SERIALFLASH" CONFIG_BOOTDELAY=3
configs/sama5d4_xplained_spiflash_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_SERIALFLASH" CONFIG_BOOTDELAY=3
configs/sama5d4ek_spiflash_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_SERIALFLASH" CONFIG_BOOTDELAY=3
configs/taurus_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="at91sam9g20-taurus" CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2067,BOARD_TAURUS" CONFIG_BOOTDELAY=3
configs/theadorable_debug_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_TARGET_THEADORABLE=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="armada-xp-theadorable" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_FIT=y
configs/theadorable_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_TARGET_THEADORABLE=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="armada-xp-theadorable" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_FIT=y
configs/thuban_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-draco" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/xilinx_zynqmp_zc1751_xm016_dc2_defconfig +1 -0
@@ -12,6 +12,7 @@ CONFIG_SPL=y # CONFIG_SPL_FAT_SUPPORT is not set # CONFIG_SPL_LIBDISK_SUPPORT is not set # CONFIG_SPL_MMC_SUPPORT is not set +# CONFIG_SPL_FLASH_SUPPORT is not set CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="ZynqMP> "
configs/zc5202_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/zc5601_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
include/configs/P1010RDB.h +0 -1
@@ -46,7 +46,6 @@#define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc#else #define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_FLASH_MINIMAL #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
include/configs/P1022DS.h +0 -1
@@ -36,7 +36,6 @@#ifdef CONFIG_SPIFLASH #define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_FLASH_MINIMAL #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
include/configs/T102xQDS.h +0 -1
@@ -71,7 +71,6 @@#ifdef CONFIG_SPIFLASH #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_FLASH_MINIMAL #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10)#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x00200000)
include/configs/T102xRDB.h +0 -1
@@ -78,7 +78,6 @@#ifdef CONFIG_SPIFLASH #define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_FLASH_MINIMAL #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10)#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x30000000)
include/configs/T104xRDB.h +0 -1
@@ -81,7 +81,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg#ifdef CONFIG_SPIFLASH #define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_FLASH_MINIMAL #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10)#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x30000000)
include/configs/T208xQDS.h +0 -1
@@ -81,7 +81,6 @@#ifdef CONFIG_SPIFLASH #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_FLASH_MINIMAL #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10)#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x00200000)
include/configs/T208xRDB.h +0 -1
@@ -70,7 +70,6 @@#ifdef CONFIG_SPIFLASH #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_FLASH_MINIMAL #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10)#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x00200000)
include/configs/am335x_evm.h +0 -1
@@ -391,7 +391,6 @@/* SPL related */ #undef CONFIG_SPL_OS_BOOT/* Not supported by existing map */ #define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
include/configs/am57xx_evm.h +0 -1
@@ -107,7 +107,6 @@#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_TI_EDMA3 #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000/* SPI */
include/configs/at91sam9n12ek.h +0 -1
@@ -259,7 +259,6 @@#elif CONFIG_SYS_USE_SPIFLASH #define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8400
include/configs/at91sam9x5ek.h +0 -1
@@ -259,7 +259,6 @@#elif CONFIG_SYS_USE_SPIFLASH #define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8400
include/configs/bav335x.h +0 -1
@@ -523,7 +523,6 @@ DEFAULT_LINUX_BOOT_ENV \/* SPL related */ #undef CONFIG_SPL_OS_BOOT/* Not supported by existing map */ #define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
include/configs/brppt1.h +0 -1
@@ -255,7 +255,6 @@ MMCARGS#define CONFIG_SF_DEFAULT_SPEED 24000000#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000#undef CONFIG_ENV_IS_NOWHERE
include/configs/cgtqmx6eval.h +0 -1
@@ -19,7 +19,6 @@#ifdef CONFIG_SPL #define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024)#define CONFIG_SPL_SPI_LOAD #include "imx6_spl.h"
include/configs/chromebook_jerry.h +0 -1
@@ -16,7 +16,6 @@#define CONFIG_ENV_IS_NOWHERE #define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SPI_FLASH_GIGADEVICE
include/configs/clearfog.h +0 -1
@@ -126,7 +126,6 @@#if CONFIG_SPL_BOOT_DEVICE ==SPL_BOOT_SPI_NOR_FLASH /* SPL related SPI defines */ #define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS
include/configs/cm_fx6.h +0 -1
@@ -250,7 +250,6 @@#undef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x80/* offset 64 kb */ #define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024)#define CONFIG_SPL_SPI_LOAD
include/configs/cm_t43.h +0 -1
@@ -155,7 +155,6 @@#define CONFIG_SYS_MONITOR_LEN (512 * 1024)#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x480#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD /* EEPROM */
include/configs/da850evm.h +0 -2
@@ -148,7 +148,6 @@#ifdef CONFIG_USE_SPIFLASH #define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000
@@ -340,7 +339,6 @@ CONFIG_SYS_MALLOC_LEN)#define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SPL_LDSCRIPT "board/$(BOARDDIR)/u-boot-spl-da850evm.lds"#define CONFIG_SPL_STACK 0x8001ff00
include/configs/db-88f6720.h +0 -1
@@ -93,7 +93,6 @@/* SPL related SPI defines */ #define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS
include/configs/db-88f6820-gp.h +0 -1
@@ -127,7 +127,6 @@#if CONFIG_SPL_BOOT_DEVICE ==SPL_BOOT_SPI_NOR_FLASH /* SPL related SPI defines */ #define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x24000#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS
include/configs/db-mv784mp-gp.h +0 -1
@@ -118,7 +118,6 @@/* SPL related SPI defines */ #define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS
include/configs/dra7xx_evm.h +0 -1
@@ -195,7 +195,6 @@#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_TI_EDMA3 #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000#define CONFIG_SUPPORT_EMMC_BOOT
include/configs/ds414.h +0 -1
@@ -124,7 +124,6 @@/* SPL related SPI defines */ #define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x24000
include/configs/el6x_common.h +0 -1
@@ -26,7 +26,6 @@#ifdef CONFIG_SPL #define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024)#define CONFIG_SPL_SPI_LOAD #include "imx6_spl.h"
include/configs/ma5d4evk.h +0 -1
@@ -220,7 +220,6 @@#define CONFIG_SYS_MONITOR_LEN (512 << 10)#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x10000
include/configs/maxbcm.h +0 -1
@@ -86,7 +86,6 @@/* SPL related SPI defines */ #define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
include/configs/omapl138_lcdk.h +0 -1
@@ -98,7 +98,6 @@#ifdef CONFIG_USE_SPIFLASH #define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x30000
include/configs/ot1200.h +0 -1
@@ -81,7 +81,6 @@#ifdef CONFIG_SPL #include "imx6_spl.h" #define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024)#define CONFIG_SPL_SPI_LOAD #endif
include/configs/p1_p2_rdb_pc.h +0 -1
@@ -203,7 +203,6 @@#ifdef CONFIG_SPIFLASH #define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_FLASH_MINIMAL #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
include/configs/pcm051.h +0 -1
@@ -125,7 +125,6 @@#ifdef CONFIG_SPI_BOOT #define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000
include/configs/pcm058.h +0 -1
@@ -13,7 +13,6 @@#ifdef CONFIG_SPL #define CONFIG_SPL_YMODEM_SUPPORT #define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024)#include "imx6_spl.h"
include/configs/sama5d2_ptc.h +0 -1
@@ -126,7 +126,6 @@#ifdef CONFIG_SYS_USE_SERIALFLASH #define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000
include/configs/sama5d2_xplained.h +0 -1
@@ -137,7 +137,6 @@#elif CONFIG_SYS_USE_SERIALFLASH #define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000
include/configs/sama5d3xek.h +0 -1
@@ -188,7 +188,6 @@#elif CONFIG_SYS_USE_SERIALFLASH #define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000
include/configs/sama5d4_xplained.h +0 -1
@@ -150,7 +150,6 @@#elif CONFIG_SYS_USE_SERIALFLASH #define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000
include/configs/sama5d4ek.h +0 -1
@@ -148,7 +148,6 @@#elif CONFIG_SYS_USE_SERIALFLASH #define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000
include/configs/siemens-am33x-common.h +0 -1
@@ -140,7 +140,6 @@#define CONFIG_SPL_WATCHDOG_SUPPORT #define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
include/configs/socfpga_common.h +0 -1
@@ -340,7 +340,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void);/* SPL QSPI boot support */ #ifdef CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000#endif
include/configs/sunxi-common.h +0 -1
@@ -139,7 +139,6 @@#endif #ifdef CONFIG_SPL_SPI_SUNXI -#define CONFIG_SPL_SPI_FLASH_SUPPORT 1#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000#endif
include/configs/taurus.h +0 -1
@@ -144,7 +144,6 @@/* SPL related */ #undef CONFIG_SPL_OS_BOOT/* Not supported by existing map */ #define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
include/configs/theadorable.h +0 -1
@@ -151,7 +151,6 @@/* SPL related SPI defines */ #define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x1a000#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS
include/configs/ti_armv7_keystone2.h +0 -1
@@ -54,7 +54,6 @@ CONFIG_SYS_SPL_MALLOC_SIZE + \ SPL_MALLOC_F_SIZE + \ CONFIG_SPL_STACK_SIZE - 4) -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS CONFIG_SPL_PAD_TO
include/configs/zynq-common.h +0 -1
@@ -327,7 +327,6 @@#ifdef CONFIG_ZYNQ_QSPI #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x100000#define CONFIG_SYS_SPI_ARGS_OFFS 0x200000#define CONFIG_SYS_SPI_ARGS_SIZE 0x80000
Signature · 1 line
2.8.0.rc3.226.g39d4020
PATCH v3 39/45 Convert CONFIG_SPL_SPI_FLASH_SUPPORT to Kconfig
Quoted 3 lines · Simon Glass
Move this option to
Kconfigand tidy up existing uses.Signed-off-by Simon Glass <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160918/37515575/attachment.sig>
PATCH v3 40/45 Convert CONFIG_SPL_SPI_SUPPORT to Kconfig
In reply to Simon GlassMove this option to Kconfig and tidy up existing uses.
Signed-off-by Simon Glass <[email protected]>
---
Changes in v3: None
Changes in v2: None
arch/arm/cpu/armv8/zynqmp/Kconfig | 3 +++ arch/arm/mach-socfpga/Kconfig | 3 +++ arch/arm/mach-zynq/Kconfig | 3 +++ configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig | 1 + configs/P1010RDB-PA_SPIFLASH_defconfig | 1 + configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig | 1 + configs/P1010RDB-PB_SPIFLASH_defconfig | 1 + configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig | 1 + configs/P1020RDB-PC_SPIFLASH_defconfig | 1 + configs/P1020RDB-PD_SPIFLASH_defconfig | 1 + configs/P1021RDB-PC_36BIT_SPIFLASH_defconfig | 1 + configs/P1021RDB-PC_SPIFLASH_defconfig | 1 + configs/P1022DS_36BIT_SPIFLASH_defconfig | 1 + configs/P1022DS_SPIFLASH_defconfig | 1 + configs/P1024RDB_SPIFLASH_defconfig | 1 + configs/P1025RDB_SPIFLASH_defconfig | 1 + configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig | 1 + configs/P2020RDB-PC_SPIFLASH_defconfig | 1 + configs/T1023RDB_SPIFLASH_defconfig | 1 + configs/T1024QDS_SPIFLASH_defconfig | 1 + configs/T1024RDB_SPIFLASH_defconfig | 1 + configs/T1040D4RDB_SPIFLASH_defconfig | 1 + configs/T1040RDB_SPIFLASH_defconfig | 1 + configs/T1042D4RDB_SPIFLASH_defconfig | 1 + configs/T1042RDB_PI_SPIFLASH_defconfig | 1 + configs/T2080QDS_SPIFLASH_defconfig | 1 + configs/T2080RDB_SPIFLASH_defconfig | 1 + configs/T2081QDS_SPIFLASH_defconfig | 1 + configs/am335x_evm_spiboot_defconfig | 1 + configs/am57xx_evm_defconfig | 1 + configs/am57xx_evm_nodt_defconfig | 1 + configs/am57xx_hs_evm_defconfig | 1 + configs/at91sam9n12ek_spiflash_defconfig | 1 + configs/at91sam9x5ek_spiflash_defconfig | 1 + configs/axm_defconfig | 1 + configs/brppt1_spi_defconfig | 1 + configs/cgtqmx6eval_defconfig | 1 + configs/chromebook_jerry_defconfig | 1 + configs/cm_fx6_defconfig | 1 + configs/cm_t43_defconfig | 1 + configs/da850_am18xxevm_defconfig | 1 + configs/da850evm_defconfig | 1 + configs/db-88f6720_defconfig | 1 + configs/db-88f6820-gp_defconfig | 1 + configs/db-mv784mp-gp_defconfig | 1 + configs/dra7xx_evm_defconfig | 1 + configs/dra7xx_hs_evm_defconfig | 1 + configs/draco_defconfig | 1 + configs/ds414_defconfig | 1 + configs/etamin_defconfig | 1 + configs/k2e_evm_defconfig | 1 + configs/k2g_evm_defconfig | 1 + configs/k2hk_evm_defconfig | 1 + configs/k2l_evm_defconfig | 1 + configs/ma5d4evk_defconfig | 1 + configs/maxbcm_defconfig | 1 + configs/ot1200_spl_defconfig | 1 + configs/pcm058_defconfig | 1 + configs/pxm2_defconfig | 1 + configs/rastaban_defconfig | 1 + configs/rut_defconfig | 1 + configs/sama5d2_ptc_spiflash_defconfig | 1 + configs/sama5d2_xplained_spiflash_defconfig | 1 + configs/sama5d3xek_spiflash_defconfig | 1 + configs/sama5d4_xplained_spiflash_defconfig | 1 + configs/sama5d4ek_spiflash_defconfig | 1 + configs/taurus_defconfig | 1 + configs/theadorable_debug_defconfig | 1 + configs/theadorable_defconfig | 1 + configs/thuban_defconfig | 1 + configs/zc5202_defconfig | 1 + configs/zc5601_defconfig | 1 + include/configs/P1010RDB.h | 1 - include/configs/P1022DS.h | 1 - include/configs/T102xQDS.h | 1 - include/configs/T102xRDB.h | 1 - include/configs/T104xRDB.h | 1 - include/configs/T208xQDS.h | 1 - include/configs/T208xRDB.h | 1 - include/configs/am335x_evm.h | 1 - include/configs/am57xx_evm.h | 1 - include/configs/at91sam9n12ek.h | 1 - include/configs/at91sam9x5ek.h | 1 - include/configs/bav335x.h | 1 - include/configs/brppt1.h | 1 - include/configs/cgtqmx6eval.h | 1 - include/configs/chromebook_jerry.h | 1 - include/configs/clearfog.h | 1 - include/configs/cm_fx6.h | 1 - include/configs/cm_t43.h | 1 - include/configs/da850evm.h | 3 --- include/configs/db-88f6720.h | 1 - include/configs/db-88f6820-gp.h | 1 - include/configs/db-mv784mp-gp.h | 1 - include/configs/dra7xx_evm.h | 1 - include/configs/ds414.h | 1 - include/configs/el6x_common.h | 1 - include/configs/ma5d4evk.h | 1 - include/configs/maxbcm.h | 1 - include/configs/omapl138_lcdk.h | 1 - include/configs/ot1200.h | 1 - include/configs/p1_p2_rdb_pc.h | 1 - include/configs/pcm051.h | 1 - include/configs/pcm058.h | 1 - include/configs/sama5d2_ptc.h | 1 - include/configs/sama5d2_xplained.h | 1 - include/configs/sama5d3xek.h | 1 - include/configs/sama5d4_xplained.h | 1 - include/configs/sama5d4ek.h | 1 - include/configs/siemens-am33x-common.h | 1 - include/configs/socfpga_common.h | 3 --- include/configs/taurus.h | 1 - include/configs/theadorable.h | 1 - include/configs/ti_armv7_keystone2.h | 1 - include/configs/tqma6.h | 3 --- include/configs/zynq-common.h | 1 - 116 files changed, 78 insertions(+), 50 deletions(-)
arch/arm/cpu/armv8/zynqmp/Kconfig +3 -0
@@ -21,6 +21,9 @@ config SPL_SERIAL_SUPPORT config SPL_SPI_FLASH_SUPPORT default y if ZYNQ_QSPI +config SPL_SPI_SUPPORT + default y if ZYNQ_QSPI + config SYS_BOARD default "zynqmp"
arch/arm/mach-socfpga/Kconfig +3 -0
@@ -19,6 +19,9 @@ config SPL_SERIAL_SUPPORT default y config SPL_SPI_FLASH_SUPPORT + default y if SPL_SPI_SUPPORT + +config SPL_SPI_SUPPORT default y if DM_SPI config TARGET_SOCFPGA_ARRIA5
arch/arm/mach-zynq/Kconfig +3 -0
@@ -21,6 +21,9 @@ config SPL_SERIAL_SUPPORT config SPL_SPI_FLASH_SUPPORT default y if ZYNQ_QSPI +config SPL_SPI_SUPPORT + default y if ZYNQ_QSPI + config SYS_BOARD default "zynq"
configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_PHYS_64BIT=y
configs/P1010RDB-PA_SPIFLASH_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_FIT=y
configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_PHYS_64BIT=y
configs/P1010RDB-PB_SPIFLASH_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1010RDB=y CONFIG_FIT=y
configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_PHYS_64BIT=y
configs/P1020RDB-PC_SPIFLASH_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_FIT=y
configs/P1020RDB-PD_SPIFLASH_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_FIT=y
configs/P1021RDB-PC_36BIT_SPIFLASH_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_PHYS_64BIT=y
configs/P1021RDB-PC_SPIFLASH_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_FIT=y
configs/P1022DS_36BIT_SPIFLASH_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1022DS=y CONFIG_PHYS_64BIT=y
configs/P1022DS_SPIFLASH_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1022DS=y CONFIG_FIT=y
configs/P1024RDB_SPIFLASH_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_FIT=y
configs/P1025RDB_SPIFLASH_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_FIT=y
configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_PHYS_64BIT=y
configs/P2020RDB-PC_SPIFLASH_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_P1_P2_RDB_PC=y CONFIG_FIT=y
configs/T1023RDB_SPIFLASH_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T102XRDB=y CONFIG_FIT=y
configs/T1024QDS_SPIFLASH_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T102XQDS=y CONFIG_FIT=y
configs/T1024RDB_SPIFLASH_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T102XRDB=y CONFIG_FIT=y
configs/T1040D4RDB_SPIFLASH_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y CONFIG_FIT=y
configs/T1040RDB_SPIFLASH_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y CONFIG_FIT=y
configs/T1042D4RDB_SPIFLASH_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y CONFIG_FIT=y
configs/T1042RDB_PI_SPIFLASH_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T104XRDB=y CONFIG_FIT=y
configs/T2080QDS_SPIFLASH_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T208XQDS=y CONFIG_FIT=y
configs/T2080RDB_SPIFLASH_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T208XRDB=y CONFIG_FIT=y
configs/T2081QDS_SPIFLASH_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_MPC85xx=y CONFIG_TARGET_T208XQDS=y CONFIG_FIT=y
configs/am335x_evm_spiboot_defconfig +1 -0
@@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_TARGET_AM335X_EVM=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SPI_BOOT"
configs/am57xx_evm_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_OMAP54XX=y CONFIG_TARGET_AM57XX_EVM=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_DEFAULT_DEVICE_TREE="am57xx-beagle-x15" CONFIG_FIT=y
configs/am57xx_evm_nodt_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_OMAP54XX=y CONFIG_TARGET_AM57XX_EVM=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y CONFIG_SPL_DMA_SUPPORT=y
configs/am57xx_hs_evm_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_OMAP54XX=y CONFIG_TI_SECURE_DEVICE=y CONFIG_TARGET_AM57XX_EVM=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_DEFAULT_DEVICE_TREE="am57xx-beagle-x15" CONFIG_FIT=y
configs/at91sam9n12ek_spiflash_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9N12,SYS_USE_SPIFLASH" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/at91sam9x5ek_spiflash_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9X5,SYS_USE_SPIFLASH" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/axm_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="at91sam9g20-taurus" CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2068,BOARD_AXM" CONFIG_BOOTDELAY=3
configs/brppt1_spi_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,SPI_BOOT,EMMC_BOOT" CONFIG_SPI_BOOT=y
configs/cgtqmx6eval_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,SPL,MX6QDL" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/chromebook_jerry_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_ROCKCHIP_RK3288=y CONFIG_TARGET_CHROMEBOOK_JERRY=y CONFIG_ROCKCHIP_FAST_SPL=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_SPL_STACK_R_ADDR=0x80000 CONFIG_DM_KEYBOARD=y CONFIG_DEFAULT_DEVICE_TREE="rk3288-jerry"
configs/cm_fx6_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL,SPL" CONFIG_BOOTDELAY=3
configs/cm_t43_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y CONFIG_SPL_MTD_SUPPORT=y
configs/da850_am18xxevm_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="DA850_AM18X_EVM,MAC_ADDR_IN_EEPROM,SYS_I2C_EEPROM_ADDR_LEN=2,SYS_I2C_EEPROM_ADDR=0x50" CONFIG_BOOTDELAY=3 CONFIG_VERSION_VARIABLE=y
configs/da850evm_defconfig +1 -0
@@ -5,6 +5,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="MAC_ADDR_IN_SPIFLASH" CONFIG_BOOTDELAY=3 CONFIG_VERSION_VARIABLE=y
configs/db-88f6720_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_TARGET_DB_88F6720=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="armada-375-db" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_BOOTDELAY=3
configs/db-88f6820-gp_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_TARGET_DB_88F6820_GP=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="armada-388-gp" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/db-mv784mp-gp_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_TARGET_DB_MV784MP_GP=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="armada-xp-gp" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_BOOTDELAY=3
configs/dra7xx_evm_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_OMAP54XX=y CONFIG_TARGET_DRA7XX_EVM=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_DEFAULT_DEVICE_TREE="dra7-evm" CONFIG_FIT=y
configs/dra7xx_hs_evm_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TI_SECURE_DEVICE=y CONFIG_TARGET_DRA7XX_EVM=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_DEFAULT_DEVICE_TREE="dra7-evm" CONFIG_FIT=y
configs/draco_defconfig +1 -0
@@ -11,6 +11,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-draco" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/ds414_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_TARGET_DS414=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="armada-xp-synology-ds414" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/etamin_defconfig +1 -0
@@ -11,6 +11,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-draco" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/k2e_evm_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="k2e-evm" CONFIG_OF_BOARD_SETUP=y CONFIG_VERSION_VARIABLE=y
configs/k2g_evm_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="k2g-evm" CONFIG_OF_BOARD_SETUP=y CONFIG_VERSION_VARIABLE=y
configs/k2hk_evm_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="k2hk-evm" CONFIG_OF_BOARD_SETUP=y CONFIG_VERSION_VARIABLE=y
configs/k2l_evm_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="k2l-evm" CONFIG_OF_BOARD_SETUP=y CONFIG_VERSION_VARIABLE=y
configs/ma5d4evk_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4" CONFIG_BOOTDELAY=3
configs/maxbcm_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_TARGET_MAXBCM=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="armada-xp-maxbcm" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/ot1200_spl_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_TARGET_OT1200=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/pcm058_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q" CONFIG_BOOTDELAY=3
configs/pxm2_defconfig +1 -0
@@ -11,6 +11,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-pxm50" CONFIG_FIT=y CONFIG_BOOTDELAY=3
configs/rastaban_defconfig +1 -0
@@ -11,6 +11,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-draco" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/rut_defconfig +1 -0
@@ -11,6 +11,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-rut" CONFIG_FIT=y CONFIG_BOOTDELAY=3
configs/sama5d2_ptc_spiflash_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2,SYS_USE_SERIALFLASH" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/sama5d2_xplained_spiflash_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2,SYS_USE_SERIALFLASH" CONFIG_BOOTDELAY=3
configs/sama5d3xek_spiflash_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_SERIALFLASH" CONFIG_BOOTDELAY=3
configs/sama5d4_xplained_spiflash_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_SERIALFLASH" CONFIG_BOOTDELAY=3
configs/sama5d4ek_spiflash_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_SERIALFLASH" CONFIG_BOOTDELAY=3
configs/taurus_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="at91sam9g20-taurus" CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2067,BOARD_TAURUS" CONFIG_BOOTDELAY=3
configs/theadorable_debug_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_TARGET_THEADORABLE=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="armada-xp-theadorable" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_FIT=y
configs/theadorable_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_TARGET_THEADORABLE=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="armada-xp-theadorable" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_FIT=y
configs/thuban_defconfig +1 -0
@@ -11,6 +11,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-draco" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/zc5202_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/zc5601_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
include/configs/P1010RDB.h +0 -1
@@ -45,7 +45,6 @@#define CONFIG_SYS_TEXT_BASE 0x11000000#define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc#else -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_MINIMAL #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
include/configs/P1022DS.h +0 -1
@@ -35,7 +35,6 @@#endif #ifdef CONFIG_SPIFLASH -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_MINIMAL #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
include/configs/T102xQDS.h +0 -1
@@ -70,7 +70,6 @@#ifdef CONFIG_SPIFLASH #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_MINIMAL #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10)#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x00200000)
include/configs/T102xRDB.h +0 -1
@@ -77,7 +77,6 @@#ifdef CONFIG_SPIFLASH #define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_MINIMAL #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10)#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x30000000)
include/configs/T104xRDB.h +0 -1
@@ -80,7 +80,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg#ifdef CONFIG_SPIFLASH #define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_MINIMAL #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10)#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x30000000)
include/configs/T208xQDS.h +0 -1
@@ -80,7 +80,6 @@#ifdef CONFIG_SPIFLASH #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_MINIMAL #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10)#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x00200000)
include/configs/T208xRDB.h +0 -1
@@ -69,7 +69,6 @@#ifdef CONFIG_SPIFLASH #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_MINIMAL #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10)#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x00200000)
include/configs/am335x_evm.h +0 -1
@@ -390,7 +390,6 @@#if defined(CONFIG_SPI_BOOT )/* SPL related */ #undef CONFIG_SPL_OS_BOOT/* Not supported by existing map */ -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
include/configs/am57xx_evm.h +0 -1
@@ -104,7 +104,6 @@#endif /* SPI SPL */ -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_TI_EDMA3 #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000
include/configs/at91sam9n12ek.h +0 -1
@@ -258,7 +258,6 @@#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER #elif CONFIG_SYS_USE_SPIFLASH -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8400
include/configs/at91sam9x5ek.h +0 -1
@@ -258,7 +258,6 @@#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER #elif CONFIG_SYS_USE_SPIFLASH -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8400
include/configs/bav335x.h +0 -1
@@ -522,7 +522,6 @@ DEFAULT_LINUX_BOOT_ENV \#if defined(CONFIG_SPI_BOOT )/* SPL related */ #undef CONFIG_SPL_OS_BOOT/* Not supported by existing map */ -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
include/configs/brppt1.h +0 -1
@@ -254,7 +254,6 @@ MMCARGS#define CONFIG_OMAP3_SPI #define CONFIG_SF_DEFAULT_SPEED 24000000 -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000#undef CONFIG_ENV_IS_NOWHERE
include/configs/cgtqmx6eval.h +0 -1
@@ -18,7 +18,6 @@#define CONFIG_MACH_TYPE 4122#ifdef CONFIG_SPL -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024)#define CONFIG_SPL_SPI_LOAD #include "imx6_spl.h"
include/configs/chromebook_jerry.h +0 -1
@@ -15,7 +15,6 @@#include <configs/rk3288_common.h> #define CONFIG_ENV_IS_NOWHERE -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SPI_FLASH_GIGADEVICE
include/configs/clearfog.h +0 -1
@@ -125,7 +125,6 @@#if CONFIG_SPL_BOOT_DEVICE ==SPL_BOOT_SPI_NOR_FLASH /* SPL related SPI defines */ -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS
include/configs/cm_fx6.h +0 -1
@@ -249,7 +249,6 @@#include "imx6_spl.h" #undef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x80/* offset 64 kb */ -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024)#define CONFIG_SPL_SPI_LOAD
include/configs/cm_t43.h +0 -1
@@ -154,7 +154,6 @@#define CONFIG_SYS_SPI_U_BOOT_OFFS (256 * 1024)#define CONFIG_SYS_MONITOR_LEN (512 * 1024)#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x480 -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD /* EEPROM */
include/configs/da850evm.h +0 -3
@@ -147,7 +147,6 @@#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED#ifdef CONFIG_USE_SPIFLASH -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000
@@ -338,7 +337,6 @@#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \ CONFIG_SYS_MALLOC_LEN)#define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SPL_LDSCRIPT "board/$(BOARDDIR)/u-boot-spl-da850evm.lds"#define CONFIG_SPL_STACK 0x8001ff00
@@ -350,7 +348,6 @@/* Load U-Boot Image From MMC */ #ifdef CONFIG_SPL_MMC_LOAD #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x75 -#undef CONFIG_SPL_SPI_SUPPORT#undef CONFIG_SPL_SPI_LOAD#endif
include/configs/db-88f6720.h +0 -1
@@ -92,7 +92,6 @@#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4)/* SPL related SPI defines */ -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS
include/configs/db-88f6820-gp.h +0 -1
@@ -126,7 +126,6 @@#if CONFIG_SPL_BOOT_DEVICE ==SPL_BOOT_SPI_NOR_FLASH /* SPL related SPI defines */ -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x24000#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS
include/configs/db-mv784mp-gp.h +0 -1
@@ -117,7 +117,6 @@#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4)/* SPL related SPI defines */ -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS
include/configs/dra7xx_evm.h +0 -1
@@ -192,7 +192,6 @@#endif /* SPI SPL */ -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_TI_EDMA3 #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000
include/configs/ds414.h +0 -1
@@ -123,7 +123,6 @@#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4)/* SPL related SPI defines */ -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x24000
include/configs/el6x_common.h +0 -1
@@ -25,7 +25,6 @@#define CONFIG_MXC_UART #ifdef CONFIG_SPL -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024)#define CONFIG_SPL_SPI_LOAD #include "imx6_spl.h"
include/configs/ma5d4evk.h +0 -1
@@ -219,7 +219,6 @@#define CONFIG_SPL_BOARD_INIT #define CONFIG_SYS_MONITOR_LEN (512 << 10) -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x10000
include/configs/maxbcm.h +0 -1
@@ -85,7 +85,6 @@#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4)/* SPL related SPI defines */ -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
include/configs/omapl138_lcdk.h +0 -1
@@ -97,7 +97,6 @@#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED#ifdef CONFIG_USE_SPIFLASH -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x30000
include/configs/ot1200.h +0 -1
@@ -80,7 +80,6 @@/* SPL */ #ifdef CONFIG_SPL #include "imx6_spl.h" -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024)#define CONFIG_SPL_SPI_LOAD #endif
include/configs/p1_p2_rdb_pc.h +0 -1
@@ -202,7 +202,6 @@#endif #ifdef CONFIG_SPIFLASH -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_MINIMAL #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
include/configs/pcm051.h +0 -1
@@ -124,7 +124,6 @@#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"#ifdef CONFIG_SPI_BOOT -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000
include/configs/pcm058.h +0 -1
@@ -12,7 +12,6 @@#ifdef CONFIG_SPL #define CONFIG_SPL_YMODEM_SUPPORT -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024)#include "imx6_spl.h"
include/configs/sama5d2_ptc.h +0 -1
@@ -125,7 +125,6 @@#define CONFIG_SYS_MONITOR_LEN (512 << 10)#ifdef CONFIG_SYS_USE_SERIALFLASH -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000
include/configs/sama5d2_xplained.h +0 -1
@@ -136,7 +136,6 @@#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"#elif CONFIG_SYS_USE_SERIALFLASH -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000
include/configs/sama5d3xek.h +0 -1
@@ -187,7 +187,6 @@#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER #elif CONFIG_SYS_USE_SERIALFLASH -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000
include/configs/sama5d4_xplained.h +0 -1
@@ -149,7 +149,6 @@#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER #elif CONFIG_SYS_USE_SERIALFLASH -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000
include/configs/sama5d4ek.h +0 -1
@@ -147,7 +147,6 @@#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER #elif CONFIG_SYS_USE_SERIALFLASH -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000
include/configs/siemens-am33x-common.h +0 -1
@@ -139,7 +139,6 @@#define CONFIG_SPL_WATCHDOG_SUPPORT -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
include/configs/socfpga_common.h +0 -3
@@ -323,9 +323,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void);#define CONFIG_SPL_MAX_SIZE (64 * 1024)#define CONFIG_SPL_WATCHDOG_SUPPORT -#ifdef CONFIG_DM_SPI -#define CONFIG_SPL_SPI_SUPPORT -#endif /* SPL SDMMC boot support */ #ifdef CONFIG_SPL_MMC_SUPPORT
include/configs/taurus.h +0 -1
@@ -143,7 +143,6 @@#if defined(CONFIG_SPL_BUILD )/* SPL related */ #undef CONFIG_SPL_OS_BOOT/* Not supported by existing map */ -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
include/configs/theadorable.h +0 -1
@@ -150,7 +150,6 @@#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4)/* SPL related SPI defines */ -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x1a000#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS
include/configs/ti_armv7_keystone2.h +0 -1
@@ -54,7 +54,6 @@ CONFIG_SYS_SPL_MALLOC_SIZE + \ SPL_MALLOC_F_SIZE + \ CONFIG_SPL_STACK_SIZE - 4) -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS CONFIG_SPL_PAD_TO
include/configs/tqma6.h +0 -3
@@ -12,9 +12,6 @@#include <linux/kconfig.h> /* SPL */ /* #if defined(CONFIG_SPL_BUILD) */ - -#define CONFIG_SPL_SPI_SUPPORT -/* common IMX6 SPL configuration */ #include "imx6_spl.h"
include/configs/zynq-common.h +0 -1
@@ -325,7 +325,6 @@/* qspi mode is working fine */ #ifdef CONFIG_ZYNQ_QSPI -#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x100000#define CONFIG_SYS_SPI_ARGS_OFFS 0x200000
Signature · 1 line
2.8.0.rc3.226.g39d4020
PATCH v3 40/45 Convert CONFIG_SPL_SPI_SUPPORT to Kconfig
Quoted 3 lines · Simon Glass
Move this option to
Kconfigand tidy up existing uses.Signed-off-by Simon Glass <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160918/9b5d2bfa/attachment.sig>
PATCH v3 41/45 Convert CONFIG_SPL_USBETH_SUPPORT to Kconfig
In reply to Simon GlassMove this option to Kconfig and tidy up existing uses.
Signed-off-by Simon Glass <[email protected]>
---
Changes in v3: None
Changes in v2: None
configs/am335x_evm_usbspl_defconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
configs/am335x_evm_usbspl_defconfig +2 -1
@@ -2,13 +2,14 @@ CONFIG_ARM=y CONFIG_TARGET_AM335X_EVM=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_FIT=y -CONFIG_SYS_EXTRA_OPTIONS="NAND,SPL_USBETH_SUPPORT" +CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y CONFIG_SPL_STACK_R=y CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_MUSB_NEW_SUPPORT=y CONFIG_SPL_NET_SUPPORT=y +CONFIG_SPL_USBETH_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set
Signature · 1 line
2.8.0.rc3.226.g39d4020
PATCH v3 41/45 Convert CONFIG_SPL_USBETH_SUPPORT to Kconfig
Quoted 3 lines · Simon Glass
Move this option to
Kconfigand tidy up existing uses.Signed-off-by Simon Glass <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160918/6bb122bd/attachment.sig>
PATCH v3 42/45 Convert CONFIG_SPL_USB_HOST_SUPPORT to Kconfig
In reply to Simon GlassMove this option to Kconfig and tidy up existing uses.
Signed-off-by Simon Glass <[email protected]>
---
Changes in v3: None
Changes in v2: None
configs/am43xx_evm_usbhost_boot_defconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
configs/am43xx_evm_usbhost_boot_defconfig +2 -1
@@ -5,12 +5,13 @@ CONFIG_ISW_ENTRY_ADDR=0x40300350 CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_DEFAULT_DEVICE_TREE="am437x-gp-evm" CONFIG_FIT=y -CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND,SPL_USB_HOST_SUPPORT" +CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND" CONFIG_SPL_LOAD_FIT=y CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y CONFIG_SPL_STACK_R=y CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SPL_USB_HOST_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set
Signature · 1 line
2.8.0.rc3.226.g39d4020
PATCH v3 42/45 Convert CONFIG_SPL_USB_HOST_SUPPORT to Kconfig
Quoted 3 lines · Simon Glass
Move this option to
Kconfigand tidy up existing uses.Signed-off-by Simon Glass <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160918/8e0e70e3/attachment.sig>
PATCH v3 43/45 Convert CONFIG_SPL_USB_SUPPORT to Kconfig
In reply to Simon GlassMove this option to Kconfig and tidy up existing uses.
Signed-off-by Simon Glass <[email protected]>
---
Changes in v3: None
Changes in v2: None
configs/am43xx_evm_usbhost_boot_defconfig | 1 + include/configs/am43xx_evm.h | 3 --- 2 files changed, 1 insertion(+), 3 deletions(-)
configs/am43xx_evm_usbhost_boot_defconfig +1 -0
@@ -12,6 +12,7 @@ CONFIG_SPL=y CONFIG_SPL_STACK_R=y CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_USB_HOST_SUPPORT=y +CONFIG_SPL_USB_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set
include/configs/am43xx_evm.h +0 -3
@@ -86,9 +86,6 @@#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"/* SPL USB Support */ -#ifdef CONFIG_SPL_USB_HOST_SUPPORT -#define CONFIG_SPL_USB_SUPPORT -#endif #if defined(CONFIG_SPL_USB_HOST_SUPPORT ) || !defined(CONFIG_SPL_BUILD )#define CONFIG_SYS_USB_FAT_BOOT_PARTITION 1
Signature · 1 line
2.8.0.rc3.226.g39d4020
PATCH v3 43/45 Convert CONFIG_SPL_USB_SUPPORT to Kconfig
Quoted 3 lines · Simon Glass
Move this option to
Kconfigand tidy up existing uses.Signed-off-by Simon Glass <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160918/f198014b/attachment.sig>
PATCH v3 44/45 Convert CONFIG_SPL_WATCHDOG_SUPPORT to Kconfig
In reply to Simon GlassMove this option to Kconfig and tidy up existing uses.
Signed-off-by Simon Glass <[email protected]>
---
Changes in v3: None
Changes in v2: None
arch/arm/mach-socfpga/Kconfig | 3 +++ board/ti/am335x/Kconfig | 3 +++ configs/am335x_baltos_defconfig | 1 + configs/am335x_igep0033_defconfig | 1 + configs/am335x_shc_defconfig | 1 + configs/am335x_shc_ict_defconfig | 1 + configs/am335x_shc_netboot_defconfig | 1 + configs/am335x_shc_prompt_defconfig | 1 + configs/am335x_shc_sdboot_defconfig | 1 + configs/am335x_shc_sdboot_prompt_defconfig | 1 + configs/am335x_sl50_defconfig | 1 + configs/birdland_bav335a_defconfig | 1 + configs/birdland_bav335b_defconfig | 1 + configs/brppt1_mmc_defconfig | 1 + configs/brppt1_nand_defconfig | 1 + configs/brppt1_spi_defconfig | 1 + configs/cgtqmx6eval_defconfig | 1 + configs/cm_fx6_defconfig | 1 + configs/cm_t335_defconfig | 1 + configs/draco_defconfig | 1 + configs/etamin_defconfig | 1 + configs/gwventana_defconfig | 1 + configs/ls1021aqds_nand_defconfig | 1 + configs/ls1021aqds_sdcard_ifc_defconfig | 1 + configs/ls1021aqds_sdcard_qspi_defconfig | 1 + configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig | 1 + configs/ls1021atwr_sdcard_ifc_defconfig | 1 + configs/ls1021atwr_sdcard_qspi_defconfig | 1 + configs/ls1043aqds_nand_defconfig | 1 + configs/ls1043aqds_sdcard_ifc_defconfig | 1 + configs/ls1043aqds_sdcard_qspi_defconfig | 1 + configs/ls1043ardb_nand_defconfig | 1 + configs/ls1043ardb_sdcard_defconfig | 1 + configs/mx6cuboxi_defconfig | 1 + configs/mx6sabresd_spl_defconfig | 1 + configs/mx6slevk_spl_defconfig | 1 + configs/mx6sxsabresd_spl_defconfig | 1 + configs/mx6ul_14x14_evk_defconfig | 1 + configs/mx6ul_9x9_evk_defconfig | 1 + configs/novena_defconfig | 1 + configs/ot1200_spl_defconfig | 1 + configs/pcm051_rev1_defconfig | 1 + configs/pcm051_rev3_defconfig | 1 + configs/pcm058_defconfig | 1 + configs/pengwyn_defconfig | 1 + configs/pepper_defconfig | 1 + configs/picosam9g45_defconfig | 1 + configs/platinum_picon_defconfig | 1 + configs/platinum_titanium_defconfig | 1 + configs/pxm2_defconfig | 1 + configs/rastaban_defconfig | 1 + configs/rut_defconfig | 1 + configs/thuban_defconfig | 1 + configs/udoo_defconfig | 1 + configs/wandboard_defconfig | 1 + configs/xpress_spl_defconfig | 1 + configs/zc5202_defconfig | 1 + configs/zc5601_defconfig | 1 + include/configs/brppt1.h | 1 - include/configs/imx6_spl.h | 1 - include/configs/ls1021aqds.h | 2 -- include/configs/ls1021atwr.h | 1 - include/configs/ls1043a_common.h | 2 -- include/configs/picosam9g45.h | 2 -- include/configs/siemens-am33x-common.h | 2 -- include/configs/socfpga_common.h | 2 -- include/configs/ti_am335x_common.h | 1 - 67 files changed, 62 insertions(+), 14 deletions(-)
arch/arm/mach-socfpga/Kconfig +3 -0
@@ -24,6 +24,9 @@ config SPL_SPI_FLASH_SUPPORT config SPL_SPI_SUPPORT default y if DM_SPI +config SPL_WATCHDOG_SUPPORT + default y + config TARGET_SOCFPGA_ARRIA5 bool select TARGET_SOCFPGA_GEN5
board/ti/am335x/Kconfig +3 -0
@@ -3,6 +3,9 @@ if TARGET_AM335X_EVM config SPL_ENV_SUPPORT default y +config SPL_WATCHDOG_SUPPORT + default y + config SYS_BOARD default "am335x"
configs/am335x_baltos_defconfig +1 -0
@@ -11,6 +11,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_FIT=y CONFIG_FIT_VERBOSE=y
configs/am335x_igep0033_defconfig +1 -0
@@ -11,6 +11,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y
configs/am335x_shc_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SERIES=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_FIT=y
configs/am335x_shc_ict_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SHC_ICT=y CONFIG_SERIES=y CONFIG_SPL_STACK_R_ADDR=0x82000000
configs/am335x_shc_netboot_defconfig +1 -0
@@ -11,6 +11,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SHC_NETBOOT=y CONFIG_SERIES=y CONFIG_SPL_STACK_R_ADDR=0x82000000
configs/am335x_shc_prompt_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SERIES=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_FIT=y
configs/am335x_shc_sdboot_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SHC_SDBOOT=y CONFIG_SERIES=y CONFIG_SPL_STACK_R_ADDR=0x82000000
configs/am335x_shc_sdboot_prompt_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SHC_SDBOOT=y CONFIG_SERIES=y CONFIG_SPL_STACK_R_ADDR=0x82000000
configs/am335x_sl50_defconfig +1 -0
@@ -11,6 +11,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="EMMC_BOOT"
configs/birdland_bav335a_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_BAV_VERSION=1 CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1"
configs/birdland_bav335b_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_BAV_VERSION=2 CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1"
configs/brppt1_mmc_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,EMMC_BOOT" CONFIG_BOOTDELAY=-2
configs/brppt1_nand_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND" CONFIG_BOOTDELAY=-2
configs/brppt1_spi_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,SPI_BOOT,EMMC_BOOT" CONFIG_SPI_BOOT=y
configs/cgtqmx6eval_defconfig +1 -0
@@ -11,6 +11,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,SPL,MX6QDL" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/cm_fx6_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL,SPL" CONFIG_BOOTDELAY=3
configs/cm_t335_defconfig +1 -0
@@ -11,6 +11,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y CONFIG_SPL_MTD_SUPPORT=y
configs/draco_defconfig +1 -0
@@ -12,6 +12,7 @@ CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-draco" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/etamin_defconfig +1 -0
@@ -12,6 +12,7 @@ CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-draco" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/gwventana_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SPL_STACK_R_ADDR=0x18000000 CONFIG_DM_SERIAL=y CONFIG_FIT=y
configs/ls1021aqds_nand_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y
configs/ls1021aqds_sdcard_ifc_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart" CONFIG_FIT=y CONFIG_FIT_VERBOSE=y
configs/ls1021aqds_sdcard_qspi_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart" CONFIG_FIT=y CONFIG_FIT_VERBOSE=y
configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y
configs/ls1021atwr_sdcard_ifc_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y
configs/ls1021atwr_sdcard_qspi_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="ls1021a-twr-duart" CONFIG_FIT=y CONFIG_FIT_VERBOSE=y
configs/ls1043aqds_nand_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart" CONFIG_FIT=y CONFIG_FIT_VERBOSE=y
configs/ls1043aqds_sdcard_ifc_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart" CONFIG_FIT=y CONFIG_FIT_VERBOSE=y
configs/ls1043aqds_sdcard_qspi_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart" CONFIG_FIT=y CONFIG_FIT_VERBOSE=y
configs/ls1043ardb_nand_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb" CONFIG_FIT=y CONFIG_FIT_VERBOSE=y
configs/ls1043ardb_sdcard_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb" CONFIG_FIT=y CONFIG_FIT_VERBOSE=y
configs/mx6cuboxi_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL" CONFIG_SPL=y CONFIG_HUSH_PARSER=y
configs/mx6sabresd_spl_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,SPL,MX6Q" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/mx6slevk_spl_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,SPL,MX6SL" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/mx6sxsabresd_spl_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/mx6ul_14x14_evk_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/mx6ul_9x9_evk_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/novena_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q" CONFIG_VERSION_VARIABLE=y
configs/ot1200_spl_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/pcm051_rev1_defconfig +1 -0
@@ -11,6 +11,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="REV1" CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y
configs/pcm051_rev3_defconfig +1 -0
@@ -11,6 +11,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="REV3" CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y
configs/pcm058_defconfig +1 -0
@@ -11,6 +11,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q" CONFIG_BOOTDELAY=3
configs/pengwyn_defconfig +1 -0
@@ -12,6 +12,7 @@ CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y CONFIG_SPL_ETH_SUPPORT=y
configs/pepper_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SPL=y CONFIG_VERSION_VARIABLE=y CONFIG_HUSH_PARSER=y
configs/picosam9g45_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_SPL_FAT_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,SYS_USE_MMC" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/platinum_picon_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6DL" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/platinum_titanium_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/pxm2_defconfig +1 -0
@@ -12,6 +12,7 @@ CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-pxm50" CONFIG_FIT=y CONFIG_BOOTDELAY=3
configs/rastaban_defconfig +1 -0
@@ -12,6 +12,7 @@ CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-draco" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/rut_defconfig +1 -0
@@ -12,6 +12,7 @@ CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-rut" CONFIG_FIT=y CONFIG_BOOTDELAY=3
configs/thuban_defconfig +1 -0
@@ -12,6 +12,7 @@ CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-draco" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/udoo_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/wandboard_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL" CONFIG_SPL=y CONFIG_HUSH_PARSER=y
configs/xpress_spl_defconfig +1 -0
@@ -9,6 +9,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/zc5202_defconfig +1 -0
@@ -11,6 +11,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/zc5601_defconfig +1 -0
@@ -11,6 +11,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
include/configs/brppt1.h +0 -1
@@ -24,7 +24,6 @@#define CONFIG_HW_WATCHDOG #define CONFIG_OMAP_WATCHDOG -#define CONFIG_SPL_WATCHDOG_SUPPORT /* Bootcount using the RTC block */ #define CONFIG_SYS_BOOTCOUNT_ADDR 0x44E3E000
include/configs/imx6_spl.h +0 -1
@@ -29,7 +29,6 @@#define CONFIG_SPL_TEXT_BASE 0x00908000#define CONFIG_SPL_MAX_SIZE 0x10000#define CONFIG_SPL_STACK 0x0091FFB8 -#define CONFIG_SPL_WATCHDOG_SUPPORT /* NAND support */ #if defined(CONFIG_SPL_NAND_SUPPORT )
include/configs/ls1021aqds.h +0 -2
@@ -67,7 +67,6 @@ unsigned long get_board_ddr_clk(void);#endif #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" -#define CONFIG_SPL_WATCHDOG_SUPPORT #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x600
@@ -97,7 +96,6 @@ unsigned long get_board_ddr_clk(void);#define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" -#define CONFIG_SPL_WATCHDOG_SUPPORT #define CONFIG_SPL_TEXT_BASE 0x10000000#define CONFIG_SPL_MAX_SIZE 0x1a000
include/configs/ls1021atwr.h +0 -1
@@ -112,7 +112,6 @@#endif #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" -#define CONFIG_SPL_WATCHDOG_SUPPORT #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8#ifdef CONFIG_SECURE_BOOT
include/configs/ls1043a_common.h +0 -2
@@ -60,7 +60,6 @@#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_WATCHDOG_SUPPORT #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xf0#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x500
@@ -83,7 +82,6 @@#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_WATCHDOG_SUPPORT #define CONFIG_SPL_TEXT_BASE 0x10000000#define CONFIG_SPL_MAX_SIZE 0x1a000#define CONFIG_SPL_STACK 0x1001d000
include/configs/picosam9g45.h +0 -2
@@ -163,8 +163,6 @@#define CONFIG_SPL_MAX_SIZE 0x010000#define CONFIG_SPL_STACK 0x310000 -#define CONFIG_SPL_WATCHDOG_SUPPORT -#define CONFIG_SYS_MONITOR_LEN 0x80000#ifdef CONFIG_SYS_USE_MMC
include/configs/siemens-am33x-common.h +0 -2
@@ -137,8 +137,6 @@#define CONFIG_SPL_YMODEM_SUPPORT -#define CONFIG_SPL_WATCHDOG_SUPPORT -#define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
include/configs/socfpga_common.h +0 -2
@@ -322,8 +322,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void);#define CONFIG_SPL_TEXT_BASE CONFIG_SYS_INIT_RAM_ADDR#define CONFIG_SPL_MAX_SIZE (64 * 1024) -#define CONFIG_SPL_WATCHDOG_SUPPORT -/* SPL SDMMC boot support */ #ifdef CONFIG_SPL_MMC_SUPPORT #if defined(CONFIG_SPL_FAT_SUPPORT ) || defined(CONFIG_SPL_EXT_SUPPORT )
include/configs/ti_am335x_common.h +0 -1
@@ -62,7 +62,6 @@ (128 << 20))/* Enable the watchdog inside of SPL */ -#define CONFIG_SPL_WATCHDOG_SUPPORT /* * Since SPL did pll and ddr initialization for us,
Signature · 1 line
2.8.0.rc3.226.g39d4020
PATCH v3 44/45 Convert CONFIG_SPL_WATCHDOG_SUPPORT to Kconfig
Quoted 3 lines · Simon Glass
Move this option to
Kconfigand tidy up existing uses.Signed-off-by Simon Glass <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160918/5df6ebae/attachment.sig>
PATCH v3 45/45 Convert CONFIG_SPL_YMODEM_SUPPORT to Kconfig
In reply to Simon GlassConvert CONFIG_SPL_YMODEM_SUPPORT to Kconfig
Move this option to Kconfig and tidy up existing uses.
Signed-off-by Simon Glass <[email protected]>
---
Changes in v3:
- Rebase on master
Changes in v2:
- Lots of work to make use of common values across multiple boards
- Added a patch to change 'spear' CONFIGs to upper case
board/ti/am335x/Kconfig | 3 +++ configs/am335x_baltos_defconfig | 1 + configs/am335x_igep0033_defconfig | 1 + configs/am335x_shc_defconfig | 1 + configs/am335x_shc_ict_defconfig | 1 + configs/am335x_shc_netboot_defconfig | 1 + configs/am335x_shc_prompt_defconfig | 1 + configs/am335x_shc_sdboot_defconfig | 1 + configs/am335x_shc_sdboot_prompt_defconfig | 1 + configs/am335x_sl50_defconfig | 1 + configs/am43xx_evm_defconfig | 1 + configs/am43xx_evm_ethboot_defconfig | 1 + configs/am43xx_evm_usbhost_boot_defconfig | 1 + configs/am43xx_hs_evm_defconfig | 1 + configs/birdland_bav335a_defconfig | 1 + configs/birdland_bav335b_defconfig | 1 + configs/brppt1_mmc_defconfig | 1 + configs/brppt1_nand_defconfig | 1 + configs/brppt1_spi_defconfig | 1 + configs/brxre1_defconfig | 1 + configs/draco_defconfig | 1 + configs/etamin_defconfig | 1 + configs/pcm051_rev1_defconfig | 1 + configs/pcm051_rev3_defconfig | 1 + configs/pcm058_defconfig | 1 + configs/pengwyn_defconfig | 1 + configs/pxm2_defconfig | 1 + configs/rastaban_defconfig | 1 + configs/rut_defconfig | 1 + configs/thuban_defconfig | 1 + configs/ti814x_evm_defconfig | 1 + configs/ti816x_evm_defconfig | 1 + include/configs/am335x_evm.h | 3 --- include/configs/am335x_igep0033.h | 1 - include/configs/am335x_shc.h | 1 - include/configs/am335x_sl50.h | 2 -- include/configs/am43xx_evm.h | 1 - include/configs/baltos.h | 2 -- include/configs/bav335x.h | 2 -- include/configs/bur_am335x_common.h | 1 - include/configs/pcm051.h | 1 - include/configs/pcm058.h | 1 - include/configs/pengwyn.h | 1 - include/configs/siemens-am33x-common.h | 2 -- include/configs/ti814x_evm.h | 1 - include/configs/ti816x_evm.h | 1 - 46 files changed, 34 insertions(+), 20 deletions(-)
board/ti/am335x/Kconfig +3 -0
@@ -6,6 +6,9 @@ config SPL_ENV_SUPPORT config SPL_WATCHDOG_SUPPORT default y +config SPL_YMODEM_SUPPORT + default y + config SYS_BOARD default "am335x"
configs/am335x_baltos_defconfig +1 -0
@@ -13,6 +13,7 @@ CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SPL_STACK_R_ADDR=0x82000000 +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y
configs/am335x_igep0033_defconfig +1 -0
@@ -13,6 +13,7 @@ CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SPL_STACK_R_ADDR=0x82000000 +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y CONFIG_SPL_STACK_R=y
configs/am335x_shc_defconfig +1 -0
@@ -13,6 +13,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SERIES=y CONFIG_SPL_STACK_R_ADDR=0x82000000 +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_FIT=y CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y
configs/am335x_shc_ict_defconfig +1 -0
@@ -14,6 +14,7 @@ CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SHC_ICT=y CONFIG_SERIES=y CONFIG_SPL_STACK_R_ADDR=0x82000000 +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_FIT=y CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y
configs/am335x_shc_netboot_defconfig +1 -0
@@ -15,6 +15,7 @@ CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SHC_NETBOOT=y CONFIG_SERIES=y CONFIG_SPL_STACK_R_ADDR=0x82000000 +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_FIT=y CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y
configs/am335x_shc_prompt_defconfig +1 -0
@@ -13,6 +13,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SERIES=y CONFIG_SPL_STACK_R_ADDR=0x82000000 +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_FIT=y CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y
configs/am335x_shc_sdboot_defconfig +1 -0
@@ -14,6 +14,7 @@ CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SHC_SDBOOT=y CONFIG_SERIES=y CONFIG_SPL_STACK_R_ADDR=0x82000000 +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_FIT=y CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y
configs/am335x_shc_sdboot_prompt_defconfig +1 -0
@@ -14,6 +14,7 @@ CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SHC_SDBOOT=y CONFIG_SERIES=y CONFIG_SPL_STACK_R_ADDR=0x82000000 +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_FIT=y CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y
configs/am335x_sl50_defconfig +1 -0
@@ -13,6 +13,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SPL_STACK_R_ADDR=0x82000000 +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="EMMC_BOOT" CONFIG_VERSION_VARIABLE=y
configs/am43xx_evm_defconfig +1 -0
@@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_AM43XX=y CONFIG_TARGET_AM43XX_EVM=y CONFIG_SPL_STACK_R_ADDR=0x82000000 +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am437x-gp-evm" CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1,NAND"
configs/am43xx_evm_ethboot_defconfig +1 -0
@@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_AM43XX=y CONFIG_TARGET_AM43XX_EVM=y +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND" CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y
configs/am43xx_evm_usbhost_boot_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_AM43XX=y CONFIG_TARGET_AM43XX_EVM=y CONFIG_ISW_ENTRY_ADDR=0x40300350 CONFIG_SPL_STACK_R_ADDR=0x82000000 +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am437x-gp-evm" CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND"
configs/am43xx_hs_evm_defconfig +1 -0
@@ -4,6 +4,7 @@ CONFIG_TI_SECURE_DEVICE=y CONFIG_TARGET_AM43XX_EVM=y CONFIG_ISW_ENTRY_ADDR=0x40302ae0 CONFIG_SPL_STACK_R_ADDR=0x82000000 +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am437x-gp-evm" CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1, NAND"
configs/birdland_bav335a_defconfig +1 -0
@@ -11,6 +11,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_BAV_VERSION=1 CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1"
configs/birdland_bav335b_defconfig +1 -0
@@ -11,6 +11,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_BAV_VERSION=2 CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1"
configs/brppt1_mmc_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,EMMC_BOOT" CONFIG_BOOTDELAY=-2
configs/brppt1_nand_defconfig +1 -0
@@ -8,6 +8,7 @@ CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND" CONFIG_BOOTDELAY=-2
configs/brppt1_spi_defconfig +1 -0
@@ -10,6 +10,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,SPI_BOOT,EMMC_BOOT" CONFIG_SPI_BOOT=y
configs/brxre1_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1" CONFIG_BOOTDELAY=-2 CONFIG_VERSION_VARIABLE=y
configs/draco_defconfig +1 -0
@@ -13,6 +13,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-draco" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/etamin_defconfig +1 -0
@@ -13,6 +13,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-draco" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/pcm051_rev1_defconfig +1 -0
@@ -12,6 +12,7 @@ CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="REV1" CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y
configs/pcm051_rev3_defconfig +1 -0
@@ -12,6 +12,7 @@ CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_SYS_EXTRA_OPTIONS="REV3" CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y
configs/pcm058_defconfig +1 -0
@@ -12,6 +12,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_FIT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q" CONFIG_BOOTDELAY=3
configs/pengwyn_defconfig +1 -0
@@ -13,6 +13,7 @@ CONFIG_SPL_POWER_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y CONFIG_SPL_ETH_SUPPORT=y
configs/pxm2_defconfig +1 -0
@@ -13,6 +13,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-pxm50" CONFIG_FIT=y CONFIG_BOOTDELAY=3
configs/rastaban_defconfig +1 -0
@@ -13,6 +13,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-draco" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/rut_defconfig +1 -0
@@ -13,6 +13,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-rut" CONFIG_FIT=y CONFIG_BOOTDELAY=3
configs/thuban_defconfig +1 -0
@@ -13,6 +13,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y CONFIG_SPL_WATCHDOG_SUPPORT=y +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="am335x-draco" CONFIG_BOOTDELAY=3 CONFIG_SPL=y
configs/ti814x_evm_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_FAT_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_BOOTDELAY=1 CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y
configs/ti816x_evm_defconfig +1 -0
@@ -7,6 +7,7 @@ CONFIG_SPL_FAT_SUPPORT=y CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_BOOTDELAY=3 CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y
include/configs/am335x_evm.h +0 -3
@@ -206,8 +206,6 @@/* SPL */ #ifndef CONFIG_NOR_BOOT -#define CONFIG_SPL_YMODEM_SUPPORT -/* Bootcount using the RTC block */ #define CONFIG_BOOTCOUNT_LIMIT #define CONFIG_BOOTCOUNT_AM33XX
@@ -324,7 +322,6 @@#if defined(CONFIG_SPL_BUILD ) && defined(CONFIG_SPL_USBETH_SUPPORT )/* Remove other SPL modes. */ -#undef CONFIG_SPL_YMODEM_SUPPORT#define CONFIG_ENV_IS_NOWHERE #undef CONFIG_ENV_IS_IN_NAND/* disable host part of MUSB in SPL */
include/configs/am335x_igep0033.h +0 -1
@@ -124,7 +124,6 @@/* SPL */ #undef CONFIG_SPL_OS_BOOT/* Not supported by existing map */ -#define CONFIG_SPL_YMODEM_SUPPORT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"#define CONFIG_SYS_NAND_5_ADDR_CYCLE
include/configs/am335x_shc.h +0 -1
@@ -279,7 +279,6 @@#define CONFIG_POWER_TPS65217 /* SPL */ -#define CONFIG_SPL_YMODEM_SUPPORT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"
include/configs/am335x_sl50.h +0 -2
@@ -80,7 +80,6 @@#define CONFIG_POWER_TPS65910 /* SPL */ -#define CONFIG_SPL_YMODEM_SUPPORT /* Bootcount using the RTC block */ #define CONFIG_BOOTCOUNT_LIMIT
@@ -97,7 +96,6 @@#if defined(CONFIG_SPL_BUILD ) && defined(CONFIG_SPL_USBETH_SUPPORT )/* Remove other SPL modes. */ -#undef CONFIG_SPL_YMODEM_SUPPORT#define CONFIG_ENV_IS_NOWHERE #undef CONFIG_ENV_IS_IN_NAND/* disable host part of MUSB in SPL */
include/configs/am43xx_evm.h +0 -1
@@ -39,7 +39,6 @@#define CONFIG_SPL_TEXT_BASE CONFIG_ISW_ENTRY_ADDR#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ (128 << 20)) -#define CONFIG_SPL_YMODEM_SUPPORT /* Enabling L2 Cache */ #define CONFIG_SYS_L2_PL310
include/configs/baltos.h +0 -2
@@ -217,8 +217,6 @@/* SPL */ #ifndef CONFIG_NOR_BOOT -#define CONFIG_SPL_YMODEM_SUPPORT -/* Bootcount using the RTC block */ #define CONFIG_BOOTCOUNT_LIMIT #define CONFIG_BOOTCOUNT_AM33XX
include/configs/bav335x.h +0 -2
@@ -350,8 +350,6 @@ DEFAULT_LINUX_BOOT_ENV \/* SPL */ #ifndef CONFIG_NOR_BOOT -#define CONFIG_SPL_YMODEM_SUPPORT -/* Bootcount using the RTC block */ #define CONFIG_BOOTCOUNT_LIMIT #define CONFIG_BOOTCOUNT_AM33XX
include/configs/bur_am335x_common.h +0 -1
@@ -113,7 +113,6 @@/* General parts of the framework, required. */ #define CONFIG_SPL_BOARD_INIT -#define CONFIG_SPL_YMODEM_SUPPORT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"#endif /* ! __BUR_AM335X_COMMON_H__ */
include/configs/pcm051.h +0 -1
@@ -120,7 +120,6 @@/* CPU */ #define CONFIG_ENV_IS_NOWHERE -#define CONFIG_SPL_YMODEM_SUPPORT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"#ifdef CONFIG_SPI_BOOT
include/configs/pcm058.h +0 -1
@@ -11,7 +11,6 @@#include <config_distro_defaults.h> #ifdef CONFIG_SPL -#define CONFIG_SPL_YMODEM_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024)#include "imx6_spl.h"
include/configs/pengwyn.h +0 -1
@@ -114,7 +114,6 @@#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2/* SPL */ -#define CONFIG_SPL_YMODEM_SUPPORT /* NAND support */ #define CONFIG_CMD_NAND
include/configs/siemens-am33x-common.h +0 -2
@@ -135,8 +135,6 @@#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"#define CONFIG_FS_FAT -#define CONFIG_SPL_YMODEM_SUPPORT -#define CONFIG_SPL_SPI_LOAD #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
include/configs/ti814x_evm.h +0 -1
@@ -167,7 +167,6 @@#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#define CONFIG_SPL_YMODEM_SUPPORT #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
include/configs/ti816x_evm.h +0 -1
@@ -133,7 +133,6 @@#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#define CONFIG_SPL_YMODEM_SUPPORT #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
Signature · 1 line
2.8.0.rc3.226.g39d4020
PATCH v3 45/45 Convert CONFIG_SPL_YMODEM_SUPPORT to Kconfig
Quoted 5 lines · Simon Glass
Convert
CONFIG_SPL_YMODEM_SUPPORTtoKconfigMove this option to
Kconfigand tidy up existing uses.Signed-off-by Simon Glass <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160918/da0f57ca/attachment.sig>
v3 cover Kconfig: Move CONFIG_SPL_..._SUPPORT to Kconfig
In reply to Simon GlassHello Simon,
Am 13.09.2016 um 07:18 schrieb Simon Glass:
Quoted 102 lines
This series moves all the CONFIG_SPL_..._SUPPORT options to
Kconfigand fixes up existing boards to continue to build.It also adds a few small but useful features to moveconfig.
There is existing work going on in this area, so some of these patches may be superseded. It has taken me a while to get this building cleanly. But I have run out of time so want to get this out.
As mentioned on a recent thread [1] there is some confusion about whether an option means enabling driver support or media support. Andrew's recent series seems like a good vehicle to tidy that up. But I hope this series will make it easier.
NOTE: in the v2 series I have tried to use common things in
Kconfigto reduce the diffs in the defconfig files. This has helped a fair bit. But it is very error-prone and time consuming. Also I have had to add some exceptions (disabling an option in specific board configs). Overall it was not a pleasant experience :-(There are a few strange features of this conversion. The main difficulty is that some PowerPC boards do things like this in their board config file:
This means that TPL reuses the SPL options. We can't support this in
Kconfigso I have added a small number ofCONFIG_TPL_xxx_SUPPORToptions to cope with this. This made the conversion more painful than it should have been.A related issue is boards using a common header file and setting options only for SPL:
This is not noticed by moveconfig so we have to clean it up manually. Also there are a few incorrect things where
Kconfigoptions are set with #define:Finally, many defconfig files are not ordered correctly, resulting in larger patches than we might like. It would be great to have a solution for this, perhaps with buildman providing a warning. But it might slow down development.
The series is fully build-tested (for bisectability) and causes no failures for the boards that already pass. The following boards fail for me at present on mainline (which I have not yet looked at):
01: buildman
blackfin: + cm-bf527 bf609-ezkit bf537-stamp sparc: + grsim grsim_leon2 gr_cpci_ax2000 gr_xc3s_1500 gr_ep2s60 nios2: + 10m50 3c120microblaze: + microblaze-generic
openrisc: + openrisc-generic[1] https://patchwork.ozlabs.org/patch/661511/
Changes in v3:
- MoveSPL_NET_VCI_STRINGinto the SPLKconfigfile also
- Rebase on masterChanges in v2:
- Add some notes on this option tomoveconfig.py
- Improve the commit message and add one for resyncing with savedefconfig
- Add some notes on this option tomoveconfig.py
- Add new patch to convertCONFIG_SPL_NET_VCI_STRING
- DropCONFIG_SPL_PINCTRL_SUPPORT
- Lots of work to make use of common values across multiple boards
- Added a patch to change 'spear' CONFIGs to upper caseSimon Glass (45):
Correct defconfigs using savedefconfig
moveconfig: Add an option to skip prompts
moveconfig: Add an option to commit changes
Kconfig: Move SPL settings into their own file
arm: fsl: Adjust ordering of #ifndefCONFIG_SPL_BUILDDropCONFIG_SPL_RAM_SUPPORT
Use separate options for TPL support
Kconfig: spl: Add SPL support options toKconfig
Kconfig: tpl: Add some TPL support options toKconfigMove existing use ofCONFIG_SPL_DMtoKconfigMove existing use ofCONFIG_SPL_RSAtoKconfig
spear: Use upper case for CONFIG options ConvertCONFIG_SPL_CRYPTO_SUPPORTtoKconfigConvertCONFIG_SPL_HASH_SUPPORTtoKconfigConvertCONFIG_SPL_DMA_SUPPORTtoKconfigConvertCONFIG_SPL_DRIVERS_MISC_SUPPORTtoKconfigConvertCONFIG_SPL_ENV_SUPPORTtoKconfigConvertCONFIG_SPL_ETH_SUPPORTtoKconfigConvertCONFIG_SPL_EXT_SUPPORTtoKconfigConvertCONFIG_SPL_FAT_SUPPORTtoKconfigConvertCONFIG_SPL_GPIO_SUPPORTtoKconfigConvertCONFIG_SPL_I2C_SUPPORTtoKconfigConvertCONFIG_SPL_LIBCOMMON_SUPPORTtoKconfigConvertCONFIG_SPL_LIBDISK_SUPPORTtoKconfigConvertCONFIG_SPL_LIBGENERIC_SUPPORTtoKconfigConvertCONFIG_SPL_MMC_SUPPORTtoKconfigConvertCONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORTtoKconfigConvertCONFIG_SPL_MTD_SUPPORTtoKconfigConvertCONFIG_SPL_MUSB_NEW_SUPPORTtoKconfigConvertCONFIG_SPL_NAND_SUPPORTtoKconfigConvertCONFIG_SPL_NET_VCI_STRINGtoKconfigConvertCONFIG_SPL_NET_SUPPORTtoKconfigConvertCONFIG_SPL_NOR_SUPPORTtoKconfigConvertCONFIG_SPL_ONENAND_SUPPORTtoKconfigRemoveCONFIG_SPL_PINCTRL_SUPPORT
ConvertCONFIG_SPL_POWER_SUPPORTtoKconfigConvertCONFIG_SPL_SATA_SUPPORTtoKconfig
Quoted 8 lines
Convert
CONFIG_SPL_SERIAL_SUPPORTtoKconfigConvertCONFIG_SPL_SPI_FLASH_SUPPORTtoKconfigConvertCONFIG_SPL_SPI_SUPPORTtoKconfigConvertCONFIG_SPL_USBETH_SUPPORTtoKconfigConvertCONFIG_SPL_USB_HOST_SUPPORTtoKconfigConvertCONFIG_SPL_USB_SUPPORTtoKconfigConvertCONFIG_SPL_WATCHDOG_SUPPORTtoKconfigConvertCONFIG_SPL_YMODEM_SUPPORTtoKconfig
Many thanks for this big work!
Do you have this patches in a git repo?
I want to test this patches with tbot testcase:
https://github.com/hsdenx/tbot/blob/master/src/tc/uboot/tc_uboot_check_kconfig.py
if this series does not break boards ...
bye,
Heiko
Signature · 2 lines
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
v3 cover Kconfig: Move CONFIG_SPL_..._SUPPORT to Kconfig
Hi Heiko,
Quoted 125 lines · Heiko Schocher
Hello Simon,
Am 13.09.2016 um 07:18 schrieb Simon Glass:
Quoted 111 lines
This series moves all the CONFIG_SPL_..._SUPPORT options to
Kconfigand fixes up existing boards to continue to build.It also adds a few small but useful features to moveconfig.
There is existing work going on in this area, so some of these patches may be superseded. It has taken me a while to get this building cleanly. But I have run out of time so want to get this out.
As mentioned on a recent thread [1] there is some confusion about whether an
option means enabling driver support or media support. Andrew's recent series seems like a good vehicle to tidy that up. But I hope this series will make it easier.NOTE: in the v2 series I have tried to use common things in
Kconfigto reduce the diffs in the defconfig files. This has helped a fair bit. But it
is very error-prone and time consuming. Also I have had to add some exceptions (disabling an option in specific board configs). Overall it was not a pleasant experience :-(There are a few strange features of this conversion. The main difficulty is
that some PowerPC boards do things like this in their board config file:This means that TPL reuses the SPL options. We can't support this in
Kconfig
so I have added a small number ofCONFIG_TPL_xxx_SUPPORToptions to cope with this. This made the conversion more painful than it should have been.A related issue is boards using a common header file and setting options only
for SPL:This is not noticed by moveconfig so we have to clean it up manually. Also there are a few incorrect things where
Kconfigoptions are set with #define:Finally, many defconfig files are not ordered correctly, resulting in larger
patches than we might like. It would be great to have a solution for this, perhaps with buildman providing a warning. But it might slow down development.The series is fully build-tested (for bisectability) and causes no failures
for the boards that already pass. The following boards fail for me at present on mainline (which I have not yet looked at):01: buildman
blackfin: + cm-bf527 bf609-ezkit bf537-stamp sparc: + grsim grsim_leon2 gr_cpci_ax2000 gr_xc3s_1500 gr_ep2s60 nios2: + 10m50 3c120microblaze: + microblaze-generic
openrisc: + openrisc-generic[1] https://patchwork.ozlabs.org/patch/661511/
Changes in v3:
- MoveSPL_NET_VCI_STRINGinto the SPLKconfigfile also
- Rebase on masterChanges in v2:
- Add some notes on this option tomoveconfig.py
- Improve the commit message and add one for resyncing with savedefconfig
- Add some notes on this option tomoveconfig.py
- Add new patch to convertCONFIG_SPL_NET_VCI_STRING
- DropCONFIG_SPL_PINCTRL_SUPPORT
- Lots of work to make use of common values across multiple boards
- Added a patch to change 'spear' CONFIGs to upper caseSimon Glass (45):
Correct defconfigs using savedefconfig
moveconfig: Add an option to skip prompts
moveconfig: Add an option to commit changes
Kconfig: Move SPL settings into their own file
arm: fsl: Adjust ordering of #ifndefCONFIG_SPL_BUILDDropCONFIG_SPL_RAM_SUPPORT
Use separate options for TPL support
Kconfig: spl: Add SPL support options toKconfig
Kconfig: tpl: Add some TPL support options toKconfigMove existing use ofCONFIG_SPL_DMtoKconfigMove existing use ofCONFIG_SPL_RSAtoKconfig
spear: Use upper case for CONFIG options ConvertCONFIG_SPL_CRYPTO_SUPPORTtoKconfigConvertCONFIG_SPL_HASH_SUPPORTtoKconfigConvertCONFIG_SPL_DMA_SUPPORTtoKconfigConvertCONFIG_SPL_DRIVERS_MISC_SUPPORTtoKconfigConvertCONFIG_SPL_ENV_SUPPORTtoKconfigConvertCONFIG_SPL_ETH_SUPPORTtoKconfigConvertCONFIG_SPL_EXT_SUPPORTtoKconfigConvertCONFIG_SPL_FAT_SUPPORTtoKconfigConvertCONFIG_SPL_GPIO_SUPPORTtoKconfigConvertCONFIG_SPL_I2C_SUPPORTtoKconfigConvertCONFIG_SPL_LIBCOMMON_SUPPORTtoKconfigConvertCONFIG_SPL_LIBDISK_SUPPORTtoKconfigConvertCONFIG_SPL_LIBGENERIC_SUPPORTtoKconfigConvertCONFIG_SPL_MMC_SUPPORTtoKconfigConvertCONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORTtoKconfigConvertCONFIG_SPL_MTD_SUPPORTtoKconfigConvertCONFIG_SPL_MUSB_NEW_SUPPORTtoKconfigConvertCONFIG_SPL_NAND_SUPPORTtoKconfigConvertCONFIG_SPL_NET_VCI_STRINGtoKconfigConvertCONFIG_SPL_NET_SUPPORTtoKconfigConvertCONFIG_SPL_NOR_SUPPORTtoKconfigConvertCONFIG_SPL_ONENAND_SUPPORTtoKconfigRemoveCONFIG_SPL_PINCTRL_SUPPORT
ConvertCONFIG_SPL_POWER_SUPPORTtoKconfigConvertCONFIG_SPL_SATA_SUPPORTtoKconfigQuoted 8 lines
Convert
CONFIG_SPL_SERIAL_SUPPORTtoKconfigConvertCONFIG_SPL_SPI_FLASH_SUPPORTtoKconfigConvertCONFIG_SPL_SPI_SUPPORTtoKconfigConvertCONFIG_SPL_USBETH_SUPPORTtoKconfigConvertCONFIG_SPL_USB_HOST_SUPPORTtoKconfigConvertCONFIG_SPL_USB_SUPPORTtoKconfigConvertCONFIG_SPL_WATCHDOG_SUPPORTtoKconfigConvertCONFIG_SPL_YMODEM_SUPPORTtoKconfig
Quoted 7 lines
Many thanks for this big work!
Do you have this patches in a git repo?
I want to test this patches with tbot testcase:
https://github.com/hsdenx/tbot/blob/master/src/tc/uboot/tc_uboot_check_kconfig.pyif this series does not break boards ...
Yes it is in u-boot-dm/kconfig-working2.
Regards,
Simon
v3 cover Kconfig: Move CONFIG_SPL_..._SUPPORT to Kconfig
Hello Simon,
Am 13.09.2016 um 15:08 schrieb Simon Glass:
Quoted 130 lines
Hi Heiko,
Quoted 127 lines · Heiko Schocher
Hello Simon,
Am 13.09.2016 um 07:18 schrieb Simon Glass:
Quoted 111 lines
This series moves all the CONFIG_SPL_..._SUPPORT options to
Kconfigand fixes up existing boards to continue to build.It also adds a few small but useful features to moveconfig.
There is existing work going on in this area, so some of these patches may be superseded. It has taken me a while to get this building cleanly. But I have run out of time so want to get this out.
As mentioned on a recent thread [1] there is some confusion about whether an
option means enabling driver support or media support. Andrew's recent series seems like a good vehicle to tidy that up. But I hope this series will make it easier.NOTE: in the v2 series I have tried to use common things in
Kconfigto reduce the diffs in the defconfig files. This has helped a fair bit. But it
is very error-prone and time consuming. Also I have had to add some exceptions (disabling an option in specific board configs). Overall it was not a pleasant experience :-(There are a few strange features of this conversion. The main difficulty is
that some PowerPC boards do things like this in their board config file:This means that TPL reuses the SPL options. We can't support this in
Kconfig
so I have added a small number ofCONFIG_TPL_xxx_SUPPORToptions to cope with this. This made the conversion more painful than it should have been.A related issue is boards using a common header file and setting options only
for SPL:This is not noticed by moveconfig so we have to clean it up manually. Also there are a few incorrect things where
Kconfigoptions are set with #define:Finally, many defconfig files are not ordered correctly, resulting in larger
patches than we might like. It would be great to have a solution for this, perhaps with buildman providing a warning. But it might slow down development.The series is fully build-tested (for bisectability) and causes no failures
for the boards that already pass. The following boards fail for me at present on mainline (which I have not yet looked at):01: buildman
blackfin: + cm-bf527 bf609-ezkit bf537-stamp sparc: + grsim grsim_leon2 gr_cpci_ax2000 gr_xc3s_1500 gr_ep2s60 nios2: + 10m50 3c120microblaze: + microblaze-generic
openrisc: + openrisc-generic[1] https://patchwork.ozlabs.org/patch/661511/
Changes in v3:
- MoveSPL_NET_VCI_STRINGinto the SPLKconfigfile also
- Rebase on masterChanges in v2:
- Add some notes on this option tomoveconfig.py
- Improve the commit message and add one for resyncing with savedefconfig
- Add some notes on this option tomoveconfig.py
- Add new patch to convertCONFIG_SPL_NET_VCI_STRING
- DropCONFIG_SPL_PINCTRL_SUPPORT
- Lots of work to make use of common values across multiple boards
- Added a patch to change 'spear' CONFIGs to upper caseSimon Glass (45):
Correct defconfigs using savedefconfig
moveconfig: Add an option to skip prompts
moveconfig: Add an option to commit changes
Kconfig: Move SPL settings into their own file
arm: fsl: Adjust ordering of #ifndefCONFIG_SPL_BUILDDropCONFIG_SPL_RAM_SUPPORT
Use separate options for TPL support
Kconfig: spl: Add SPL support options toKconfig
Kconfig: tpl: Add some TPL support options toKconfigMove existing use ofCONFIG_SPL_DMtoKconfigMove existing use ofCONFIG_SPL_RSAtoKconfig
spear: Use upper case for CONFIG options ConvertCONFIG_SPL_CRYPTO_SUPPORTtoKconfigConvertCONFIG_SPL_HASH_SUPPORTtoKconfigConvertCONFIG_SPL_DMA_SUPPORTtoKconfigConvertCONFIG_SPL_DRIVERS_MISC_SUPPORTtoKconfigConvertCONFIG_SPL_ENV_SUPPORTtoKconfigConvertCONFIG_SPL_ETH_SUPPORTtoKconfigConvertCONFIG_SPL_EXT_SUPPORTtoKconfigConvertCONFIG_SPL_FAT_SUPPORTtoKconfigConvertCONFIG_SPL_GPIO_SUPPORTtoKconfigConvertCONFIG_SPL_I2C_SUPPORTtoKconfigConvertCONFIG_SPL_LIBCOMMON_SUPPORTtoKconfigConvertCONFIG_SPL_LIBDISK_SUPPORTtoKconfigConvertCONFIG_SPL_LIBGENERIC_SUPPORTtoKconfigConvertCONFIG_SPL_MMC_SUPPORTtoKconfigConvertCONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORTtoKconfigConvertCONFIG_SPL_MTD_SUPPORTtoKconfigConvertCONFIG_SPL_MUSB_NEW_SUPPORTtoKconfigConvertCONFIG_SPL_NAND_SUPPORTtoKconfigConvertCONFIG_SPL_NET_VCI_STRINGtoKconfigConvertCONFIG_SPL_NET_SUPPORTtoKconfigConvertCONFIG_SPL_NOR_SUPPORTtoKconfigConvertCONFIG_SPL_ONENAND_SUPPORTtoKconfigRemoveCONFIG_SPL_PINCTRL_SUPPORT
ConvertCONFIG_SPL_POWER_SUPPORTtoKconfigConvertCONFIG_SPL_SATA_SUPPORTtoKconfigQuoted 8 lines
Convert
CONFIG_SPL_SERIAL_SUPPORTtoKconfigConvertCONFIG_SPL_SPI_FLASH_SUPPORTtoKconfigConvertCONFIG_SPL_SPI_SUPPORTtoKconfigConvertCONFIG_SPL_USBETH_SUPPORTtoKconfigConvertCONFIG_SPL_USB_HOST_SUPPORTtoKconfigConvertCONFIG_SPL_USB_SUPPORTtoKconfigConvertCONFIG_SPL_WATCHDOG_SUPPORTtoKconfigConvertCONFIG_SPL_YMODEM_SUPPORTtoKconfigMany thanks for this big work!
Quoted 7 lines
Quoted 5 lines
Do you have this patches in a git repo?
I want to test this patches with tbot testcase:
https://github.com/hsdenx/tbot/blob/master/src/tc/uboot/tc_uboot_check_kconfig.pyif this series does not break boards ...
Yes it is in u-boot-dm/kconfig-working2.
Thanks! Started from commit:
commit 5ed2ac345a2f5a613708a4fda9412eb4455d5109
Author: Simon Glass <[email protected]> Date: Sat Aug 27 19:55:16 2016 -0600
Correct defconfigs using savedefconfig
until
commit 96f50085eba4631013e7a5774d8da26c25e72d60
Author: Simon Glass <[email protected]> Date: Sat Aug 20 18:53:31 2016 -0600
Convert CONFIG_SPL_YMODEM_SUPPORT to Kconfig
Hmm ... I get immediately this error:
testing board 10m50 1 / 1196
testing board 3c120 2 / 1196
testing board A10-OLinuXino-Lime 3 / 1196
A10-OLinuXino-Lime u-boot spl bin diff f1da4b556e6ab90d370b5bf827fe7c31 != 94e85eb2c9e7ed2026977d7a814aab6d
testing board A10s-OLinuXino-M 4 / 1196
Hmm... may we have a problem with building SPL binaries reproducable?
First I say No...
pollux:u-boot-none hs [master] $ make mrproper
[...]
pollux:u-boot-none hs [master] $ make A10-OLinuXino-Lime_defconfig [...]
pollux:u-boot-none hs [master] $ make -s -j8 all
[...]
pollux:u-boot-none hs [master] $ md5sum spl/u-boot-spl.bin 94e85eb2c9e7ed2026977d7a814aab6d spl/u-boot-spl.bin pollux:u-boot-none hs [master] $ make mrproper
[...]
pollux:u-boot-none hs [master] $ make A10-OLinuXino-Lime_defconfig [...]
pollux:u-boot-none hs [master] $ make -s -j8 all
[...]
pollux:u-boot-none hs [master] $
pollux:u-boot-none hs [master] $ md5sum spl/u-boot-spl.bin 94e85eb2c9e7ed2026977d7a814aab6d spl/u-boot-spl.bin pollux:u-boot-none hs [master] $
Same md5sum ... puh.
Applying your first patch, which does not introduce any change for the A10-OLinuXino-Lime board, and I get the same md5sum ... puh, the test seems working ...
I try to find out more ... I just have to leave now ...
And sorry for being so annoying ...
bye,
Heiko
Signature · 2 lines
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
v3 cover Kconfig: Move CONFIG_SPL_..._SUPPORT to Kconfig
In reply to Simon GlassQuoted 42 lines · Simon Glass
This series moves all the CONFIG_SPL_..._SUPPORT options to
Kconfigand fixes up existing boards to continue to build.It also adds a few small but useful features to moveconfig.
There is existing work going on in this area, so some of these patches may be superseded. It has taken me a while to get this building cleanly. But I have run out of time so want to get this out.
As mentioned on a recent thread [1] there is some confusion about whether an option means enabling driver support or media support. Andrew's recent series seems like a good vehicle to tidy that up. But I hope this series will make it easier.
NOTE: in the v2 series I have tried to use common things in
Kconfigto reduce the diffs in the defconfig files. This has helped a fair bit. But it is very error-prone and time consuming. Also I have had to add some exceptions (disabling an option in specific board configs). Overall it was not a pleasant experience :-(There are a few strange features of this conversion. The main difficulty is that some PowerPC boards do things like this in their board config file:
This means that TPL reuses the SPL options. We can't support this in
Kconfigso I have added a small number ofCONFIG_TPL_xxx_SUPPORToptions to cope with this. This made the conversion more painful than it should have been.A related issue is boards using a common header file and setting options only for SPL:
This is not noticed by moveconfig so we have to clean it up manually. Also there are a few incorrect things where
Kconfigoptions are set with #define:Finally, many defconfig files are not ordered correctly, resulting in larger patches than we might like. It would be great to have a solution for this, perhaps with buildman providing a warning. But it might slow down development.
The series is fully build-tested (for bisectability) and causes no failures for the boards that already pass. The following boards fail for me at present on mainline (which I have not yet looked at):
Quoted 8 lines
01: buildman
blackfin: + cm-bf527 bf609-ezkit bf537-stamp sparc: + grsim grsim_leon2 gr_cpci_ax2000 gr_xc3s_1500 gr_ep2s60 nios2: + 10m50 3c120 microblaze: + microblaze-generic openrisc: + openrisc-generic
This is not totally size neutral. I've looked over the changes and in some cases, strings just get resized slightly, and, it happens. In other cases, it comes down to the "fun" games I did on am335x to support network booting in SPL and the size constrains that can be run into there, along with just including extra stuff. It all still links, so I'll clean up that config afterwards.
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160918/df25efe6/attachment.sig>
v3 cover Kconfig: Move CONFIG_SPL_..._SUPPORT to Kconfig
Hi Tom,
Quoted 51 lines · Tom Rini
Quoted 49 lines · Simon Glass
This series moves all the CONFIG_SPL_..._SUPPORT options to
Kconfigand fixes up existing boards to continue to build.It also adds a few small but useful features to moveconfig.
There is existing work going on in this area, so some of these patches may be superseded. It has taken me a while to get this building cleanly. But I have run out of time so want to get this out.
As mentioned on a recent thread [1] there is some confusion about whether an option means enabling driver support or media support. Andrew's recent series seems like a good vehicle to tidy that up. But I hope this series will make it easier.
NOTE: in the v2 series I have tried to use common things in
Kconfigto reduce the diffs in the defconfig files. This has helped a fair bit. But it is very error-prone and time consuming. Also I have had to add some exceptions (disabling an option in specific board configs). Overall it was not a pleasant experience :-(There are a few strange features of this conversion. The main difficulty is that some PowerPC boards do things like this in their board config file:
This means that TPL reuses the SPL options. We can't support this in
Kconfigso I have added a small number ofCONFIG_TPL_xxx_SUPPORToptions to cope with this. This made the conversion more painful than it should have been.A related issue is boards using a common header file and setting options only for SPL:
This is not noticed by moveconfig so we have to clean it up manually. Also there are a few incorrect things where
Kconfigoptions are set with #define:Finally, many defconfig files are not ordered correctly, resulting in larger patches than we might like. It would be great to have a solution for this, perhaps with buildman providing a warning. But it might slow down development.
The series is fully build-tested (for bisectability) and causes no failures for the boards that already pass. The following boards fail for me at present on mainline (which I have not yet looked at):
01: buildman
blackfin: + cm-bf527 bf609-ezkit bf537-stamp sparc: + grsim grsim_leon2 gr_cpci_ax2000 gr_xc3s_1500 gr_ep2s60 nios2: + 10m50 3c120 microblaze: + microblaze-generic openrisc: + openrisc-generic
Quoted 8 lines
Quoted 1 line
This is not totally size neutral. I've looked over the changes and in some cases, strings just get resized slightly, and, it happens. In other cases, it comes down to the "fun" games I did on am335x to support network booting in SPL and the size constrains that can be run into there, along with just including extra stuff. It all still links, so I'll clean up that config afterwards.
The latter is a funny case. I assumed something interesting was going on but didn't dig into what.
It would be helpful if SoC maintainers would take a look at the resulting defconfig files with their boards and see if some of the variation could be removed. E.g. I suspect that some boards disable a particular option for no particular reason. More uniformity (by setting defaults in Kconfig however distasteful) will reduce the defconfig size.
Quoted 2 lines
--
Tom