Documentation: imd: fix sphinx warning
PATCH 1/1 Documentation: imd: fix sphinx warning
The patch fixes this sphinx warnings:
barebox/Documentation/user/imd.rst:27: WARNING: Could not lex literal_block as "c". Highlighting skipped.
Signed-off-by Antony Pavlov <[email protected]>
Cc Sascha Hauer <[email protected]>
--- Documentation/user/imd.rst | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
Documentation/user/imd.rst +6 -2
@@ -22,7 +22,9 @@ The informations can be extracted with the ``bareboximd`` tool which lives under ``scripts/`` in the barebox sourcecode. If enabled it is compiled for the compile host and also for the target architecture. barebox itself has the :ref:`command_imd` command to extract the informations. Here is an example output of the tool called -without additional options:: +without additional options: + +.. code-block:: none # imd barebox-phytec-pbab01dl-1gib.img build: #890 Wed Jul 30 16:15:24 CEST 2014
@@ -31,7 +33,9 @@ without additional options:: of_compatible: phytec,imx6x-pbab01 phytec,imx6dl-pfla02 fsl,imx6dl model: Phytec phyFLEX-i.MX6 Duallite Carrier-Board -Single informations can be extracted with the ``-t <type>`` option:: +Single informations can be extracted with the ``-t <type>`` option: + +.. code-block:: none # imd barebox-phytec-pbab01dl-1gib.img -t release 2014.07.0-00167-ge6632a9-dirty
Signature · 7 lines
2.9.3 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
Sascha Hauer
AppliedQuoted 9 lines · Antony Pavlov
The patch fixes this sphinx warnings:
barebox/Documentation/user/imd.rst:27: WARNING: Could not lexliteral_blockas "c". Highlighting skipped.Signed-off-by Antony Pavlov <[email protected]>Cc Sascha Hauer <[email protected]>--- Documentation/user/imd.rst | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
Applied, thanks
Sascha
Quoted 31 lines
Documentation/user/imd.rst +6
-2@@ -22,7 +22,9 @@ The informations can be extracted with the ``bareboximd`` tool which lives under ``scripts/`` in the barebox sourcecode. If enabled it is compiled for the compile host and also for the target architecture. barebox itself has the :ref:`command_imd` command to extract the informations. Here is an example output of the tool called -without additional options:: +without additional options: + +.. code-block:: none # imd barebox-phytec-pbab01dl-1gib.img build: #890 Wed Jul 30 16:15:24 CEST 2014@@ -31,7 +33,9 @@ without additional options:: of_compatible: phytec,imx6x-pbab01 phytec,imx6dl-pfla02 fsl,imx6dl model: Phytec phyFLEX-i.MX6 Duallite Carrier-Board -Single informations can be extracted with the ``-t <type>`` option:: +Single informations can be extracted with the ``-t <type>`` option: + +.. code-block:: none # imd barebox-phytec-pbab01dl-1gib.img -t release 2014.07.0-00167-ge6632a9-dirtySignature · 1 line
2.9.3
Signature · 9 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox