PCI/Hotplug: Clear power fault detected when servicing faults
RFC 1/1 PCI/Hotplug: Clear power fault detected when servicing faults
A slot is allowed to implement power fault detection without having a power controller present. Current code can set the controller's power_fault_detected when seeing a power fault interrupt, but cannot clear the flag without a power controller present. This patch clears the flag when the power fault event is serviced by the interrupt event handler.
This is mostly based on my interpretation of the spec for Slot Status's PFD and Slot Cap's PCP. The relevant pieces are at [1] and [2].
[1]: PCIe r3.1a 7.8.11: Slot Status PFD description:
Note that, depending on hardware capability, it is possible that a power fault can be detected at any time, independent of the Power Controller Control setting or the occupancy of the slot.
[2]: PCIe r3.1a 6.7.2.4: Power Fault Detected description seems to imply that the status bit is independent of the Power Controller Present and Control bits.
--- drivers/pci/hotplug/pciehp_ctrl.c | 1 + 1 file changed, 1 insertion(+)
drivers/pci/hotplug/pciehp_ctrl.c +1 -0
@@ -381,6 +381,7 @@ static void interrupt_event_handler(struct work_struct *work)handle_button_press_event (p_slot);break ;case INT_POWER_FAULT : + ctrl->power_fault_detected =0 ;if (!POWER_CTRL (ctrl))break ;pciehp_set_attention_status (p_slot,1 );
Signature · 1 line
1.8.3.1
I was far too eager with this one. Found a case this morning which resulted in a soft lockup. Please kill this for now.
Quoted 6 lines · Jon Derrick
A slot is allowed to implement power fault detection without having a power controller present. Current code can set the controller's
power_fault_detectedwhen seeing a power fault interrupt, but cannot clear the flag without a power controller present. This patch clears the flag when the power fault event is serviced by the interrupt event handler.