Skip to contentSkip to conversation

configs: nitrogen*: bump kernel and u-boot revision

PATCH New Gary Bisson 2 participants 2 messages Sep 26, 2016

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 configs: nitrogen*: bump kernel and u-boot revision

Here are the main U-Boot modifications:
- Add Spansion flash support
- Add secure boot (HAB) support

Here are the main Linux modifications:
- Add HDMI2CSI 75Hz support
- Add KD024FM display support
- Fix PCIe reset gpios in device tree
- Backport xhci fixes from mainline
- Fix SOM PHY address bug
- Enable IPU Prefetch engine for 6QP
- Fix ft5x06 touch bug

---
Hi all,

This revision bump is mainly due to the touch driver issue fix that is needed by several customers. Also the IPU prefetch configuration for 6QP devices was missing, will increase performances.

Regards,
Gary

---
 configs/nitrogen6sx_defconfig | 4 ++--
 configs/nitrogen6x_defconfig  | 4 ++--
 configs/nitrogen7_defconfig   | 4 ++--
 3 files changed, 6 insertions(+), 6 deletions(-)
configs/nitrogen6sx_defconfig +2 -2
index b317525..3509ef0 100644
@@ -26,13 +26,13 @@ BR2_TARGET_UBOOT_BOARDNAME="nitrogen6sx"
 BR2_TARGET_UBOOT_FORMAT_IMX=y
 BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
 # Last version of branch boundary-v2016.03
-BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot-imx6/archive/12f31130.tar.gz"
+BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot-imx6/archive/1ac27109.tar.gz"
 
 # kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
 # Last version of branch boundary-imx_4.1.15_1.0.0_ga
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/linux-imx6/archive/be36042a.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/linux-imx6/archive/207addbe.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="boundary"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
configs/nitrogen6x_defconfig +2 -2
index dc033dc..9eb0daa 100644
@@ -26,13 +26,13 @@ BR2_TARGET_UBOOT_BOARDNAME="nitrogen6q"
 BR2_TARGET_UBOOT_FORMAT_IMX=y
 BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
 # Last version of branch boundary-v2016.03
-BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot-imx6/archive/12f31130.tar.gz"
+BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot-imx6/archive/1ac27109.tar.gz"
 
 # kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
 # Last version of branch boundary-imx_4.1.15_1.0.0_ga
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/linux-imx6/archive/be36042a.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/linux-imx6/archive/207addbe.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="boundary"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
configs/nitrogen7_defconfig +2 -2
index adce0fb..e1fd58b 100644
@@ -25,13 +25,13 @@ BR2_TARGET_UBOOT_BOARDNAME="nitrogen7"
 BR2_TARGET_UBOOT_FORMAT_IMX=y
 BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
 # Last version of branch boundary-v2016.03
-BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot-imx6/archive/12f31130.tar.gz"
+BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot-imx6/archive/1ac27109.tar.gz"
 
 # kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
 # Last version of branch boundary-imx_4.1.15_1.0.0_ga
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/linux-imx6/archive/be36042a.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/linux-imx6/archive/207addbe.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="boundary"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
Signature · 1 line
2.9.3
#1 lore raw

PATCH 1/1 configs: nitrogen*: bump kernel and u-boot revision

Hello,

Quoted 13 lines · Gary Bisson

Here are the main U-Boot modifications:
- Add Spansion flash support
- Add secure boot (HAB) support

Here are the main Linux modifications:
- Add HDMI2CSI 75Hz support
- Add KD024FM display support
- Fix PCIe reset gpios in device tree
- Backport xhci fixes from mainline
- Fix SOM PHY address bug
- Enable IPU Prefetch engine for 6QP
- Fix ft5x06 touch bug

Quoted 3 lines

---
Hi all,

Applied to master, thanks.

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com