btrfs-progs: fix user-facing typos
Subsystems (2)
PATCH 1/1 btrfs-progs: fix user-facing typos
Hi,
I found these with lintian (analysis tool for Debian packages) this evening, and hope this patch is well received :-) The only bit I'm unsure about is the deletion of what looks like extra whitespace on the last changed line of the patch.
Cheers,
Nicholas
Nicholas D Steeves (1):
Fix user-facing typos
Documentation/btrfs-check.asciidoc | 2 +- Documentation/btrfs-device.asciidoc | 2 +- Documentation/btrfs-man5.asciidoc | 2 +- Documentation/btrfs-scrub.asciidoc | 2 +- Documentation/btrfstune.asciidoc | 2 +- btrfs-convert.c | 2 +- cmds-check.c | 6 +++--- 7 files changed, 9 insertions(+), 9 deletions(-)
Signature · 1 line
2.9.3
PATCH 1/1 Fix user-facing typos
Signed-off-by Nicholas D Steeves <[email protected]>
--- Documentation/btrfs-check.asciidoc | 2 +- Documentation/btrfs-device.asciidoc | 2 +- Documentation/btrfs-man5.asciidoc | 2 +- Documentation/btrfs-scrub.asciidoc | 2 +- Documentation/btrfstune.asciidoc | 2 +- btrfs-convert.c | 2 +- cmds-check.c | 6 +++--- 7 files changed, 9 insertions(+), 9 deletions(-)
Documentation/btrfs-check.asciidoc +1 -1
@@ -20,7 +20,7 @@ by the option '--readonly'. *btrfsck* is an alias of *btrfs check* command and is now deprecated. -WARNING: Do not use '--repair' unless you are adviced to by a developer, an +WARNING: Do not use '--repair' unless you are advised to by a developer, an experienced user or accept the fact that 'fsck' cannot possibly fix all sorts of damage that could happen to a filesystem because of software and hardware bugs.
Documentation/btrfs-device.asciidoc +1 -1
@@ -27,7 +27,7 @@ The device management works on a mounted filesystem. Devices can be added, removed or replaced, by commands profided by *btrfs device* and *btrfs replace*. The profiles can be also changed, provided there's enough workspace to do the -conversion, using the *btrfs balance* comand and namely the filter 'convert'. +conversion, using the *btrfs balance* command and namely the filter 'convert'. Profile:: A profile describes an allocation policy based on the redundancy/replication
Documentation/btrfs-man5.asciidoc +1 -1
@@ -562,7 +562,7 @@ crw------- 1 root root 10, 234 Jan 1 12:00 /dev/btrfs-control The device accepts some ioctl calls that can perform following actions on the filesyste module: -* scan devices for btrfs filesytem (ie. to let multi-device filesystems mount +* scan devices for btrfs filesystem (ie. to let multi-device filesystems mount automatically) and register them with the kernel module * similar to scan, but also wait until the device scanning process is finished for a given filesystem
Documentation/btrfs-scrub.asciidoc +1 -1
@@ -20,7 +20,7 @@ structural damage in the filesystem. The user is supposed to run it manually or via a periodic system service. The recommended period is a month but could be less. The estimated device bandwidth -utilization is about 80% on an idle filesytem. The IO priority class is by +utilization is about 80% on an idle filesystem. The IO priority class is by default 'idle' so background scrub should not interfere with normal filesystem operation significantly.
Documentation/btrfstune.asciidoc +1 -1
@@ -20,7 +20,7 @@ complete list of features and kernel version of their introduction at https://btrfs.wiki.kernel.org/index.php/Changelog#By_feature . Also, the manual page `mkfs.btrfs`(8) contains more details about the features. -Some of the features could be enabled on a mounted filesytem. Please refer to +Some of the features could be enabled on a mounted filesystem. Please refer to the respective section in `btrfs`(5). OPTIONS
btrfs-convert.c +1 -1
@@ -3016,7 +3016,7 @@ static void print_usage(void)printf ("\t-O|--features LIST comma separated list of filesystem features\n" );printf ("\t--no-progress show only overview, not the detailed progress\n" );printf ("\n" ); -printf ("Suported filesystems:\n" ); +printf ("Supported filesystems:\n" );printf ("\text2/3/4: %s\n" ,BTRFSCONVERT_EXT2 ?"yes" :"no" ); }
cmds-check.c +3 -3
@@ -12550,14 +12550,14 @@ const char * const cmd_check_usage[] = {"--readonly run in read-only mode (default)" ,"--init-csum-tree create a new CRC tree" ,"--init-extent-tree create a new extent tree" , -"--mode <MODE> select mode, allows to make some memory/IO" , -" trade-offs, where MODE is one of:" , +"--mode <MODE> allows choice of memory/IO trade-offs" , +" where MODE is one of:" ," original - read inodes and extents to memory (requires" ," more memory, does less IO)" ," lowmem - try to use less memory but read blocks again" ," when needed" ,"--check-data-csum verify checksums of data blocks" , -"-Q|--qgroup-report print a report on qgroup consistency" , +"-Q|--qgroup-report print a report on qgroup consistency" ,"-E|--subvol-extents <subvolid>" ," print subvolume extents and sharing state" , "-r|--tree-root <bytenr> use the given bytenr for the tree root",
Signature · 1 line
2.9.3
David Sterba
AppliedRe: [PATCH] Fix user-facing typos
Quoted 1 line · Nicholas D Steeves
Signed-off-by Nicholas D Steeves <[email protected]>
Applied, thanks.
Re: [PATCH] btrfs-progs: fix user-facing typos (affects 4.7.3 and devel)
In reply to Nicholas D SteevesQuoted 13 lines · Nicholas D Steeves
Hi,
I found these with lintian (analysis tool for Debian packages) this evening, and hope this patch is well received :-) The only bit I'm unsure about is the deletion of what looks like extra whitespace on the last changed line of the patch.
Cheers,
NicholasNicholas D Steeves (1):
Fix user-facing typos
Quoted 12 lines
Documentation/btrfs-check.asciidoc | 2 +- Documentation/btrfs-device.asciidoc | 2 +- Documentation/btrfs-man5.asciidoc | 2 +- Documentation/btrfs-scrub.asciidoc | 2 +- Documentation/btrfstune.asciidoc | 2 +- btrfs-convert.c | 2 +- cmds-check.c | 6 +++--- 7 files changed, 9 insertions(+), 9 deletions(-)Signature · 1 line
2.9.3
P.S. The typos were found in btrfs-progs-v4.7.3, and this patch is against David Sterba's github copy of the devel branch.