Skip to contentSkip to conversation

ixgbe: remove SFP ixfi support

PATCH New Emil Tantilov 2 participants 3 messages Oct 4, 2016 – Nov 2, 2016

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/2 ixgbe: remove SFP ixfi support

Remove SFP ixfi code since there is no HW that currently supports it.

---
 drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c |   76 ++++---------------------
 1 file changed, 11 insertions(+), 65 deletions(-)
drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c +11 -65
index 7644a82..d4b8f8c 100644
@@ -1351,7 +1351,7 @@ ixgbe_setup_mac_link_sfp_x550em(struct ixgbe_hw *hw,
 				__always_unused bool autoneg_wait_to_complete)
 {
 	s32 status;
-	u16 slice, value;
+	u16 reg_slice, reg_val;
 	bool setup_linear = false;
 
 	/* Check if SFP module is supported and linear */
@@ -1367,71 +1367,17 @@ ixgbe_setup_mac_link_sfp_x550em(struct ixgbe_hw *hw,
 	if (status)
 		return status;
 
-	if (!(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) {
-		/* Configure CS4227 LINE side to 10G SR. */
-		slice = IXGBE_CS4227_LINE_SPARE22_MSB + (hw->bus.lan_id << 12);
-		value = IXGBE_CS4227_SPEED_10G;
-		status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227,
-							  slice, value);
-		if (status)
-			goto i2c_err;
-
-		slice = IXGBE_CS4227_LINE_SPARE24_LSB + (hw->bus.lan_id << 12);
-		value = (IXGBE_CS4227_EDC_MODE_SR << 1) | 1;
-		status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227,
-							  slice, value);
-		if (status)
-			goto i2c_err;
-
-		/* Configure CS4227 for HOST connection rate then type. */
-		slice = IXGBE_CS4227_HOST_SPARE22_MSB + (hw->bus.lan_id << 12);
-		value = speed & IXGBE_LINK_SPEED_10GB_FULL ?
-			IXGBE_CS4227_SPEED_10G : IXGBE_CS4227_SPEED_1G;
-		status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227,
-							  slice, value);
-		if (status)
-			goto i2c_err;
-
-		slice = IXGBE_CS4227_HOST_SPARE24_LSB + (hw->bus.lan_id << 12);
-		if (setup_linear)
-			value = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 1;
-		else
-			value = (IXGBE_CS4227_EDC_MODE_SR << 1) | 1;
-		status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227,
-							  slice, value);
-		if (status)
-			goto i2c_err;
-
-		/* Setup XFI internal link. */
-		status = ixgbe_setup_ixfi_x550em(hw, &speed);
-		if (status) {
-			hw_dbg(hw, "setup_ixfi failed with %d\n", status);
-			return status;
-		}
-	} else {
-		/* Configure internal PHY for KR/KX. */
-		status = ixgbe_setup_kr_speed_x550em(hw, speed);
-		if (status) {
-			hw_dbg(hw, "setup_kr_speed failed with %d\n", status);
-			return status;
-		}
-
-		/* Configure CS4227 LINE side to proper mode. */
-		slice = IXGBE_CS4227_LINE_SPARE24_LSB + (hw->bus.lan_id << 12);
-		if (setup_linear)
-			value = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 1;
-		else
-			value = (IXGBE_CS4227_EDC_MODE_SR << 1) | 1;
-		status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227,
-							  slice, value);
-		if (status)
-			goto i2c_err;
-	}
-
-	return 0;
+	/* Configure internal PHY for KR/KX. */
+	ixgbe_setup_kr_speed_x550em(hw, speed);
 
-i2c_err:
-	hw_dbg(hw, "combined i2c access failed with %d\n", status);
+	/* Configure CS4227 LINE side to proper mode. */
+	reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB + (hw->bus.lan_id << 12);
+	if (setup_linear)
+		reg_val = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1;
+	else
+		reg_val = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1;
+	status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227,
+						  reg_slice, reg_val);
 	return status;
 }
 
#1 lore raw

PATCH 2/2 ixgbe: use link instead of I2C combined abstraction

Introduce ixgbe_link_operations struct with the following changes:

read_i2c_combined => read_link
read_i2c_combined_unlocked => read_link_unlocked
write_i2c_combined => write_link
write_i2c_combined_unlocked => write_link_unlocked

This will allow X550EM_a to override these methods for MDIO access while X550EM_x provides methods to use I2C combined access. This also adds a new structure, ixgbe_link_info, to hold information about the link. Initially this is just method pointers and a bus address.

The functions involved in combined I2C accesses were moved from ixgbe_phy.c to ixgbe_x550.c. The underlying functions that carry out the combined I2C accesses were left in ixgbe_phy.c because they share some functions with other I2C methods.

---
 drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c  |   68 +---------------
 drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h  |   12 +--
 drivers/net/ethernet/intel/ixgbe/ixgbe_type.h |   26 +++++-
 drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c |  106 ++++++++++++++++++++++---
 4 files changed, 122 insertions(+), 90 deletions(-)
drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c +4 -64
index b883b31..78edf5b 100644
@@ -109,8 +109,8 @@ static u8 ixgbe_ones_comp_byte_add(u8 add1, u8 add2)
  *
  *  Returns an error code on error.
  */
-static s32 ixgbe_read_i2c_combined_generic_int(struct ixgbe_hw *hw, u8 addr,
-					       u16 reg, u16 *val, bool lock)
+s32 ixgbe_read_i2c_combined_generic_int(struct ixgbe_hw *hw, u8 addr,
+					u16 reg, u16 *val, bool lock)
 {
 	u32 swfw_mask = hw->phy.phy_semaphore_mask;
 	int max_retry = 10;
@@ -178,36 +178,6 @@ fail:
 }
 
 /**
- *  ixgbe_read_i2c_combined_generic - Perform I2C read combined operation
- *  @hw: pointer to the hardware structure
- *  @addr: I2C bus address to read from
- *  @reg: I2C device register to read from
- *  @val: pointer to location to receive read value
- *
- *  Returns an error code on error.
- */
-s32 ixgbe_read_i2c_combined_generic(struct ixgbe_hw *hw, u8 addr,
-				    u16 reg, u16 *val)
-{
-	return ixgbe_read_i2c_combined_generic_int(hw, addr, reg, val, true);
-}
-
-/**
- *  ixgbe_read_i2c_combined_generic_unlocked - Unlocked I2C read combined
- *  @hw: pointer to the hardware structure
- *  @addr: I2C bus address to read from
- *  @reg: I2C device register to read from
- *  @val: pointer to location to receive read value
- *
- *  Returns an error code on error.
- */
-s32 ixgbe_read_i2c_combined_generic_unlocked(struct ixgbe_hw *hw, u8 addr,
-					     u16 reg, u16 *val)
-{
-	return ixgbe_read_i2c_combined_generic_int(hw, addr, reg, val, false);
-}
-
-/**
  *  ixgbe_write_i2c_combined_generic_int - Perform I2C write combined operation
  *  @hw: pointer to the hardware structure
  *  @addr: I2C bus address to write to
@@ -217,8 +187,8 @@ s32 ixgbe_read_i2c_combined_generic_unlocked(struct ixgbe_hw *hw, u8 addr,
  *
  *  Returns an error code on error.
  */
-static s32 ixgbe_write_i2c_combined_generic_int(struct ixgbe_hw *hw, u8 addr,
-						u16 reg, u16 val, bool lock)
+s32 ixgbe_write_i2c_combined_generic_int(struct ixgbe_hw *hw, u8 addr,
+					 u16 reg, u16 val, bool lock)
 {
 	u32 swfw_mask = hw->phy.phy_semaphore_mask;
 	int max_retry = 1;
@@ -273,36 +243,6 @@ fail:
 }
 
 /**
- *  ixgbe_write_i2c_combined_generic - Perform I2C write combined operation
- *  @hw: pointer to the hardware structure
- *  @addr: I2C bus address to write to
- *  @reg: I2C device register to write to
- *  @val: value to write
- *
- *  Returns an error code on error.
- */
-s32 ixgbe_write_i2c_combined_generic(struct ixgbe_hw *hw,
-				     u8 addr, u16 reg, u16 val)
-{
-	return ixgbe_write_i2c_combined_generic_int(hw, addr, reg, val, true);
-}
-
-/**
- *  ixgbe_write_i2c_combined_generic_unlocked - Unlocked I2C write combined
- *  @hw: pointer to the hardware structure
- *  @addr: I2C bus address to write to
- *  @reg: I2C device register to write to
- *  @val: value to write
- *
- *  Returns an error code on error.
- */
-s32 ixgbe_write_i2c_combined_generic_unlocked(struct ixgbe_hw *hw,
-					      u8 addr, u16 reg, u16 val)
-{
-	return ixgbe_write_i2c_combined_generic_int(hw, addr, reg, val, false);
-}
-
-/**
  *  ixgbe_identify_phy_generic - Get physical layer module
  *  @hw: pointer to hardware structure
  *
drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h +4 -8
index cc735ec..ecf05f8 100644
@@ -195,12 +195,8 @@ s32 ixgbe_read_i2c_sff8472_generic(struct ixgbe_hw *hw, u8 byte_offset,
 				   u8 *sff8472_data);
 s32 ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
 				   u8 eeprom_data);
-s32 ixgbe_read_i2c_combined_generic(struct ixgbe_hw *hw, u8 addr,
-				    u16 reg, u16 *val);
-s32 ixgbe_read_i2c_combined_generic_unlocked(struct ixgbe_hw *hw, u8 addr,
-					     u16 reg, u16 *val);
-s32 ixgbe_write_i2c_combined_generic(struct ixgbe_hw *hw, u8 addr,
-				     u16 reg, u16 val);
-s32 ixgbe_write_i2c_combined_generic_unlocked(struct ixgbe_hw *hw, u8 addr,
-					      u16 reg, u16 val);
+s32 ixgbe_read_i2c_combined_generic_int(struct ixgbe_hw *, u8 addr, u16 reg,
+					u16 *val, bool lock);
+s32 ixgbe_write_i2c_combined_generic_int(struct ixgbe_hw *, u8 addr, u16 reg,
+					 u16 val, bool lock);
 #endif /* _IXGBE_PHY_H_ */
drivers/net/ethernet/intel/ixgbe/ixgbe_type.h +20 -6
index 312bffb..95f6a12 100644
@@ -3395,16 +3395,28 @@ struct ixgbe_phy_operations {
 	s32 (*read_i2c_sff8472)(struct ixgbe_hw *, u8 , u8 *);
 	s32 (*read_i2c_eeprom)(struct ixgbe_hw *, u8 , u8 *);
 	s32 (*write_i2c_eeprom)(struct ixgbe_hw *, u8, u8);
-	s32 (*read_i2c_combined)(struct ixgbe_hw *, u8 addr, u16 reg, u16 *val);
-	s32 (*write_i2c_combined)(struct ixgbe_hw *, u8 addr, u16 reg, u16 val);
 	s32 (*check_overtemp)(struct ixgbe_hw *);
 	s32 (*set_phy_power)(struct ixgbe_hw *, bool on);
 	s32 (*enter_lplu)(struct ixgbe_hw *);
 	s32 (*handle_lasi)(struct ixgbe_hw *hw);
-	s32 (*read_i2c_combined_unlocked)(struct ixgbe_hw *, u8 addr, u16 reg,
-					  u16 *value);
-	s32 (*write_i2c_combined_unlocked)(struct ixgbe_hw *, u8 addr, u16 reg,
-					   u16 value);
+	s32 (*read_i2c_byte_unlocked)(struct ixgbe_hw *, u8 offset, u8 addr,
+				      u8 *value);
+	s32 (*write_i2c_byte_unlocked)(struct ixgbe_hw *, u8 offset, u8 addr,
+				       u8 value);
+};
+
+struct ixgbe_link_operations {
+	s32 (*read_link)(struct ixgbe_hw *, u8 addr, u16 reg, u16 *val);
+	s32 (*read_link_unlocked)(struct ixgbe_hw *, u8 addr, u16 reg,
+				  u16 *val);
+	s32 (*write_link)(struct ixgbe_hw *, u8 addr, u16 reg, u16 val);
+	s32 (*write_link_unlocked)(struct ixgbe_hw *, u8 addr, u16 reg,
+				   u16 val);
+};
+
+struct ixgbe_link_info {
+	struct ixgbe_link_operations ops;
+	u8 addr;
 };
 
 struct ixgbe_eeprom_info {
@@ -3508,6 +3520,7 @@ struct ixgbe_hw {
 	struct ixgbe_addr_filter_info	addr_ctrl;
 	struct ixgbe_fc_info		fc;
 	struct ixgbe_phy_info		phy;
+	struct ixgbe_link_info		link;
 	struct ixgbe_eeprom_info	eeprom;
 	struct ixgbe_bus_info		bus;
 	struct ixgbe_mbx_info		mbx;
@@ -3531,6 +3544,7 @@ struct ixgbe_info {
 	const struct ixgbe_eeprom_operations	*eeprom_ops;
 	const struct ixgbe_phy_operations	*phy_ops;
 	const struct ixgbe_mbx_operations	*mbx_ops;
+	const struct ixgbe_link_operations	*link_ops;
 	const u32			*mvals;
 };
 
drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c +94 -12

158 lines not on this page · raw message

#2 lore raw

PATCH 1/2 ixgbe: remove SFP ixfi support

In reply to Emil Tantilov

-----Original Message-----
From: Intel-wired-lan [mailto:intel-wired-lan-bounces at lists.osuosl.org] On Behalf Of Emil Tantilov
Sent: Monday, October 3, 2016 5:10 PM
To: [email protected]
Subject: [Intel-wired-lan] [PATCH 1/2] ixgbe: remove SFP ixfi support

Remove SFP ixfi code since there is no HW that currently supports it.

---