parisc: Add cfi_startproc and cfi_endproc to assembly code
Helge Deller
maintainerPATCH 1/1 parisc: Add cfi_startproc and cfi_endproc to assembly code
Add ENTRY_CFI() and ENDPROC_CFI() macros for dwarf debug info and convert assembly users to new macros.
Signed-off-by Helge Deller <[email protected]>
arch/parisc/include/asm/linkage.h +12 -0
@@ -1,6 +1,8 @@#ifndef __ASM_PARISC_LINKAGE_H#define __ASM_PARISC_LINKAGE_H +#include <asm/dwarf.h> +#ifndef __ALIGN#define __ALIGN .align 4#define __ALIGN_STR ".align 4"
@@ -10,6 +12,8 @@* In parisc assembly a semicolon marks a comment while a * exclamation mark is used to separate independent lines. */ +#define ASM_NL ! +#ifdef __ASSEMBLY__#define ENTRY (name) \
@@ -26,6 +30,14 @@ name: END(name)#endif +#define ENTRY_CFI (name) \ + ENTRY(name) ASM_NL\ + CFI_STARTPROC + +#define ENDPROC_CFI (name) \ + ENDPROC(name) ASM_NL\ + CFI_ENDPROC +#endif /* __ASSEMBLY__ */ #endif /* __ASM_PARISC_LINKAGE_H */
arch/parisc/kernel/entry.S +24 -22
168 lines not on this page · raw message
arch/parisc/kernel/hpmc.S +2 -2
@@ -83,7 +83,7 @@ END(hpmc_pim_data) .text .import intr_save, code -ENTRY(os_hpmc) +ENTRY_CFI(os_hpmc) .os_hpmc: /*
@@ -299,7 +299,7 @@ os_hpmc_6: b . nop -ENDPROC(os_hpmc) +ENDPROC_CFI(os_hpmc) .os_hpmc_end:
arch/parisc/kernel/pacache.S +34 -34
211 lines not on this page · raw message
arch/parisc/kernel/real2.S +14 -10
@@ -61,7 +61,7 @@ save_cr_end: * iodc_fn is the IODC function to call */ -ENTRY(real32_call_asm) +ENTRY_CFI(real32_call_asm) STREG %rp, -RP_OFFSET(%sp) /* save RP */ #ifdef CONFIG_64BIT callee_save
@@ -119,14 +119,14 @@ ric_ret: LDREG -RP_OFFSET(%sp), %rp /* restore RP */ bv 0(%rp) nop -ENDPROC(real32_call_asm) +ENDPROC_CFI(real32_call_asm) # define PUSH_CR(r, where) mfctl r, %r1 ! STREG,ma %r1, REG_SZ(where) # define POP_CR(r, where) LDREG,mb -REG_SZ(where), %r1 ! mtctl %r1, r .text -save_control_regs: +ENTRY_CFI(save_control_regs) load32 PA(save_cr_space), %r28 PUSH_CR(%cr24, %r28) PUSH_CR(%cr25, %r28)
@@ -139,8 +139,9 @@ save_control_regs: PUSH_CR(%cr15, %r28) bv 0(%r2) nop +ENDPROC_CFI(save_control_regs) -restore_control_regs: +ENTRY_CFI(restore_control_regs) load32 PA(save_cr_end), %r26 POP_CR(%cr15, %r26) POP_CR(%cr31, %r26)
@@ -153,13 +154,14 @@ restore_control_regs: POP_CR(%cr24, %r26) bv 0(%r2) nop +ENDPROC_CFI(restore_control_regs) /* rfi_virt2real() and rfi_real2virt() could perhaps be adapted for * more general-purpose use by the several places which need RFIs */ .text .align 128 -rfi_virt2real: +ENTRY_CFI(rfi_virt2real) /* switch to real mode... */ rsm PSW_SM_I,%r0 load32 PA(rfi_v2r_1), %r1
@@ -191,10 +193,11 @@ rfi_v2r_1: tophys_r1 %r2 bv 0(%r2) nop +ENDPROC_CFI(rfi_virt2real) .text .align 128 -rfi_real2virt: +ENTRY_CFI(rfi_real2virt) rsm PSW_SM_I,%r0 load32 (rfi_r2v_1), %r1 nop
@@ -225,6 +228,7 @@ rfi_r2v_1: tovirt_r1 %r2 bv 0(%r2) nop +ENDPROC_CFI(rfi_real2virt) #ifdef CONFIG_64BIT
@@ -238,7 +242,7 @@ rfi_r2v_1: * arg0p points to where saved arg values may be found * iodc_fn is the IODC function to call */ -ENTRY(real64_call_asm) +ENTRY_CFI(real64_call_asm) std %rp, -0x10(%sp) /* save RP */ std %sp, -8(%arg0) /* save SP on real-mode stack */ copy %arg0, %sp /* adopt the real-mode SP */
@@ -284,7 +288,7 @@ r64_ret: ldd -0x10(%sp), %rp /* restore RP */ bv 0(%rp) nop -ENDPROC(real64_call_asm) +ENDPROC_CFI(real64_call_asm) #endif
@@ -293,12 +297,12 @@ ENDPROC(real64_call_asm) ** GCC 3.3 and later has a new function in libgcc.a for ** comparing function pointers. */ -ENTRY(__canonicalize_funcptr_for_compare) +ENTRY_CFI(__canonicalize_funcptr_for_compare) #ifdef CONFIG_64BIT bve (%r2) #else bv %r0(%r2) #endif copy %r26,%r28 -ENDPROC(__canonicalize_funcptr_for_compare) +ENDPROC_CFI(__canonicalize_funcptr_for_compare)
arch/parisc/lib/fixup.S +8 -8
@@ -65,34 +65,34 @@ .section .fixup, "ax" /* get_user() fixups, store -EFAULT in r8, and 0 in r9 */ -ENTRY(fixup_get_user_skip_1) +ENTRY_CFI(fixup_get_user_skip_1) get_fault_ip %r1,%r8 ldo 4(%r1), %r1 ldi -EFAULT, %r8 bv %r0(%r1) copy %r0, %r9 -ENDPROC(fixup_get_user_skip_1) +ENDPROC_CFI(fixup_get_user_skip_1) -ENTRY(fixup_get_user_skip_2) +ENTRY_CFI(fixup_get_user_skip_2) get_fault_ip %r1,%r8 ldo 8(%r1), %r1 ldi -EFAULT, %r8 bv %r0(%r1) copy %r0, %r9 -ENDPROC(fixup_get_user_skip_2) +ENDPROC_CFI(fixup_get_user_skip_2) /* put_user() fixups, store -EFAULT in r8 */ -ENTRY(fixup_put_user_skip_1) +ENTRY_CFI(fixup_put_user_skip_1) get_fault_ip %r1,%r8 ldo 4(%r1), %r1 bv %r0(%r1) ldi -EFAULT, %r8 -ENDPROC(fixup_put_user_skip_1) +ENDPROC_CFI(fixup_put_user_skip_1) -ENTRY(fixup_put_user_skip_2) +ENTRY_CFI(fixup_put_user_skip_2) get_fault_ip %r1,%r8 ldo 8(%r1), %r1 bv %r0(%r1) ldi -EFAULT, %r8 -ENDPROC(fixup_put_user_skip_2) +ENDPROC_CFI(fixup_put_user_skip_2)
arch/parisc/lib/lusercopy.S +4 -4
@@ -67,7 +67,7 @@ * otherwise, returns number of bytes not transferred. */ -ENTRY(lclear_user) +ENTRY_CFI(lclear_user) .proc .callinfo NO_CALLS .entry
@@ -81,7 +81,7 @@ $lclu_done: bv %r0(%r2) copy %r25,%r28 .exit -ENDPROC(lclear_user) +ENDPROC_CFI(lclear_user) .section .fixup,"ax" 2: fixup_branch $lclu_done
@@ -100,7 +100,7 @@ ENDPROC(lclear_user) * else strlen + 1 (i.e. includes zero byte). */ -ENTRY(lstrnlen_user) +ENTRY_CFI(lstrnlen_user) .proc .callinfo NO_CALLS .entry
@@ -120,7 +120,7 @@ $lslen_done: $lslen_nzero: b $lslen_done ldo 1(%r26),%r26 /* special case for N == 0 */ -ENDPROC(lstrnlen_user) +ENDPROC_CFI(lstrnlen_user) .section .fixup,"ax" 3: fixup_branch $lslen_done