Skip to contentSkip to conversation

4.7.8-stable review

PATCH In review Greg Kroah-Hartman 3 participants 32 messages Oct 14, 2016

Subsystems (6)
lore
Share & tools
lore

Greg Kroah-Hartman

author maintainer
#0 lore raw

cover 4.7.8-stable review

This is the start of the stable review cycle for the 4.7.8 release. There are 31 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sun Oct 16 12:27:05 UTC 2016. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.7.8-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.7.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 4.7.8-rc1

Jarkko Sakkinen <[email protected]>
tpm_crb: fix crb_req_canceled behavior

Jarkko Sakkinen <[email protected]>
tpm: fix a race condition in tpm2_unseal_trusted()

Miklos Szeredi <[email protected]>
ima: use file_dentry()

Christophe Jaillet <[email protected]>
ARM: cpuidle: Fix error return code

Linus Walleij <[email protected]>
ARM: dts: MSM8064 remove flags from SPMI/MPP IRQs

Grzegorz Jaszczyk <[email protected]>
ARM: dts: mvebu: armada-390: add missing compatibility string and bracket

Josh Poimboeuf <[email protected]>
x86/dumpstack: Fix x86_32 kernel_stack_pointer() previous stack access

Nicolas Iooss <[email protected]>
x86/mm/pkeys: Do not skip PKRU register if debug registers are not used

Prarit Bhargava <[email protected]>
arch/x86: Handle non enumerated CPU after physical hotplug

Denys Vlasenko <[email protected]>

    x86/apic: Get rid of apic_version[] array

Dave Hansen <[email protected]>
x86/pkeys: Make protection keys an "eager" feature

Mika Westerberg <[email protected]>
x86/irq: Prevent force migration of irqs which are not in the vector domain

Dan Williams <[email protected]>
x86/boot: Fix kdump, cleanup aborted E820_PRAM max_pfn manipulation

Mark Rutland <[email protected]>
arm64: fix dump_backtrace/unwind_frame with NULL tsk

Dan Carpenter <[email protected]>
KVM: PPC: BookE: Fix a sanity check

Christoffer Dall <[email protected]>
KVM: arm/arm64: vgic: Don't flush/sync without a working vgic

Christoffer Dall <[email protected]>
KVM: arm64: Require in-kernel irqchip for PMU support

James Hogan <[email protected]>
KVM: MIPS: Drop other CPU ASIDs on guest MMU changes

Thomas Huth <[email protected]>
KVM: PPC: Book3s PR: Allow access to unprivileged MMCR2 register

Boris Ostrovsky <[email protected]>
xen/x86: Update topology map for PV VCPUs

Uwe Kleine-König <[email protected]>
mfd: wm8350-i2c: Make sure the i2c regmap functions are compiled

Dan Carpenter <[email protected]>

    mfd: 88pm80x: Double shifting bug in suspend/resume

Boris Brezillon <[email protected]>
mfd: atmel-hlcdc: Do not sleep in atomic context

Lu Baolu <[email protected]>

    mfd: rtsx_usb: Avoid setting ucr->current_sg.status

Takashi Sakamoto <[email protected]>
ALSA: usb-line6: use the same declaration as definition in header for MIDI manufacturer ID

Anssi Hannula <[email protected]>
ALSA: usb-audio: Extend DragonFly dB scale quirk to cover other variants

Takashi Iwai <[email protected]>
ALSA: ali5451: Fix out-of-bound position reporting

Lu Baolu <[email protected]>
usb: dwc3: fix Clear Stall EP command failure

John Stultz <[email protected]>
timekeeping: Fix __ktime_get_fast_ns() regression

Andrew Donnellan <[email protected]>
cxl: use pcibios_free_controller_deferred() when removing vPHBs

Mauricio Faria de Oliveira <[email protected]>
powerpc/pseries: use pci_host_bridge.release_fn() to kfree(phb)

-------------

Diffstat:

 Documentation/virtual/kvm/devices/vcpu.txt |   4 +-
 Makefile                                   |   4 +-
 arch/arm/boot/dts/armada-390.dtsi          |   3 +
 arch/arm/boot/dts/qcom-apq8064.dtsi        |  76 ++++++++++++++++------
 arch/arm64/kernel/stacktrace.c             |   5 +-
 arch/arm64/kernel/traps.c                  |  10 +--
 arch/mips/kvm/emulate.c                    |  63 +++++++++++++++---
 arch/powerpc/include/asm/pci-bridge.h      |   1 +
 arch/powerpc/include/asm/reg.h             |   1 +
 arch/powerpc/kernel/pci-common.c           |  36 ++++++++++
 arch/powerpc/kvm/book3s_emulate.c          |   2 +
 arch/powerpc/kvm/booke.c                   |   2 +-
 arch/powerpc/platforms/pseries/pci.c       |   4 ++
 arch/powerpc/platforms/pseries/pci_dlpar.c |   7 +-
 arch/x86/include/asm/fpu/xstate.h          |   7 +-
 arch/x86/include/asm/mpspec.h              |   2 +-
 arch/x86/kernel/acpi/boot.c                |   2 +-
 arch/x86/kernel/apic/apic.c                |  17 ++---
 arch/x86/kernel/apic/io_apic.c             |   4 +-
 arch/x86/kernel/apic/probe_32.c            |   2 +-
 arch/x86/kernel/apic/vector.c              |  23 ++++++-
 arch/x86/kernel/e820.c                     |  14 ++--
 arch/x86/kernel/process_64.c               |  13 ++--
 arch/x86/kernel/ptrace.c                   |   4 +-
 arch/x86/kernel/smpboot.c                  |  28 +++++---
 arch/x86/xen/smp.c                         |   6 ++
 drivers/char/tpm/tpm-dev.c                 |   2 +-
 drivers/char/tpm/tpm-interface.c           |  51 ++++++++-------
 drivers/char/tpm/tpm-sysfs.c               |   2 +-
 drivers/char/tpm/tpm.h                     |  12 ++--
 drivers/char/tpm/tpm2-cmd.c                | 101 +++++++++++++++++++----------
 drivers/char/tpm/tpm_crb.c                 |   7 +-
 drivers/cpuidle/cpuidle-arm.c              |   1 +
 drivers/mfd/Kconfig                        |   1 +
 drivers/mfd/atmel-hlcdc.c                  |   5 +-
 drivers/mfd/rtsx_usb.c                     |  10 +--
 drivers/misc/cxl/vphb.c                    |  10 ++-
 drivers/pci/host-bridge.c                  |   1 +
 drivers/usb/dwc3/gadget.c                  |   3 +-
 include/linux/mfd/88pm80x.h                |   4 +-
 kernel/time/timekeeping.c                  |   7 +-
 security/integrity/ima/ima_appraise.c      |   4 +-
 security/integrity/ima/ima_main.c          |   2 +-
 sound/pci/ali5451/ali5451.c                |   2 +
 sound/usb/line6/driver.c                   |   2 +-
 sound/usb/mixer_quirks.c                   |  22 +++++--
 virt/kvm/arm/pmu.c                         |   8 +++
 virt/kvm/arm/vgic/vgic.c                   |   6 ++
 48 files changed, 426 insertions(+), 177 deletions(-)
author maintainer
#1 lore raw

PATCH 1/31 powerpc/pseries: use pci_host_bridge.release_fn() to kfree(phb)

4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mauricio Faria de Oliveira <[email protected]>

commit 2dd9c11b9d4dfbd6c070eab7b81197f65e82f1a0 upstream.

This patch leverages 'struct pci_host_bridge' from the PCI subsystem in order to free the pci_controller only after the last reference to its devices is dropped (avoiding an oops in pcibios_release_device() if the last reference is dropped after pcibios_free_controller()).

The patch relies on pci_host_bridge.release_fn() (and .release_data), which is called automatically by the PCI subsystem when the root bus is released (i.e., the last reference is dropped). Those fields are set via pci_set_host_bridge_release() (e.g. in the platform-specific implementation of pcibios_root_bridge_prepare()).

It introduces the 'pcibios_free_controller_deferred()' .release_fn() and it expects .release_data to hold a pointer to the pci_controller.

The function implictly calls 'pcibios_free_controller()', so an user must *NOT* explicitly call it if using the new _deferred() callback.

The functionality is enabled for pseries (although it isn't platform specific, and may be used by cxl).

Details on not-so-elegant design choices:

- Use 'pci_host_bridge.release_data' field as pointer to associated 'struct pci_controller' so *not* to 'pci_bus_to_host(bridge->bus)' in pcibios_free_controller_deferred().

That's because pci_remove_root_bus() sets 'host_bridge->bus = NULL' (so, if the last reference is released after pci_remove_root_bus() runs, which eventually reaches pcibios_free_controller_deferred(), that would hit a null pointer dereference).

The cxl/vphb.c code calls pci_remove_root_bus(), and the cxl folks are interested in this fix.

Test-case #1 (hold references)

  # ls -ld /sys/block/sd* | grep -m1 0021:01:00.0
  <...> /sys/block/sdaa -> ../devices/pci0021:01/0021:01:00.0/<...>
  # ls -ld /sys/block/sd* | grep -m1 0021:01:00.1
  <...> /sys/block/sdab -> ../devices/pci0021:01/0021:01:00.1/<...>
  # cat >/dev/sdaa & pid1=$!
  # cat >/dev/sdab & pid2=$!
  # drmgr -w 5 -d 1 -c phb -s 'PHB 33' -r
  Validating PHB DLPAR capability...yes.
  [  594.306719] pci_hp_remove_devices: PCI: Removing devices on bus 0021:01
  [  594.306738] pci_hp_remove_devices:    Removing 0021:01:00.0...
  ...
  [  598.236381] pci_hp_remove_devices:    Removing 0021:01:00.1...
  ...
  [  611.972077] pci_bus 0021:01: busn_res: [bus 01-ff] is released
  [  611.972140] rpadlpar_io: slot PHB 33 removed
  # kill -9 $pid1
  # kill -9 $pid2
  [  632.918088] pcibios_free_controller_deferred: domain 33, dynamic 1

Test-case #2 (don't hold references)

  # drmgr -w 5 -d 1 -c phb -s 'PHB 33' -r
  Validating PHB DLPAR capability...yes.
  [  916.357363] pci_hp_remove_devices: PCI: Removing devices on bus 0021:01
  [  916.357386] pci_hp_remove_devices:    Removing 0021:01:00.0...
  ...
  [  920.566527] pci_hp_remove_devices:    Removing 0021:01:00.1...
  ...
  [  933.955873] pci_bus 0021:01: busn_res: [bus 01-ff] is released
  [  933.955977] pcibios_free_controller_deferred: domain 33, dynamic 1
  [  933.955999] rpadlpar_io: slot PHB 33 removed
---
 arch/powerpc/include/asm/pci-bridge.h      |    1 
 arch/powerpc/kernel/pci-common.c           |   36 +++++++++++++++++++++++++++++
 arch/powerpc/platforms/pseries/pci.c       |    4 +++
 arch/powerpc/platforms/pseries/pci_dlpar.c |    7 ++++-
 4 files changed, 46 insertions(+), 2 deletions(-)
arch/powerpc/include/asm/pci-bridge.h +1 -0
@@ -299,6 +299,7 @@ extern void pci_process_bridge_OF_ranges
 /* Allocate & free a PCI host bridge structure */
 extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev);
 extern void pcibios_free_controller(struct pci_controller *phb);
+extern void pcibios_free_controller_deferred(struct pci_host_bridge *bridge);
 
 #ifdef CONFIG_PCI
 extern int pcibios_vaddr_is_ioport(void __iomem *address);
arch/powerpc/kernel/pci-common.c +36 -0
@@ -103,6 +103,42 @@ void pcibios_free_controller(struct pci_
 EXPORT_SYMBOL_GPL(pcibios_free_controller);
 
 /*
+ * This function is used to call pcibios_free_controller()
+ * in a deferred manner: a callback from the PCI subsystem.
+ *
+ * _*DO NOT*_ call pcibios_free_controller() explicitly if
+ * this is used (or it may access an invalid *phb pointer).
+ *
+ * The callback occurs when all references to the root bus
+ * are dropped (e.g., child buses/devices and their users).
+ *
+ * It's called as .release_fn() of 'struct pci_host_bridge'
+ * which is associated with the 'struct pci_controller.bus'
+ * (root bus) - it expects .release_data to hold a pointer
+ * to 'struct pci_controller'.
+ *
+ * In order to use it, register .release_fn()/release_data
+ * like this:
+ *
+ * pci_set_host_bridge_release(bridge,
+ *                             pcibios_free_controller_deferred
+ *                             (void *) phb);
+ *
+ * e.g. in the pcibios_root_bridge_prepare() callback from
+ * pci_create_root_bus().
+ */
+void pcibios_free_controller_deferred(struct pci_host_bridge *bridge)
+{
+	struct pci_controller *phb = (struct pci_controller *)
+					 bridge->release_data;
+
+	pr_debug("domain %d, dynamic %d\n", phb->global_number, phb->is_dynamic);
+
+	pcibios_free_controller(phb);
+}
+EXPORT_SYMBOL_GPL(pcibios_free_controller_deferred);
+
+/*
  * The function is used to return the minimal alignment
  * for memory or I/O windows of the associated P2P bridge.
  * By default, 4KiB alignment for I/O windows and 1MiB for
arch/powerpc/platforms/pseries/pci.c +4 -0
@@ -119,6 +119,10 @@ int pseries_root_bridge_prepare(struct p
 
 	bus = bridge->bus;
 
+	/* Rely on the pcibios_free_controller_deferred() callback. */
+	pci_set_host_bridge_release(bridge, pcibios_free_controller_deferred,
+					(void *) pci_bus_to_host(bus));
+
 	dn = pcibios_get_phb_of_node(bus);
 	if (!dn)
 		return 0;
arch/powerpc/platforms/pseries/pci_dlpar.c +5 -2
@@ -106,8 +106,11 @@ int remove_phb_dynamic(struct pci_contro
 		release_resource(res);
 	}
 
-	/* Free pci_controller data structure */
-	pcibios_free_controller(phb);
+	/*
+	 * The pci_controller data structure is freed by
+	 * the pcibios_free_controller_deferred() callback;
+	 * see pseries_root_bridge_prepare().
+	 */
 
 	return 0;
 }
author maintainer
#2 lore raw

PATCH 2/31 cxl: use pcibios_free_controller_deferred() when removing vPHBs

In reply to Greg Kroah-Hartman

4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andrew Donnellan <[email protected]>

commit 6f38a8b9a45833495dc878c335c5431cd98a16ed upstream.

When cxl removes a vPHB, it's possible that the pci_controller may be freed before all references to the devices on the vPHB have been released. This in turn causes an invalid memory access when the devices are eventually released, as pcibios_release_device() attempts to call the phb's release_device hook.

In cxl_pci_vphb_remove(), remove the existing call to pcibios_free_controller(). Instead, use pcibios_free_controller_deferred() to free the pci_controller after all devices have been released. Export pci_set_host_bridge_release() so we can do this.

---
 drivers/misc/cxl/vphb.c   |   10 +++++++++-
 drivers/pci/host-bridge.c |    1 +
 2 files changed, 10 insertions(+), 1 deletion(-)
drivers/misc/cxl/vphb.c +9 -1
@@ -243,6 +243,11 @@ int cxl_pci_vphb_add(struct cxl_afu *afu
 	if (phb->bus == NULL)
 		return -ENXIO;
 
+	/* Set release hook on root bus */
+	pci_set_host_bridge_release(to_pci_host_bridge(phb->bus->bridge),
+				    pcibios_free_controller_deferred,
+				    (void *) phb);
+
 	/* Claim resources. This might need some rework as well depending
 	 * whether we are doing probe-only or not, like assigning unassigned
 	 * resources etc...
@@ -269,7 +274,10 @@ void cxl_pci_vphb_remove(struct cxl_afu
 	afu->phb = NULL;
 
 	pci_remove_root_bus(phb->bus);
-	pcibios_free_controller(phb);
+	/*
+	 * We don't free phb here - that's handled by
+	 * pcibios_free_controller_deferred()
+	 */
 }
 
 bool cxl_pci_is_vphb_device(struct pci_dev *dev)
drivers/pci/host-bridge.c +1 -0
@@ -44,6 +44,7 @@ void pci_set_host_bridge_release(struct
 	bridge->release_fn = release_fn;
 	bridge->release_data = release_data;
 }
+EXPORT_SYMBOL_GPL(pci_set_host_bridge_release);
 
 void pcibios_resource_to_bus(struct pci_bus *bus, struct pci_bus_region *region,
 			     struct resource *res)
author maintainer
#3 lore raw

PATCH 3/31 timekeeping: Fix __ktime_get_fast_ns() regression

In reply to Greg Kroah-Hartman

4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: John Stultz <[email protected]>

commit 58bfea9532552d422bde7afa207e1a0f08dffa7d upstream.

In commit 27727df240c7 ("Avoid taking lock in NMI path with CONFIG_DEBUG_TIMEKEEPING"), I changed the logic to open-code the timekeeping_get_ns() function, but I forgot to include the unit conversion from cycles to nanoseconds, breaking the function's output, which impacts users like perf.

This results in bogus perf timestamps like:

 swapper     0 [000]   253.427536:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   254.426573:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   254.426687:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   254.426800:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   254.426905:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   254.427022:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   254.427127:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   254.427239:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   254.427346:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   254.427463:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   255.426572:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])

Instead of more reasonable expected timestamps like:

 swapper     0 [000]    39.953768:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    40.064839:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    40.175956:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    40.287103:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    40.398217:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    40.509324:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    40.620437:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    40.731546:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    40.842654:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    40.953772:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    41.064881:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])

Add the proper use of timekeeping_delta_to_ns() to convert the cycle delta to nanoseconds as needed.

Thanks to Brendan and Alexei for finding this quickly after the v4.8 release. Unfortunately the problematic commit has landed in some -stable trees so they'll need this fix as well.

Many apologies for this mistake. I'll be looking to add a perf-clock sanity test to the kselftest timers tests soon.

Fixes 27727df240c7 "timekeeping: Avoid taking lock in NMI path with CONFIG_DEBUG_TIMEKEEPING"
Cc Peter Zijlstra <[email protected]>
Cc Steven Rostedt <[email protected]>
Cc Mathieu Desnoyers <[email protected]>
---
 kernel/time/timekeeping.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
kernel/time/timekeeping.c +5 -2
@@ -403,8 +403,11 @@ static __always_inline u64 __ktime_get_f
 		tkr = tkf->base + (seq & 0x01);
 		now = ktime_to_ns(tkr->base);
 
-		now += clocksource_delta(tkr->read(tkr->clock),
-					 tkr->cycle_last, tkr->mask);
+		now += timekeeping_delta_to_ns(tkr,
+				clocksource_delta(
+					tkr->read(tkr->clock),
+					tkr->cycle_last,
+					tkr->mask));
 	} while (read_seqcount_retry(&tkf->seq, seq));
 
 	return now;
author maintainer
#4 lore raw

PATCH 4/31 usb: dwc3: fix Clear Stall EP command failure

In reply to Greg Kroah-Hartman

4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Lu Baolu <[email protected]>

commit 5e6c88d28ccbe72bedee1fbf4f9fea4764208598 upstream.

Commit 50c763f8c1bac ("usb: dwc3: Set the ClearPendIN bit on Clear Stall EP command") sets ClearPendIN bit for all IN endpoints of v2.60a+ cores. This causes ClearStall command fails on 2.60+ cores operating in HighSpeed mode.

In page 539 of 2.60a specification:

"When issuing Clear Stall command for IN endpoints in SuperSpeed mode, the software must set the "ClearPendIN" bit to '1' to clear any pending IN transcations, so that the device does not expect any ACK TP from the host for the data sent earlier."

It's obvious that we only need to apply this rule to those IN endpoints that currently operating in SuperSpeed mode.

Fixes 50c763f8c1bac ("usb: dwc3: Set the ClearPendIN bit on Clear Stall EP command")
---
 drivers/usb/dwc3/gadget.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/usb/dwc3/gadget.c +2 -1
@@ -363,7 +363,8 @@ static int dwc3_send_clear_stall_ep_cmd(
 	 * IN transfers due to a mishandled error condition. Synopsys
 	 * STAR 9000614252.
 	 */
-	if (dep->direction && (dwc->revision >= DWC3_REVISION_260A))
+	if (dep->direction && (dwc->revision >= DWC3_REVISION_260A) &&
+	    (dwc->gadget.speed >= USB_SPEED_SUPER))
 		cmd |= DWC3_DEPCMD_CLEARPENDIN;
 
 	memset(&params, 0, sizeof(params));
author maintainer
#5 lore raw

PATCH 5/31 ALSA: ali5451: Fix out-of-bound position reporting

In reply to Greg Kroah-Hartman

4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <[email protected]>

commit db68577966abc1aeae4ec597b3dcfa0d56e92041 upstream.

The pointer callbacks of ali5451 driver may return the value at the boundary occasionally, and it results in the kernel warning like
snd_ali5451 0000:00:06.0: BUG: , pos = 16384, buffer size = 16384, period size = 1024

It seems that folding the position offset is enough for fixing the warning and no ill-effect has been seen by that.

---
 sound/pci/ali5451/ali5451.c |    2 ++
 1 file changed, 2 insertions(+)
sound/pci/ali5451/ali5451.c +2 -0
@@ -1408,6 +1408,7 @@ snd_ali_playback_pointer(struct snd_pcm_
 	spin_unlock(&codec->reg_lock);
 	dev_dbg(codec->card->dev, "playback pointer returned cso=%xh.\n", cso);
 
+	cso %= runtime->buffer_size;
 	return cso;
 }
 
@@ -1428,6 +1429,7 @@ static snd_pcm_uframes_t snd_ali_pointer
 	cso = inw(ALI_REG(codec, ALI_CSO_ALPHA_FMS + 2));
 	spin_unlock(&codec->reg_lock);
 
+	cso %= runtime->buffer_size;
 	return cso;
 }
 
author maintainer
#6 lore raw

PATCH 6/31 ALSA: usb-audio: Extend DragonFly dB scale quirk to cover other variants

In reply to Greg Kroah-Hartman

4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Anssi Hannula <[email protected]>

commit eb1a74b7bea17eea31915c4f76385cefe69d9795 upstream.

The DragonFly quirk added in 42e3121d90f4 ("ALSA: usb-audio: Add a more accurate volume quirk for AudioQuest DragonFly") applies a custom dB map on the volume control when its range is reported as 0..50 (0 .. 0.2dB).

However, there exists at least one other variant (hw v1.0c, as opposed to the tested v1.2) which reports a different non-sensical volume range (0..53) and the custom map is therefore not applied for that device.

This results in all of the volume change appearing close to 100% on mixer UIs that utilize the dB TLV information.

Add a fallback case where no dB TLV is reported at all if the control range is not 0..50 but still 0..N where N <= 1000 (3.9 dB). Also restrict the quirk to only apply to the volume control as there is also a mute control which would match the check otherwise.

Fixes 42e3121d90f4 ("ALSA: usb-audio: Add a more accurate volume quirk for AudioQuest DragonFly")
---
 sound/usb/mixer_quirks.c |   22 ++++++++++++++++------
 1 file changed, 16 insertions(+), 6 deletions(-)
sound/usb/mixer_quirks.c +16 -6
@@ -1831,6 +1831,7 @@ void snd_usb_mixer_rc_memory_change(stru
 }
 
 static void snd_dragonfly_quirk_db_scale(struct usb_mixer_interface *mixer,
+					 struct usb_mixer_elem_info *cval,
 					 struct snd_kcontrol *kctl)
 {
 	/* Approximation using 10 ranges based on output measurement on hw v1.2.
@@ -1848,10 +1849,19 @@ static void snd_dragonfly_quirk_db_scale
 		41, 50, TLV_DB_MINMAX_ITEM(-441, 0),
 	);
 
-	usb_audio_info(mixer->chip, "applying DragonFly dB scale quirk\n");
-	kctl->tlv.p = scale;
-	kctl->vd[0].access |= SNDRV_CTL_ELEM_ACCESS_TLV_READ;
-	kctl->vd[0].access &= ~SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK;
+	if (cval->min == 0 && cval->max == 50) {
+		usb_audio_info(mixer->chip, "applying DragonFly dB scale quirk (0-50 variant)\n");
+		kctl->tlv.p = scale;
+		kctl->vd[0].access |= SNDRV_CTL_ELEM_ACCESS_TLV_READ;
+		kctl->vd[0].access &= ~SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK;
+
+	} else if (cval->min == 0 && cval->max <= 1000) {
+		/* Some other clearly broken DragonFly variant.
+		 * At least a 0..53 variant (hw v1.0) exists.
+		 */
+		usb_audio_info(mixer->chip, "ignoring too narrow dB range on a DragonFly device");
+		kctl->vd[0].access &= ~SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK;
+	}
 }
 
 void snd_usb_mixer_fu_apply_quirk(struct usb_mixer_interface *mixer,
@@ -1860,8 +1870,8 @@ void snd_usb_mixer_fu_apply_quirk(struct
 {
 	switch (mixer->chip->usb_id) {
 	case USB_ID(0x21b4, 0x0081): /* AudioQuest DragonFly */
-		if (unitid == 7 && cval->min == 0 && cval->max == 50)
-			snd_dragonfly_quirk_db_scale(mixer, kctl);
+		if (unitid == 7 && cval->control == UAC_FU_VOLUME)
+			snd_dragonfly_quirk_db_scale(mixer, cval, kctl);
 		break;
 	}
 }
author maintainer
#7 lore raw

PATCH 7/31 ALSA: usb-line6: use the same declaration as definition in header for MIDI manufacturer ID

In reply to Greg Kroah-Hartman

4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Takashi Sakamoto <[email protected]>

commit 8da08ca03b73593d5299893bf29fc08569c3fb5f upstream.

Currently, usb-line6 module exports an array of MIDI manufacturer ID and usb-pod module uses it. However, the declaration is not the definition in common header. The difference is explicit length of array. Although compiler calculates it and everything goes well, it's better to use the same representation between definition and declaration.

This commit fills the length of array for usb-line6 module. As a small good sub-effect, this commit suppress below warnings from static analysis by sparse v0.5.0.

sound/usb/line6/driver.c:274:43: error: cannot size expression sound/usb/line6/driver.c:275:16: error: cannot size expression sound/usb/line6/driver.c:276:16: error: cannot size expression sound/usb/line6/driver.c:277:16: error: cannot size expression

Fixes 705ececd1c60 ("Staging: add line6 usb driver")
---
 sound/usb/line6/driver.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
sound/usb/line6/driver.c +1 -1
@@ -29,7 +29,7 @@
 /*
 	This is Line 6's MIDI manufacturer ID.
 */
-const unsigned char line6_midi_id[] = {
+const unsigned char line6_midi_id[3] = {
 	0x00, 0x01, 0x0c
 };
 EXPORT_SYMBOL_GPL(line6_midi_id);
author maintainer
#8 lore raw

PATCH 8/31 mfd: rtsx_usb: Avoid setting ucr->current_sg.status

In reply to Greg Kroah-Hartman

4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Lu Baolu <[email protected]>

commit 8dcc5ff8fcaf778bb57ab4448fedca9e381d088f upstream.

Member "status" of struct usb_sg_request is managed by usb core. A spin lock is used to serialize the change of it. The driver could check the value of req->status, but should avoid changing it without the hold of the spinlock. Otherwise, it could cause race or error in usb core.

This patch could be backported to stable kernels with version later than v3.14.

---
 drivers/mfd/rtsx_usb.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/mfd/rtsx_usb.c +5 -5
@@ -46,9 +46,6 @@ static void rtsx_usb_sg_timed_out(unsign
 
 	dev_dbg(&ucr->pusb_intf->dev, "%s: sg transfer timed out", __func__);
 	usb_sg_cancel(&ucr->current_sg);
-
-	/* we know the cancellation is caused by time-out */
-	ucr->current_sg.status = -ETIMEDOUT;
 }
 
 static int rtsx_usb_bulk_transfer_sglist(struct rtsx_ucr *ucr,
@@ -67,12 +64,15 @@ static int rtsx_usb_bulk_transfer_sglist
 	ucr->sg_timer.expires = jiffies + msecs_to_jiffies(timeout);
 	add_timer(&ucr->sg_timer);
 	usb_sg_wait(&ucr->current_sg);
-	del_timer_sync(&ucr->sg_timer);
+	if (!del_timer_sync(&ucr->sg_timer))
+		ret = -ETIMEDOUT;
+	else
+		ret = ucr->current_sg.status;
 
 	if (act_len)
 		*act_len = ucr->current_sg.bytes;
 
-	return ucr->current_sg.status;
+	return ret;
 }
 
 int rtsx_usb_transfer_data(struct rtsx_ucr *ucr, unsigned int pipe,
author maintainer
#9 lore raw

PATCH 9/31 mfd: atmel-hlcdc: Do not sleep in atomic context

In reply to Greg Kroah-Hartman

4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Boris Brezillon <[email protected]>

commit 2c2469bc03d569c49119db2cccb5cb3f0c6a5b33 upstream.

readl_poll_timeout() calls usleep_range(), but regmap_atmel_hlcdc_reg_write() is called in atomic context (regmap spinlock held).

Replace the readl_poll_timeout() call by readl_poll_timeout_atomic().

Fixes ea31c0cf9b07 ("mfd: atmel-hlcdc: Implement config synchronization")
---
 drivers/mfd/atmel-hlcdc.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/mfd/atmel-hlcdc.c +3 -2
@@ -50,8 +50,9 @@ static int regmap_atmel_hlcdc_reg_write(
 	if (reg <= ATMEL_HLCDC_DIS) {
 		u32 status;
 
-		readl_poll_timeout(hregmap->regs + ATMEL_HLCDC_SR, status,
-				   !(status & ATMEL_HLCDC_SIP), 1, 100);
+		readl_poll_timeout_atomic(hregmap->regs + ATMEL_HLCDC_SR,
+					  status, !(status & ATMEL_HLCDC_SIP),
+					  1, 100);
 	}
 
 	writel(val, hregmap->regs + reg);
author maintainer
#10 lore raw

PATCH 10/31 mfd: 88pm80x: Double shifting bug in suspend/resume

In reply to Greg Kroah-Hartman

4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <[email protected]>

commit 9a6dc644512fd083400a96ac4a035ac154fe6b8d upstream.

set_bit() and clear_bit() take the bit number so this code is really doing "1 << (1 << irq)" which is a double shift bug. It's done consistently so it won't cause a problem unless "irq" is more than 4.

Fixes 70c6cce04066 ('mfd: Support 88pm80x in 80x driver')
---
 include/linux/mfd/88pm80x.h |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
include/linux/mfd/88pm80x.h +2 -2
@@ -350,7 +350,7 @@ static inline int pm80x_dev_suspend(stru
 	int irq = platform_get_irq(pdev, 0);
 
 	if (device_may_wakeup(dev))
-		set_bit((1 << irq), &chip->wu_flag);
+		set_bit(irq, &chip->wu_flag);
 
 	return 0;
 }
@@ -362,7 +362,7 @@ static inline int pm80x_dev_resume(struc
 	int irq = platform_get_irq(pdev, 0);
 
 	if (device_may_wakeup(dev))
-		clear_bit((1 << irq), &chip->wu_flag);
+		clear_bit(irq, &chip->wu_flag);
 
 	return 0;
 }
author maintainer
#11 lore raw

PATCH 12/31 xen/x86: Update topology map for PV VCPUs

In reply to Greg Kroah-Hartman

4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Boris Ostrovsky <[email protected]>

commit a6a198bc60e6c980a56eca24d33dc7f29139f8ea upstream.

Early during boot topology_update_package_map() computes logical_pkg_ids for all present processors.

Later, when processors are brought up, identify_cpu() updates these values based on phys_pkg_id which is a function of initial_apicid. On PV guests the latter may point to a non-existing node, causing logical_pkg_ids to be set to -1.

Intel's RAPL uses logical_pkg_id (as topology_logical_package_id()) to index its arrays and therefore in this case will point to index 65535 (since logical_pkg_id is a u16). This could lead to either a crash or may actually access random memory location.

As a workaround, we recompute topology during CPU bringup to reset logical_pkg_id to a valid value.

(The reason for initial_apicid being bogus is because it is initial_apicid of the processor from which the guest is launched. This value is CPUID(1).EBX[31:24])

---
 arch/x86/xen/smp.c |    6 ++++++
 1 file changed, 6 insertions(+)
arch/x86/xen/smp.c +6 -0
@@ -87,6 +87,12 @@ static void cpu_bringup(void)
 	cpu_data(cpu).x86_max_cores = 1;
 	set_cpu_sibling_map(cpu);
 
+	/*
+	 * identify_cpu() may have set logical_pkg_id to -1 due
+	 * to incorrect phys_proc_id. Let's re-comupte it.
+	 */
+	topology_update_package_map(apic->cpu_present_to_apicid(cpu), cpu);
+
 	xen_setup_cpu_clockevents();
 
 	notify_cpu_starting(cpu);
author maintainer
#12 lore raw

PATCH 13/31 KVM: PPC: Book3s PR: Allow access to unprivileged MMCR2 register

In reply to Greg Kroah-Hartman

4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Thomas Huth <[email protected]>

commit fa73c3b25bd8d0d393dc6109a1dba3c2aef0451e upstream.

The MMCR2 register is available twice, one time with number 785 (privileged access), and one time with number 769 (unprivileged, but it can be disabled completely). In former times, the Linux kernel was using the unprivileged register 769 only, but since commit 8dd75ccb571f3c92c ("powerpc: Use privileged SPR number for MMCR2"), it uses the privileged register 785 instead. The KVM-PR code then of course also switched to use the SPR 785, but this is causing older guest kernels to crash, since these kernels still access 769 instead. So to support older kernels with KVM-PR again, we have to support register 769 in KVM-PR, too.

Fixes 8dd75ccb571f3c92c48014b3dabd3d51a115ab41
---
 arch/powerpc/include/asm/reg.h    |    1 +
 arch/powerpc/kvm/book3s_emulate.c |    2 ++
 2 files changed, 3 insertions(+)
arch/powerpc/include/asm/reg.h +1 -0
@@ -718,6 +718,7 @@
 #define   MMCR0_FCHV	0x00000001UL /* freeze conditions in hypervisor mode */
 #define SPRN_MMCR1	798
 #define SPRN_MMCR2	785
+#define SPRN_UMMCR2	769
 #define SPRN_MMCRA	0x312
 #define   MMCRA_SDSYNC	0x80000000UL /* SDAR synced with SIAR */
 #define   MMCRA_SDAR_DCACHE_MISS 0x40000000UL
arch/powerpc/kvm/book3s_emulate.c +2 -0
@@ -498,6 +498,7 @@ int kvmppc_core_emulate_mtspr_pr(struct
 	case SPRN_MMCR0:
 	case SPRN_MMCR1:
 	case SPRN_MMCR2:
+	case SPRN_UMMCR2:
 #endif
 		break;
 unprivileged:
@@ -640,6 +641,7 @@ int kvmppc_core_emulate_mfspr_pr(struct
 	case SPRN_MMCR0:
 	case SPRN_MMCR1:
 	case SPRN_MMCR2:
+	case SPRN_UMMCR2:
 	case SPRN_TIR:
 #endif
 		*spr_val = 0;
author maintainer
#13 lore raw

PATCH 14/31 KVM: MIPS: Drop other CPU ASIDs on guest MMU changes

In reply to Greg Kroah-Hartman

4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: James Hogan <[email protected]>

commit 91e4f1b6073dd680d86cdb7e42d7cccca9db39d8 upstream.

When a guest TLB entry is replaced by TLBWI or TLBWR, we only invalidate TLB entries on the local CPU. This doesn't work correctly on an SMP host when the guest is migrated to a different physical CPU, as it could pick up stale TLB mappings from the last time the vCPU ran on that physical CPU.

Therefore invalidate both user and kernel host ASIDs on other CPUs, which will cause new ASIDs to be generated when it next runs on those CPUs.

We're careful only to do this if the TLB entry was already valid, and only for the kernel ASID where the virtual address it mapped is outside of the guest user address range.

---
 arch/mips/kvm/emulate.c |   63 ++++++++++++++++++++++++++++++++++++++++--------
 1 file changed, 53 insertions(+), 10 deletions(-)
arch/mips/kvm/emulate.c +53 -10
@@ -807,6 +807,47 @@ enum emulation_result kvm_mips_emul_tlbr
 	return EMULATE_FAIL;
 }
 
+/**
+ * kvm_mips_invalidate_guest_tlb() - Indicates a change in guest MMU map.
+ * @vcpu:	VCPU with changed mappings.
+ * @tlb:	TLB entry being removed.
+ *
+ * This is called to indicate a single change in guest MMU mappings, so that we
+ * can arrange TLB flushes on this and other CPUs.
+ */
+static void kvm_mips_invalidate_guest_tlb(struct kvm_vcpu *vcpu,
+					  struct kvm_mips_tlb *tlb)
+{
+	int cpu, i;
+	bool user;
+
+	/* No need to flush for entries which are already invalid */
+	if (!((tlb->tlb_lo[0] | tlb->tlb_lo[1]) & ENTRYLO_V))
+		return;
+	/* User address space doesn't need flushing for KSeg2/3 changes */
+	user = tlb->tlb_hi < KVM_GUEST_KSEG0;
+
+	preempt_disable();
+
+	/*
+	 * Probe the shadow host TLB for the entry being overwritten, if one
+	 * matches, invalidate it
+	 */
+	kvm_mips_host_tlb_inv(vcpu, tlb->tlb_hi);
+
+	/* Invalidate the whole ASID on other CPUs */
+	cpu = smp_processor_id();
+	for_each_possible_cpu(i) {
+		if (i == cpu)
+			continue;
+		if (user)
+			vcpu->arch.guest_user_asid[i] = 0;
+		vcpu->arch.guest_kernel_asid[i] = 0;
+	}
+
+	preempt_enable();
+}
+
 /* Write Guest TLB Entry @ Index */
 enum emulation_result kvm_mips_emul_tlbwi(struct kvm_vcpu *vcpu)
 {
@@ -826,11 +867,8 @@ enum emulation_result kvm_mips_emul_tlbw
 	}
 
 	tlb = &vcpu->arch.guest_tlb[index];
-	/*
-	 * Probe the shadow host TLB for the entry being overwritten, if one
-	 * matches, invalidate it
-	 */
-	kvm_mips_host_tlb_inv(vcpu, tlb->tlb_hi);
+
+	kvm_mips_invalidate_guest_tlb(vcpu, tlb);
 
 	tlb->tlb_mask = kvm_read_c0_guest_pagemask(cop0);
 	tlb->tlb_hi = kvm_read_c0_guest_entryhi(cop0);
@@ -859,11 +897,7 @@ enum emulation_result kvm_mips_emul_tlbw
 
 	tlb = &vcpu->arch.guest_tlb[index];
 
-	/*
-	 * Probe the shadow host TLB for the entry being overwritten, if one
-	 * matches, invalidate it
-	 */
-	kvm_mips_host_tlb_inv(vcpu, tlb->tlb_hi);
+	kvm_mips_invalidate_guest_tlb(vcpu, tlb);
 
 	tlb->tlb_mask = kvm_read_c0_guest_pagemask(cop0);
 	tlb->tlb_hi = kvm_read_c0_guest_entryhi(cop0);
@@ -982,6 +1016,7 @@ enum emulation_result kvm_mips_emulate_C
 	int32_t rt, rd, copz, sel, co_bit, op;
 	uint32_t pc = vcpu->arch.pc;
 	unsigned long curr_pc;
+	int cpu, i;
 
 	/*
 	 * Update PC and hold onto current PC in case there is
@@ -1089,8 +1124,16 @@ enum emulation_result kvm_mips_emulate_C
 						vcpu->arch.gprs[rt]
 						& KVM_ENTRYHI_ASID);
 
+					preempt_disable();
 					/* Blow away the shadow host TLBs */
 					kvm_mips_flush_host_tlb(1);
+					cpu = smp_processor_id();
+					for_each_possible_cpu(i)
+						if (i != cpu) {
+							vcpu->arch.guest_user_asid[i] = 0;
+							vcpu->arch.guest_kernel_asid[i] = 0;
+						}
+					preempt_enable();
 				}
 				kvm_write_c0_guest_entryhi(cop0,
 							   vcpu->arch.gprs[rt]);
author maintainer
#14 lore raw

PATCH 15/31 KVM: arm64: Require in-kernel irqchip for PMU support

In reply to Greg Kroah-Hartman

4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Christoffer Dall <[email protected]>

commit 6fe407f2d18a4f94216263f91cb7d1f08fa5887c upstream.

If userspace creates a PMU for the VCPU, but doesn't create an in-kernel irqchip, then we end up in a nasty path where we try to take an uninitialized spinlock, which can lead to all sorts of breakages.

Luckily, QEMU always creates the VGIC before the PMU, so we can establish this as ABI and check for the VGIC in the PMU init stage. This can be relaxed at a later time if we want to support PMU with a userspace irqchip.

---
 Documentation/virtual/kvm/devices/vcpu.txt |    4 +++-
 virt/kvm/arm/pmu.c                         |    8 ++++++++
 2 files changed, 11 insertions(+), 1 deletion(-)
Documentation/virtual/kvm/devices/vcpu.txt +3 -1
@@ -30,4 +30,6 @@ Returns: -ENODEV: PMUv3 not supported
                  attribute
          -EBUSY: PMUv3 already initialized
 
-Request the initialization of the PMUv3.
+Request the initialization of the PMUv3.  This must be done after creating the
+in-kernel irqchip.  Creating a PMU with a userspace irqchip is currently not
+supported.
virt/kvm/arm/pmu.c +8 -0
@@ -423,6 +423,14 @@ static int kvm_arm_pmu_v3_init(struct kv
 	if (!kvm_arm_support_pmu_v3())
 		return -ENODEV;
 
+	/*
+	 * We currently require an in-kernel VGIC to use the PMU emulation,
+	 * because we do not support forwarding PMU overflow interrupts to
+	 * userspace yet.
+	 */
+	if (!irqchip_in_kernel(vcpu->kvm) || !vgic_initialized(vcpu->kvm))
+		return -ENODEV;
+
 	if (!test_bit(KVM_ARM_VCPU_PMU_V3, vcpu->arch.features) ||
 	    !kvm_arm_pmu_irq_initialized(vcpu))
 		return -ENXIO;
author maintainer
#15 lore raw

PATCH 16/31 KVM: arm/arm64: vgic: Dont flush/sync without a working vgic

In reply to Greg Kroah-Hartman

4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Christoffer Dall <[email protected]>

commit 0099b7701f5296a758d9e6b945ec96f96847cc2f upstream.

If the vgic hasn't been created and initialized, we shouldn't attempt to look at its data structures or flush/sync anything to the GIC hardware.

This fixes an issue reported by Alexander Graf when using a userspace irqchip.

Fixes 0919e84c0fc1 ("KVM: arm/arm64: vgic-new: Add IRQ sync/flush framework")
---
 virt/kvm/arm/vgic/vgic.c |    6 ++++++
 1 file changed, 6 insertions(+)
virt/kvm/arm/vgic/vgic.c +6 -0
@@ -553,6 +553,9 @@ next:
 /* Sync back the hardware VGIC state into our emulation after a guest's run. */
 void kvm_vgic_sync_hwstate(struct kvm_vcpu *vcpu)
 {
+	if (unlikely(!vgic_initialized(vcpu->kvm)))
+		return;
+
 	vgic_process_maintenance_interrupt(vcpu);
 	vgic_fold_lr_state(vcpu);
 	vgic_prune_ap_list(vcpu);
@@ -561,6 +564,9 @@ void kvm_vgic_sync_hwstate(struct kvm_vc
 /* Flush our emulation state into the GIC hardware before entering the guest. */
 void kvm_vgic_flush_hwstate(struct kvm_vcpu *vcpu)
 {
+	if (unlikely(!vgic_initialized(vcpu->kvm)))
+		return;
+
 	spin_lock(&vcpu->arch.vgic_cpu.ap_list_lock);
 	vgic_flush_lr_state(vcpu);
 	spin_unlock(&vcpu->arch.vgic_cpu.ap_list_lock);
author maintainer
#16 lore raw

PATCH 17/31 KVM: PPC: BookE: Fix a sanity check

In reply to Greg Kroah-Hartman

4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <[email protected]>

commit ac0e89bb4744d3882ccd275f2416d9ce22f4e1e7 upstream.

We use logical negate where bitwise negate was intended. It means that we never return -EINVAL here.

Fixes ce11e48b7fdd ('KVM: PPC: E500: Add userspace debug stub support')
---
 arch/powerpc/kvm/booke.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/powerpc/kvm/booke.c +1 -1
@@ -2038,7 +2038,7 @@ int kvm_arch_vcpu_ioctl_set_guest_debug(
 		if (type == KVMPPC_DEBUG_NONE)
 			continue;
 
-		if (type & !(KVMPPC_DEBUG_WATCH_READ |
+		if (type & ~(KVMPPC_DEBUG_WATCH_READ |
 			     KVMPPC_DEBUG_WATCH_WRITE |
 			     KVMPPC_DEBUG_BREAKPOINT))
 			return -EINVAL;
author maintainer
#17 lore raw

PATCH 18/31 arm64: fix dump_backtrace/unwind_frame with NULL tsk

In reply to Greg Kroah-Hartman

4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mark Rutland <[email protected]>

commit b5e7307d9d5a340d2c9fabbe1cee137d4c682c71 upstream.

In some places, dump_backtrace() is called with a NULL tsk parameter, e.g. in bug_handler() in arch/arm64, or indirectly via show_stack() in core code. The expectation is that this is treated as if current were passed instead of NULL. Similar is true of unwind_frame().

Commit a80a0eb70c358f8c ("arm64: make irq_stack_ptr more robust") didn't take this into account. In dump_backtrace() it compares tsk against current *before* we check if tsk is NULL, and in unwind_frame() we never set tsk if it is NULL.

Due to this, we won't initialise irq_stack_ptr in either function. In dump_backtrace() this results in calling dump_mem() for memory immediately above the IRQ stack range, rather than for the relevant range on the task stack. In unwind_frame we'll reject unwinding frames on the IRQ stack.

In either case this results in incomplete or misleading backtrace information, but is not otherwise problematic. The initial percpu areas (including the IRQ stacks) are allocated in the linear map, and dump_mem uses __get_user(), so we shouldn't access anything with side-effects, and will handle holes safely.

This patch fixes the issue by having both functions handle the NULL tsk case before doing anything else with tsk.

Fixes a80a0eb70c358f8c ("arm64: make irq_stack_ptr more robust")
Cc Catalin Marinas <[email protected]>
Cc Will Deacon <[email protected]>
Cc Yang Shi <[email protected]>
---
 arch/arm64/kernel/stacktrace.c |    5 ++++-
 arch/arm64/kernel/traps.c      |   10 +++++-----
 2 files changed, 9 insertions(+), 6 deletions(-)
arch/arm64/kernel/stacktrace.c +4 -1
@@ -43,6 +43,9 @@ int notrace unwind_frame(struct task_str
 	unsigned long fp = frame->fp;
 	unsigned long irq_stack_ptr;
 
+	if (!tsk)
+		tsk = current;
+
 	/*
 	 * Switching between stacks is valid when tracing current and in
 	 * non-preemptible context.
@@ -67,7 +70,7 @@ int notrace unwind_frame(struct task_str
 	frame->pc = READ_ONCE_NOCHECK(*(unsigned long *)(fp + 8));
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	if (tsk && tsk->ret_stack &&
+	if (tsk->ret_stack &&
 			(frame->pc == (unsigned long)return_to_handler)) {
 		/*
 		 * This is a case where function graph tracer has
arch/arm64/kernel/traps.c +5 -5
@@ -149,6 +149,11 @@ static void dump_backtrace(struct pt_reg
 	unsigned long irq_stack_ptr;
 	int skip;
 
+	pr_debug("%s(regs = %p tsk = %p)\n", __func__, regs, tsk);
+
+	if (!tsk)
+		tsk = current;
+
 	/*
 	 * Switching between stacks is valid when tracing current and in
 	 * non-preemptible context.
@@ -158,11 +163,6 @@ static void dump_backtrace(struct pt_reg
 	else
 		irq_stack_ptr = 0;
 
-	pr_debug("%s(regs = %p tsk = %p)\n", __func__, regs, tsk);
-
-	if (!tsk)
-		tsk = current;
-
 	if (tsk == current) {
 		frame.fp = (unsigned long)__builtin_frame_address(0);
 		frame.sp = current_stack_pointer;
author maintainer
#18 lore raw

PATCH 19/31 x86/boot: Fix kdump, cleanup aborted E820_PRAM max_pfn manipulation

In reply to Greg Kroah-Hartman

4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dan Williams <[email protected]>

commit 917db484dc6a69969d317b3e57add4208a8d9d42 upstream.

In commit:

ec776ef6bbe1 ("x86/mm: Add support for the non-standard protected e820 type")

Christoph references the original patch I wrote implementing pmem support. The intent of the 'max_pfn' changes in that commit were to enable persistent memory ranges to be covered by the struct page memmap by default.

However, that approach was abandoned when Christoph ported the patches [1], and that functionality has since been replaced by devm_memremap_pages().

In the meantime, this max_pfn manipulation is confusing kdump [2] that assumes that everything covered by the max_pfn is "System RAM". This results in kdump hanging or crashing.

[1]: https://lists.01.org/pipermail/linux-nvdimm/2015-March/000348.html
[2]: https://bugzilla.redhat.com/show_bug.cgi?id=1351098

So fix it.

---
 arch/x86/kernel/e820.c |   14 +++++---------
 1 file changed, 5 insertions(+), 9 deletions(-)
arch/x86/kernel/e820.c +5 -9
@@ -348,7 +348,7 @@ int __init sanitize_e820_map(struct e820
 		 * continue building up new bios map based on this
 		 * information
 		 */
-		if (current_type != last_type || current_type == E820_PRAM) {
+		if (current_type != last_type) {
 			if (last_type != 0)	 {
 				new_bios[new_bios_entry].size =
 					change_point[chgidx]->addr - last_addr;
@@ -754,7 +754,7 @@ u64 __init early_reserve_e820(u64 size,
 /*
  * Find the highest page frame number we have available
  */
-static unsigned long __init e820_end_pfn(unsigned long limit_pfn)
+static unsigned long __init e820_end_pfn(unsigned long limit_pfn, unsigned type)
 {
 	int i;
 	unsigned long last_pfn = 0;
@@ -765,11 +765,7 @@ static unsigned long __init e820_end_pfn
 		unsigned long start_pfn;
 		unsigned long end_pfn;
 
-		/*
-		 * Persistent memory is accounted as ram for purposes of
-		 * establishing max_pfn and mem_map.
-		 */
-		if (ei->type != E820_RAM && ei->type != E820_PRAM)
+		if (ei->type != type)
 			continue;
 
 		start_pfn = ei->addr >> PAGE_SHIFT;
@@ -794,12 +790,12 @@ static unsigned long __init e820_end_pfn
 }
 unsigned long __init e820_end_of_ram_pfn(void)
 {
-	return e820_end_pfn(MAX_ARCH_PFN);
+	return e820_end_pfn(MAX_ARCH_PFN, E820_RAM);
 }
 
 unsigned long __init e820_end_of_low_ram_pfn(void)
 {
-	return e820_end_pfn(1UL << (32-PAGE_SHIFT));
+	return e820_end_pfn(1UL << (32 - PAGE_SHIFT), E820_RAM);
 }
 
 static void early_panic(char *msg)

_______________________________________________
Linux-nvdimm mailing list
[email protected]
https://lists.01.org/mailman/listinfo/linux-nvdimm

author maintainer
#19 lore raw

PATCH 20/31 x86/irq: Prevent force migration of irqs which are not in the vector domain

In reply to Greg Kroah-Hartman

4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mika Westerberg <[email protected]>

commit db91aa793ff984ac048e199ea1c54202543952fe upstream.

When a CPU is about to be offlined we call fixup_irqs() that resets IRQ affinities related to the CPU in question. The same thing is also done when the system is suspended to S-states like S3 (mem).

For each IRQ we try to complete any on-going move regardless whether the IRQ is actually part of x86_vector_domain. For each IRQ descriptor we fetch its chip_data, assume it is of type struct apic_chip_data and manipulate it by clearing old_domain mask etc. For irq_chips that are not part of the x86_vector_domain, like those created by various GPIO drivers, will find their chip_data being changed unexpectly.

Below is an example where GPIO chip owned by pinctrl-sunrisepoint.c gets corrupted after resume:

  # cat /sys/kernel/debug/gpio
  gpiochip0: GPIOs 360-511, parent: platform/INT344B:00, INT344B:00:
   gpio-511 (                    |sysfs               ) in  hi
  # rtcwake -s10 -mmem
  <10 seconds passes>
  # cat /sys/kernel/debug/gpio
  gpiochip0: GPIOs 360-511, parent: platform/INT344B:00, INT344B:00:
   gpio-511 (                    |sysfs               ) in  ?

Note '?' in the output. It means the struct gpio_chip ->get function is NULL whereas before suspend it was there.

Fix this by first checking that the IRQ belongs to x86_vector_domain before we try to use the chip_data as struct apic_chip_data.

---
 arch/x86/kernel/apic/vector.c |   23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)
arch/x86/kernel/apic/vector.c +20 -3
@@ -661,11 +661,28 @@ void irq_complete_move(struct irq_cfg *c
  */
 void irq_force_complete_move(struct irq_desc *desc)
 {
-	struct irq_data *irqdata = irq_desc_get_irq_data(desc);
-	struct apic_chip_data *data = apic_chip_data(irqdata);
-	struct irq_cfg *cfg = data ? &data->cfg : NULL;
+	struct irq_data *irqdata;
+	struct apic_chip_data *data;
+	struct irq_cfg *cfg;
 	unsigned int cpu;
 
+	/*
+	 * The function is called for all descriptors regardless of which
+	 * irqdomain they belong to. For example if an IRQ is provided by
+	 * an irq_chip as part of a GPIO driver, the chip data for that
+	 * descriptor is specific to the irq_chip in question.
+	 *
+	 * Check first that the chip_data is what we expect
+	 * (apic_chip_data) before touching it any further.
+	 */
+	irqdata = irq_domain_get_irq_data(x86_vector_domain,
+					  irq_desc_get_irq(desc));
+	if (!irqdata)
+		return;
+
+	data = apic_chip_data(irqdata);
+	cfg = data ? &data->cfg : NULL;
+
 	if (!cfg)
 		return;
 
author maintainer
#20 lore raw

PATCH 21/31 x86/pkeys: Make protection keys an "eager" feature

In reply to Greg Kroah-Hartman

4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dave Hansen <[email protected]>

commit d4b05923f579c234137317cdf9a5eb69ddab76d1 upstream.

Our XSAVE features are divided into two categories: those that generate FPU exceptions, and those that do not. MPX and pkeys do not generate FPU exceptions and thus can not be used lazily. We disable them when lazy mode is forced on.

We have a pair of masks to collect these two sets of features, but XFEATURE_MASK_PKRU was added to the wrong mask: XFEATURE_MASK_LAZY. Fix it by moving the feature to XFEATURE_MASK_EAGER.

Note: this only causes problem if you boot with lazy FPU mode (eagerfpu=off) which is *not* the default. It also only affects hardware which is not currently publicly available. It looks like eager mode is going away, but we still need this patch applied to any kernel that has protection keys and lazy mode, which is 4.6 through 4.8 at this point, and 4.9 if the lazy removal isn't sent to Linus for 4.9.

Fixes c8df40098451 ("x86/fpu, x86/mm/pkeys: Add PKRU xsave fields and data structures")
Cc Dave Hansen <[email protected]>
---
 arch/x86/include/asm/fpu/xstate.h |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
arch/x86/include/asm/fpu/xstate.h +4 -3
@@ -24,11 +24,12 @@
 				 XFEATURE_MASK_YMM | \
 				 XFEATURE_MASK_OPMASK | \
 				 XFEATURE_MASK_ZMM_Hi256 | \
-				 XFEATURE_MASK_Hi16_ZMM	 | \
-				 XFEATURE_MASK_PKRU)
+				 XFEATURE_MASK_Hi16_ZMM)
 
 /* Supported features which require eager state saving */
-#define XFEATURE_MASK_EAGER	(XFEATURE_MASK_BNDREGS | XFEATURE_MASK_BNDCSR)
+#define XFEATURE_MASK_EAGER	(XFEATURE_MASK_BNDREGS | \
+				 XFEATURE_MASK_BNDCSR | \
+				 XFEATURE_MASK_PKRU)
 
 /* All currently supported features */
 #define XCNTXT_MASK	(XFEATURE_MASK_LAZY | XFEATURE_MASK_EAGER)
author maintainer
#21 lore raw

PATCH 22/31 x86/apic: Get rid of apic_version[] array

In reply to Greg Kroah-Hartman

4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Denys Vlasenko <[email protected]>

commit cff9ab2b291e64259d97add48fe073c081afe4e2 upstream.

The array has a size of MAX_LOCAL_APIC, which can be as large as 32k, so it can consume up to 128k.

The array has been there forever and was never used for anything useful other than a version mismatch check which was introduced in 2009.

There is no reason to store the version in an array. The kernel is not prepared to handle different APIC versions anyway, so the real important part is to detect a version mismatch and warn about it, which can be done with a single variable as well.

[ tglx: Massaged changelog ]

---
 arch/x86/include/asm/mpspec.h   |    2 +-
 arch/x86/kernel/acpi/boot.c     |    2 +-
 arch/x86/kernel/apic/apic.c     |   17 +++++++----------
 arch/x86/kernel/apic/io_apic.c  |    4 ++--
 arch/x86/kernel/apic/probe_32.c |    2 +-
 arch/x86/kernel/smpboot.c       |   10 +++++-----
 6 files changed, 17 insertions(+), 20 deletions(-)
arch/x86/include/asm/mpspec.h +1 -1
@@ -6,7 +6,6 @@
 #include <asm/x86_init.h>
 #include <asm/apicdef.h>
 
-extern int apic_version[];
 extern int pic_mode;
 
 #ifdef CONFIG_X86_32
@@ -40,6 +39,7 @@ extern int mp_bus_id_to_type[MAX_MP_BUSS
 extern DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);
 
 extern unsigned int boot_cpu_physical_apicid;
+extern u8 boot_cpu_apic_version;
 extern unsigned long mp_lapic_addr;
 
 #ifdef CONFIG_X86_LOCAL_APIC
arch/x86/kernel/acpi/boot.c +1 -1
@@ -180,7 +180,7 @@ static int acpi_register_lapic(int id, u
 	}
 
 	if (boot_cpu_physical_apicid != -1U)
-		ver = apic_version[boot_cpu_physical_apicid];
+		ver = boot_cpu_apic_version;
 
 	return generic_processor_info(id, ver);
 }
arch/x86/kernel/apic/apic.c +7 -10
@@ -64,6 +64,8 @@ unsigned disabled_cpus;
 unsigned int boot_cpu_physical_apicid = -1U;
 EXPORT_SYMBOL_GPL(boot_cpu_physical_apicid);
 
+u8 boot_cpu_apic_version;
+
 /*
  * The highest APIC ID seen during enumeration.
  */
@@ -1790,8 +1792,7 @@ void __init init_apic_mappings(void)
 		 * since smp_sanity_check is prepared for such a case
 		 * and disable smp mode
 		 */
-		apic_version[new_apicid] =
-			 GET_APIC_VERSION(apic_read(APIC_LVR));
+		boot_cpu_apic_version = GET_APIC_VERSION(apic_read(APIC_LVR));
 	}
 }
 
@@ -1806,13 +1807,10 @@ void __init register_lapic_address(unsig
 	}
 	if (boot_cpu_physical_apicid == -1U) {
 		boot_cpu_physical_apicid  = read_apic_id();
-		apic_version[boot_cpu_physical_apicid] =
-			 GET_APIC_VERSION(apic_read(APIC_LVR));
+		boot_cpu_apic_version = GET_APIC_VERSION(apic_read(APIC_LVR));
 	}
 }
 
-int apic_version[MAX_LOCAL_APIC];
-
 /*
  * Local APIC interrupts
  */
@@ -2102,11 +2100,10 @@ int generic_processor_info(int apicid, i
 			   cpu, apicid);
 		version = 0x10;
 	}
-	apic_version[apicid] = version;
 
-	if (version != apic_version[boot_cpu_physical_apicid]) {
+	if (version != boot_cpu_apic_version) {
 		pr_warning("BIOS bug: APIC version mismatch, boot CPU: %x, CPU %d: version %x\n",
-			apic_version[boot_cpu_physical_apicid], cpu, version);
+			boot_cpu_apic_version, cpu, version);
 	}
 
 	physid_set(apicid, phys_cpu_present_map);
@@ -2249,7 +2246,7 @@ int __init APIC_init_uniprocessor(void)
 	 * Complain if the BIOS pretends there is one.
 	 */
 	if (!boot_cpu_has(X86_FEATURE_APIC) &&
-	    APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) {
+	    APIC_INTEGRATED(boot_cpu_apic_version)) {
 		pr_err("BIOS bug, local APIC 0x%x not detected!...\n",
 			boot_cpu_physical_apicid);
 		return -1;
arch/x86/kernel/apic/io_apic.c +2 -2
@@ -1592,7 +1592,7 @@ void __init setup_ioapic_ids_from_mpc(vo
 	 * no meaning without the serial APIC bus.
 	 */
 	if (!(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)
-		|| APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
+		|| APIC_XAPIC(boot_cpu_apic_version))
 		return;
 	setup_ioapic_ids_from_mpc_nocheck();
 }
@@ -2422,7 +2422,7 @@ static int io_apic_get_unique_id(int ioa
 static u8 io_apic_unique_id(int idx, u8 id)
 {
 	if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
-	    !APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
+	    !APIC_XAPIC(boot_cpu_apic_version))
 		return io_apic_get_unique_id(idx, id);
 	else
 		return id;
arch/x86/kernel/apic/probe_32.c +1 -1
@@ -153,7 +153,7 @@ early_param("apic", parse_apic);
 
 void __init default_setup_apic_routing(void)
 {
-	int version = apic_version[boot_cpu_physical_apicid];
+	int version = boot_cpu_apic_version;
 
 	if (num_possible_cpus() > 8) {
 		switch (boot_cpu_data.x86_vendor) {
arch/x86/kernel/smpboot.c +5 -5
@@ -676,7 +676,7 @@ wakeup_secondary_cpu_via_nmi(int apicid,
 	 * Give the other CPU some time to accept the IPI.
 	 */
 	udelay(200);
-	if (APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) {
+	if (APIC_INTEGRATED(boot_cpu_apic_version)) {
 		maxlvt = lapic_get_maxlvt();
 		if (maxlvt > 3)			/* Due to the Pentium erratum 3AP.  */
 			apic_write(APIC_ESR, 0);
@@ -703,7 +703,7 @@ wakeup_secondary_cpu_via_init(int phys_a
 	/*
 	 * Be paranoid about clearing APIC errors.
 	 */
-	if (APIC_INTEGRATED(apic_version[phys_apicid])) {
+	if (APIC_INTEGRATED(boot_cpu_apic_version)) {
 		if (maxlvt > 3)		/* Due to the Pentium erratum 3AP.  */
 			apic_write(APIC_ESR, 0);
 		apic_read(APIC_ESR);
@@ -742,7 +742,7 @@ wakeup_secondary_cpu_via_init(int phys_a
 	 * Determine this based on the APIC version.
 	 * If we don't have an integrated APIC, don't send the STARTUP IPIs.
 	 */
-	if (APIC_INTEGRATED(apic_version[phys_apicid]))
+	if (APIC_INTEGRATED(boot_cpu_apic_version))
 		num_starts = 2;
 	else
 		num_starts = 0;
@@ -980,7 +980,7 @@ static int do_boot_cpu(int apicid, int c
 		/*
 		 * Be paranoid about clearing APIC errors.
 		*/
-		if (APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) {
+		if (APIC_INTEGRATED(boot_cpu_apic_version)) {
 			apic_write(APIC_ESR, 0);
 			apic_read(APIC_ESR);
 		}
@@ -1235,7 +1235,7 @@ static int __init smp_sanity_check(unsig
 	/*
 	 * If we couldn't find a local APIC, then get out of here now!
 	 */
-	if (APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid]) &&
+	if (APIC_INTEGRATED(boot_cpu_apic_version) &&
 	    !boot_cpu_has(X86_FEATURE_APIC)) {
 		if (!disable_apic) {
 			pr_err("BIOS bug, local APIC #%d not detected!...\n",
author maintainer
#22 lore raw

PATCH 23/31 arch/x86: Handle non enumerated CPU after physical hotplug

In reply to Greg Kroah-Hartman

4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Prarit Bhargava <[email protected]>

commit 2a51fe083eba7f99cbda72f5ef90cdf2f4df882c upstream.

When a CPU is physically added to a system then the MADT table is not updated.

If subsequently a kdump kernel is started on that physically added CPU then the ACPI enumeration fails to provide the information for this CPU which is now the boot CPU of the kdump kernel.

As a consequence, generic_processor_info() is not invoked for that CPU so the number of enumerated processors is 0 and none of the initializations, including the logical package id management, are performed.

We have code which relies on the correctness of the logical package map and other information which is initialized via generic_processor_info(). Executing such code will result in undefined behaviour or kernel crashes.

This problem applies only to the kdump kernel because a normal kexec will switch to the original boot CPU, which is enumerated in MADT, before jumping into the kexec kernel.

The boot code already has a check for num_processors equal 0 in prefill_possible_map(). We can use that check as an indicator that the enumeration of the boot CPU did not happen and invoke generic_processor_info() for it. That initializes the relevant data for the boot CPU and therefore prevents subsequent failure.

[ tglx: Refined the code and rewrote the changelog ]

Fixes 1f12e32f4cd5 ("x86/topology: Create logical package id")
Cc Peter Zijlstra <[email protected]>
Cc Len Brown <[email protected]>
Cc Borislav Petkov <[email protected]>
Cc Andi Kleen <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Juergen Gross <[email protected]>
Cc Eric Biederman <[email protected]>
---
 arch/x86/kernel/smpboot.c |   18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)
arch/x86/kernel/smpboot.c +15 -3
@@ -1393,9 +1393,21 @@ __init void prefill_possible_map(void)
 {
 	int i, possible;
 
-	/* no processor from mptable or madt */
-	if (!num_processors)
-		num_processors = 1;
+	/* No boot processor was found in mptable or ACPI MADT */
+	if (!num_processors) {
+		int apicid = boot_cpu_physical_apicid;
+		int cpu = hard_smp_processor_id();
+
+		pr_warn("Boot CPU (id %d) not listed by BIOS\n", cpu);
+
+		/* Make sure boot cpu is enumerated */
+		if (apic->cpu_present_to_apicid(0) == BAD_APICID &&
+		    apic->apic_id_valid(apicid))
+			generic_processor_info(apicid, boot_cpu_apic_version);
+
+		if (!num_processors)
+			num_processors = 1;
+	}
 
 	i = setup_max_cpus ?: 1;
 	if (setup_possible_cpus == -1) {
author maintainer
#23 lore raw

PATCH 24/31 x86/mm/pkeys: Do not skip PKRU register if debug registers are not used

In reply to Greg Kroah-Hartman

4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Nicolas Iooss <[email protected]>

commit ba6d018e3d2f6a0fad58a668cadf66b2d1f80f59 upstream.

__show_regs() fails to dump the PKRU state when the debug registers are in their default state because there is a return statement on the debug register state.

Change the logic to report PKRU value even when debug registers are in their default state.

Fixes c0b17b5bd4b7 ("x86/mm/pkeys: Dump PKRU with other kernel registers")
---
 arch/x86/kernel/process_64.c |   13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)
arch/x86/kernel/process_64.c +7 -6
@@ -110,12 +110,13 @@ void __show_regs(struct pt_regs *regs, i
 	get_debugreg(d7, 7);
 
 	/* Only print out debug registers if they are in their non-default state. */
-	if ((d0 == 0) && (d1 == 0) && (d2 == 0) && (d3 == 0) &&
-	    (d6 == DR6_RESERVED) && (d7 == 0x400))
-		return;
-
-	printk(KERN_DEFAULT "DR0: %016lx DR1: %016lx DR2: %016lx\n", d0, d1, d2);
-	printk(KERN_DEFAULT "DR3: %016lx DR6: %016lx DR7: %016lx\n", d3, d6, d7);
+	if (!((d0 == 0) && (d1 == 0) && (d2 == 0) && (d3 == 0) &&
+	    (d6 == DR6_RESERVED) && (d7 == 0x400))) {
+		printk(KERN_DEFAULT "DR0: %016lx DR1: %016lx DR2: %016lx\n",
+		       d0, d1, d2);
+		printk(KERN_DEFAULT "DR3: %016lx DR6: %016lx DR7: %016lx\n",
+		       d3, d6, d7);
+	}
 
 	if (boot_cpu_has(X86_FEATURE_OSPKE))
 		printk(KERN_DEFAULT "PKRU: %08x\n", read_pkru());
author maintainer
#24 lore raw

PATCH 25/31 x86/dumpstack: Fix x86_32 kernel_stack_pointer() previous stack access

In reply to Greg Kroah-Hartman

4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Josh Poimboeuf <[email protected]>

commit 72b4f6a5e903b071f2a7c4eb1418cbe4eefdc344 upstream.

On x86_32, when an interrupt happens from kernel space, SS and SP aren't pushed and the existing stack is used. So pt_regs is effectively two words shorter, and the previous stack pointer is normally the memory after the shortened pt_regs, aka '&regs->sp'.

But in the rare case where the interrupt hits right after the stack pointer has been changed to point to an empty stack, like for example when call_on_stack() is used, the address immediately after the shortened pt_regs is no longer on the stack. In that case, instead of '&regs->sp', the previous stack pointer should be retrieved from the beginning of the current stack page.

kernel_stack_pointer() wants to do that, but it forgets to dereference the pointer. So instead of returning a pointer to the previous stack, it returns a pointer to the beginning of the current stack.

Note that it's probably outside of kernel_stack_pointer()'s scope to be switching stacks at all. The x86_64 version of this function doesn't do it, and it would be better for the caller to do it if necessary. But that's a patch for another day. This just fixes the original intent.

Cc Andy Lutomirski <[email protected]>
Cc Andy Lutomirski <[email protected]>
Cc Borislav Petkov <[email protected]>
Cc Brian Gerst <[email protected]>
Cc Byungchul Park <[email protected]>
Cc Denys Vlasenko <[email protected]>
Cc Frederic Weisbecker <[email protected]>
Cc H. Peter Anvin <[email protected]>
Cc Kees Cook <[email protected]>
Cc Linus Torvalds <[email protected]>
Cc Nilay Vaish <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Steven Rostedt <[email protected]>
Cc Thomas Gleixner <[email protected]>
Fixes 0788aa6a23cb ("x86: Prepare removal of previous_esp from i386 thread_info structure")
---
 arch/x86/kernel/ptrace.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/x86/kernel/ptrace.c +2 -2
@@ -173,8 +173,8 @@ unsigned long kernel_stack_pointer(struc
 		return sp;
 
 	prev_esp = (u32 *)(context);
-	if (prev_esp)
-		return (unsigned long)prev_esp;
+	if (*prev_esp)
+		return (unsigned long)*prev_esp;
 
 	return (unsigned long)regs;
 }
author maintainer
#25 lore raw

PATCH 26/31 ARM: dts: mvebu: armada-390: add missing compatibility string and bracket

In reply to Greg Kroah-Hartman

4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Grzegorz Jaszczyk <[email protected]>

commit 061492cfad9f11dbc32df741a7164f307b69b6e6 upstream.

The armada-390.dtsi was broken since the first patch which adds Device Tree files for Armada 39x SoC was introduced.

Fixes 538da83 ("ARM: mvebu: add Device Tree files for Armada 39x SoC and board")

---
 arch/arm/boot/dts/armada-390.dtsi |    3 +++
 1 file changed, 3 insertions(+)
arch/arm/boot/dts/armada-390.dtsi +3 -0
@@ -47,6 +47,8 @@
 #include "armada-39x.dtsi"
 
 / {
+	compatible = "marvell,armada390";
+
 	soc {
 		internal-regs {
 			pinctrl@18000 {
@@ -54,4 +56,5 @@
 				reg = <0x18000 0x20>;
 			};
 		};
+	};
 };
author maintainer
#26 lore raw

PATCH 28/31 ARM: cpuidle: Fix error return code

In reply to Greg Kroah-Hartman

4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Christophe Jaillet <[email protected]>

commit af48d7bc3756a0cd882d65bff14ab39746ba57fe upstream.

We know that 'ret = 0' because it has been tested a few lines above. So, if 'kzalloc' fails, 0 will be returned instead of an error code. Return -ENOMEM instead.

Fixes a0d46a3dfdc3 ("ARM: cpuidle: Register per cpuidle device")
---
 drivers/cpuidle/cpuidle-arm.c |    1 +
 1 file changed, 1 insertion(+)
drivers/cpuidle/cpuidle-arm.c +1 -0
@@ -135,6 +135,7 @@ static int __init arm_idle_init(void)
 		dev = kzalloc(sizeof(*dev), GFP_KERNEL);
 		if (!dev) {
 			pr_err("Failed to allocate cpuidle device\n");
+			ret = -ENOMEM;
 			goto out_fail;
 		}
 		dev->cpu = cpu;
author maintainer
#27 lore raw

PATCH 29/31 ima: use file_dentry()

In reply to Greg Kroah-Hartman

4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Miklos Szeredi <[email protected]>

commit e71b9dff0634edb127f449e076e883ef24a8c76c upstream.

Ima tries to call ->setxattr() on overlayfs dentry after having locked underlying inode, which results in a deadlock.

Fixes 4bacc9c9234c ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay")
Cc Mimi Zohar <[email protected]>
---
 security/integrity/ima/ima_appraise.c |    4 ++--
 security/integrity/ima/ima_main.c     |    2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)
security/integrity/ima/ima_appraise.c +2 -2
@@ -190,7 +190,7 @@ int ima_appraise_measurement(enum ima_ho
 {
 	static const char op[] = "appraise_data";
 	char *cause = "unknown";
-	struct dentry *dentry = file->f_path.dentry;
+	struct dentry *dentry = file_dentry(file);
 	struct inode *inode = d_backing_inode(dentry);
 	enum integrity_status status = INTEGRITY_UNKNOWN;
 	int rc = xattr_len, hash_start = 0;
@@ -295,7 +295,7 @@ out:
  */
 void ima_update_xattr(struct integrity_iint_cache *iint, struct file *file)
 {
-	struct dentry *dentry = file->f_path.dentry;
+	struct dentry *dentry = file_dentry(file);
 	int rc = 0;
 
 	/* do not collect and update hash for digital signatures */
security/integrity/ima/ima_main.c +1 -1
@@ -222,7 +222,7 @@ static int process_measurement(struct fi
 	if ((action & IMA_APPRAISE_SUBMASK) ||
 		    strcmp(template_desc->name, IMA_TEMPLATE_IMA_NAME) != 0)
 		/* read 'security.ima' */
-		xattr_len = ima_read_xattr(file->f_path.dentry, &xattr_value);
+		xattr_len = ima_read_xattr(file_dentry(file), &xattr_value);
 
 	hash_algo = ima_get_hash_algo(xattr_value, xattr_len);
 
author maintainer
#28 lore raw

PATCH 30/31 tpm: fix a race condition in tpm2_unseal_trusted()

In reply to Greg Kroah-Hartman

4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jarkko Sakkinen <[email protected]>

commit d4816edfe706497a8525480c1685ceb9871bc118 upstream.

Unseal and load operations should be done as an atomic operation. This commit introduces unlocked tpm_transmit() so that tpm2_unseal_trusted() can do the locking by itself.

Fixes 0fe5480303a1 ("keys, trusted: seal/unseal with TPM 2.0 chips")
---
 drivers/char/tpm/tpm-dev.c       |    2 
 drivers/char/tpm/tpm-interface.c |   51 ++++++++++---------
 drivers/char/tpm/tpm-sysfs.c     |    2 
 drivers/char/tpm/tpm.h           |   12 +++-
 drivers/char/tpm/tpm2-cmd.c      |  101 +++++++++++++++++++++++++--------------
 5 files changed, 103 insertions(+), 65 deletions(-)
drivers/char/tpm/tpm-dev.c +1 -1
@@ -139,7 +139,7 @@ static ssize_t tpm_write(struct file *fi
 
 	/* atomic tpm command send and result receive */
 	out_size = tpm_transmit(priv->chip, priv->data_buffer,
-				sizeof(priv->data_buffer));
+				sizeof(priv->data_buffer), 0);
 	if (out_size < 0) {
 		mutex_unlock(&priv->buffer_mutex);
 		return out_size;
drivers/char/tpm/tpm-interface.c +28 -23

162 lines not on this page · raw message

drivers/char/tpm/tpm-sysfs.c +1 -1
@@ -39,7 +39,7 @@ static ssize_t pubek_show(struct device
 	struct tpm_chip *chip = dev_get_drvdata(dev);
 
 	tpm_cmd.header.in = tpm_readpubek_header;
-	err = tpm_transmit_cmd(chip, &tpm_cmd, READ_PUBEK_RESULT_SIZE,
+	err = tpm_transmit_cmd(chip, &tpm_cmd, READ_PUBEK_RESULT_SIZE, 0,
 			       "attempting to read the PUBEK");
 	if (err)
 		goto out;
drivers/char/tpm/tpm.h +8 -4
@@ -494,11 +494,15 @@ extern struct class *tpm_class;
 extern dev_t tpm_devt;
 extern const struct file_operations tpm_fops;
 
+enum tpm_transmit_flags {
+	TPM_TRANSMIT_UNLOCKED	= BIT(0),
+};
+
+ssize_t tpm_transmit(struct tpm_chip *chip, const u8 *buf, size_t bufsiz,
+		     unsigned int flags);
+ssize_t tpm_transmit_cmd(struct tpm_chip *chip, const void *cmd, int len,
+			 unsigned int flags, const char *desc);
 ssize_t	tpm_getcap(struct device *, __be32, cap_t *, const char *);
-ssize_t tpm_transmit(struct tpm_chip *chip, const char *buf,
-		     size_t bufsiz);
-ssize_t tpm_transmit_cmd(struct tpm_chip *chip, void *cmd, int len,
-			 const char *desc);
 extern int tpm_get_timeouts(struct tpm_chip *);
 extern void tpm_gen_interrupt(struct tpm_chip *);
 extern int tpm_do_selftest(struct tpm_chip *);
drivers/char/tpm/tpm2-cmd.c +65 -36

221 lines not on this page · raw message

author maintainer
#29 lore raw

PATCH 31/31 tpm_crb: fix crb_req_canceled behavior

In reply to Greg Kroah-Hartman

4.7-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jarkko Sakkinen <[email protected]>

commit 72fd50e14e46dc0edf360631bdece87c2f066a97 upstream.

The req_canceled() callback is used by tpm_transmit() periodically to check whether the request has been canceled while it is receiving a response from the TPM.

The TPM_CRB_CTRL_CANCEL register was cleared already in the crb_cancel callback, which has two consequences:

* Cancel might not happen.
* req_canceled() always returns zero.

A better place to clear the register is when starting to send a new command. The behavior of TPM_CRB_CTRL_CANCEL is described in the section 5.5.3.6 of the PTP specification.

Fixes 30fc8d138e91 ("tpm: TPM 2.0 CRB Interface")
---
 drivers/char/tpm/tpm_crb.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/char/tpm/tpm_crb.c +5 -2
@@ -142,6 +142,11 @@ static int crb_send(struct tpm_chip *chi
 	struct crb_priv *priv = chip->vendor.priv;
 	int rc = 0;
 
+	/* Zero the cancel register so that the next command will not get
+	 * canceled.
+	 */
+	iowrite32(0, &priv->cca->cancel);
+
 	if (len > ioread32(&priv->cca->cmd_size)) {
 		dev_err(&chip->dev,
 			"invalid command count value %x %zx\n",
@@ -175,8 +180,6 @@ static void crb_cancel(struct tpm_chip *
 
 	if ((priv->flags & CRB_FL_ACPI_START) && crb_do_acpi_start(chip))
 		dev_err(&chip->dev, "ACPI Start failed\n");
-
-	iowrite32(0, &priv->cca->cancel);
 }
 
 static bool crb_req_canceled(struct tpm_chip *chip, u8 status)
#30 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.7.8 release. There are 31 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sun Oct 16 12:27:05 UTC 2016. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 9 lines
	kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.7.8-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.7.y
and the diffstat can be found below.

thanks,

greg k-h

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Signature · 5 lines
Shuah Khan
Sr. Linux Kernel Developer
Open Source Innovation Group
Samsung Research America(Silicon Valley)
[email protected]
#31 lore raw
In reply to Greg Kroah-Hartman
Quoted 8 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.7.8 release. There are 31 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sun Oct 16 12:27:05 UTC 2016. Anything received after that time might be too late.

Build results:

	total: 149 pass: 149 fail: 0
Qemu test results:
	total: 110 pass: 110 fail: 0

Details are available at http://kerneltests.org/builders.

Guenter