Skip to contentSkip to conversation

OMAP3: omap3_logic: Remove LCD preboot info

PATCH New Adam Ford 2 participants 3 messages Oct 15, 2016 – Nov 2, 2016

lore
Share & tools
lore

Adam Ford

author
#0 lore raw

PATCH v2 1/1 OMAP3: omap3_logic: Remove LCD preboot info

The LCD isn't supported in U-Boot and the LCD is now configured in the device tree, so this code is pointless.

V2: Eliminiate erroneous newline.

Signed-off-by Adam Ford <[email protected]>
include/configs/omap3_logic.h +0 -20
index a7649ca..95ff5c3 100644
@@ -128,27 +128,7 @@
 
 /* Environment information */
 
-/*
- * PREBOOT assumes the 4.3" display is attached.  User can interrupt
- * and modify display variable to suit their needs.
- */
 #define CONFIG_PREBOOT \
-	"echo ======================NOTICE============================;"\
-	"echo \"The u-boot environment is not set.\";"			\
-	"echo \"If using a display a valid display variable for your panel\";" \
-	"echo \"needs to be set.\";"					\
-	"echo \"Valid display options are:\";"				\
-	"echo \"  2 == LQ121S1DG31     TFT SVGA    (12.1)  Sharp\";"	\
-	"echo \"  3 == LQ036Q1DA01     TFT QVGA    (3.6)   Sharp w/ASIC\";" \
-	"echo \"  5 == LQ064D343       TFT VGA     (6.4)   Sharp\";"	\
-	"echo \"  7 == LQ10D368        TFT VGA     (10.4)  Sharp\";"	\
-	"echo \" 15 == LQ043T1DG01     TFT WQVGA   (4.3)   Sharp (DEFAULT)\";" \
-	"echo \" vga[-dvi or -hdmi]    LCD VGA     640x480\";"          \
-	"echo \" svga[-dvi or -hdmi]   LCD SVGA    800x600\";"          \
-	"echo \" xga[-dvi or -hdmi]    LCD XGA     1024x768\";"         \
-	"echo \" 720p[-dvi or -hdmi]   LCD 720P    1280x720\";"         \
-	"echo \"Defaulting to 4.3 LCD panel (display=15).\";"		\
-	"setenv display 15;"						\
 	"setenv preboot;"						\
 	"nand unlock;"							\
 	"saveenv;"
Signature · 1 line
2.7.4
#1 lore raw

PATCH v2 1/1 OMAP3: omap3_logic: Remove LCD preboot info

include/configs/omap3_logic.h

Quoted 9 lines · Adam Ford

The LCD isn't supported in U-Boot and the LCD is now configured in the device tree, so this code is pointless.

V2: Eliminiate erroneous newline.

Signed-off-by Adam Ford <[email protected]>
include/configs/omap3_logic.h +0 -0
index a7649ca..95ff5c3 100644
Reviewed-by Tom Rini <[email protected]>
Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20161015/b755c789/attachment.sig>
#2 lore raw

PATCH v2 1/1 OMAP3: omap3_logic: Remove LCD preboot info

In reply to Adam Ford

include/configs/omap3_logic.h

Quoted 10 lines · Adam Ford

The LCD isn't supported in U-Boot and the LCD is now configured in the device tree, so this code is pointless.

V2: Eliminiate erroneous newline.

Signed-off-by Adam Ford <[email protected]>
Reviewed-by Tom Rini <[email protected]>
include/configs/omap3_logic.h +0 -0
index a7649ca..95ff5c3 100644

Applied to u-boot/master (before v2016.11-rc3), thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20161102/69fb6ca7/attachment.sig>