Skip to contentSkip to conversation

package/wireshark: fix kconfig depndencies

RFC PATCH New Yann E. MORIN 3 participants 4 messages Oct 20, 2016

lore
Share & tools
lore

Yann E. MORIN

author
#0 lore raw

RFC PATCH 1/1 package/wireshark: fix kconfig depndencies

Commit fa6feff (wireshark: needs the qt5tools lrelease utility) introduced a circular dependency chain in Kconfig:

package/qt5/qt5base/Config.in:118:error: recursive dependency detected!
package/qt5/qt5base/Config.in:118: symbol BR2_PACKAGE_QT5BASE_GUI is selected by BR2_PACKAGE_QT5TOOLS_PIXELTOOL
package/qt5/qt5tools/Config.in:19: symbol BR2_PACKAGE_QT5TOOLS_PIXELTOOL depends on BR2_PACKAGE_QT5TOOLS
package/qt5/qt5tools/Config.in:1: symbol BR2_PACKAGE_QT5TOOLS is selected by BR2_PACKAGE_QT5BASE_WIDGETS
package/qt5/qt5base/Config.in:131: symbol BR2_PACKAGE_QT5BASE_WIDGETS is selected by BR2_PACKAGE_QT5X11EXTRAS
package/qt5/qt5x11extras/Config.in:1: symbol BR2_PACKAGE_QT5X11EXTRAS depends on BR2_PACKAGE_QT5BASE_XCB
package/qt5/qt5base/Config.in:186: symbol BR2_PACKAGE_QT5BASE_XCB depends on BR2_PACKAGE_QT5BASE_GUI

Fix that by dropping the select on the Qt5Tools, and introduce an intermediate kconfig-level variable to represent the new condition, to simplify the .mk file.

That would make the condition for enabling/disabling the GUI to be a little bit more complex by adding yet another (long-ish) variable.

So we also introduce an intermediate kconfig-level variable that represent the condition to enable the GUI.

Reported-by Thomas Petazzoni <[email protected]>
Signed-off-by "Yann E. MORIN" <[email protected]>
Cc Thomas Petazzoni <[email protected]>
Cc Baruch Siach <[email protected]>

---
Note: UNTESTED. It does fix the Kconfig issue, but it is otherwise not even build-tested. Baruch? ;-)

---
 package/wireshark/Config.in    | 15 +++++++++++++--
 package/wireshark/wireshark.mk |  4 ++--
 2 files changed, 15 insertions(+), 4 deletions(-)
package/wireshark/Config.in +13 -2
index 959fb5b..b5a874b 100644
@@ -2,8 +2,6 @@ config BR2_PACKAGE_WIRESHARK
 	bool "wireshark"
 	select BR2_PACKAGE_LIBPCAP
 	select BR2_PACKAGE_LIBGLIB2
-	select BR2_PACKAGE_QT5TOOLS if BR2_PACKAGE_QT5BASE_WIDGETS
-	select BR2_PACKAGE_QT5TOOLS_LINGUIST_TOOLS if BR2_PACKAGE_QT5BASE_WIDGETS
 	depends on BR2_USE_MMU # fork(), glib2
 	depends on BR2_USE_WCHAR # glib2
 	depends on BR2_TOOLCHAIN_HAS_THREADS # glib2

@@ -12,6 +10,19 @@ config BR2_PACKAGE_WIRESHARK
 
 	  https://www.wireshark.org
 
+config BR2_PACKAGE_WIRESHARK_QT
+	bool
+	default y
+	depends on BR2_PACKAGE_QT5BASE_WIDGETS
+	depends on BR2_PACKAGE_QT5TOOLS
+	select BR2_PACKAGE_QT5TOOLS_LINGUIST_TOOLS
+
+config BR2_PACKAGE_WIRESHARK_GUI
+	bool
+	default y if BR2_PACKAGE_LIBGTK2
+	default y if BR2_PACKAGE_LIBGTK3
+	default y if BR2_PACKAGE_WIRESHARK_QT
+
 comment "wireshark needs a toolchain w/ wchar, threads"
 	depends on BR2_USE_MMU
 	depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
package/wireshark/wireshark.mk +2 -2
index f7cc8f8..5b5abf2 100644
@@ -38,7 +38,7 @@ WIRESHARK_CONF_OPTS += --with-gtk=no
 endif
 
 # Qt4 needs accessibility, we don't support it
-ifeq ($(BR2_PACKAGE_QT5BASE_WIDGETS),y)
+ifeq ($(BR2_PACKAGE_WIRESHARK_QT),y)
 WIRESHARK_CONF_OPTS += --with-qt=5
 WIRESHARK_DEPENDENCIES += qt5base qt5tools
 WIRESHARK_CONF_ENV += ac_cv_path_QTCHOOSER=""

@@ -52,7 +52,7 @@ WIRESHARK_CONF_OPTS += --with-qt=no
 endif
 
 # No GUI at all
-ifeq ($(BR2_PACKAGE_LIBGTK2)$(BR2_PACKAGE_LIBGTK3)$(BR2_PACKAGE_QT5BASE_WIDGETS),)
+ifeq ($(BR2_PACKAGE_WIRESHARK_GUI),)
 WIRESHARK_CONF_OPTS += --disable-wireshark
 endif
Signature · 1 line
2.7.4
#1 lore raw

RFC PATCH 1/1 package/wireshark: fix kconfig depndencies

Hi Yann,

Quoted 21 lines · Yann E. MORIN

Commit fa6feff (wireshark: needs the qt5tools lrelease utility) introduced a circular dependency chain in Kconfig:

package/qt5/qt5base/Config.in:118:error: recursive dependency detected!
package/qt5/qt5base/Config.in:118: symbol BR2_PACKAGE_QT5BASE_GUI is selected by BR2_PACKAGE_QT5TOOLS_PIXELTOOL
package/qt5/qt5tools/Config.in:19: symbol BR2_PACKAGE_QT5TOOLS_PIXELTOOL depends on BR2_PACKAGE_QT5TOOLS
package/qt5/qt5tools/Config.in:1: symbol BR2_PACKAGE_QT5TOOLS is selected by BR2_PACKAGE_QT5BASE_WIDGETS
package/qt5/qt5base/Config.in:131: symbol BR2_PACKAGE_QT5BASE_WIDGETS is selected by BR2_PACKAGE_QT5X11EXTRAS
package/qt5/qt5x11extras/Config.in:1: symbol BR2_PACKAGE_QT5X11EXTRAS depends on BR2_PACKAGE_QT5BASE_XCB
package/qt5/qt5base/Config.in:186: symbol BR2_PACKAGE_QT5BASE_XCB depends on BR2_PACKAGE_QT5BASE_GUI

Fix that by dropping the select on the Qt5Tools, and introduce an intermediate kconfig-level variable to represent the new condition, to simplify the .mk file.

That would make the condition for enabling/disabling the GUI to be a little bit more complex by adding yet another (long-ish) variable.

So we also introduce an intermediate kconfig-level variable that represent the condition to enable the GUI.

Quoted 8 lines
Reported-by Thomas Petazzoni <[email protected]>
Signed-off-by "Yann E. MORIN" <[email protected]>
Cc Thomas Petazzoni <[email protected]>
Cc Baruch Siach <[email protected]>

---
Note: UNTESTED. It does fix the Kconfig issue, but it is otherwise not even build-tested. Baruch? ;-)

Thanks for your analysis and patch.

I build tested one of the defconfigs that commit fa6feffa0def mentions. Then selected BR2_PACKAGE_QT5TOOLS manually, and built wireshark again. In both cases build succeeds after applying another (unrelated) patch[1]. So:

Tested-by Baruch Siach <[email protected]>

[1] http://patchwork.ozlabs.org/patch/684715/

baruch

Signature · 3 lines
     http://baruch.siach.name/blog/                  ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch at tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -
author
#2 lore raw

RFC PATCH 1/1 package/wireshark: fix kconfig depndencies

Baruch, All,

On 2016-10-20 20:55 +0300, Baruch Siach spake thusly:

Quoted 31 lines · Yann E. MORIN
Quoted 21 lines

Commit fa6feff (wireshark: needs the qt5tools lrelease utility) introduced a circular dependency chain in Kconfig:

package/qt5/qt5base/Config.in:118:error: recursive dependency detected!
package/qt5/qt5base/Config.in:118: symbol BR2_PACKAGE_QT5BASE_GUI is selected by BR2_PACKAGE_QT5TOOLS_PIXELTOOL
package/qt5/qt5tools/Config.in:19: symbol BR2_PACKAGE_QT5TOOLS_PIXELTOOL depends on BR2_PACKAGE_QT5TOOLS
package/qt5/qt5tools/Config.in:1: symbol BR2_PACKAGE_QT5TOOLS is selected by BR2_PACKAGE_QT5BASE_WIDGETS
package/qt5/qt5base/Config.in:131: symbol BR2_PACKAGE_QT5BASE_WIDGETS is selected by BR2_PACKAGE_QT5X11EXTRAS
package/qt5/qt5x11extras/Config.in:1: symbol BR2_PACKAGE_QT5X11EXTRAS depends on BR2_PACKAGE_QT5BASE_XCB
package/qt5/qt5base/Config.in:186: symbol BR2_PACKAGE_QT5BASE_XCB depends on BR2_PACKAGE_QT5BASE_GUI

Fix that by dropping the select on the Qt5Tools, and introduce an intermediate kconfig-level variable to represent the new condition, to simplify the .mk file.

That would make the condition for enabling/disabling the GUI to be a little bit more complex by adding yet another (long-ish) variable.

So we also introduce an intermediate kconfig-level variable that represent the condition to enable the GUI.

Quoted 8 lines
Reported-by Thomas Petazzoni <[email protected]>
Signed-off-by "Yann E. MORIN" <[email protected]>
Cc Thomas Petazzoni <[email protected]>
Cc Baruch Siach <[email protected]>

---
Note: UNTESTED. It does fix the Kconfig issue, but it is otherwise not even build-tested. Baruch? ;-)

Quoted 7 lines

Thanks for your analysis and patch.

I build tested one of the defconfigs that commit fa6feffa0def mentions. Then selected BR2_PACKAGE_QT5TOOLS manually, and built wireshark again. In both cases build succeeds after applying another (unrelated) patch[1]. So:

Tested-by Baruch Siach <[email protected]>

Thanks for testing! :-)

My build eventually finished successfully here too, with just the strictly minimum to enable wireshark and GUI stuff:

    BR2_arm=y
    BR2_cortex_a7=y
    BR2_TOOLCHAIN_EXTERNAL=y
    BR2_INIT_NONE=y
    BR2_SYSTEM_BIN_SH_NONE=y
    # BR2_PACKAGE_BUSYBOX is not set
    BR2_PACKAGE_QT5=y
    BR2_PACKAGE_QT5BASE_LICENSE_APPROVED=y
    BR2_PACKAGE_QT5BASE_GUI=y
    BR2_PACKAGE_QT5BASE_WIDGETS=y
    BR2_PACKAGE_QT5TOOLS=y
    BR2_PACKAGE_WIRESHARK=y

Then wiresharkd reports:

The Wireshark package has been configured with the following options:
GLib version : v2.50.1
Build wireshark : yes (with Qt5 v5.6.2)
Build wireshark-gtk : no
Build tshark : yes
Build tfshark : no
Build capinfos : yes
Build captype : yes
Build editcap : yes
Build dumpcap : yes
Build mergecap : yes
Build reordercap : yes
Build text2pcap : yes
Build randpkt : yes
Build dftest : yes
Build rawshark : yes
Build androiddump : yes
Build sshdump : no
Build ciscodump : no
Build randpktdump : yes
Build echld : no

Save files as pcap-ng by default : yes
Install dumpcap with capabilities : no
Install dumpcap setuid : no
Use dumpcap group : (none)
Use plugins : yes
Use external capture sources : yes
Use Lua library : no
Build Qt RTP player : no
Build GTK+ RTP player : no
Build profile binaries : no
Use pcap library : yes
Use zlib library : yes
Use kerberos library : no
Use c-ares library : no (name resolution will be disabled) Use SMI MIB library : no
Use GNU gcrypt library : no
Use SSL crypto library : no
Use GnuTLS library : no
Use POSIX capabilities library : no
Use GeoIP library : no
Use libssh library : no
Have ssh_userauth_agent : no
Use nl library : no
Use SBC codec library : no

Regards,
Yann E. MORIN.

Signature · 6 lines
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
Applied
#3 lore raw

RFC PATCH 1/1 package/wireshark: fix kconfig depndencies

In reply to Yann E. MORIN

Hello,

Quoted 26 lines · Yann E. MORIN

Commit fa6feff (wireshark: needs the qt5tools lrelease utility) introduced a circular dependency chain in Kconfig:

package/qt5/qt5base/Config.in:118:error: recursive dependency detected!
package/qt5/qt5base/Config.in:118: symbol BR2_PACKAGE_QT5BASE_GUI is selected by BR2_PACKAGE_QT5TOOLS_PIXELTOOL
package/qt5/qt5tools/Config.in:19: symbol BR2_PACKAGE_QT5TOOLS_PIXELTOOL depends on BR2_PACKAGE_QT5TOOLS
package/qt5/qt5tools/Config.in:1: symbol BR2_PACKAGE_QT5TOOLS is selected by BR2_PACKAGE_QT5BASE_WIDGETS
package/qt5/qt5base/Config.in:131: symbol BR2_PACKAGE_QT5BASE_WIDGETS is selected by BR2_PACKAGE_QT5X11EXTRAS
package/qt5/qt5x11extras/Config.in:1: symbol BR2_PACKAGE_QT5X11EXTRAS depends on BR2_PACKAGE_QT5BASE_XCB
package/qt5/qt5base/Config.in:186: symbol BR2_PACKAGE_QT5BASE_XCB depends on BR2_PACKAGE_QT5BASE_GUI

Fix that by dropping the select on the Qt5Tools, and introduce an intermediate kconfig-level variable to represent the new condition, to simplify the .mk file.

That would make the condition for enabling/disabling the GUI to be a little bit more complex by adding yet another (long-ish) variable.

So we also introduce an intermediate kconfig-level variable that represent the condition to enable the GUI.

Reported-by Thomas Petazzoni <[email protected]>
Signed-off-by "Yann E. MORIN" <[email protected]>
Cc Thomas Petazzoni <[email protected]>
Cc Baruch Siach <[email protected]>
Quoted 7 lines

---
Note: UNTESTED. It does fix the Kconfig issue, but it is otherwise not even build-tested. Baruch? ;-)

---
 package/wireshark/Config.in    | 15 +++++++++++++--
 package/wireshark/wireshark.mk |  4 ++--
 2 files changed, 15 insertions(+), 4 deletions(-)

Applied to master, after fixing the typo in the commit title. Thanks a lot for looking into this issue!

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com