Skip to contentSkip to conversation

Doc: cciss: Fix a typo in cciss.txt

PATCH Applied Masanari Iida 3 participants 3 messages Oct 20, 2016 – Oct 21, 2016 Documentation

lore
Share & tools
lore

Masanari Iida

author
#0 lore raw

PATCH 1/1 Doc: cciss: Fix a typo in cciss.txt

This patch fix a spelling typo in cciss.txt

Signed-off-by Masanari Iida <[email protected]>
---
 Documentation/blockdev/cciss.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/blockdev/cciss.txt +1 -1
index b79d0a13e7cd..3a5477cc456e 100644
@@ -184,7 +184,7 @@ infrequently used and the primary purpose of Smart Array controllers is to
 act as a RAID controller for disk drives, so the vast majority of commands
 are allocated for disk devices.  However, if you have more than a few tape
 drives attached to a smart array, the default number of commands may not be
-enought (for example, if you have 8 tape drives, you could only rewind 6
+enough (for example, if you have 8 tape drives, you could only rewind 6
 at one time with the default number of commands.)  The cciss_tape_cmds module
 parameter allows more commands (up to 16 more) to be allocated for use by
 tape drives.  For example:
Signature · 1 line
2.10.1.502.g6598894
Acked-by on v1 1/1
#1 lore raw
Quoted 32 lines

-----Original Message-----
From: Masanari Iida [mailto:[email protected]]
Sent: Thursday, October 20, 2016 3:00 PM
To: Don Brace; [email protected]; [email protected]; linux- [email protected]
Cc: Masanari Iida
Subject: [PATCH] [linux-next] Doc: cciss: Fix a typo in cciss.txt

EXTERNAL EMAIL

This patch fix a spelling typo in cciss.txt

Signed-off-by Masanari Iida <[email protected]>
---
 Documentation/blockdev/cciss.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/blockdev/cciss.txt +0 -0
index b79d0a13e7cd..3a5477cc456e 100644
@@ -184,7 +184,7 @@ infrequently used and the primary purpose of Smart

Array controllers is to
act as a RAID controller for disk drives, so the vast majority of commands are allocated for disk devices. However, if you have more than a few tape drives attached to a smart array, the default number of commands may not
be

Documentation/blockdev/cciss.txt +1 -1
-enought (for example, if you have 8 tape drives, you could only rewind 6
+enough (for example, if you have 8 tape drives, you could only rewind 6
 at one time with the default number of commands.)  The cciss_tape_cmds
Quoted 5 lines

module
parameter allows more commands (up to 16 more) to be allocated for use by tape drives. For example:
--
2.10.1.502.g6598894

Acked-by Don Brace <[email protected]>