Skip to contentSkip to conversation

How to suspend to disk with random encrypted swap

dm-crypt David Niklas 3 participants 4 messages Oct 22, 2016 – Oct 23, 2016

lore
Share & tools
lore
#0 lore raw

Hello,
I use a random encrypted swap partition, and I want to suspend my system to disk. I'm having two problems.
1. How does the kernel know where to resume from/at all?
2. How do I get the random passphrase for decrypting the swap (and remember it)?

Gentoo linux
cryptsetup 1.7.2

###### /etc/conf.d/dmcrypt #########

swap=swap
options=' -c aes -h sha256 -d /dev/urandom '
source='/dev/sda2'

####################################

Thanks,
David

#1 lore raw

Not really a cryptsetup question.

You should be aware of the fact, that suspend to disk on a randomly encrypted swap cannot work (for obvious reasons). In any way, you'll need to start the kernel and give it a way to read the disk image. The diskimage however should be encrypted for obvious reasons.

How can you resolve the hen and egg problem?

You can't with complete randomness.

You'll have to either:
1.) have a fixed passphrase for your swap, unlock swap during boot and then resume
2.) store your in memory image at some other place than swap, again, that place should be encrypted - you could possibly store the image on /, then you'll have to unlock / during boot to resume. 3.) forget about suspend alltogether.

To answer your questions to some extent:
The kernel will first try to find a suspend image signature on the default swap partition, the location can however be overridden with resume=, the gory details are in the kernel's documentation on boot parameters. The kernel will resume, if there's an image accessible, this can however be overridden with hibernate= .

Regards

-Sven

Am 22.10.2016 um 15:55 schrieb David Niklas:

Quoted 25 lines

Hello,
I use a random encrypted swap partition, and I want to suspend my system to disk. I'm having two problems.
1. How does the kernel know where to resume from/at all?
2. How do I get the random passphrase for decrypting the swap (and remember it)?

Gentoo linux
cryptsetup 1.7.2

###### /etc/conf.d/dmcrypt #########

swap=swap
options=' -c aes -h sha256 -d /dev/urandom '
source='/dev/sda2'

####################################

Thanks,
David
_______________________________________________
dm-crypt mailing list
[email protected]
http://www.saout.de/mailman/listinfo/dm-crypt

#2 lore raw

Hi David,

Sven is right, this is not really a cryptsetup question... However, let me add a few more pointers to his answers:

Basically, you'll have the same problem as someone booting with an encrypted root fs, so you can start there:
https://wiki.gentoo.org/wiki/Dm-crypt_full_disk_encryption#Generating_an_initramfs
- you'll need to add to your initramfs some code to luksOpen the swap partition (one way or another) and then start the resuming process. The swap partition obviously can't be encrypted with a random passphrase, but probably setting it up just like a "normal" data partition in gentoo will give you the correct result.

For starting the resuming process, you'll need to write "MAJOR:MINOR" of your resuming device (probably something like /dev/mapper/swap) into /sys/power/resume - the way my Slackware does that is the following in the init script of the initramfs:

  # Resume state from swap
  if [ "$RESUMEDEV" != "" ]; then
    # Find resume device if a label or UUID was given:
    if echo $RESUMEDEV | grep -q "LABEL=" || \
       echo $RESUMEDEV | grep -q "UUID=" ; then
      RESUMEDEV=$(findfs $RESUMEDEV)
    elif ls -l $RESUMEDEV | grep -q "^l" ; then
      RESUMEDEV=$(readlink -f $RESUMEDEV)
    fi
    echo "Trying to resume from $RESUMEDEV"
    RESMAJMIN=$(ls -l $RESUMEDEV | tr , : | awk '{ print $5$6 }')
    echo $RESMAJMIN > /sys/power/resume
  fi

I don't know if gentoo has a similar setup ready out of the box.

Good luck, and remember to backup early and often ;) Heiko

Quoted 62 lines · Sven Eschenberg

Not really a cryptsetup question.

You should be aware of the fact, that suspend to disk on a randomly encrypted swap cannot work (for obvious reasons). In any way, you'll need to start the kernel and give it a way to read the disk image. The diskimage however should be encrypted for obvious reasons.

How can you resolve the hen and egg problem?

You can't with complete randomness.

You'll have to either:
1.) have a fixed passphrase for your swap, unlock swap during boot and then resume
2.) store your in memory image at some other place than swap, again, that place should be encrypted - you could possibly store the image on /, then you'll have to unlock / during boot to resume.
3.) forget about suspend alltogether.

To answer your questions to some extent:
The kernel will first try to find a suspend image signature on the default swap partition, the location can however be overridden with resume=, the gory details are in the kernel's documentation on boot parameters. The kernel will resume, if there's an image accessible, this can however be overridden with hibernate= .

Regards

-Sven

Am 22.10.2016 um 15:55 schrieb David Niklas:

Quoted 16 lines

Hello,
I use a random encrypted swap partition, and I want to suspend my system to disk. I'm having two problems.
1. How does the kernel know where to resume from/at all?
2. How do I get the random passphrase for decrypting the swap (and remember it)?

Gentoo linux
cryptsetup 1.7.2

###### /etc/conf.d/dmcrypt #########

swap=swap
options=' -c aes -h sha256 -d /dev/urandom '
source='/dev/sda2'

Quoted 9 lines

####################################

Thanks,
David
_______________________________________________
dm-crypt mailing list
[email protected]
http://www.saout.de/mailman/listinfo/dm-crypt

_______________________________________________
dm-crypt mailing list
[email protected]
http://www.saout.de/mailman/listinfo/dm-crypt

Signature · 2 lines
eMails verschlüsseln mit PGP - privacy is your right!
Mein PGP-Key zur Verifizierung: http://pgp.mit.edu
#3 lore raw

Short answer:

No gentoo does not have direct support for encrypted rootfs/swap (for hibernate). However, I've heard that there's a strong pushing towards dracut for initramfs handling (well parts of the dev community however), if genkernel does not fulfil your needs. That is however from an OpenRC POV, I'd say. Systemd handles encrypted block devices a little different and you might end up with a lot more mambo jambo, than a little shell scripting, to get things into place.

Certainly the gentoo community might have pointers to various possibilities including those some of them tried already ;-).

Regards

-Sven

P.S.: https://wiki.gentoo.org/wiki/Initramfs/Guide for Gentoo'S initramfs approaches...

Am 23.10.2016 um 12:52 schrieb Heiko Rosemann:

Quoted 81 lines

Hi David,

[cropped]
I don't know if gentoo has a similar setup ready out of the box.

Good luck, and remember to backup early and often ;) Heiko

Quoted 57 lines · Sven Eschenberg

Not really a cryptsetup question.

You should be aware of the fact, that suspend to disk on a randomly encrypted swap cannot work (for obvious reasons). In any way, you'll need to start the kernel and give it a way to read the disk image. The diskimage however should be encrypted for obvious reasons.

How can you resolve the hen and egg problem?

You can't with complete randomness.

You'll have to either:
1.) have a fixed passphrase for your swap, unlock swap during boot and then resume
2.) store your in memory image at some other place than swap, again, that place should be encrypted - you could possibly store the image on /, then you'll have to unlock / during boot to resume.
3.) forget about suspend alltogether.

To answer your questions to some extent:
The kernel will first try to find a suspend image signature on the default swap partition, the location can however be overridden with resume=, the gory details are in the kernel's documentation on boot parameters. The kernel will resume, if there's an image accessible, this can however be overridden with hibernate= .

Regards

-Sven

Am 22.10.2016 um 15:55 schrieb David Niklas:

Quoted 16 lines

Hello,
I use a random encrypted swap partition, and I want to suspend my system to disk. I'm having two problems.
1. How does the kernel know where to resume from/at all?
2. How do I get the random passphrase for decrypting the swap (and remember it)?

Gentoo linux
cryptsetup 1.7.2

###### /etc/conf.d/dmcrypt #########

swap=swap
options=' -c aes -h sha256 -d /dev/urandom '
source='/dev/sda2'

Quoted 9 lines

####################################

Thanks,
David
_______________________________________________
dm-crypt mailing list
[email protected]
http://www.saout.de/mailman/listinfo/dm-crypt

Quoted 5 lines

_______________________________________________
dm-crypt mailing list
[email protected]
http://www.saout.de/mailman/listinfo/dm-crypt

_______________________________________________
dm-crypt mailing list
[email protected]
http://www.saout.de/mailman/listinfo/dm-crypt