arm: dts: exynos4x12: fix the minor things
Subsystems (2)
PATCH 1/5 arm: dts: exynos4x12: fix the minor things
Fixed the minor things.
1. Removed '`' thing in comments
2. Fix the wrong interrupts value from 77 to 131
--- arch/arm/dts/exynos4x12.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/dts/exynos4x12.dtsi +2 -2
@@ -14,7 +14,7 @@ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as -` * published by the Free Software Foundation. + * published by the Free Software Foundation. */ #include "exynos4.dtsi"
@@ -104,7 +104,7 @@ mshc_0: mmc at 12550000 { compatible = "samsung,exynos4412-dw-mshc"; reg = <0x12550000 0x1000>; - interrupts = <0 77 0>; + interrupts = <0 131 0>; #address-cells = <1>; #size-cells = <0>; fifo-depth = <0x80>;
Signature · 1 line
2.10.1
PATCH 2/5 arm: dts: exynos4x12: remove the dupulicated node
mshc_0 node should be overwriten the defined node in exynos4.dtsi. It's meaningless. So removed this node. Instead, use the node in exynos4.dtsi.
--- arch/arm/dts/exynos4x12.dtsi | 13 ------------- 1 file changed, 13 deletions(-)
arch/arm/dts/exynos4x12.dtsi +0 -13
@@ -27,7 +27,6 @@ pinctrl1 = &pinctrl_1; pinctrl2 = &pinctrl_2; pinctrl3 = &pinctrl_3; - mshc0 = &mshc_0; }; pd_isp: isp-power-domain at 10023CA0 {
@@ -100,16 +99,4 @@ clock-names = "sclk_fimg2d", "fimg2d"; status = "disabled"; }; - - mshc_0: mmc at 12550000 { - compatible = "samsung,exynos4412-dw-mshc"; - reg = <0x12550000 0x1000>; - interrupts = <0 131 0>; - #address-cells = <1>; - #size-cells = <0>; - fifo-depth = <0x80>; - clocks = <&clock 301>, <&clock 149>; - clock-names = "biu", "ciu"; - status = "disabled"; - }; };
Signature · 1 line
2.10.1
PATCH 2/5 arm: dts: exynos4x12: remove the dupulicated node
Quoted 1 line · Jaehoon Chung
mshc_0node should be overwriten the defined node inexynos4.dtsi.
I think you mean 'The mshc_0 node overwrites the defined node...'
Quoted 1 line
It's meaningless. So removed this node. Instead, use the node in
exynos4.dtsi.
'So remove this node'
Quoted 5 lines
Signed-off-by Jaehoon Chung <[email protected]>--- arch/arm/dts/exynos4x12.dtsi | 13 ------------- 1 file changed, 13 deletions(-)
PATCH 2/5 arm: dts: exynos4x12: remove the dupulicated node
Quoted 8 lines · Simon Glass
Quoted 1 line · Jaehoon Chung
mshc_0node should be overwriten the defined node inexynos4.dtsi.I think you mean 'The
mshc_0node overwrites the defined node...'Quoted 1 line
It's meaningless. So removed this node. Instead, use the node in
exynos4.dtsi.'So remove this node'
Will fix
Quoted 11 lines
Quoted 6 lines
Signed-off-by Jaehoon Chung <[email protected]>--- arch/arm/dts/exynos4x12.dtsi | 13 ------------- 1 file changed, 13 deletions(-)Reviewed-by Simon Glass <[email protected]>
PATCH 3/5 arm: dts: exynos4: change the compatible to meaning name
In reply to Jaehoon ChungChanged the compatible from generic thing to meaning compatible. "samsung,exynos-mmc" should be removed.
--- arch/arm/dts/exynos4.dtsi | 25 +++++++++++++++---------- 1 file changed, 15 insertions(+), 10 deletions(-)
arch/arm/dts/exynos4.dtsi +15 -10
@@ -111,44 +111,49 @@ interrupts = <7 63 0>; }; - sdhci at 12510000 { + sdhci0: sdhci at 12510000 { #address-cells = <1>; #size-cells = <0>; - compatible = "samsung,exynos-mmc"; + compatible = "samsung,exynos4412-sdhci"; reg = <0x12510000 0x1000>; interrupts = <0 75 0>; + status = "disabled"; }; - sdhci at 12520000 { + sdhci1: sdhci at 12520000 { #address-cells = <1>; #size-cells = <0>; - compatible = "samsung,exynos-mmc"; + compatible = "samsung,exynos4412-sdhci"; reg = <0x12520000 0x1000>; interrupts = <0 76 0>; + status = "disabled"; }; - sdhci at 12530000 { + sdhci2: sdhci at 12530000 { #address-cells = <1>; #size-cells = <0>; - compatible = "samsung,exynos-mmc"; + compatible = "samsung,exynos4412-sdhci"; reg = <0x12530000 0x1000>; interrupts = <0 77 0>; + status = "disabled"; }; - sdhci at 12540000 { + sdhci3: sdhci at 12540000 { #address-cells = <1>; #size-cells = <0>; - compatible = "samsung,exynos-mmc"; + compatible = "samsung,exynos4412-sdhci"; reg = <0x12540000 0x1000>; interrupts = <0 78 0>; + status = "disabled"; }; - dwmmc at 12550000 { + mshc_0: dwmmc at 12550000 { #address-cells = <1>; #size-cells = <0>; - compatible = "samsung,exynos-dwmmc"; + compatible = "samsung,exynos4412-dw-mshc"; reg = <0x12550000 0x1000>; interrupts = <0 131 0>; + status = "disabled"; }; };
Signature · 1 line
2.10.1
PATCH 3/5 arm: dts: exynos4: change the compatible to meaning name
Quoted 7 lines · Jaehoon Chung
Changed the compatible from generic thing to meaning compatible. "samsung,exynos-mmc" should be removed.
Signed-off-by Jaehoon Chung <[email protected]>--- arch/arm/dts/exynos4.dtsi | 25 +++++++++++++++---------- 1 file changed, 15 insertions(+), 10 deletions(-)
Does the drivers need to change?
PATCH 3/5 arm: dts: exynos4: change the compatible to meaning name
Quoted 4 lines · Simon Glass
Quoted 3 lines · Jaehoon Chung
Changed the compatible from generic thing to meaning compatible. "samsung,exynos-mmc" should be removed.
Quoted 8 lines
Quoted 4 lines
Signed-off-by Jaehoon Chung <[email protected]>--- arch/arm/dts/exynos4.dtsi | 25 +++++++++++++++---------- 1 file changed, 15 insertions(+), 10 deletions(-)Reviewed-by Simon Glass <[email protected]>Does the drivers need to change?
Already prepared to use these.
On MMC of exynos, drivers can use both with legacy and DM.
When it changes to DM, i will remove everything relevant to legacy for exynos.
Best Regards,
Jaehoon Chung
Quoted 3 lines
PATCH 4/5 arm: dts: exynos4: change to use their parent node
In reply to Jaehoon ChungDidn't overwrite the node. Just reuse the parent node. And add the Exynos Series specific properties.
--- arch/arm/dts/exynos4210-origen.dts | 24 ++++--------- arch/arm/dts/exynos4210-trats.dts | 37 +++++++------------- arch/arm/dts/exynos4210-universal_c210.dts | 36 ++++++++------------ arch/arm/dts/exynos4412-odroid.dts | 46 ++++++++++--------------- arch/arm/dts/exynos4412-trats2.dts | 54 +++++++++++++----------------- 5 files changed, 73 insertions(+), 124 deletions(-)
arch/arm/dts/exynos4210-origen.dts +6 -18
@@ -22,24 +22,12 @@ aliases { serial0 = "/serial at 13800000"; console = "/serial at 13820000"; - mmc2 = "/sdhci at 12530000"; - }; - - sdhci at 12510000 { - status = "disabled"; - }; - - sdhci at 12520000 { - status = "disabled"; - }; - - sdhci at 12530000 { - samsung,bus-width = <4>; - samsung,timing = <1 2 3>; - cd-gpios = <&gpk2 2 0>; }; +}; - sdhci at 12540000 { - status = "disabled"; - }; +&sdhci2 { + samsung,bus-width = <4>; + samsung,timing = <1 2 3>; + cd-gpios = <&gpk2 2 0>; + status = "okay"; };
arch/arm/dts/exynos4210-trats.dts +12 -25
@@ -29,8 +29,6 @@ i2c7 = "/i2c at 138d0000"; serial0 = "/serial at 13800000"; console = "/serial at 13820000"; - mmc0 = "/sdhci at 12510000"; - mmc2 = "/sdhci at 12530000"; }; fimd at 11c00000 {
@@ -97,28 +95,17 @@ samsung,dsim-device-reverse-panel = <1>; }; +}; - sdhci at 12510000 { - samsung,bus-width = <8>; - samsung,timing = <1 3 3>; - pwr-gpios = <&gpk0 2 0>; - }; - - sdhci at 12520000 { - status = "disabled"; - }; - - sdhci at 12530000 { - samsung,bus-width = <4>; - samsung,timing = <1 2 3>; - cd-gpios = <&gpx3 4 0>; - }; - - sdhci at 12540000 { - status = "disabled"; - }; - - dwmmc at 12550000 { - status = "disabled"; - }; +&sdhci0 { + samsung,bus-width = <8>; + samsung,timing = <1 3 3>; + pwr-gpios = <&gpk0 2 0>; + status = "okay"; +}; +&sdhci2 { + samsung,bus-width = <4>; + samsung,timing = <1 2 3>; + cd-gpios = <&gpx3 4 0>; + status = "okay"; };
arch/arm/dts/exynos4210-universal_c210.dts +14 -22
@@ -17,28 +17,6 @@ aliases { serial0 = "/serial at 13800000"; console = "/serial at 13820000"; - mmc0 = "/sdhci at 12510000"; - mmc2 = "/sdhci at 12530000"; - }; - - sdhci at 12510000 { - samsung,bus-width = <8>; - samsung,timing = <1 3 3>; - pwr-gpios = <&gpk0 2 0>; - }; - - sdhci at 12520000 { - status = "disabled"; - }; - - sdhci at 12530000 { - samsung,bus-width = <4>; - samsung,timing = <1 2 3>; - cd-gpios = <&gpx3 4 0>; - }; - - sdhci at 12540000 { - status = "disabled"; }; soft-spi {
@@ -94,3 +72,17 @@ samsung,rgb-mode = <0>; }; }; + +&sdhci0 { + samsung,bus-width = <8>; + samsung,timing = <1 3 3>; + pwr-gpios = <&gpk0 2 0>; + status = "okay"; +}; + +&sdhci2 { + samsung,bus-width = <4>; + samsung,timing = <1 2 3>; + cd-gpios = <&gpx3 4 0>; + status = "okay"; +};
arch/arm/dts/exynos4412-odroid.dts +18 -28
55 lines not on this page · raw message
arch/arm/dts/exynos4412-trats2.dts +23 -31
67 lines not on this page · raw message
Signature · 1 line
2.10.1
PATCH 4/5 arm: dts: exynos4: change to use their parent node
Quoted 11 lines · Jaehoon Chung
Didn't overwrite the node. Just reuse the parent node. And add the Exynos Series specific properties.
Signed-off-by Jaehoon Chung <[email protected]>--- arch/arm/dts/exynos4210-origen.dts | 24 ++++--------- arch/arm/dts/exynos4210-trats.dts | 37 +++++++------------- arch/arm/dts/exynos4210-universal_c210.dts | 36 ++++++++------------ arch/arm/dts/exynos4412-odroid.dts | 46 ++++++++++--------------- arch/arm/dts/exynos4412-trats2.dts | 54 +++++++++++++----------------- 5 files changed, 73 insertions(+), 124 deletions(-)
Presumably (as Tom asks) these are syncing up with the kernel?
- Simon
PATCH 4/5 arm: dts: exynos4: change to use their parent node
Quoted 13 lines · Simon Glass
Quoted 11 lines · Jaehoon Chung
Didn't overwrite the node. Just reuse the parent node. And add the Exynos Series specific properties.
Signed-off-by Jaehoon Chung <[email protected]>--- arch/arm/dts/exynos4210-origen.dts | 24 ++++--------- arch/arm/dts/exynos4210-trats.dts | 37 +++++++------------- arch/arm/dts/exynos4210-universal_c210.dts | 36 ++++++++------------ arch/arm/dts/exynos4412-odroid.dts | 46 ++++++++++--------------- arch/arm/dts/exynos4412-trats2.dts | 54 +++++++++++++----------------- 5 files changed, 73 insertions(+), 124 deletions(-)
Quoted 3 lines
Reviewed-by Simon Glass <[email protected]>Presumably (as Tom asks) these are syncing up with the kernel?
Will resend. Thanks!
Quoted 5 lines
- Simon
PATCH 5/5 configs: add the CONFIG_BLK and CONFIG_DM_MMC/OPS for exynos4 series
In reply to Jaehoon ChungTo use the CONFIG_BLK/CONFIG_DM_MMC/CONFIG_DM_MMC_OPS, add the configurations for exynos4 series.(by default)
--- configs/odroid_defconfig | 3 +++ configs/origen_defconfig | 3 +++ configs/smdkv310_defconfig | 3 +++ configs/trats2_defconfig | 3 +++ configs/trats_defconfig | 3 +++ 5 files changed, 15 insertions(+)
configs/odroid_defconfig +3 -0
@@ -49,3 +49,6 @@ CONFIG_G_DNL_MANUFACTURER="Samsung" CONFIG_G_DNL_VENDOR_NUM=0x04e8 CONFIG_G_DNL_PRODUCT_NUM=0x6601 CONFIG_ERRNO_STR=y +CONFIG_BLK=y +CONFIG_DM_MMC=y +CONFIG_DM_MMC_OPS=y
configs/origen_defconfig +3 -0
@@ -35,3 +35,6 @@ CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_G_DNL_MANUFACTURER="Samsung" CONFIG_G_DNL_VENDOR_NUM=0x04e8 CONFIG_G_DNL_PRODUCT_NUM=0x6601 +CONFIG_BLK=y +CONFIG_DM_MMC=y +CONFIG_DM_MMC_OPS=y
configs/smdkv310_defconfig +3 -0
@@ -24,3 +24,6 @@ CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_BLK=y +CONFIG_DM_MMC=y +CONFIG_DM_MMC_OPS=y
configs/trats2_defconfig +3 -0
@@ -38,3 +38,6 @@ CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_G_DNL_MANUFACTURER="Samsung" CONFIG_G_DNL_VENDOR_NUM=0x04e8 CONFIG_G_DNL_PRODUCT_NUM=0x6601 +CONFIG_BLK=y +CONFIG_DM_MMC=y +CONFIG_DM_MMC_OPS=y
configs/trats_defconfig +3 -0
@@ -37,3 +37,6 @@ CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_G_DNL_MANUFACTURER="Samsung" CONFIG_G_DNL_VENDOR_NUM=0x04e8 CONFIG_G_DNL_PRODUCT_NUM=0x6601 +CONFIG_BLK=y +CONFIG_DM_MMC=y +CONFIG_DM_MMC_OPS=y
Signature · 1 line
2.10.1
PATCH 5/5 configs: add the CONFIG_BLK and CONFIG_DM_MMC/OPS for exynos4 series
Quoted 11 lines · Jaehoon Chung
To use the CONFIG_BLK/CONFIG_DM_MMC/CONFIG_DM_MMC_OPS, add the configurations for exynos4 series.(by default)
Signed-off-by Jaehoon Chung <[email protected]>--- configs/odroid_defconfig | 3 +++ configs/origen_defconfig | 3 +++ configs/smdkv310_defconfig | 3 +++ configs/trats2_defconfig | 3 +++ configs/trats_defconfig | 3 +++ 5 files changed, 15 insertions(+)
But please use savedefconfig to get the ordering correct. A recent change should make DM_MMC and DM_MMC_OPS the default if BLK is enabled.
- Simon
PATCH 5/5 configs: add the CONFIG_BLK and CONFIG_DM_MMC/OPS for exynos4 series
Quoted 13 lines · Simon Glass
Quoted 11 lines · Jaehoon Chung
To use the CONFIG_BLK/CONFIG_DM_MMC/CONFIG_DM_MMC_OPS, add the configurations for exynos4 series.(by default)
Signed-off-by Jaehoon Chung <[email protected]>--- configs/odroid_defconfig | 3 +++ configs/origen_defconfig | 3 +++ configs/smdkv310_defconfig | 3 +++ configs/trats2_defconfig | 3 +++ configs/trats_defconfig | 3 +++ 5 files changed, 15 insertions(+)
Quoted 5 lines
Reviewed-by Simon Glass <[email protected]>But please use savedefconfig to get the ordering correct. A recent change should make
DM_MMCandDM_MMC_OPSthe default if BLK is enabled.
Got it. Thanks!
Best Regards,
Jaehoon Chung
Quoted 5 lines
- Simon
PATCH 1/5 arm: dts: exynos4x12: fix the minor things
In reply to Jaehoon ChungQuoted 8 lines · Jaehoon Chung
Fixed the minor things.
1. Removed '`' thing in comments
2. Fix the wrong interrupts value from 77 to 131Signed-off-by Jaehoon Chung <[email protected]>--- arch/arm/dts/exynos4x12.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
For this and the rest of the series, are these problems present in the Linux Kernel or are you backporting fixes? If backporting you should note that, thanks.
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20161024/58c81743/attachment.sig>
PATCH 1/5 arm: dts: exynos4x12: fix the minor things
Quoted 6 lines · Tom Rini
Quoted 4 lines · Jaehoon Chung
Fixed the minor things.
1. Removed '`' thing in comments
2. Fix the wrong interrupts value from 77 to 131
Quoted 8 lines
Quoted 4 lines
Signed-off-by Jaehoon Chung <[email protected]>--- arch/arm/dts/exynos4x12.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)For this and the rest of the series, are these problems present in the Linux Kernel or are you backporting fixes? If backporting you should note that, thanks.
Thanks. I will recheck about your comments.
But something might be my wrong. Now i'm checking the entire exynos4 series TRM.
And will resend the patch-set after adding the commit message in more details.
Best Regards,
Jaehoon Chung