ASoC: add hi6210-i2s DT bindings
Subsystems (3)
PATCH RESEND v3 1/2 ASoC: add hi6210-i2s DT bindings
Adds DT bindings documentation for the hi6210-i2s driver.
---
v3:
* Simplified and reworked dt binding
--- .../bindings/sound/hisilicon,hi6210-i2s.txt | 32 ++++++++++++++++++++++ 1 file changed, 32 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/hisilicon,hi6210-i2s.txt
Documentation/devicetree/bindings/sound/hisilicon,hi6210-i2s.txt new file +32 -0
@@ -0,0 +1,32 @@ +* Hisilicon 6210 i2s controller + +Required properties: + +- compatible: should be one of the following: + - "hisilicon,hi6210-i2s" +- reg: physical base address of the i2s controller unit and length of + memory mapped region. +- interrupts: should contain the i2s interrupt. +- clocks: a list of phandle + clock-specifier pairs, one for each entry + in clock-names. +- clock-names: should contain following: + - "dacodec" + - "i2s-base" +- dmas: DMA specifiers for tx dma. See the DMA client binding, + Documentation/devicetree/bindings/dma/dma.txt +- dma-names: should be "tx" and "rx" +- hisilicon,sysctrl-syscon: phandle to sysctrl syscon + +Example for the hi6210 i2s controller: + +i2s0: hi6210_i2s { + compatible = "hisilicon,hi6210-i2s"; + reg = <0x0 0xf7118000 0x0 0x8000>; /* i2s unit */ + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; /* 155 "DigACodec_intr"-32 */ + clocks = <&sys_ctrl HI6220_DACODEC_PCLK>, + <&sys_ctrl HI6220_BBPPLL0_DIV>; + clock-names = "dacodec", "i2s-base"; + dmas = <&dma0 15 &dma0 14>; + dma-names = "rx", "tx"; + hisilicon,sysctrl-syscon = <&sys_ctrl>; +};
Signature · 1 line
2.7.4
PATCH RESEND v3 2/2 ASoC: hisilicon: Add hi6210 i2s audio driver
From: Andy Green <[email protected]>
Add driver for hi6210 i2s controller found on hi6220 boards.
[jstultz: Forward ported to mainline, fairly major rework
based on suggestions from Mark Brown]
---
v2:
* Folded in fixes from kbuildbot
* Split i2s and hdmi-card drivers up
* Major rework from MarkB's suggestions
v3:
* Folded in fixes from Guodong
* Simplified and reworked devicetree bindings
* Integrated review feedback from Mark Brown
--- sound/soc/Kconfig | 1 + sound/soc/Makefile | 1 + sound/soc/hisilicon/Kconfig | 5 + sound/soc/hisilicon/Makefile | 1 + sound/soc/hisilicon/hi6210-i2s.c | 628 +++++++++++++++++++++++++++++++++++++++ sound/soc/hisilicon/hi6210-i2s.h | 276 +++++++++++++++++ 6 files changed, 912 insertions(+) create mode 100644 sound/soc/hisilicon/Kconfig create mode 100644 sound/soc/hisilicon/Makefile create mode 100644 sound/soc/hisilicon/hi6210-i2s.c create mode 100644 sound/soc/hisilicon/hi6210-i2s.h
sound/soc/Kconfig +1 -0
@@ -47,6 +47,7 @@ source "sound/soc/cirrus/Kconfig" source "sound/soc/davinci/Kconfig" source "sound/soc/dwc/Kconfig" source "sound/soc/fsl/Kconfig" +source "sound/soc/hisilicon/Kconfig" source "sound/soc/jz4740/Kconfig" source "sound/soc/nuc900/Kconfig" source "sound/soc/omap/Kconfig"
sound/soc/Makefile +1 -0
@@ -27,6 +27,7 @@ obj-$(CONFIG_SND_SOC) += cirrus/ obj-$(CONFIG_SND_SOC) += davinci/ obj-$(CONFIG_SND_SOC) += dwc/ obj-$(CONFIG_SND_SOC) += fsl/ +obj-$(CONFIG_SND_SOC) += hisilicon/ obj-$(CONFIG_SND_SOC) += jz4740/ obj-$(CONFIG_SND_SOC) += img/ obj-$(CONFIG_SND_SOC) += intel/
sound/soc/hisilicon/Kconfig new file +5 -0
@@ -0,0 +1,5 @@ +config SND_I2S_HI6210_I2S + tristate "Hisilicon I2S controller" + select SND_SOC_GENERIC_DMAENGINE_PCM + help + Hisilicon I2S
sound/soc/hisilicon/Makefile new file +1 -0
@@ -0,0 +1 @@ +obj-$(CONFIG_SND_I2S_HI6210_I2S) += hi6210-i2s.o
sound/soc/hisilicon/hi6210-i2s.c new file +628 -0
628 lines not on this page · raw message
sound/soc/hisilicon/hi6210-i2s.h new file +276 -0
276 lines not on this page · raw message
Signature · 1 line
2.7.4
Mark Brown
maintainerQuoted 6 lines · John Stultz
Adds DT bindings documentation for the hi6210-i2s driver.
---
v3:
* Simplified and reworked dt binding
---
Please allow a reasonable time for review, especially given that there's been no visible effort here to address the problem with the IP having multiple audio interfaces. Even HiKey has two of them wired up!