power: axp20x_ac: Add support for ac power-supply on axp20x and axp22x pmics
Subsystems (3)
PATCH 1/1 power: axp20x_ac: Add support for ac power-supply on axp20x and axp22x pmics
Add support for monitoring of ac power supply input. axp22x is the same as axp20x except it can not monitor voltage or current, only presence of power.
This is mainly a copy of the existing axp20x_usb_power driver modified to use the ac power supply registers instead of the usb registers.
axp20x tested on a generic A20 tablet.
axp22x tested on an a33 ga10h-v1.1 tablet.
--- .../bindings/power_supply/axp20x_ac_power.txt | 35 ++++ arch/arm/boot/dts/axp209.dtsi | 5 + arch/arm/boot/dts/axp22x.dtsi | 5 + drivers/mfd/axp20x.c | 11 ++ drivers/power/Makefile | 1 + drivers/power/axp20x_ac_power.c | 219 +++++++++++++++++++++ 6 files changed, 276 insertions(+) create mode 100644 Documentation/devicetree/bindings/power_supply/axp20x_ac_power.txt create mode 100644 drivers/power/axp20x_ac_power.c
Documentation/devicetree/bindings/power_supply/axp20x_ac_power.txt new file +35 -0
@@ -0,0 +1,35 @@ +AXP20x AC power supply + +Required Properties: +-compatible: One of: "x-powers,axp202-ac-power-supply" + "x-powers,axp221-ac-power-supply" + +This node is a subnode of the axp20x PMIC. + +Example: + +axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + + regulators { + x-powers,dcdc-freq = <1500>; + + vdd_cpu: dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1450000>; + regulator-name = "vdd-cpu"; + }; + + ... + }; + + ac-power-supply: ac-power-supply { + compatible = "x-powers,axp202-ac-power-supply"; + }; +};
arch/arm/boot/dts/axp209.dtsi +5 -0
@@ -97,6 +97,11 @@ }; }; + ac_power_supply: ac_power_supply { + compatible = "x-powers,axp202-ac-power-supply"; + status = "disabled"; + }; + usb_power_supply: usb_power_supply { compatible = "x-powers,axp202-usb-power-supply"; status = "disabled";
arch/arm/boot/dts/axp22x.dtsi +5 -0
@@ -148,6 +148,11 @@ }; }; + ac_power_supply: ac_power_supply { + compatible = "x-powers,axp221-ac-power-supply"; + status = "disabled"; + }; + usb_power_supply: usb_power_supply { compatible = "x-powers,axp221-usb-power-supply"; status = "disabled";
drivers/mfd/axp20x.c +11 -0
@@ -162,6 +162,12 @@ static struct resource axp20x_ac_power_supply_resources[] = { DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_ACIN_OVER_V, "ACIN_OVER_V"), }; +static struct resource axp22x_ac_power_supply_resources[] = { +DEFINE_RES_IRQ_NAMED (AXP20X_IRQ_ACIN_PLUGIN ,"ACIN_PLUGIN" ), +DEFINE_RES_IRQ_NAMED (AXP20X_IRQ_ACIN_REMOVAL ,"ACIN_REMOVAL" ), +DEFINE_RES_IRQ_NAMED (AXP20X_IRQ_ACIN_OVER_V ,"ACIN_OVER_V" ), +}; +static struct resource axp20x_pek_resources[] = { { .name ="PEK_DBR" ,
@@ -595,6 +601,11 @@ static struct mfd_cell axp22x_cells[] = { }, { .name = "axp20x-regulator", }, { + .name = "axp20x-ac-power-supply", + .of_compatible = "x-powers,axp221-ac-power-supply", + .num_resources = ARRAY_SIZE(axp22x_ac_power_supply_resources), + .resources = axp22x_ac_power_supply_resources, + }, { .name = "axp20x-usb-power-supply", .of_compatible = "x-powers,axp221-usb-power-supply", .num_resources = ARRAY_SIZE(axp22x_usb_power_supply_resources),
drivers/power/Makefile +1 -0
@@ -9,6 +9,7 @@ obj-$(CONFIG_GENERIC_ADC_BATTERY) += generic-adc-battery.o obj-$(CONFIG_PDA_POWER) += pda_power.o obj-$(CONFIG_APM_POWER) += apm_power.o +obj-$(CONFIG_AXP20X_POWER) += axp20x_ac_power.o obj-$(CONFIG_AXP20X_POWER) += axp20x_usb_power.o obj-$(CONFIG_MAX8925_POWER) += max8925_power.o obj-$(CONFIG_WM831X_BACKUP) += wm831x_backup.o
drivers/power/axp20x_ac_power.c new file +219 -0
219 lines not on this page · raw message
Signature · 6 lines
2.5.3 -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/[email protected] For more options, visit https://groups.google.com/d/optout.
PATCH 1/1 power: axp20x_ac: Add support for ac power-supply on axp20x and axp22x pmics
Quoted 10 lines · Lawrence Yu
Add support for monitoring of ac power supply input. axp22x is the same as axp20x except it can not monitor voltage or current, only presence of power.
This is mainly a copy of the existing
axp20x_usb_powerdriver modified to use the ac power supply registers instead of the usb registers.axp20x tested on a generic A20 tablet.
axp22x tested on an a33 ga10h-v1.1 tablet.
Quoted 8 lines
Signed-off-by Lawrence Yu <[email protected]>--- .../bindings/power_supply/axp20x_ac_power.txt | 35 ++++ arch/arm/boot/dts/axp209.dtsi | 5 + arch/arm/boot/dts/axp22x.dtsi | 5 + drivers/mfd/axp20x.c | 11 ++ drivers/power/Makefile | 1 + drivers/power/axp20x_ac_power.c | 219 +++++++++++++++++++++
Please split this patch up per-subsystem.
Quoted 343 lines
6 files changed, 276 insertions(+) create mode 100644 Documentation/devicetree/bindings/power_supply/axp20x_ac_power.txt create mode 100644 drivers/power/axp20x_ac_power.cDocumentation/devicetree/bindings/power_supply/axp20x_ac_power.txt new file +35
-0@@ -0,0 +1,35 @@ +AXP20x AC power supply + +Required Properties: +-compatible: One of: "x-powers,axp202-ac-power-supply" + "x-powers,axp221-ac-power-supply" + +This node is a subnode of the axp20x PMIC. + +Example: + +axp209: pmic at 34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + + regulators { + x-powers,dcdc-freq = <1500>; + + vdd_cpu: dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1450000>; + regulator-name = "vdd-cpu"; + }; + + ... + }; + + ac-power-supply: ac-power-supply { + compatible = "x-powers,axp202-ac-power-supply"; + }; +};arch/arm/boot/dts/axp209.dtsi +5
-0@@ -97,6 +97,11 @@ }; }; + ac_power_supply: ac_power_supply { + compatible = "x-powers,axp202-ac-power-supply"; + status = "disabled"; + }; + usb_power_supply: usb_power_supply { compatible = "x-powers,axp202-usb-power-supply"; status = "disabled";arch/arm/boot/dts/axp22x.dtsi +5
-0@@ -148,6 +148,11 @@ }; }; + ac_power_supply: ac_power_supply { + compatible = "x-powers,axp221-ac-power-supply"; + status = "disabled"; + }; + usb_power_supply: usb_power_supply { compatible = "x-powers,axp221-usb-power-supply"; status = "disabled";drivers/mfd/axp20x.c +11
-0@@ -162,6 +162,12 @@ static struct resource axp20x_ac_power_supply_resources[] = { DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_ACIN_OVER_V, "ACIN_OVER_V"), }; +static struct resource axp22x_ac_power_supply_resources[] = { +DEFINE_RES_IRQ_NAMED (AXP20X_IRQ_ACIN_PLUGIN ,"ACIN_PLUGIN" ), +DEFINE_RES_IRQ_NAMED (AXP20X_IRQ_ACIN_REMOVAL ,"ACIN_REMOVAL" ), +DEFINE_RES_IRQ_NAMED (AXP20X_IRQ_ACIN_OVER_V ,"ACIN_OVER_V" ), +}; +static struct resource axp20x_pek_resources[] = { { .name ="PEK_DBR" ,@@ -595,6 +601,11 @@ static struct mfd_cell axp22x_cells[] = { }, { .name = "axp20x-regulator", }, { + .name = "axp20x-ac-power-supply", + .of_compatible = "x-powers,axp221-ac-power-supply", + .num_resources = ARRAY_SIZE(axp22x_ac_power_supply_resources), + .resources = axp22x_ac_power_supply_resources, + }, { .name = "axp20x-usb-power-supply", .of_compatible = "x-powers,axp221-usb-power-supply", .num_resources = ARRAY_SIZE(axp22x_usb_power_supply_resources),drivers/power/Makefile +1
-0@@ -9,6 +9,7 @@ obj-$(CONFIG_GENERIC_ADC_BATTERY) += generic-adc-battery.o obj-$(CONFIG_PDA_POWER) += pda_power.o obj-$(CONFIG_APM_POWER) += apm_power.o +obj-$(CONFIG_AXP20X_POWER) += axp20x_ac_power.o obj-$(CONFIG_AXP20X_POWER) += axp20x_usb_power.o obj-$(CONFIG_MAX8925_POWER) += max8925_power.o obj-$(CONFIG_WM831X_BACKUP) += wm831x_backup.odrivers/power/axp20x_ac_power.c new file +219
-0@@ -0,0 +1,219 @@ +/* +* AXP20x PMIC AC power supply status driver +* +* Copyright (C) 2015 Hans de Goede <[email protected]> +* Copyright (C) 2014 Bruno Pr?mont <[email protected]> +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the +* Free Software Foundation; either version 2 of the License, or (at your +* option) any later version. +*/ + +#include <linux/device.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/mfd/axp20x.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/power_supply.h> +#include <linux/regmap.h> +#include <linux/slab.h> + +#define DRVNAME "axp20x-ac-power-supply" + +#define AXP20X_PWR_STATUS_ACIN_PRESENT BIT(7) +#define AXP20X_PWR_STATUS_ACIN_USED BIT(6) +#define AXP20X_ADC_EN1_ACIN_CURR BIT(4) +#define AXP20X_ADC_EN1_ACIN_VOLT BIT(5) + +struct axp20x_ac_power { +struct device_node *np; +struct regmap *regmap; +struct power_supply *supply; +}; + +static irqreturn_t axp20x_ac_power_irq (int irq,void *devid) +{ +struct axp20x_ac_power *power = devid; + +power_supply_changed (power->supply); + +return IRQ_HANDLED ; +} + +static int axp20x_ac_power_get_property (struct power_supply *psy, +enum power_supply_property psp,union power_supply_propval *val) +{ +struct axp20x_ac_power *power =power_supply_get_drvdata (psy); +unsigned int input; +int ret; + +switch (psp) { +case POWER_SUPPLY_PROP_VOLTAGE_NOW : + ret =axp20x_read_variable_width (power->regmap, +AXP20X_ACIN_V_ADC_H ,12 ); +if (ret <0 ) +return ret; + + val->intval = ret *1700 ;/* 1 step = 1.7 mV */ +return 0 ; +case POWER_SUPPLY_PROP_CURRENT_NOW : + ret =axp20x_read_variable_width (power->regmap, +AXP20X_ACIN_I_ADC_H ,12 ); +if (ret <0 ) +return ret; + + val->intval = ret *625 ;/* 1 step = 0.375 mA */ +return 0 ; +default : +break ; + } + +/* All the properties below need the input-status reg value */ + ret =regmap_read (power->regmap,AXP20X_PWR_INPUT_STATUS , &input); +if (ret) +return ret; + +switch (psp) { +case POWER_SUPPLY_PROP_PRESENT : + val->intval = !!(input &AXP20X_PWR_STATUS_ACIN_PRESENT ); +break ; +case POWER_SUPPLY_PROP_ONLINE : + val->intval = !!(input &AXP20X_PWR_STATUS_ACIN_USED ); +break ; +default : +return -EINVAL ; + } + +return 0 ; +} + +static enum power_supply_property axp20x_ac_power_properties[] = { +POWER_SUPPLY_PROP_PRESENT , +POWER_SUPPLY_PROP_ONLINE , +POWER_SUPPLY_PROP_VOLTAGE_NOW , +POWER_SUPPLY_PROP_CURRENT_NOW , +}; + +static enum power_supply_property axp22x_ac_power_properties[] = { +POWER_SUPPLY_PROP_PRESENT , +POWER_SUPPLY_PROP_ONLINE , +}; + +static const struct power_supply_desc axp20x_ac_power_desc = { + .name ="axp20x-ac" , + .type =POWER_SUPPLY_TYPE_MAINS , + .properties = axp20x_ac_power_properties, + .num_properties =ARRAY_SIZE (axp20x_ac_power_properties), + .get_property = axp20x_ac_power_get_property, +}; + +static const struct power_supply_desc axp22x_ac_power_desc = { + .name ="axp20x-ac" , + .type =POWER_SUPPLY_TYPE_MAINS , + .properties = axp22x_ac_power_properties, + .num_properties =ARRAY_SIZE (axp22x_ac_power_properties), + .get_property = axp20x_ac_power_get_property, +}; + +static int axp20x_ac_power_probe (struct platform_device *pdev) +{ +struct axp20x_dev *axp20x =dev_get_drvdata (pdev->dev.parent); +struct power_supply_config psy_cfg = {}; +struct axp20x_ac_power *power; +static const char *const axp20x_irq_names[] = { +"ACIN_PLUGIN" ,"ACIN_REMOVAL" ,NULL }; +static const char *const axp22x_irq_names[] = { +"ACIN_PLUGIN" ,"ACIN_REMOVAL" ,NULL }; +static const char *const *irq_names; +const struct power_supply_desc *ac_power_desc; +int i, irq, ret; + +if (!of_device_is_available (pdev->dev.of_node)) +return -ENODEV ; + +if (!axp20x) { +dev_err (&pdev->dev,"Parent drvdata not set\n" ); +return -EINVAL ; + } + + power =devm_kzalloc (&pdev->dev,sizeof (*power),GFP_KERNEL ); +if (!power) +return -ENOMEM ; + + power->np = pdev->dev.of_node; + power->regmap = axp20x->regmap; + +if (of_device_is_compatible (power->np, +"x-powers,axp202-ac-power-supply" )) { + +/* Enable acin voltage and current measurement */ + ret =regmap_update_bits (power->regmap,AXP20X_ADC_EN1 , +AXP20X_ADC_EN1_ACIN_CURR |AXP20X_ADC_EN1_ACIN_VOLT , +AXP20X_ADC_EN1_ACIN_CURR |AXP20X_ADC_EN1_ACIN_VOLT ); +if (ret) +return ret; + + ac_power_desc = &axp20x_ac_power_desc; + irq_names = axp20x_irq_names; + }else if (of_device_is_compatible (power->np, +"x-powers,axp221-ac-power-supply" )) { + ac_power_desc = &axp22x_ac_power_desc; + irq_names = axp22x_irq_names; + }else { +dev_err (&pdev->dev,"Unsupported AXP variant: %ld\n" , + axp20x->variant); +return -EINVAL ; + } + + psy_cfg.of_node = pdev->dev.of_node; + psy_cfg.drv_data = power; + + power->supply =devm_power_supply_register (&pdev->dev, ac_power_desc, + &psy_cfg); +if (IS_ERR (power->supply)) +return PTR_ERR (power->supply); + +/* Request irqs after registering, as irqs may trigger immediately */ +for (i =0 ; irq_names[i]; i++) { + irq =platform_get_irq_byname (pdev, irq_names[i]); +if (irq <0 ) { +dev_warn (&pdev->dev,"No IRQ for %s: %d\n" , + irq_names[i], irq); +continue ; + } + irq =regmap_irq_get_virq (axp20x->regmap_irqc, irq); + ret =devm_request_any_context_irq (&pdev->dev, irq, + axp20x_ac_power_irq,0 ,DRVNAME , power); +if (ret <0 ) +dev_warn (&pdev->dev,"Error requesting %s IRQ: %d\n" , + irq_names[i], ret); + } + +return 0 ; +} + +static const struct of_device_id axp20x_ac_power_match[] = { + { .compatible ="x-powers,axp202-ac-power-supply" }, + { .compatible ="x-powers,axp221-ac-power-supply" }, + { } +}; + +MODULE_DEVICE_TABLE (of, axp20x_ac_power_match); + +static struct platform_driver axp20x_ac_power_driver = { + .probe = axp20x_ac_power_probe, + .driver = { + .name =DRVNAME , + .of_match_table = axp20x_ac_power_match, + }, +}; + +module_platform_driver (axp20x_ac_power_driver); + +MODULE_AUTHOR ("Hans de Goede <[email protected]>" ); +MODULE_DESCRIPTION ("AXP20x PMIC AC power supply status driver" ); +MODULE_LICENSE ("GPL" );
Signature · 4 lines
Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org ? Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog