Skip to contentSkip to conversation

ARM: dts: imx6sx-sdb: update TX D_CAL for USBPHY

PATCH New Peter Chen 2 participants 5 messages Oct 31, 2016 – Nov 7, 2016

Subsystems (2)
Device tree bindings Arm i.MX and Layerscape
lore
Share & tools
lore

Peter Chen

author
#0 lore raw

PATCH 1/2 ARM: dts: imx6sx-sdb: update TX D_CAL for USBPHY

We need to change trimming value (as a percentage) of the 17.78mA TX reference current for better signal quality. With this change, we can patch the eye-diagram test on this board.

Signed-off-by Peter Chen <[email protected]>
---
 arch/arm/boot/dts/imx6sx-sdb.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)
arch/arm/boot/dts/imx6sx-sdb.dtsi +8 -0
index 85f56a5..4933c56 100644
@@ -317,6 +317,14 @@
 	status = "okay";
 };
 
+&usbphy1 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usbphy2 {
+	fsl,tx-d-cal = <106>;
+};
+
 &usdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
Signature · 1 line
2.7.4
author
#1 lore raw

PATCH 2/2 ARM: dts: imx6ul-14x14-evk: update TX D_CAL for USBPHY

We need to change trimming value (as a percentage) of the 17.78mA TX reference current for better signal quality. With this change, we can patch the eye-diagram test on this board.

Signed-off-by Peter Chen <[email protected]>
---
 arch/arm/boot/dts/imx6ul-14x14-evk.dts | 8 ++++++++
 1 file changed, 8 insertions(+)
arch/arm/boot/dts/imx6ul-14x14-evk.dts +8 -0
index 53f0cf8..1867c69 100644
@@ -233,6 +233,14 @@
 	status = "okay";
 };
 
+&usbphy1 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usbphy2 {
+	fsl,tx-d-cal = <106>;
+};
+
 &usdhc1 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc1>;
Signature · 1 line
2.7.4
#2 lore raw

PATCH 1/2 ARM: dts: imx6sx-sdb: update TX D_CAL for USBPHY

In reply to Peter Chen
Quoted 3 lines · Peter Chen

We need to change trimming value (as a percentage) of the 17.78mA TX reference current for better signal quality. With this change, we can patch the eye-diagram test on this board.

s/patch/pass? I just want to confirm this is a typo, and can fix it up when applying.

Shawn

Quoted 28 lines
Signed-off-by Peter Chen <[email protected]>
---
 arch/arm/boot/dts/imx6sx-sdb.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)
arch/arm/boot/dts/imx6sx-sdb.dtsi +8 -0
index 85f56a5..4933c56 100644
@@ -317,6 +317,14 @@
 	status = "okay";
 };
 
+&usbphy1 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usbphy2 {
+	fsl,tx-d-cal = <106>;
+};
+
 &usdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
Signature · 1 line
2.7.4
author
#3 lore raw

PATCH 1/2 ARM: dts: imx6sx-sdb: update TX D_CAL for USBPHY

Quoted 8 lines · Peter Chen
Quoted 3 lines

We need to change trimming value (as a percentage) of the 17.78mA TX reference current for better signal quality. With this change, we can patch the eye-diagram test on this board.

s/patch/pass? I just want to confirm this is a typo, and can fix it up when applying.

Thanks, Shawn. It is a typo. Help me to change both of patches please.

Peter

Applied
#4 lore raw

PATCH 1/2 ARM: dts: imx6sx-sdb: update TX D_CAL for USBPHY

Quoted 10 lines · Peter Chen
Quoted 8 lines · Peter Chen
Quoted 3 lines

We need to change trimming value (as a percentage) of the 17.78mA TX reference current for better signal quality. With this change, we can patch the eye-diagram test on this board.

s/patch/pass? I just want to confirm this is a typo, and can fix it up when applying.

Thanks, Shawn. It is a typo. Help me to change both of patches please.

Applied both, thanks.