Skip to contentSkip to conversation

configs/nanopi-neo: use a more conventional kernel

PATCH New Yann E. MORIN 2 participants 2 messages Nov 4, 2016 – Nov 5, 2016

lore
Share & tools
lore

Yann E. MORIN

author
#0 lore raw

PATCH 1/1 configs/nanopi-neo: use a more conventional kernel

It turns out that linux-4.9-rc3 has all that is needed for the NanoPi NEO, so use that rather than the franken-kernel I assembled.

Reported-by Maxime Ripard <[email protected]>
Signed-off-by "Yann E. MORIN" <[email protected]>
---
 configs/nanopi_neo_defconfig | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)
configs/nanopi_neo_defconfig +3 -4
index 2f4ea37..ba4534a 100644
@@ -11,11 +11,10 @@ BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot for the NanoPi NEO"
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/nanopi-neo/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/nanopi-neo/post-image.sh"
 
-# Use a special kernel tree until all support finally lands upstream
+# Use a -rc kernel to get the DTS
 BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_GIT=y
-BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/yann-morin-1998/linux"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="4.9-rc3-sunxi-next-2016-11-02"
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9-rc3"
 BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun8i-h3-nanopi-neo"
Signature · 1 line
2.7.4
Applied
#1 lore raw

PATCH 1/1 configs/nanopi-neo: use a more conventional kernel

Hello,

Quoted 8 lines · Yann E. MORIN

It turns out that linux-4.9-rc3 has all that is needed for the NanoPi NEO, so use that rather than the franken-kernel I assembled.

Reported-by Maxime Ripard <[email protected]>
Signed-off-by "Yann E. MORIN" <[email protected]>
---
 configs/nanopi_neo_defconfig | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

Applied to master, thanks.

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com