Skip to contentSkip to conversation

engicam: icorem6: Fix config files

PATCH In review Jagan Teki 2 participants 4 messages Oct 29, 2016 – Nov 5, 2016

lore
Share & tools
lore

Jagan Teki

author
#0 lore raw

PATCH 1/1 engicam: icorem6: Fix config files

From: Jagan Teki <[email protected]>

Config file names on MAINTAINERS and README in board/engicam/icorem6 seems to be wrong, hence fixed the same.

Cc Stefano Babic <[email protected]>
Cc Michael Trimarchi <[email protected]>
Signed-off-by Jagan Teki <[email protected]>
---
 board/engicam/icorem6/MAINTAINERS | 5 +++--
 board/engicam/icorem6/README      | 2 +-
 2 files changed, 4 insertions(+), 3 deletions(-)
board/engicam/icorem6/MAINTAINERS +3 -2
index 3e06c6b..a425afb 100644
@@ -2,5 +2,6 @@ ICOREM6QDL BOARD
 M:	Jagan Teki <[email protected]>
 S:	Maintained
 F:	board/engicam/icorem6
-F:	include/configs/icorem6qdl.h
-F:	configs/icorem6qdl_defconfig
+F:	include/configs/imx6qdl_icore.h
+F:	configs/imx6qdl_icore_mmc_defconfig
+F:	configs/imx6qdl_icore_nand_defconfig
board/engicam/icorem6/README +1 -1
index 12d1e21..e47f85f 100644
@@ -4,7 +4,7 @@ How to use U-Boot on Engicam i.CoreM6 DualLite/Solo and Quad/Dual Starter Kit:
 - Configure U-Boot for Engicam i.CoreM6 QDL:
 
 $ make mrproper
-$ make icorem6qdl_mmc_defconfig
+$ make imx6qdl_icore_mmc_defconfig
 
 - Build for i.CoreM6 DualLite/Solo
Signature · 1 line
2.7.4
author
#1 lore raw

PATCH 1/1 engicam: icorem6: Fix config files

Hi Stefano,

Quoted 31 lines · Jagan Teki

From: Jagan Teki <[email protected]>

Config file names on MAINTAINERS and README in board/engicam/icorem6 seems to be wrong, hence fixed the same.

Cc Stefano Babic <[email protected]>
Cc Michael Trimarchi <[email protected]>
Signed-off-by Jagan Teki <[email protected]>
---
 board/engicam/icorem6/MAINTAINERS | 5 +++--
 board/engicam/icorem6/README      | 2 +-
 2 files changed, 4 insertions(+), 3 deletions(-)
board/engicam/icorem6/MAINTAINERS +3 -2
index 3e06c6b..a425afb 100644
@@ -2,5 +2,6 @@ ICOREM6QDL BOARD
 M:     Jagan Teki <[email protected]>
 S:     Maintained
 F:     board/engicam/icorem6
-F:     include/configs/icorem6qdl.h
-F:     configs/icorem6qdl_defconfig
+F:     include/configs/imx6qdl_icore.h
+F:     configs/imx6qdl_icore_mmc_defconfig
+F:     configs/imx6qdl_icore_nand_defconfig
board/engicam/icorem6/README +0 -0
index 12d1e21..e47f85f 100644

board/engicam/icorem6/README How to use U-Boot on Engicam i.CoreM6 DualLite/Solo and Quad/Dual Starter Kit: · line 9

Quoted 7 lines
board/engicam/icorem6/README +1 -1
@@ -4,7 +4,7 @@ How to use U-Boot on Engicam i.CoreM6 DualLite/Solo and Quad/Dual Starter Kit:
 - Configure U-Boot for Engicam i.CoreM6 QDL:
 
 $ make mrproper
-$ make icorem6qdl_mmc_defconfig
+$ make imx6qdl_icore_mmc_defconfig
 
 - Build for i.CoreM6 DualLite/Solo

Are you planning to take this? may be I can take it along with my PR. Please let me know if you're OK?

thanks!

Signature · 4 lines
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.
#2 lore raw

PATCH 1/1 engicam: icorem6: Fix config files

Quoted 36 lines · Jagan Teki

Hi Stefano,

Quoted 33 lines · Jagan Teki

From: Jagan Teki <[email protected]>

Config file names on MAINTAINERS and README in board/engicam/icorem6 seems to be wrong, hence fixed the same.

Cc Stefano Babic <[email protected]>
Cc Michael Trimarchi <[email protected]>
Signed-off-by Jagan Teki <[email protected]>
---
 board/engicam/icorem6/MAINTAINERS | 5 +++--
 board/engicam/icorem6/README      | 2 +-
 2 files changed, 4 insertions(+), 3 deletions(-)
board/engicam/icorem6/MAINTAINERS +3 -2
index 3e06c6b..a425afb 100644
@@ -2,5 +2,6 @@ ICOREM6QDL BOARD
 M:     Jagan Teki <[email protected]>
 S:     Maintained
 F:     board/engicam/icorem6
-F:     include/configs/icorem6qdl.h
-F:     configs/icorem6qdl_defconfig
+F:     include/configs/imx6qdl_icore.h
+F:     configs/imx6qdl_icore_mmc_defconfig
+F:     configs/imx6qdl_icore_nand_defconfig
board/engicam/icorem6/README +0 -0
index 12d1e21..e47f85f 100644
@@ -4,7 +4,7 @@ How to use U-Boot on Engicam i.CoreM6 DualLite/Solo and Quad/Dual Starter Kit:
 - Configure U-Boot for Engicam i.CoreM6 QDL:
Quoted 8 lines

board/engicam/icorem6/README How to use U-Boot on Engicam i.CoreM6 DualLite/Solo and Quad/Dual Starter Kit: · line 9

Quoted 5 lines
board/engicam/icorem6/README +1 -1
 $ make mrproper
-$ make icorem6qdl_mmc_defconfig
+$ make imx6qdl_icore_mmc_defconfig
 
 - Build for i.CoreM6 DualLite/Solo

Are you planning to take this? may be I can take it along with my PR. Please let me know if you're OK?

I'll take this directly so it's in, in time, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20161105/629a90f1/attachment.sig>
#3 lore raw
In reply to Jagan Teki
Quoted 8 lines · Jagan Teki

From: Jagan Teki <[email protected]>

Config file names on MAINTAINERS and README in board/engicam/icorem6 seems to be wrong, hence fixed the same.

Cc Stefano Babic <[email protected]>
Cc Michael Trimarchi <[email protected]>
Signed-off-by Jagan Teki <[email protected]>

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20161105/d6e0ad3b/attachment.sig>