Skip to contentSkip to conversation

configs: atmel: sama5d3xek: bump to linux4sam_5.5

PATCH New Ludovic Desroches 2 participants 2 messages Nov 10, 2016 Arm/Microchip (AT91) SoC support

lore
Share & tools
lore

Ludovic Desroches

author
#0 lore raw

PATCH 1/1 configs: atmel: sama5d3xek: bump to linux4sam_5.5

Bump to linux4sam_5.5 and remove dtb variants which are no longer supported.

Signed-off-by Ludovic Desroches <[email protected]>
---
 configs/atmel_sama5d3xek_defconfig | 26 ++++++++++++++++++++------
 1 file changed, 20 insertions(+), 6 deletions(-)
configs/atmel_sama5d3xek_defconfig +20 -6
index 086c18e..c57076c 100644
@@ -1,26 +1,40 @@
+# Architecture
 BR2_arm=y
 BR2_cortex_a5=y
 BR2_ARM_ENABLE_VFP=y
 BR2_ARM_INSTRUCTIONS_THUMB2=y
-# Linux headers same as kernel, a 3.18 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_18=y
+
+# Toolchain
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_4=y
+
+# Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/linux4sam/linux-at91.git"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="03329ca4cf6b94acc5c65b59b2d1f90fdeee0887"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="linux4sam_5.5"
 BR2_LINUX_KERNEL_DEFCONFIG="sama5"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="sama5d31ek sama5d31ek_pda4 sama5d31ek_pda7 sama5d31ek_revc sama5d31ek_revc_pda4 sama5d31ek_revc_pda7 sama5d33ek sama5d33ek_pda4 sama5d33ek_pda7 sama5d33ek_revc sama5d33ek_revc_pda4 sama5d33ek_revc_pda7 sama5d34ek sama5d34ek_pda4 sama5d34ek_pda7 sama5d34ek_revc sama5d34ek_revc_pda4 sama5d34ek_revc_pda7 sama5d35ek sama5d35ek_revc sama5d36ek sama5d36ek_pda4 sama5d36ek_pda7 sama5d36ek_revc sama5d36ek_revc_pda4 sama5d36ek_revc_pda7"
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="sama5d31ek sama5d33ek sama5d34ek sama5d35ek sama5d36ek"
+
+# Filesystem
 BR2_TARGET_ROOTFS_UBIFS=y
 BR2_TARGET_ROOTFS_UBIFS_LEBSIZE=0x1f000
 BR2_TARGET_ROOTFS_UBI=y
 BR2_TARGET_ROOTFS_UBI_SUBSIZE=2048
+
+# Bootloaders
 BR2_TARGET_AT91BOOTSTRAP3=y
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git"
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.7"
 BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="sama5d3xeknf_uboot"
 BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BOARDNAME="sama5d3xek_nandflash"
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_GIT=y
 BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/linux4sam/u-boot-at91.git"
-BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="677f3c2340b72131beebace8e96cac17b9569887"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="linux4sam_5.5"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sama5d3xek_nandflash"
 BR2_TARGET_UBOOT_SPL=y
+
+# Host packages
 BR2_PACKAGE_HOST_SAM_BA=y
Signature · 1 line
2.9.0
Applied
#1 lore raw

PATCH 1/1 configs: atmel: sama5d3xek: bump to linux4sam_5.5

Hello,

Quoted 7 lines · Ludovic Desroches

Bump to linux4sam_5.5 and remove dtb variants which are no longer supported.

Signed-off-by Ludovic Desroches <[email protected]>
---
 configs/atmel_sama5d3xek_defconfig | 26 ++++++++++++++++++++------
 1 file changed, 20 insertions(+), 6 deletions(-)

Applied to master, after adding a note in the commit log that says this is needed to fix the build with gcc 5.x.

Thanks!

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com