Skip to contentSkip to conversation

ARM: dts: imx6q-cm-fx6: fix fec pinctrl

PATCH New christopher.spinrath at rwth-aachen.de 2 participants 2 messages Nov 11, 2016 – Nov 14, 2016

Subsystems (2)
Device tree bindings Arm i.MX and Layerscape
lore
Share & tools
lore

christopher.spinrath at rwth-aachen.de

author
#0 lore raw

PATCH 1/2 ARM: dts: imx6q-cm-fx6: fix fec pinctrl

From: Christopher Spinrath <[email protected]>

According to the schematics of CompuLab's sbc-fx6 baseboard and the vendor devicetree GPIO_16 is *not* muxed to ENET_REF_CLK but to SPDIF_IN.

Remove the wrong pinctrl setting.

Fixes 682d055e6ac5 ("ARM: dts: Add initial support for cm-fx6.")
Signed-off-by Christopher Spinrath <[email protected]>
---
 arch/arm/boot/dts/imx6q-cm-fx6.dts | 1 -
 1 file changed, 1 deletion(-)
arch/arm/boot/dts/imx6q-cm-fx6.dts +0 -1
index 59bc5a4..a150bca 100644
@@ -183,7 +183,6 @@
 			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
 			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
 		>;
 	};
Signature · 1 line
2.10.2
Applied
#1 lore raw

PATCH 1/2 ARM: dts: imx6q-cm-fx6: fix fec pinctrl

Quoted 9 lines · christopher.spinrath at rwth-aachen.de

From: Christopher Spinrath <[email protected]>

According to the schematics of CompuLab's sbc-fx6 baseboard and the vendor devicetree GPIO_16 is *not* muxed to ENET_REF_CLK but to SPDIF_IN.

Remove the wrong pinctrl setting.

Fixes 682d055e6ac5 ("ARM: dts: Add initial support for cm-fx6.")
Signed-off-by Christopher Spinrath <[email protected]>

Applied both, thanks.