Problem with disabling sysvinit service
Dear All,
Maybe here I would find answer to question which puzzles me from some time.
The problem:
Disable syslog service on startup of sysvinit based board. (syslog is defined in e.g. /etc/rc5.d/S20syslog -> /etc/init.d/syslog)
Syslog on my setup is provided by busybox.
I was trying to find where 'update-rc.d ... syslog ...' is called in the poky (2.1.2) source tree but without any success.
Then, I've discovered that it is appended to INITSCRIPT_NAME variable and further processed by update-rc.d.bbclass
Is there any method/recipe which would allow just removing S20klogd symlink from /etc/rcX.d from the created rootfs?
The goal is to have syslog installed (in this case built into busybox), but disabled at boot up time.
Any help is more than welcome.
Tanks in advance,
Łukasz Majewski
Quoted 15 lines · Lukasz Majewski
Dear All,
Maybe here I would find answer to question which puzzles me from some time.
The problem:
Disable syslog service on startup of sysvinit based board. (syslog is defined in e.g.
/etc/rc5.d/S20syslog->/etc/init.d/syslog)Syslog on my setup is provided by busybox.
I was trying to find where 'update-rc.d ... syslog ...' is called in the poky (2.1.2) source tree but without any success.
Quoted 8 lines
Then, I've discovered that it is appended to
INITSCRIPT_NAMEvariable and further processed by update-rc.d.bbclassIs there any method/recipe which would allow just removing S20klogd symlink from
/etc/rcX.dfrom the created rootfs?
You should be able to modify (append) the busybox recipe to not create the symlinks in the first place. I'm not 100% sure what the correct line is but INITSCRIPT_PARAMS is the variable you want to modify. Maybe something like this?
INITSCRIPT_PARAMS_${PN}-syslog = "start 80 . stop 20 0 1 6 ."
(that should be the default except with all start runlevels removed)
- Jussi
Quoted 15 lines
The goal is to have syslog installed (in this case built into busybox), but disabled at boot up time.
Any help is more than welcome.
Tanks in advance,
Łukasz Majewski--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Hi Jussi,
Quoted 32 lines
Quoted 16 lines · Lukasz Majewski
Dear All,
Maybe here I would find answer to question which puzzles me from some time.
The problem:
Disable syslog service on startup of sysvinit based board. (syslog is defined in e.g.
/etc/rc5.d/S20syslog->/etc/init.d/syslog)Syslog on my setup is provided by busybox.
I was trying to find where 'update-rc.d ... syslog ...' is called in the poky (2.1.2) source tree but without any success.
Quoted 8 lines
Then, I've discovered that it is appended to
INITSCRIPT_NAMEvariable and further processed by update-rc.d.bbclassIs there any method/recipe which would allow just removing S20klogd symlink from
/etc/rcX.dfrom the created rootfs?You should be able to modify (append) the busybox recipe to not create the symlinks in the first place. I'm not 100% sure what the correct line is but
INITSCRIPT_PARAMSis the variable you want to modify. Maybe something like this?
Quoted 6 lines
INITSCRIPT_PARAMS_${PN}-syslog = "start 80 . stop 20 0 1 6 ."
(that should be the default except with all start runlevels removed)
- Jussi
Thanks for advice.
I've also thought about extending image.bbclass
to put function between do_rootfs and do_build.
In this way I could run update-rc.d in it.
Anyway, I will test your solution.
Thanks and best regards,
Łukasz Majewski
Quoted 17 lines
Quoted 17 lines
The goal is to have syslog installed (in this case built into busybox), but disabled at boot up time.
Any help is more than welcome.
Tanks in advance,
Łukasz Majewski--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto