Skip to contentSkip to conversation

drm/fsl-dcu: remove separate compilation unit for fbdev emulation

PATCH In review Stefan Agner 1 participant 3 messages Nov 17, 2016 – Nov 29, 2016

Subsystems (3)
lore
Share & tools
lore

Stefan Agner

author maintainer
#0 lore raw

PATCH 1/2 drm/fsl-dcu: remove separate compilation unit for fbdev emulation

The separate file fsl_dcu_drm_fbdev.c only initialized fbdev emulation which is a one-line operation. There is not much more code on sight which justifies a separate file, hence call the initialization helper directly from the drv file.

---
 drivers/gpu/drm/fsl-dcu/Makefile            |  1 -
 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c   |  2 +-
 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h   |  1 -
 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_fbdev.c | 23 -----------------------
 4 files changed, 1 insertion(+), 26 deletions(-)
 delete mode 100644 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_fbdev.c
drivers/gpu/drm/fsl-dcu/Makefile +0 -1
index b35a292..aca34f6 100644
@@ -3,6 +3,5 @@ fsl-dcu-drm-y := fsl_dcu_drm_drv.o \
 		 fsl_dcu_drm_rgb.o \
 		 fsl_dcu_drm_plane.o \
 		 fsl_dcu_drm_crtc.o \
-		 fsl_dcu_drm_fbdev.o \
 		 fsl_tcon.o
 obj-$(CONFIG_DRM_FSL_DCU)	+= fsl-dcu-drm.o
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c +1 -1
index 13569b8..c3c9349 100644
@@ -85,7 +85,7 @@ static int fsl_dcu_load(struct drm_device *dev, unsigned long flags)
 		goto done;
 	dev->irq_enabled = true;
 
-	fsl_dcu_fbdev_init(dev);
+	fsl_dev->fbdev = drm_fbdev_cma_init(dev, 24, 1, 1);
 
 	return 0;
 done:
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h +0 -1
index 3b371fe7..e9e9aee 100644
@@ -197,7 +197,6 @@ struct fsl_dcu_drm_device {
 	struct drm_atomic_state *state;
 };
 
-void fsl_dcu_fbdev_init(struct drm_device *dev);
 int fsl_dcu_drm_modeset_init(struct fsl_dcu_drm_device *fsl_dev);
 
 #endif /* __FSL_DCU_DRM_DRV_H__ */
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_fbdev.c deleted +0 -23
deleted file mode 100644
index 8b8b819..0000000
@@ -1,23 +0,0 @@
-/*
- * Copyright 2015 Freescale Semiconductor, Inc.
- *
- * Freescale DCU drm device driver
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <drm/drmP.h>
-#include <drm/drm_fb_cma_helper.h>
-
-#include "fsl_dcu_drm_drv.h"
-
-/* initialize fbdev helper */
-void fsl_dcu_fbdev_init(struct drm_device *dev)
-{
-	struct fsl_dcu_drm_device *fsl_dev = dev_get_drvdata(dev->dev);
-
-	fsl_dev->fbdev = drm_fbdev_cma_init(dev, 24, 1, 1);
-}
Signature · 6 lines
2.10.2

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#1 lore raw

PATCH 2/2 drm/fsl-dcu: introduce kernel parameter to specify fbdev depth

Add a kernel parameter legancyfb_depth (like the i.MX drm driver) to control the legancy fbdev depth. Default to the so far hard coded depth of 24-bit. Currently changing the framebuffer depth is not possible from user space when using the fbdev emulation layer... This provides a rudimentary mechanism to change depth without having to change kernel code.

---
 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c +15 -1
index c3c9349..537ca15 100644
@@ -32,6 +32,9 @@
 #include "fsl_dcu_drm_drv.h"
 #include "fsl_tcon.h"
 
+static int legacyfb_depth = 24;
+module_param(legacyfb_depth, int, 0444);
+
 static bool fsl_dcu_drm_is_volatile_reg(struct device *dev, unsigned int reg)
 {
 	if (reg == DCU_INT_STATUS || reg == DCU_UPDATE_MODE)
@@ -85,7 +88,18 @@ static int fsl_dcu_load(struct drm_device *dev, unsigned long flags)
 		goto done;
 	dev->irq_enabled = true;
 
-	fsl_dev->fbdev = drm_fbdev_cma_init(dev, 24, 1, 1);
+	if (legacyfb_depth != 16 && legacyfb_depth != 24 &&
+	    legacyfb_depth != 32) {
+		dev_warn(dev->dev,
+			"Invalid legacyfb_depth.  Defaulting to 24bpp\n");
+		legacyfb_depth = 24;
+	}
+	fsl_dev->fbdev = drm_fbdev_cma_init(dev, legacyfb_depth, 1, 1);
+	if (IS_ERR(fsl_dev->fbdev)) {
+		ret = PTR_ERR(fsl_dev->fbdev);
+		fsl_dev->fbdev = NULL;
+		goto done;
+	}
 
 	return 0;
 done:
Signature · 1 line
2.10.2
author maintainer
#2 lore raw
In reply to Stefan Agner
Quoted 4 lines · Stefan Agner

The separate file fsl_dcu_drm_fbdev.c only initialized fbdev emulation which is a one-line operation. There is not much more code on sight which justifies a separate file, hence call the initialization helper directly from the drv file.

Both applied to my for-next branch.

Quoted 69 lines
---
 drivers/gpu/drm/fsl-dcu/Makefile            |  1 -
 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c   |  2 +-
 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h   |  1 -
 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_fbdev.c | 23 -----------------------
 4 files changed, 1 insertion(+), 26 deletions(-)
 delete mode 100644 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_fbdev.c
drivers/gpu/drm/fsl-dcu/Makefile +0 -1
index b35a292..aca34f6 100644
@@ -3,6 +3,5 @@ fsl-dcu-drm-y := fsl_dcu_drm_drv.o \
 		 fsl_dcu_drm_rgb.o \
 		 fsl_dcu_drm_plane.o \
 		 fsl_dcu_drm_crtc.o \
-		 fsl_dcu_drm_fbdev.o \
 		 fsl_tcon.o
 obj-$(CONFIG_DRM_FSL_DCU)	+= fsl-dcu-drm.o
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c +1 -1
index 13569b8..c3c9349 100644
@@ -85,7 +85,7 @@ static int fsl_dcu_load(struct drm_device *dev,
 unsigned long flags)
 		goto done;
 	dev->irq_enabled = true;
 
-	fsl_dcu_fbdev_init(dev);
+	fsl_dev->fbdev = drm_fbdev_cma_init(dev, 24, 1, 1);
 
 	return 0;

done:

drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h +0 -1
index 3b371fe7..e9e9aee 100644
@@ -197,7 +197,6 @@ struct fsl_dcu_drm_device {
 	struct drm_atomic_state *state;
 };
 
-void fsl_dcu_fbdev_init(struct drm_device *dev);
 int fsl_dcu_drm_modeset_init(struct fsl_dcu_drm_device *fsl_dev);
 
 #endif /* __FSL_DCU_DRM_DRV_H__ */
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_fbdev.c deleted +0 -13
deleted file mode 100644
index 8b8b819..0000000
@@ -1,23 +0,0 @@
-/*
- * Copyright 2015 Freescale Semiconductor, Inc.
- *
- * Freescale DCU drm device driver
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <drm/drmP.h>
-#include <drm/drm_fb_cma_helper.h>

drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_fbdev.c line 23

Quoted 10 lines
drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_fbdev.c deleted +0 -10
-
-#include "fsl_dcu_drm_drv.h"
-
-/* initialize fbdev helper */
-void fsl_dcu_fbdev_init(struct drm_device *dev)
-{
-	struct fsl_dcu_drm_device *fsl_dev = dev_get_drvdata(dev->dev);
-
-	fsl_dev->fbdev = drm_fbdev_cma_init(dev, 24, 1, 1);
-}

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel