systemd-boot: Remove old gummiboot recipe, class and wks file

deleted file mode 100644
index 4f2dea6..0000000
@@ -1,121 +0,0 @@
-# Copyright (C) 2014 Intel Corporation
-#
-# Released under the MIT license (see COPYING.MIT)
-
-# gummiboot.bbclass - equivalent of grub-efi.bbclass
-# Set EFI_PROVIDER = "gummiboot" to use gummiboot on your live images instead of grub-efi
-# (images built by image-live.bbclass or image-vm.bbclass)
-
-do_bootimg[depends] += "${MLPREFIX}gummiboot:do_deploy"
-do_bootdirectdisk[depends] += "${MLPREFIX}gummiboot:do_deploy"
-
-EFIDIR = "/EFI/BOOT"
-
-GUMMIBOOT_CFG ?= "${S}/loader.conf"
-GUMMIBOOT_ENTRIES ?= ""
-GUMMIBOOT_TIMEOUT ?= "10"
-
-# Need UUID utility code.
-inherit fs-uuid
-
-efi_populate() {
-        DEST=$1
-
-        EFI_IMAGE="gummibootia32.efi"
-        DEST_EFI_IMAGE="bootia32.efi"
-        if [ "${TARGET_ARCH}" = "x86_64" ]; then
-            EFI_IMAGE="gummibootx64.efi"
-            DEST_EFI_IMAGE="bootx64.efi"
-        fi
-
-        install -d ${DEST}${EFIDIR}
-        # gummiboot requires these paths for configuration files
-        # they are not customizable so no point in new vars
-        install -d ${DEST}/loader
-        install -d ${DEST}/loader/entries
-        install -m 0644 ${DEPLOY_DIR_IMAGE}/${EFI_IMAGE} ${DEST}${EFIDIR}/${DEST_EFI_IMAGE}
-        EFIPATH=$(echo "${EFIDIR}" | sed 's/\//\\/g')
-        printf 'fs0:%s\%s\n' "$EFIPATH" "$DEST_EFI_IMAGE" >${DEST}/startup.nsh
-        install -m 0644 ${GUMMIBOOT_CFG} ${DEST}/loader/loader.conf
-        for i in ${GUMMIBOOT_ENTRIES}; do
-            install -m 0644 ${i} ${DEST}/loader/entries
-        done
-}
-
-efi_iso_populate() {
-        iso_dir=$1
-        efi_populate $iso_dir
-        mkdir -p ${EFIIMGDIR}/${EFIDIR}
-        cp $iso_dir/${EFIDIR}/* ${EFIIMGDIR}${EFIDIR}
-        cp $iso_dir/vmlinuz ${EFIIMGDIR}
-        EFIPATH=$(echo "${EFIDIR}" | sed 's/\//\\/g')
-        echo "fs0:${EFIPATH}\\${DEST_EFI_IMAGE}" > ${EFIIMGDIR}/startup.nsh
-        if [ -f "$iso_dir/initrd" ] ; then
-            cp $iso_dir/initrd ${EFIIMGDIR}
-        fi
-}
-
-efi_hddimg_populate() {
-        efi_populate $1
-}
-
-python build_efi_cfg() {
-    s = d.getVar("S", True)
-    labels = d.getVar('LABELS', True)
-    if not labels:
-        bb.debug(1, "LABELS not defined, nothing to do")
-        return
-
-    if labels == []:
-        bb.debug(1, "No labels, nothing to do")
-        return
-
-    cfile = d.getVar('GUMMIBOOT_CFG', True)
-    try:
-         cfgfile = open(cfile, 'w')
-    except OSError:
-        bb.fatal('Unable to open %s' % cfile)
-
-    cfgfile.write('# Automatically created by OE\n')
-    cfgfile.write('default %s\n' % (labels.split()[0]))
-    timeout = d.getVar('GUMMIBOOT_TIMEOUT', True)
-    if timeout:
-        cfgfile.write('timeout %s\n' % timeout)
-    else:
-        cfgfile.write('timeout 10\n')
-    cfgfile.close()
-
-    for label in labels.split():
-        localdata = d.createCopy()
-
-        overrides = localdata.getVar('OVERRIDES', True)
-        if not overrides:
-            bb.fatal('OVERRIDES not defined')
-
-        entryfile = "%s/%s.conf" % (s, label)
-        d.appendVar("GUMMIBOOT_ENTRIES", " " + entryfile)
-        try:
-            entrycfg = open(entryfile, "w")
-        except OSError:
-            bb.fatal('Unable to open %s' % entryfile)
-        localdata.setVar('OVERRIDES', label + ':' + overrides)
-        bb.data.update_data(localdata)
-
-        entrycfg.write('title %s\n' % label)
-        entrycfg.write('linux /vmlinuz\n')
-
-        append = localdata.getVar('APPEND', True)
-        initrd = localdata.getVar('INITRD', True)
-
-        if initrd:
-            entrycfg.write('initrd /initrd\n')
-        lb = label
-        if label == "install":
-            lb = "install-efi"
-        entrycfg.write('options LABEL=%s ' % lb)
-        if append:
-            append = replace_rootfs_uuid(d, append)
-            entrycfg.write('%s' % append)
-        entrycfg.write('\n')
-        entrycfg.close()
-}

74 lines not on this page · raw message

45 lines not on this page · raw message

deleted file mode 100644
index c684b83..0000000
@@ -1,39 +0,0 @@
-SUMMARY = "Gummiboot is a simple UEFI boot manager which executes configured EFI images."
-HOMEPAGE = "http://freedesktop.org/wiki/Software/gummiboot"
-
-LICENSE = "LGPLv2.1"
-LIC_FILES_CHKSUM = "file://LICENSE;md5=4fbd65380cdd255951079008b364516c"
-
-DEPENDS = "gnu-efi util-linux"
-
-inherit autotools pkgconfig manpages
-inherit deploy
-
-PV = "48+git${SRCPV}"
-SRCREV = "2bcd919c681c952eb867ef1bdb458f1bc49c2d55"
-SRC_URI = "git://anongit.freedesktop.org/gummiboot \
-           file://fix-objcopy.patch \
-           file://0001-console-Fix-C-syntax-errors-for-function-declaration.patch \
-          "
-
-PACKAGECONFIG[manpages] = "--enable-manpages, --disable-manpages, libxslt-native xmlto-native"
-
-# Note: Add COMPATIBLE_HOST here is only because it depends on gnu-efi
-# which has set the COMPATIBLE_HOST, the gummiboot itself may work on
-# more hosts.
-COMPATIBLE_HOST = "(x86_64.*|i.86.*)-linux"
-
-S = "${WORKDIR}/git"
-
-EXTRA_OECONF = "--with-efi-includedir=${STAGING_INCDIR} \
-                --with-efi-ldsdir=${STAGING_LIBDIR} \
-                --with-efi-libdir=${STAGING_LIBDIR}"
-
-EXTRA_OEMAKE += "gummibootlibdir=${libdir}/gummiboot"
-
-TUNE_CCARGS_remove = "-mfpmath=sse"
-
-do_deploy () {
-        install ${B}/gummiboot*.efi ${DEPLOYDIR}
-}
-addtask deploy before do_build after do_compile

deleted file mode 100644
index f3ae090..0000000
@@ -1,11 +0,0 @@
-# short-description: Create an EFI disk image
-# long-description: Creates a partitioned EFI disk image that the user
-# can directly dd to boot media.
-
-part /boot --source bootimg-efi --sourceparams="loader=gummiboot" --ondisk sda --label msdos --active --align 1024
-
-part / --source rootfs --ondisk sda --fstype=ext4 --label platform --align 1024
-
-part swap --ondisk sda --size 44 --label swap1 --fstype=swap
-
-bootloader --ptable gpt --timeout=5  --append="rootwait rootfstype=ext4 console=ttyS0,115200 console=tty0"