Skip to contentSkip to conversation

iio: 104-quad-8: Fix active level mismatch for the preset enable option

PATCH Applied William Breathitt Gray 2 participants 2 messages Nov 29, 2016 – Dec 3, 2016 IIO

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 iio: 104-quad-8: Fix active level mismatch for the preset enable option

The set_to_preset_on_index sysfs attribute provides a boolean configuration option to enable a preset operation on the respective channel's counter when Index occurs. However, the corresponding configuration bit on the Input/Output Control register must be set low to enable the preset operation.

This patch inverts the internal driver boolean logic exposed via the set_to_preset_on_index attribute in order to correctly configure the device which expects an active low bit.

Fixes 28e5d3bb0325 ("iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8")
---
 drivers/iio/counter/104-quad-8.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/iio/counter/104-quad-8.c +4 -1
index 2d2ee35..9847221 100644
@@ -233,7 +233,7 @@ static ssize_t quad8_read_set_to_preset_on_index(struct iio_dev *indio_dev,
 	const struct quad8_iio *const priv = iio_priv(indio_dev);
 
 	return snprintf(buf, PAGE_SIZE, "%u\n",
-		priv->preset_enable[chan->channel]);
+		!priv->preset_enable[chan->channel]);
 }
 
 static ssize_t quad8_write_set_to_preset_on_index(struct iio_dev *indio_dev,
@@ -250,6 +250,9 @@ static ssize_t quad8_write_set_to_preset_on_index(struct iio_dev *indio_dev,
 	if (ret)
 		return ret;
 
+	/* Preset enable is active low in Input/Output Control register */
+	preset_enable = !preset_enable;
+
 	priv->preset_enable[chan->channel] = preset_enable;
 
 	ior_cfg = priv->ab_enable[chan->channel] |
Signature · 1 line
2.10.2
maintainer Applied
#1 lore raw
Quoted 6 lines · William Breathitt Gray

The set_to_preset_on_index sysfs attribute provides a boolean configuration option to enable a preset operation on the respective channel's counter when Index occurs. However, the corresponding configuration bit on the Input/Output Control register must be set low to enable the preset operation.

Quoted 6 lines

This patch inverts the internal driver boolean logic exposed via the set_to_preset_on_index attribute in order to correctly configure the device which expects an active low bit.

Fixes 28e5d3bb0325 ("iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8")

Applied to the fixes-togreg-post-rc1 branch and marked for stable.

Thanks,

Jonathan

Quoted 28 lines
---
 drivers/iio/counter/104-quad-8.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/iio/counter/104-quad-8.c +4 -1
index 2d2ee35..9847221 100644
@@ -233,7 +233,7 @@ static ssize_t quad8_read_set_to_preset_on_index(struct iio_dev *indio_dev,
 	const struct quad8_iio *const priv = iio_priv(indio_dev);
 
 	return snprintf(buf, PAGE_SIZE, "%u\n",
-		priv->preset_enable[chan->channel]);
+		!priv->preset_enable[chan->channel]);
 }
 
 static ssize_t quad8_write_set_to_preset_on_index(struct iio_dev *indio_dev,
@@ -250,6 +250,9 @@ static ssize_t quad8_write_set_to_preset_on_index(struct iio_dev *indio_dev,
 	if (ret)
 		return ret;
 
+	/* Preset enable is active low in Input/Output Control register */
+	preset_enable = !preset_enable;
+
 	priv->preset_enable[chan->channel] = preset_enable;
 
 	ior_cfg = priv->ab_enable[chan->channel] |