isdn/gigaset: use designated initializers
Subsystems (2)
PATCH 1/1 isdn/gigaset: use designated initializers
Prepare to mark sensitive kernel structures for randomization by making sure they're using designated initializers. These were identified during allyesconfig builds of x86, arm, and arm64, with most initializer fixes extracted from grsecurity.
Signed-off-by Kees Cook <[email protected]>
--- drivers/isdn/gigaset/bas-gigaset.c | 32 ++++++++++++++++---------------- drivers/isdn/gigaset/ser-gigaset.c | 32 ++++++++++++++++---------------- drivers/isdn/gigaset/usb-gigaset.c | 32 ++++++++++++++++---------------- 3 files changed, 48 insertions(+), 48 deletions(-)
drivers/isdn/gigaset/bas-gigaset.c +16 -16
@@ -2565,22 +2565,22 @@ static int gigaset_post_reset(struct usb_interface *intf)static const struct gigaset_ops gigops = { - gigaset_write_cmd, - gigaset_write_room, - gigaset_chars_in_buffer, - gigaset_brkchars, - gigaset_init_bchannel, - gigaset_close_bchannel, - gigaset_initbcshw, - gigaset_freebcshw, - gigaset_reinitbcshw, - gigaset_initcshw, - gigaset_freecshw, - gigaset_set_modem_ctrl, - gigaset_baud_rate, - gigaset_set_line_ctrl, - gigaset_isoc_send_skb, - gigaset_isoc_input, + .write_cmd = gigaset_write_cmd, + .write_room = gigaset_write_room, + .chars_in_buffer = gigaset_chars_in_buffer, + .brkchars = gigaset_brkchars, + .init_bchannel = gigaset_init_bchannel, + .close_bchannel = gigaset_close_bchannel, + .initbcshw = gigaset_initbcshw, + .freebcshw = gigaset_freebcshw, + .reinitbcshw = gigaset_reinitbcshw, + .initcshw = gigaset_initcshw, + .freecshw = gigaset_freecshw, + .set_modem_ctrl = gigaset_set_modem_ctrl, + .baud_rate = gigaset_baud_rate, + .set_line_ctrl = gigaset_set_line_ctrl, + .send_skb = gigaset_isoc_send_skb, + .handle_input = gigaset_isoc_input, };/* bas_gigaset_init
drivers/isdn/gigaset/ser-gigaset.c +16 -16
@@ -445,22 +445,22 @@ static int gigaset_set_line_ctrl(struct cardstate *cs, unsigned cflag) }static const struct gigaset_ops ops = { - gigaset_write_cmd, - gigaset_write_room, - gigaset_chars_in_buffer, - gigaset_brkchars, - gigaset_init_bchannel, - gigaset_close_bchannel, - gigaset_initbcshw, - gigaset_freebcshw, - gigaset_reinitbcshw, - gigaset_initcshw, - gigaset_freecshw, - gigaset_set_modem_ctrl, - gigaset_baud_rate, - gigaset_set_line_ctrl, - gigaset_m10x_send_skb,/* asyncdata.c */ - gigaset_m10x_input,/* asyncdata.c */ + .write_cmd = gigaset_write_cmd, + .write_room = gigaset_write_room, + .chars_in_buffer = gigaset_chars_in_buffer, + .brkchars = gigaset_brkchars, + .init_bchannel = gigaset_init_bchannel, + .close_bchannel = gigaset_close_bchannel, + .initbcshw = gigaset_initbcshw, + .freebcshw = gigaset_freebcshw, + .reinitbcshw = gigaset_reinitbcshw, + .initcshw = gigaset_initcshw, + .freecshw = gigaset_freecshw, + .set_modem_ctrl = gigaset_set_modem_ctrl, + .baud_rate = gigaset_baud_rate, + .set_line_ctrl = gigaset_set_line_ctrl, + .send_skb = gigaset_m10x_send_skb,/* asyncdata.c */ + .handle_input = gigaset_m10x_input,/* asyncdata.c */ };
drivers/isdn/gigaset/usb-gigaset.c +16 -16
@@ -862,22 +862,22 @@ static int gigaset_pre_reset(struct usb_interface *intf) }static const struct gigaset_ops ops = { - gigaset_write_cmd, - gigaset_write_room, - gigaset_chars_in_buffer, - gigaset_brkchars, - gigaset_init_bchannel, - gigaset_close_bchannel, - gigaset_initbcshw, - gigaset_freebcshw, - gigaset_reinitbcshw, - gigaset_initcshw, - gigaset_freecshw, - gigaset_set_modem_ctrl, - gigaset_baud_rate, - gigaset_set_line_ctrl, - gigaset_m10x_send_skb, - gigaset_m10x_input, + .write_cmd = gigaset_write_cmd, + .write_room = gigaset_write_room, + .chars_in_buffer = gigaset_chars_in_buffer, + .brkchars = gigaset_brkchars, + .init_bchannel = gigaset_init_bchannel, + .close_bchannel = gigaset_close_bchannel, + .initbcshw = gigaset_initbcshw, + .freebcshw = gigaset_freebcshw, + .reinitbcshw = gigaset_reinitbcshw, + .initcshw = gigaset_initcshw, + .freecshw = gigaset_freecshw, + .set_modem_ctrl = gigaset_set_modem_ctrl, + .baud_rate = gigaset_baud_rate, + .set_line_ctrl = gigaset_set_line_ctrl, + .send_skb = gigaset_m10x_send_skb, + .handle_input = gigaset_m10x_input, };/*
Signature · 6 lines
2.7.4 -- Kees Cook Nexus Security
From: Kees Cook <[email protected]>
Date: Fri, 16 Dec 2016 16:58:06 -0800
Quoted 6 lines
Prepare to mark sensitive kernel structures for randomization by making sure they're using designated initializers. These were identified during allyesconfig builds of x86, arm, and arm64, with most initializer fixes extracted from grsecurity.
Signed-off-by Kees Cook <[email protected]>
Applied.