ARM: dts: boundary: remove hardcoded LVDS bus format
Subsystems (2)
cover ARM: dts: boundary: remove hardcoded LVDS bus format
Hi all,
This series removes the hardcoded bus format for the LVDS display nodes of our platforms.
The reason is that our latest 7" display uses a 24-bit interface and therefore can't work properly without this series.
https://patchwork.kernel.org/patch/9458053/
Regards,
Gary
Gary Bisson (5):
ARM: dts: imx6qdl-nit6xlite: remove hardcoded LVDS bus format
ARM: dts: imx6qdl-nitrogen6_max: remove hardcoded LVDS bus format
ARM: dts: imx6qdl-nitrogen6_som2: remove hardcoded LVDS bus format
ARM: dts: imx6qdl-nitrogen6x: remove hardcoded LVDS bus format
ARM: dts: imx6qdl-sabrelite: remove hardcoded LVDS bus format
arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi | 2 -- arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi | 4 ---- arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi | 2 -- arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 2 -- arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 2 -- 5 files changed, 12 deletions(-)
Signature · 1 line
2.9.3
PATCH 1/5 ARM: dts: imx6qdl-nit6xlite: remove hardcoded LVDS bus format
The bus format is therefore retrieved from the connected panel information.
--- arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi | 2 -- 1 file changed, 2 deletions(-)
arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi +0 -2
@@ -515,8 +515,6 @@ status = "okay"; lvds-channel at 0 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; status = "okay"; port at 4 {
Signature · 1 line
2.9.3
PATCH 2/5 ARM: dts: imx6qdl-nitrogen6_max: remove hardcoded LVDS bus format
In reply to Gary BissonThe bus format is therefore retrieved from the connected panel information.
--- arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi | 4 ---- 1 file changed, 4 deletions(-)
arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi +0 -4
@@ -739,8 +739,6 @@ status = "okay"; lvds-channel at 0 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; status = "okay"; port at 4 {
@@ -753,8 +751,6 @@ }; lvds-channel at 1 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; status = "okay"; port at 4 {
Signature · 1 line
2.9.3
PATCH 3/5 ARM: dts: imx6qdl-nitrogen6_som2: remove hardcoded LVDS bus format
In reply to Gary BissonThe bus format is therefore retrieved from the connected panel information.
--- arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi | 2 -- 1 file changed, 2 deletions(-)
arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi +0 -2
@@ -640,8 +640,6 @@ status = "okay"; lvds-channel at 0 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; status = "okay"; port at 4 {
Signature · 1 line
2.9.3
PATCH 4/5 ARM: dts: imx6qdl-nitrogen6x: remove hardcoded LVDS bus format
In reply to Gary BissonThe bus format is therefore retrieved from the connected panel information.
--- arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 2 -- 1 file changed, 2 deletions(-)
arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +0 -2
@@ -579,8 +579,6 @@ status = "okay"; lvds-channel at 0 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; status = "okay"; port at 4 {
Signature · 1 line
2.9.3
PATCH 5/5 ARM: dts: imx6qdl-sabrelite: remove hardcoded LVDS bus format
In reply to Gary BissonThe bus format is therefore retrieved from the connected panel information.
--- arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 2 -- 1 file changed, 2 deletions(-)
arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +0 -2
@@ -525,8 +525,6 @@ status = "okay"; lvds-channel at 0 { - fsl,data-mapping = "spwg"; - fsl,data-width = <18>; status = "okay"; port at 4 {
Signature · 1 line
2.9.3
cover ARM: dts: boundary: remove hardcoded LVDS bus format
In reply to Gary BissonQuoted 6 lines · Gary Bisson
Gary Bisson (5):
ARM: dts: imx6qdl-nit6xlite: remove hardcoded LVDS bus format
ARM: dts: imx6qdl-nitrogen6_max: remove hardcoded LVDS bus format
ARM: dts: imx6qdl-nitrogen6_som2: remove hardcoded LVDS bus format
ARM: dts: imx6qdl-nitrogen6x: remove hardcoded LVDS bus format
ARM: dts: imx6qdl-sabrelite: remove hardcoded LVDS bus format
I squashed them and applied, thanks.
Shawn