Lirc staging drivers

index 05e20aa..fdd6e7f 100644
@@ -485,15 +485,15 @@ static struct pwm_omap_dmtimer_pdata pwm_dmtimer_pdata = {
 };
 #endif
 
-static struct lirc_rx51_platform_data __maybe_unused rx51_lirc_data = {
+static struct ir_rx51_platform_data __maybe_unused rx51_ir_data = {
 	.set_max_mpu_wakeup_lat = omap_pm_set_max_mpu_wakeup_lat,
 };
 
-static struct platform_device __maybe_unused rx51_lirc_device = {
-	.name           = "lirc_rx51",
+static struct platform_device __maybe_unused rx51_ir_device = {
+	.name           = "ir_rx51",
 	.id             = -1,
 	.dev            = {
-		.platform_data = &rx51_lirc_data,
+		.platform_data = &rx51_ir_data,
 	},
 };
 

496 lines not on this page · raw message

index 812d873..2c94ab5 100644
@@ -1,7 +1,7 @@
-#ifndef _LIRC_RX51_H
-#define _LIRC_RX51_H
+#ifndef _IR_RX51_H
+#define _IR_RX51_H
 
-struct lirc_rx51_platform_data {
+struct ir_rx51_platform_data {
 	int(*set_max_mpu_wakeup_lat)(struct device *dev, long t);
 };
 

472 lines not on this page · raw message

741 lines not on this page · raw message

deleted file mode 100644
index 4bed6af..0000000
@@ -1,26 +0,0 @@
-/* lirc_parallel.h */
-
-#ifndef _LIRC_PARALLEL_H
-#define _LIRC_PARALLEL_H
-
-#include <linux/lp.h>
-
-#define LIRC_PORT_LEN 3
-
-#define LIRC_LP_BASE    0
-#define LIRC_LP_STATUS  1
-#define LIRC_LP_CONTROL 2
-
-#define LIRC_PORT_DATA           LIRC_LP_BASE    /* base */
-#define LIRC_PORT_TIMER        LIRC_LP_STATUS    /* status port */
-#define LIRC_PORT_TIMER_BIT          LP_PBUSY    /* busy signal */
-#define LIRC_PORT_SIGNAL       LIRC_LP_STATUS    /* status port */
-#define LIRC_PORT_SIGNAL_BIT          LP_PACK    /* ack signal */
-#define LIRC_PORT_IRQ         LIRC_LP_CONTROL    /* control port */
-
-#define LIRC_SFH506_DELAY 0             /* delay t_phl in usecs */
-
-#define LIRC_PARALLEL_MAX_TRANSMITTERS 8
-#define LIRC_PARALLEL_TRANSMITTER_MASK ((1<<LIRC_PARALLEL_MAX_TRANSMITTERS) - 1)
-
-#endif

401 lines not on this page · raw message

index 4234ae6..af5926f 100644
@@ -96,6 +96,7 @@ struct imon_usb_dev_descr {
 	__u16 flags;
 #define IMON_NO_FLAGS 0
 #define IMON_NEED_20MS_PKT_DELAY 1
+#define IMON_IR_RAW 2
 	struct imon_panel_key_table key_table[];
 };
 

@@ -126,6 +127,12 @@ struct imon_context {
 	unsigned char usb_tx_buf[8];
 	unsigned int send_packet_delay;
 
+	struct rx_data {
+		int count;		/* length of 0 or 1 sequence */
+		int prev_bit;		/* logic level of sequence */
+		int initial_space;	/* initial space flag */
+	} rx;
+
 	struct tx_t {
 		unsigned char data_buf[35];	/* user data buffer */
 		struct completion finished;	/* wait for write to finish */

@@ -328,6 +335,10 @@ static const struct imon_usb_dev_descr imon_DH102 = {
 	}
 };
 
+static const struct imon_usb_dev_descr imon_ir_raw = {
+	.flags = IMON_IR_RAW,
+};
+
 /*
  * USB Device ID for iMON USB Control Boards
  *

@@ -411,6 +422,18 @@ static struct usb_device_id imon_usb_id_table[] = {
 	/* device specifics unknown */
 	{ USB_DEVICE(0x15c2, 0x0046),
 	  .driver_info = (unsigned long)&imon_default_table},
+	/* TriGem iMON (IR only) -- TG_iMON.inf */
+	{ USB_DEVICE(0x0aa8, 0x8001),
+	  .driver_info = (unsigned long)&imon_ir_raw},
+	/* SoundGraph iMON (IR only) -- sg_imon.inf */
+	{ USB_DEVICE(0x04e8, 0xff30),
+	  .driver_info = (unsigned long)&imon_ir_raw},
+	/* SoundGraph iMON VFD (IR & VFD) -- iMON_VFD.inf */
+	{ USB_DEVICE(0x0aa8, 0xffda),
+	  .driver_info = (unsigned long)&imon_ir_raw},
+	/* SoundGraph iMON SS (IR & VFD) -- iMON_SS.inf */
+	{ USB_DEVICE(0x15c2, 0xffda),
+	  .driver_info = (unsigned long)&imon_ir_raw},
 	{}
 };
 

@@ -1577,11 +1600,94 @@ static int imon_parse_press_type(struct imon_context *ictx,
 /**
  * Process the incoming packet
  */
-static void imon_incoming_packet(struct imon_context *ictx,
+/**
+ * Convert bit count to time duration (in us) and submit
+ * the value to lirc_dev.
+ */
+static void submit_data(struct imon_context *context)
+{
+	DEFINE_IR_RAW_EVENT(ev);
+
+	ev.pulse = context->rx.prev_bit;
+	ev.duration = US_TO_NS(context->rx.count * BIT_DURATION);
+	ir_raw_event_store_with_filter(context->rdev, &ev);
+}
+
+/**
+ * Process the incoming packet
+ */
+static void imon_incoming_ir_raw(struct imon_context *context,
 				 struct urb *urb, int intf)
 {
 	int len = urb->actual_length;
 	unsigned char *buf = urb->transfer_buffer;
+	struct device *dev = context->dev;
+	int octet, bit;
+	unsigned char mask;
+
+	if (len != 8) {
+		dev_warn(dev, "imon %s: invalid incoming packet size (len = %d, intf%d)\n",
+			 __func__, len, intf);
+		return;
+	}
+
+	if (debug)
+		dev_info(dev, "raw packet: %*ph\n", len, buf);
+	/*
+	 * Translate received data to pulse and space lengths.
+	 * Received data is active low, i.e. pulses are 0 and
+	 * spaces are 1.
+	 *
+	 * My original algorithm was essentially similar to
+	 * Changwoo Ryu's with the exception that he switched
+	 * the incoming bits to active high and also fed an
+	 * initial space to LIRC at the start of a new sequence
+	 * if the previous bit was a pulse.
+	 *
+	 * I've decided to adopt his algorithm.
+	 */
+
+	if (buf[7] == 1 && context->rx.initial_space) {
+		/* LIRC requires a leading space */
+		context->rx.prev_bit = 0;
+		context->rx.count = 4;
+		submit_data(context);
+		context->rx.count = 0;
+	}
+
+	for (octet = 0; octet < 5; ++octet) {
+		mask = 0x80;
+		for (bit = 0; bit < 8; ++bit) {
+			int curr_bit = !(buf[octet] & mask);
+
+			if (curr_bit != context->rx.prev_bit) {
+				if (context->rx.count) {
+					submit_data(context);
+					context->rx.count = 0;
+				}
+				context->rx.prev_bit = curr_bit;
+			}
+			++context->rx.count;
+			mask >>= 1;
+		}
+	}
+
+	if (buf[7] == 10) {
+		if (context->rx.count) {
+			submit_data(context);
+			context->rx.count = 0;
+		}
+		context->rx.initial_space = context->rx.prev_bit;
+	}
+
+	ir_raw_event_handle(context->rdev);
+}
+
+static void imon_incoming_scancode(struct imon_context *ictx,
+				   struct urb *urb, int intf)
+{
+	int len = urb->actual_length;
+	unsigned char *buf = urb->transfer_buffer;
 	struct device *dev = ictx->dev;
 	unsigned long flags;
 	u32 kc;

@@ -1761,7 +1867,10 @@ static void usb_rx_callback_intf0(struct urb *urb)
 		break;
 
 	case 0:
-		imon_incoming_packet(ictx, urb, intfnum);
+		if (ictx->rdev->driver_type == RC_DRIVER_IR_RAW)
+			imon_incoming_ir_raw(ictx, urb, intfnum);
+		else
+			imon_incoming_scancode(ictx, urb, intfnum);
 		break;
 
 	default:

@@ -1802,7 +1911,10 @@ static void usb_rx_callback_intf1(struct urb *urb)
 		break;
 
 	case 0:
-		imon_incoming_packet(ictx, urb, intfnum);
+		if (ictx->rdev->driver_type == RC_DRIVER_IR_RAW)
+			imon_incoming_ir_raw(ictx, urb, intfnum);
+		else
+			imon_incoming_scancode(ictx, urb, intfnum);
 		break;
 
 	default:

@@ -1910,11 +2022,14 @@ static void imon_set_display_type(struct imon_context *ictx)
 		case 0x0041:
 		case 0x0042:
 		case 0x0043:
+		case 0x8001:
+		case 0xff30:
 			configured_display_type = IMON_DISPLAY_TYPE_NONE;
 			ictx->display_supported = false;
 			break;
 		case 0x0036:
 		case 0x0044:
+		case 0xffda:
 		default:
 			configured_display_type = IMON_DISPLAY_TYPE_VFD;
 			break;

@@ -1939,7 +2054,8 @@ static struct rc_dev *imon_init_rdev(struct imon_context *ictx)
 	const unsigned char fp_packet[] = { 0x40, 0x00, 0x00, 0x00,
 					    0x00, 0x00, 0x00, 0x88 };
 
-	rdev = rc_allocate_device(RC_DRIVER_SCANCODE);
+	rdev = rc_allocate_device(ictx->dev_descr->flags & IMON_IR_RAW ?
+				  RC_DRIVER_IR_RAW : RC_DRIVER_SCANCODE);
 	if (!rdev) {
 		dev_err(ictx->dev, "remote control dev allocation failed\n");
 		goto out;

@@ -1957,7 +2073,11 @@ static struct rc_dev *imon_init_rdev(struct imon_context *ictx)
 	rdev->dev.parent = ictx->dev;
 
 	rdev->priv = ictx;
-	rdev->allowed_protocols = RC_BIT_OTHER | RC_BIT_RC6_MCE; /* iMON PAD or MCE */
+	if (ictx->dev_descr->flags & IMON_IR_RAW)
+		rdev->allowed_protocols = RC_BIT_ALL_IR_DECODER;
+	else
+		/* iMON PAD or MCE */
+		rdev->allowed_protocols = RC_BIT_OTHER | RC_BIT_RC6_MCE;
 	rdev->change_protocol = imon_ir_change_protocol;
 	rdev->driver_name = MOD_NAME;
 

@@ -1975,7 +2095,8 @@ static struct rc_dev *imon_init_rdev(struct imon_context *ictx)
 
 	imon_set_display_type(ictx);
 
-	if (ictx->rc_type == RC_BIT_RC6_MCE)
+	if (ictx->rc_type == RC_BIT_RC6_MCE ||
+	    ictx->dev_descr->flags & IMON_IR_RAW)
 		rdev->map_name = RC_MAP_IMON_MCE;
 	else
 		rdev->map_name = RC_MAP_IMON_PAD;

979 lines not on this page · raw message