Configure USB Ethernet mac for omap4 and 5
v2 cover Configure USB Ethernet mac for omap4 and 5
Hi,
Here are these patches reposted using the hub naming.
Regards,
Tony
Tony Lindgren (3):
ARM: dts: pandaboard: Allow bootloader to configure USB Ethernet MAC
ARM: dts: omap5-uevm: Allow bootloader to configure USB Ethernet MAC
ARM: dts: omap5-igep0050: Allow bootloader to configure USB Ethernet
MAC
arch/arm/boot/dts/omap4-panda-common.dtsi | 16 ++++++++++++++++ arch/arm/boot/dts/omap5-igep0050.dts | 21 +++++++++++++++++++++ arch/arm/boot/dts/omap5-uevm.dts | 21 +++++++++++++++++++++ 3 files changed, 58 insertions(+)
Signature · 5 lines
2.11.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): 20170105163703.1982-1-tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org
PATCH v2 1/3 ARM: dts: pandaboard: Allow bootloader to configure USB Ethernet MAC
Inspired by a patch for beagleboard xm by Laurent Pinchart <laurent.pinchart-ryLnwIuWjnjg/[email protected]>, similar patch also works for pandaboard. The only difference is that the hub is address 1 instead
of 2.
--- arch/arm/boot/dts/omap4-panda-common.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
arch/arm/boot/dts/omap4-panda-common.dtsi +16 -0
@@ -16,6 +16,7 @@ aliases { display0 = &dvi0; display1 = &hdmi0; + ethernet = ðernet; }; leds: leds {
@@ -520,6 +521,21 @@ &usbhsehci { phys = <&hsusb1_phy>; + + #address-cells = <1>; + #size-cells = <0>; + + hub@1 { + compatible = "usb424,9514"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet: usbether@1 { + compatible = "usb424,ec00"; + reg = <1>; + }; + }; }; &dss {
Signature · 5 lines
2.11.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
PATCH v2 2/3 ARM: dts: omap5-uevm: Allow bootloader to configure USB Ethernet MAC
In reply to a message not in the archiveNote that with 9730 the wiring is different compared to 9514 found on beagleboard xm for example.
On beagleboard xm we have:
/sys/bus/usb/devices/1-2 hub/sys/bus/usb/devices/1-2.1 9514
While on omap5-uevm we have:
/sys/bus/usb/devices/1-2 hub/sys/bus/usb/devices/1-3 9730
--- arch/arm/boot/dts/omap5-uevm.dts | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)
arch/arm/boot/dts/omap5-uevm.dts +21 -0
@@ -18,6 +18,10 @@ reg = <0 0x80000000 0 0x7f000000>; /* 2032 MB */ }; + aliases { + ethernet = ðernet; + }; + leds { compatible = "gpio-leds"; led1 {
@@ -164,6 +168,23 @@ >; }; +&usbhsehci { + #address-cells = <1>; + #size-cells = <0>; + + hub@2 { + compatible = "usb424,3503"; + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + ethernet: usbether@3 { + compatible = "usb424,9730"; + reg = <3>; + }; +}; + &wlcore { compatible = "ti,wl1837"; };
Signature · 5 lines
2.11.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
PATCH v2 3/3 ARM: dts: omap5-igep0050: Allow bootloader to configure USB Ethernet MAC
In reply to a message not in the archiveThis is slightly different wiring compared to omap5-uevm or pandaboard:
/sys/bus/usb/devices/3-2 hub/sys/bus/usb/devices/3-2.3 7500
--- arch/arm/boot/dts/omap5-igep0050.dts | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)
arch/arm/boot/dts/omap5-igep0050.dts +21 -0
@@ -19,6 +19,10 @@ reg = <0x0 0x80000000 0 0x7f000000>; /* 2032 MB */ }; + aliases { + ethernet = ðernet; + }; + gpio_keys { compatible = "gpio-keys"; pinctrl-0 = <&power_button_pin>;
@@ -116,3 +120,20 @@ OMAP5_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE6) /* perslimbus2_clock.gpio5_145 */ >; }; + +&usbhsehci { + #address-cells = <1>; + #size-cells = <0>; + + hub@2 { + compatible = "usb424,3503"; + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet: usbether@3 { + compatible = "usb424,7500"; + reg = <3>; + }; + }; +};
Signature · 5 lines
2.11.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html